All pastes #904141 Raw Edit

killruana

public text v1 · immutable
·published 2008-02-14 19:14 UTC
rendered paste body
[    0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Fri Feb 1 04:59:50 UTC 2008 (Ubuntu 2.6.22-14.51-generic)[    0.000000] BIOS-provided physical RAM map:[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)[    0.000000]  BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)[    0.000000]  BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)[    0.000000] 127MB HIGHMEM available.[    0.000000] 896MB LOWMEM available.[    0.000000] found SMP MP-table at 000fb930[    0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used[    0.000000] Zone PFN ranges:[    0.000000]   DMA             0 ->     4096[    0.000000]   Normal       4096 ->   229376[    0.000000]   HighMem    229376 ->   262128[    0.000000] early_node_map[1] active PFN ranges[    0.000000]     0:        0 ->   262128[    0.000000] On node 0 totalpages: 262128[    0.000000]   DMA zone: 32 pages used for memmap[    0.000000]   DMA zone: 0 pages reserved[    0.000000]   DMA zone: 4064 pages, LIFO batch:0[    0.000000]   Normal zone: 1760 pages used for memmap[    0.000000]   Normal zone: 223520 pages, LIFO batch:31[    0.000000]   HighMem zone: 255 pages used for memmap[    0.000000]   HighMem zone: 32497 pages, LIFO batch:7[    0.000000] DMI 2.3 present.[    0.000000] ACPI: RSDP signature @ 0xC00FA940 checksum 0[    0.000000] ACPI: RSDP 000FA940, 0014 (r0 AMI   )[    0.000000] ACPI: RSDT 3FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)[    0.000000] ACPI: FACP 3FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)[    0.000000] ACPI: DSDT 3FFF0120, 32BF (r1    VIA   VIA_K7     1000 MSFT  100000D)[    0.000000] ACPI: FACS 3FFF8000, 0040[    0.000000] ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)[    0.000000] ACPI: PM-Timer IO Port: 0x808[    0.000000] ACPI: Local APIC address 0xfee00000[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)[    0.000000] Processor #0 6:8 APIC version 16[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)[    0.000000] ACPI: IRQ0 used by override.[    0.000000] ACPI: IRQ2 used by override.[    0.000000] ACPI: IRQ9 used by override.[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs[    0.000000] Using ACPI (MADT) for SMP configuration information[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)[    0.000000] Built 1 zonelists.  Total pages: 260081[    0.000000] Kernel command line: root=UUID=d6b9f833-221f-402a-b743-cd057c591e9c ro quiet locale=fr_FR vga=795[    0.000000] mapped APIC to ffffd000 (fee00000)[    0.000000] mapped IOAPIC to ffffc000 (fec00000)[    0.000000] Enabling fast FPU save and restore... done.[    0.000000] Enabling unmasked SIMD FPU exception support... done.[    0.000000] Initializing CPU#0[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)[    0.000000] Detected 2088.165 MHz processor.[  135.284465] Console: colour dummy device 80x25[  135.285269] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)[  135.286634] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[  135.322135] Memory: 1027880k/1048512k available (2015k kernel code, 19948k reserved, 916k data, 364k init, 131008k highmem)[  135.322146] virtual kernel memory layout:[  135.322147]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)[  135.322149]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)[  135.322150]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)[  135.322151]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)[  135.322152]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)[  135.322154]       .data : 0xc02f7e66 - 0xc03dce84   ( 916 kB)[  135.322155]       .text : 0xc0100000 - 0xc02f7e66   (2015 kB)[  135.322159] Checking if this processor honours the WP bit even in supervisor mode... Ok.[  135.322210] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1[  135.402175] Calibrating delay using timer specific routine.. 4180.20 BogoMIPS (lpj=8360404)[  135.402217] Security Framework v1.0.0 initialized[  135.402227] SELinux:  Disabled at boot.[  135.402247] Mount-cache hash table entries: 512[  135.402427] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000[  135.402437] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f[  135.402441] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)[  135.402444] CPU: L2 Cache: 256K (64 bytes/line)[  135.402447] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000[  135.402460] Compat vDSO mapped to ffffe000.[  135.402477] Checking 'hlt' instruction... OK.