rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7d3800 (usable)
[ 0.000000] BIOS-e820: 000000001f7d3800 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 128979) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128979
[ 0.000000] HighMem 128979 -> 128979
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128979
[ 0.000000] On node 0 totalpages: 128979
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 123908 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FC9B0 checksum 0
[ 0.000000] ACPI: RSDP 000FC9B0, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 1F7D3FD3, 0040 (r1 DELL CPi R 27D50716 ASL 61)
[ 0.000000] ACPI: FACP 1F7D4C00, 0074 (r1 DELL CPi R 27D50716 ASL 61)
[ 0.000000] ACPI: DSDT 1F7D5800, 3088 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
[ 0.000000] ACPI: FACS 1F7E4000, 0040
[ 0.000000] ACPI: APIC 1F7D5400, 0068 (r1 DELL CPi R 27D50716 ASL 47)
[ 0.000000] ACPI: MCFG 1F7D53C0, 003E (r16 DELL CPi R 27D50716 ASL 61)
[ 0.000000] ACPI: BOOT 1F7D4FC0, 0028 (r1 DELL CPi R 27D50716 ASL 61)
[ 0.000000] ACPI: SSDT 1F7D43E6, 02C2 (r1 PmRef Cpu0Ist 3000 INTL 20030522)
[ 0.000000] ACPI: SSDT 1F7D420E, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522)
[ 0.000000] ACPI: SSDT 1F7D4013, 01FB (r1 PmRef CpuPm 3000 INTL 20030522)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Built 1 zonelists. Total pages: 127972
[ 0.000000] Kernel command line: root=UUID=22cbd86c-3b5d-4da2-b7ff-ae7d31f496c3 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1596.153 MHz processor.
[ 4.189895] Console: colour VGA+ 80x25
[ 4.190135] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 4.190388] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 4.203390] Memory: 499980k/515916k available (2015k kernel code, 15360k reserved, 915k data, 364k init, 0k highmem)
[ 4.203402] virtual kernel memory layout:
[ 4.203403] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 4.203405] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 4.203406] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 4.203407] lowmem : 0xc0000000 - 0xdf7d3000 ( 503 MB)
[ 4.203409] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 4.203410] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 4.203411] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 4.203415] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 4.203458] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 4.283413] Calibrating delay using timer specific routine.. 3195.63 BogoMIPS (lpj=6391270)
[ 4.283441] Security Framework v1.0.0 initialized
[ 4.283451] SELinux: Disabled at boot.
[ 4.283467] Mount-cache hash table entries: 512
[ 4.283608] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[ 4.283622] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 4.283625] CPU: L2 cache: 2048K
[ 4.283628] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000
[ 4.283638] Compat vDSO mapped to ffffe000.
[ 4.283651] Checking 'hlt' instruction... OK.
[ 4.299506] SMP alternatives: switching to UP code
[ 4.299708] Freeing SMP alternatives: 11k freed
[ 4.299982] Early unpacking initramfs... done
[ 4.663927] ACPI: Core revision 20070126
[ 4.663991] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 4.668476] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
[ 4.668504] Total of 1 processors activated (3195.63 BogoMIPS).
[ 4.668698] ENABLING IO-APIC IRQs
[ 4.668900] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 4.814998] Brought up 1 CPUs
[ 4.815119] Booting paravirtualized kernel on bare hardware
[ 4.815191] Time: 0:33:04 Date: 01/15/108
[ 4.815216] NET: Registered protocol family 16
[ 4.815300] EISA bus registered
[ 4.815315] ACPI: bus type pci registered
[ 4.852900] PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10
[ 4.852902] PCI: Using configuration type 1
[ 4.852904] Setting up standard PCI resources
[ 4.857694] ACPI: EC: Look up EC in DSDT
[ 4.862673] ACPI: Interpreter enabled
[ 4.862677] ACPI: (supports S0 S3 S4 S5)
[ 4.862693] ACPI: Using IOAPIC for interrupt routing
[ 4.875150] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 4.875165] PCI: Probing PCI hardware (bus 00)
[ 4.875851] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 4.875856] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 4.876401] PCI: Transparent bridge - 0000:00:1e.0
[ 4.876485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.876965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 4.886475] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 4.886580] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 4.886681] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 4.886782] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
[ 4.886871] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 4.886983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 4.887078] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 4.887175] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 4.887184] pnp: PnP ACPI init
[ 4.887191] ACPI: bus type pnp registered
[ 4.912941] pnp: PnP ACPI: found 12 devices
[ 4.912943] ACPI: ACPI bus type pnp unregistered
[ 4.912948] PnPBIOS: Disabled by ACPI PNP
[ 4.912992] PCI: Using ACPI for IRQ routing
[ 4.912994] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 4.942832] NET: Registered protocol family 8
[ 4.942834] NET: Registered protocol family 20
[ 4.942850] Time: tsc clocksource has been installed.
