ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 300k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (-269 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d880
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
8139too Fast Ethernet driver 0.9.28
SCSI subsystem initialized
libata version 2.20 loaded.
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000d400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfbe37c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 20 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xe800, 00:14:2a:3f:73:ca, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
ata_piix 0000:00:1f.2: version 2.10ac1
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
scsi0 : ata_piix
ata1.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133
ata1.00: 160836480 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi1 : ata_piix
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8527B 1.01 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 19 (level, low) -> IRQ 17
eth0: Compex RL2000 found at 0xec00, IRQ 17, 00:80:48:C4:FA:42.
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 915G Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
input: PC Speaker as /class/input/input1
intel_rng: FWH not detected
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
Unable to find swap-space signature
Adding 554168k swap on /dev/sda5. Priority:-1 extents:1 across:554168k
EXT3 FS on sda6, internal journal
loop: loaded (max 8 devices)
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
[drm] Initialized i915 1.6.0 20060119 on minor 0
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
fuse init (API version 7.8)
Unable to find swap-space signature
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 4928 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 4928 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 4928 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 4928 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 4928 bytes, v3).
bootsplash: status on console 5 changed to on
NTFS driver 2.1.28 [Flags: R/W MODULE].
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda7, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
ext3_orphan_cleanup: deleting unreferenced inode 1189058
ext3_orphan_cleanup: deleting unreferenced inode 1189168
EXT3-fs: sda10: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth0: no IPv6 routers present
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver cdc_ether
usb 2-2: bad CDC descriptors
usbcore: registered new interface driver rndis_host
cdc_acm 2-2:1.8: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
usb 2-2: USB disconnect, address 2
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access PQ: 0 ANSI: 0
SCSI device sdb: 245919 512-byte hdwr sectors (126 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 245919 512-byte hdwr sectors (126 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
sdb:
sd 2:0:0:0: Attached scsi removable disk sdb
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb 2-2: reset full speed USB device using uhci_hcd and address 3
usb 2-2: device descriptor read/64, error -71
usb 2-2: device descriptor read/64, error -71
usb 2-2: reset full speed USB device using uhci_hcd and address 3
usb 2-2: reset full speed USB device using uhci_hcd and address 3
usb 2-2: device descriptor read/64, error -71
usb 2-2: reset full speed USB device using uhci_hcd and address 3
usb 2-2: device descriptor read/64, error -71
usb 2-2: device descriptor read/64, error -71
usb 2-2: reset full speed USB device using uhci_hcd and address 3
usb 2-2: device descriptor read/64, error -71
usb 2-2: device descriptor read/64, error -71
usb 2-2: USB disconnect, address 3
VFS: busy inodes on changed media.
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
scsi 2:0:0:0: rejecting I/O to dead device
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
usb 2-2: new full speed USB device using uhci_hcd and address 4
usb 2-2: configuration #1 chosen from 1 choice
cdc_acm 2-2:1.8: ttyACM0: USB ACM device
usb 2-2: bad CDC descriptors
usb 2-2: USB disconnect, address 4
usb 2-2: new full speed USB device using uhci_hcd and address 5
usb 2-2: configuration #1 chosen from 1 choice
cdc_acm 2-2:1.8: ttyACM0: USB ACM device
usb 2-2: bad CDC descriptors
usb 2-2: USB disconnect, address 5
usb 2-2: new full speed USB device using uhci_hcd and address 6
usb 2-2: configuration #1 chosen from 1 choice
cdc_acm 2-2:1.8: ttyACM0: USB ACM device
usb 2-2: bad CDC descriptors
usb 2-2: USB disconnect, address 6
PPP generic driver version 2.4.2
NET: Registered protocol family 24
usb 2-2: new full speed USB device using uhci_hcd and address 7
usb 2-2: configuration #1 chosen from 1 choice
cdc_acm 2-2:1.8: ttyACM0: USB ACM device
usb 2-2: bad CDC descriptors
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: usbfs: interface 8 claimed by cdc_acm while 'python' sets config #1
usb 2-2: USB disconnect, address 7