[  135.418353] SMP alternatives: switching to UP code[  135.418683] Freeing SMP alternatives: 11k freed[  135.419082] Early unpacking initramfs... done[  135.722613] ACPI: Core revision 20070126[  135.722707] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.[  135.724442] CPU0: AMD Athlon(tm) XP 2600+ stepping 01[  135.724467] Total of 1 processors activated (4180.20 BogoMIPS).[  135.725202] ENABLING IO-APIC IRQs[  135.725513] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1[  135.869887] Brought up 1 CPUs[  135.870059] Booting paravirtualized kernel on bare hardware[  135.870146] Time: 21:49:56  Date: 01/12/108[  135.870177] NET: Registered protocol family 16[  135.870290] EISA bus registered[  135.870307] ACPI: bus type pci registered[  135.874256] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1[  135.874259] PCI: Using configuration type 1[  135.874261] Setting up standard PCI resources[  135.878766] ACPI: EC: Look up EC in DSDT[  135.882243] ACPI: Interpreter enabled[  135.882247] ACPI: (supports S0 S1 S4 S5)[  135.882261] ACPI: Using IOAPIC for interrupt routing[  135.886207] ACPI: PCI Root Bridge [PCI0] (0000:00)[  135.886215] PCI: Probing PCI hardware (bus 00)[  135.886852] PCI quirk: region 0800-087f claimed by vt8235 PM[  135.886856] PCI quirk: region 0400-040f claimed by vt8235 SMB[  135.887101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][  135.888631] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)[  135.888715] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)[  135.888795] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)[  135.888875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)[  135.888967] ACPI: Power Resource [URP1] (off)[  135.888993] ACPI: Power Resource [URP2] (off)[  135.889019] ACPI: Power Resource [FDDP] (off)[  135.889044] ACPI: Power Resource [LPTP] (off)[  135.889054] Linux Plug and Play Support v0.97 (c) Adam Belay[  135.889067] pnp: PnP ACPI init[  135.889076] ACPI: bus type pnp registered[  135.891476] pnp: PnP ACPI: found 12 devices[  135.891479] ACPI: ACPI bus type pnp unregistered[  135.891483] PnPBIOS: Disabled by ACPI PNP[  135.891550] PCI: Using ACPI for IRQ routing[  135.891553] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report[  135.893337] NET: Registered protocol family 8[  135.893339] NET: Registered protocol family 20[  135.893422] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved[  135.893822] Time: tsc clocksource has been installed.[  135.923724] PCI: Bridge: 0000:00:01.0[  135.923726]   IO window: disabled.[  135.923731]   MEM window: dde00000-dfefffff[  135.923735]   PREFETCH window: d5d00000-ddcfffff[  135.923752] PCI: Setting latency timer of device 0000:00:01.0 to 64[  135.923765] NET: Registered protocol family 2[  135.953841] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)[  135.954066] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)[  135.956766] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)[  135.957651] TCP: Hash tables configured (established 131072 bind 65536)[  135.957655] TCP reno registered[  135.965934] checking if image is initramfs... it is[  136.581314] Switched to high resolution mode on CPU 0[  136.697590] Freeing initrd memory: 7081k freed[  136.698069] audit: initializing netlink socket (disabled)[  136.698086] audit(1202852995.968:1): initialized[  136.698162] highmem bounce pool size: 64 pages[  136.700031] VFS: Disk quotas dquot_6.5.1[  136.700088] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[  136.700194] io scheduler noop registered[  136.700197] io scheduler anticipatory registered[  136.700199] io scheduler deadline registered[  136.700212] io scheduler cfq registered (default)[  136.700227] PCI: VIA PCI bridge detected. Disabling DAC.[  136.700282] Boot video device is 0000:01:00.0[  136.700471] isapnp: Scanning for PnP cards...[  137.054020] isapnp: No Plug & Play device found[  137.083388] Real Time Clock Driver v1.12ac[  137.083485] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled[  137.083584] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[  137.083872] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A[  137.084685] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[  137.085123] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A[  137.085948] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize[  137.086185] input: Macintosh mouse button emulation as /class/input/input0[  137.086269] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12[  137.086619] serio: i8042 KBD port at 0x60,0x64 irq 1[  137.086625] serio: i8042 AUX port at 0x60,0x64 irq 12[  137.086794] mice: PS/2 mouse device common for all mice[  137.086917] EISA: Probing bus 0 at eisa.0[  137.086955] EISA: Detected 0 cards.