[ 4.942892] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 4.942895] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 4.942899] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 4.942902] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 4.942908] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 4.942911] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
[ 4.942914] pnp: 00:02: ioport range 0x1008-0x100f has been reserved
[ 4.942919] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 4.942922] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 4.942925] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 4.942929] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 4.942932] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 4.942935] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 4.942941] pnp: 00:08: ioport range 0x900-0x90f has been reserved
[ 4.942944] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 4.942947] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 4.942950] pnp: 00:08: ioport range 0x930-0x93f has been reserved
[ 4.942953] pnp: 00:08: ioport range 0x940-0x97f has been reserved
[ 4.942958] pnp: 00:0b: ioport range 0x7b0-0x7bb has been reserved
[ 4.942961] pnp: 00:0b: ioport range 0x7c0-0x7df has been reserved
[ 4.942964] pnp: 00:0b: ioport range 0xbb0-0xbbb has been reserved
[ 4.942967] pnp: 00:0b: ioport range 0xbc0-0xbdf has been reserved
[ 4.942970] pnp: 00:0b: ioport range 0xfb0-0xfbb has been reserved
[ 4.942973] pnp: 00:0b: ioport range 0xfc0-0xfdf has been reserved
[ 4.942976] pnp: 00:0b: ioport range 0x13b0-0x13bb has been reserved
[ 4.942979] pnp: 00:0b: ioport range 0x13c0-0x13df has been reserved
[ 4.973241] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[ 4.973244] IO window: 00002000-000020ff
[ 4.973249] IO window: 00002400-000024ff
[ 4.973254] PREFETCH window: 30000000-33ffffff
[ 4.973259] MEM window: 34000000-37ffffff
[ 4.973264] PCI: Bridge: 0000:00:1e.0
[ 4.973267] IO window: 2000-2fff
[ 4.973274] MEM window: dfd00000-dfdfffff
[ 4.973279] PREFETCH window: 30000000-33ffffff
[ 4.973298] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 4.973315] PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
[ 4.973321] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 4.973339] NET: Registered protocol family 2
[ 5.010818] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 5.010853] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 5.011014] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 5.011124] TCP: Hash tables configured (established 16384 bind 16384)
[ 5.011127] TCP reno registered
[ 5.022898] checking if image is initramfs... it is
[ 5.474405] Switched to high resolution mode on CPU 0
[ 5.734145] Freeing initrd memory: 7051k freed
[ 5.734325] Simple Boot Flag at 0x79 set to 0x1
[ 5.734595] audit: initializing netlink socket (disabled)
[ 5.734612] audit(1203035584.136:1): initialized
[ 5.736579] VFS: Disk quotas dquot_6.5.1
[ 5.736634] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.736736] io scheduler noop registered
[ 5.736739] io scheduler anticipatory registered
[ 5.736742] io scheduler deadline registered
[ 5.736758] io scheduler cfq registered (default)
[ 5.736776] Boot video device is 0000:00:02.0
[ 5.737021] isapnp: Scanning for PnP cards...
[ 6.091027] isapnp: No Plug & Play device found
[ 6.117355] Real Time Clock Driver v1.12ac
[ 6.117494] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 6.118223] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 6.118233] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 6.118798] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 6.119027] input: Macintosh mouse button emulation as /class/input/input0
[ 6.119102] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 6.124320] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.124326] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.124483] mice: PS/2 mouse device common for all mice
[ 6.124587] EISA: Probing bus 0 at eisa.0
[ 6.124598] Cannot allocate resource for EISA slot 1
[ 6.124601] Cannot allocate resource for EISA slot 2
[ 6.124626] EISA: Detected 0 cards.
[ 6.124732] TCP cubic registered
[ 6.124752] NET: Registered protocol family 1
[ 6.124779] Using IPI No-Shortcut mode
[ 6.124991] Magic number: 12:127:557
[ 6.125054] hash matches device ptya3
[ 6.125137] hash matches device PNP0C01:03
[ 6.125362] Freeing unused kernel memory: 364k freed
[ 6.161812] input: AT Translated Set 2 keyboard as /class/input/input1
[ 7.311473] AppArmor: AppArmor initialized<5>audit(1203035585.636:2): type=1505 info="AppArmor initialized" pid=1203
[ 7.316824] fuse init (API version 7.8)
[ 7.322025] Failure registering capabilities with primary security module.
