rendered paste bodyþdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID xx-xx.xx.xx.xx.xx.xx-xx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/o
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 149536
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 1057.2038 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Bus Fault @ 0x01feb1c0, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01fadd98 Unknown values in msr
NIP: 01FEB1C0 XER: C000227F LR: 01FEA9EC REGS: 01fadd98 TRAP: 0200 DAR: 00009002
MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 00000009 01FADE88 00000000 000002D0 00000038 08100000 C80FB8C0 00000000
GPR08: C80FB8C0 00003D29 01FFBDD8 00000120 00008627 00031B58 01FFB700 00000005
GPR16: 0000002D 01FF85D4 00000000 01FFBDD4 00000020 00000100 00000008 01FFC2D4
GPR24: 01FFBED4 FFFFFBA8 FFFFEA2B 4D82D820 60000260 01FADF94 01FFC424 00000000
Call backtrace:
01FEA694 01FE94D0 01FE930C 01FE7690 01FDAE1C 01FD43B0
machine check
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID xx-xx.xx.xx.xx.xx.xx-xx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Fþdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID xx-xx.xx.xx.xx.xx.xx-xx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x20000
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> dl 800000
S Record Load, offset: 800000
reset
dbox2:root> debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID xx-xx.xx.xx.xx.xx.xx-xx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> dl 800000
S Record Load, offset: 800
dl: start address 0x800000
dbox2:root>
dbox2:root> chorus 800000
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Feb 27 2005 - 07:41:57)
CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 1057.2038 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
BOOTP broadcast 2
Abort
*** ERROR: `serverip' not
can't find logo
BOOTP broadcast 1
Abort
*** ERROR: `serverip' not set
can't find logo
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
*** ERROR: `serverip' not set
......................................................................
Un-Protected 70 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> loadb 120000 115200
## Switch baudrate to 115200 bps and press ENTER ...
## Ready for binary (kermit) download to 0x00120000 at 115200 bps...
## Total Size = 0x007e0000 = 8257536 Bytes
## Start Addr = 0x00120000
## Switch baudrate to 9600 bps and press ESC ...
=> protect off 10020000 107fffff
......................................................................
Un-Protected 70 sectors
=> erase 10020000 107fffff
done
Erased 70 sectors
=> cp.l 120000 10020000 1f8000
Copy to Flash... done
=>