[ 7.337143] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 7.337149] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 7.337161] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 7.341721] ACPI: Thermal Zone [THM] (62 C)
[ 7.707070] usbcore: registered new interface driver usbfs
[ 7.707096] usbcore: registered new interface driver hub
[ 7.707115] usbcore: registered new device driver usb
[ 7.707907] USB Universal Host Controller Interface driver v3.0
[ 7.707982] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 7.707997] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 7.708002] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.708215] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 7.708247] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bf80
[ 7.708364] usb usb1: configuration #1 chosen from 1 choice
[ 7.708388] hub 1-0:1.0: USB hub found
[ 7.708393] hub 1-0:1.0: 2 ports detected
[ 7.814876] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 7.814892] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 7.814897] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.814920] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 7.814955] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 7.815060] usb usb2: configuration #1 chosen from 1 choice
[ 7.815087] hub 2-0:1.0: USB hub found
[ 7.815094] hub 2-0:1.0: 2 ports detected
[ 7.868646] SCSI subsystem initialized
[ 7.874140] libata version 2.21 loaded.
[ 7.916369] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 7.916385] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 7.916390] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.916415] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 7.916448] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40
[ 7.916552] usb usb3: configuration #1 chosen from 1 choice
[ 7.916581] hub 3-0:1.0: USB hub found
[ 7.916586] hub 3-0:1.0: 2 ports detected
[ 8.020231] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 16
[ 8.020247] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 8.020251] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.020276] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 8.020312] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bf20
[ 8.020414] usb usb4: configuration #1 chosen from 1 choice
[ 8.020444] hub 4-0:1.0: USB hub found
[ 8.020450] hub 4-0:1.0: 2 ports detected
[ 3.772000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.776000] Time: acpi_pm clocksource has been installed.
[ 3.820000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 18
[ 3.820000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.820000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.820000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.820000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.820000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.820000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800
[ 3.824000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.824000] usb usb5: configuration #1 chosen from 1 choice
[ 3.824000] hub 5-0:1.0: USB hub found
[ 3.824000] hub 5-0:1.0: 8 ports detected
[ 3.928000] b44.c:v1.01 (Jun 16, 2006)
[ 3.928000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 3.928000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:22:de:66:3e
[ 3.928000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19
[ 3.984000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfdfc800-dfdfcfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.992000] ata_piix 0000:00:1f.2: version 2.11
[ 3.992000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.148000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 4.148000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.148000] scsi0 : ata_piix
[ 4.148000] scsi1 : ata_piix
[ 4.148000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 4.148000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 4.164000] Clocksource tsc unstable (delta = -562751105 ns)
[ 4.312000] ata1.00: ATA-6: Hitachi HTS541060G9AT00, MB3OA61A, max UDMA/100
[ 4.312000] ata1.00: 117210240 sectors, multi 8: LBA48
[ 4.312000] ata1.00: applying bridge limits
[ 4.328000] ata1.00: configured for UDMA/100
[ 4.564000] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 4.648000] ata2.00: ATAPI: SONY DVD+/-RW DW-Q58A, UDS1, max UDMA/33
[ 4.744000] usb 4-2: configuration #1 chosen from 1 choice
[ 4.760000] usbcore: registered new interface driver hiddev
[ 4.812000] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /class/input/input2
[ 4.812000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1d.3-2
[ 4.812000] usbcore: registered new interface driver usbhid
[ 4.812000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 4.820000] ata2.00: configured for UDMA/33
[ 4.824000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54106 MB3O PQ: 0 ANSI: 5
[ 4.824000] scsi 1:0:0:0: CD-ROM SONY DVD+-RW DW-Q58A UDS1 PQ: 0 ANSI: 5
[ 4.840000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 4.840000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.840000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.840000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.840000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 4.840000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.840000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.840000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.840000] sda: sda1 sda2 sda3 sda4
[ 4.884000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.888000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.888000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.912000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.916000] Uniform CD-ROM driver Revision: 3.20
[ 4.916000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.148000] Attempting manual resume
[ 5.148000] swsusp: Resume From Partition 8:2
[ 5.148000] PM: Checking swsusp image.
[ 5.148000] PM: Resume from disk failed.
[ 5.160000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.160000] EXT3-fs: write access will be enabled during recovery.
[ 5.260000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[384fc000218a7030]
[ 9.004000] kjournald starting. Commit interval 5 seconds
[ 9.004000] EXT3-fs: recovery complete.
[ 9.004000] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.788000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.804000] agpgart: Detected an Intel 915GM Chipset.
[ 16.804000] agpgart: Detected 7932K stolen memory.
[ 16.824000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 17.236000] NET: Registered protocol family 17
[ 17.820000] intel_rng: FWH not detected
[ 17.872000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0188]
[ 17.896000] sdhci: Secure Digital Host Controller Interface driver
[ 17.896000] sdhci: Copyright(c) Pierre Ossman
[ 17.932000] iTCO_vendor_support: vendor-support=0
[ 17.936000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 17.936000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 17.936000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.952000] ieee80211_crypt: registered algorithm 'NULL'
[ 17.952000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 17.952000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 18.000000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 18.000000] Socket status: 30000006
[ 18.000000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 18.000000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 18.000000] cs: IO port probe 0x2000-0x2fff: clean.
[ 18.000000] pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
[ 18.000000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 18.008000] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
[ 18.008000] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 17
[ 18.008000] mmc0: SDHCI at 0xdfdfc700 irq 17 DMA
[ 18.276000] input: PC Speaker as /class/input/input3
[ 18.308000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[ 18.308000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 18.308000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 18.308000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 18.656000] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[ 18.712000] input: PS/2 Mouse as /class/input/input4
[ 18.728000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
[ 18.780000] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 18.780000] b44: eth0: Flow control is off for TX and off for RX.
[ 19.092000] cs: IO port probe 0x100-0x3af: clean.
[ 19.096000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 19.096000] cs: IO port probe 0x820-0x8ff: clean.
[ 19.096000] cs: IO port probe 0xc00-0xcf7: clean.
[ 19.096000] cs: IO port probe 0xa00-0xaff: clean.
[ 19.128000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 18
[ 19.128000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 19.956000] intel8x0_measure_ac97_clock: measured 55435 usecs
[ 19.956000] intel8x0: clocking to 48000
[ 20.648000] loop: module loaded
[ 20.712000] lp: driver loaded but no devices found
[ 20.804000] Adding 522104k swap on /dev/sda2. Priority:-1 extents:1 across:522104k
[ 21.100000] EXT3 FS on sda3, internal journal
[ 21.696000] NET: Registered protocol family 10
[ 21.696000] lo: Disabled Privacy Extensions
[ 24.752000] kjournald starting. Commit interval 5 seconds
[ 24.752000] EXT3 FS on sda4, internal journal
[ 24.752000] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.824000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 25.824000] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 25.824000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 25.848000] No dock devices found.
[ 25.892000] ACPI: AC Adapter [AC] (on-line)
[ 25.996000] input: Lid Switch as /class/input/input6
[ 26.000000] ACPI: Lid Switch [LID]
[ 26.044000] input: Power Button (CM) as /class/input/input7
[ 26.048000] ACPI: Power Button (CM) [PBTN]
[ 26.092000] input: Sleep Button (CM) as /class/input/input8
[ 26.096000] ACPI: Sleep Button (CM) [SBTN]
[ 26.416000] ACPI: Battery Slot [BAT0] (battery present)
[ 27.756000] ppdev: user-space parallel port driver
[ 27.948000] audit(1203032012.222:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4793 profile="/usr/sbin/cupsd"
[ 28.076000] apm: BIOS not found.
[ 28.292000] Failure registering capabilities with primary security module.
[ 28.512000] Bluetooth: Core ver 2.11
[ 28.512000] NET: Registered protocol family 31
[ 28.512000] Bluetooth: HCI device and connection manager initialized
[ 28.512000] Bluetooth: HCI socket layer initialized
[ 28.536000] Bluetooth: L2CAP ver 2.8
[ 28.536000] Bluetooth: L2CAP socket layer initialized
[ 28.604000] Bluetooth: RFCOMM socket layer initialized
[ 28.604000] Bluetooth: RFCOMM TTY layer initialized
[ 28.604000] Bluetooth: RFCOMM ver 1.8
[ 32.480000] eth0: no IPv6 routers present
[ 32.760000] [drm] Initialized drm 1.1.0 20060810
[ 32.764000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 32.764000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 81.088000] cisco_ipsec: module license 'Proprietary' taints kernel.
[ 81.092000] Cisco Systems VPN Client Version 4.8.01 (0640) kernel module loaded
[ 94.480000] cipsec0: no IPv6 routers present