[  137.087162] TCP cubic registered[  137.087173] NET: Registered protocol family 1[  137.087196] Using IPI No-Shortcut mode[  137.087377]   Magic number: 12:890:853[  137.087512]   hash matches device ptyv5[  137.088072] Freeing unused kernel memory: 364k freed[  137.128908] input: AT Translated Set 2 keyboard as /class/input/input1[  137.187070] vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 10240k, total 65536k[  137.187077] vesafb: mode is 1280x1024x32, linelength=5120, pages=0[  137.187080] vesafb: protected mode interface info at c000:e710[  137.187082] vesafb: pmi: set display start = c00ce755, set palette = c00ce7da[  137.187084] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 [  137.187097] vesafb: scrolling: redraw[  137.187101] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0[  137.187251] Console: switching to colour frame buffer device 160x64[  137.313897] fb0: VESA VGA frame buffer device[  137.556999] AppArmor: AppArmor initialized<5>audit(1202852996.968:2):  type=1505 info="AppArmor initialized" pid=1183[  137.563945] fuse init (API version 7.8)[  137.569221] Failure registering capabilities with primary security module.[  138.199368] usbcore: registered new interface driver usbfs[  138.199405] usbcore: registered new interface driver hub[  138.199438] usbcore: registered new device driver usb[  138.200457] USB Universal Host Controller Interface driver v3.0[  138.200558] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16[  138.200572] uhci_hcd 0000:00:10.0: UHCI Host Controller[  138.200770] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1[  138.200802] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e400[  138.200952] usb usb1: configuration #1 chosen from 1 choice[  138.200980] hub 1-0:1.0: USB hub found[  138.200992] hub 1-0:1.0: 2 ports detected[  138.264382] SCSI subsystem initialized[  138.269508] libata version 2.21 loaded.[  138.281236] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker[  138.304059] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 16[  138.304075] uhci_hcd 0000:00:10.1: UHCI Host Controller[  138.304102] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2[  138.304128] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e800[  138.304248] usb usb2: configuration #1 chosen from 1 choice[  138.304274] hub 2-0:1.0: USB hub found[  138.304284] hub 2-0:1.0: 2 ports detected[  138.377840] Floppy drive(s): fd0 is 1.44M[  138.412200] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16[  138.412216] uhci_hcd 0000:00:10.2: UHCI Host Controller[  138.412253] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3[  138.412278] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000ec00[  138.412404] usb usb3: configuration #1 chosen from 1 choice[  138.412432] hub 3-0:1.0: USB hub found[  138.412444] hub 3-0:1.0: 2 ports detected[  138.419575] FDC 0 is a post-1991 82077[  138.518450] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16[  138.518472] ehci_hcd 0000:00:10.3: EHCI Host Controller[  138.518533] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4[  138.518587] ehci_hcd 0000:00:10.3: irq 16, io mem 0xdfff7f00[  138.518594] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004[  138.518706] usb usb4: configuration #1 chosen from 1 choice[  138.518736] hub 4-0:1.0: USB hub found[  138.518747] hub 4-0:1.0: 6 ports detected[  138.624124] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2[  138.624132] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx[  138.624950] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 17[  138.628965] eth0: VIA Rhine II at 0x1dc00, 00:0c:76:3b:12:50, IRQ 17.[  138.629677] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.[  138.629959] VP_IDE: IDE controller at PCI slot 0000:00:11.1[  138.629972] ACPI: Unable to derive IRQ for device 0000:00:11.1[  138.629974] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI[  138.629982] VP_IDE: chipset revision 6[  138.629984] VP_IDE: not 100% native mode: will probe irqs later[  138.629996] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1[  138.630005]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA[  138.630017]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA[  138.630024] Probing IDE interface ide0...[  139.043270] hda: Maxtor 6L080P0, ATA DISK drive[  139.323036] hdb: ST3120026A, ATA DISK drive[  139.382636] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14[  139.407925] Probing IDE interface ide1...[  139.550765] usb 4-6: new high speed USB device using ehci_hcd and address 3[  139.683966] usb 4-6: configuration #1 chosen from 1 choice[  139.922466] usb 2-1: new full speed USB device using uhci_hcd and address 2[  140.083518] usb 2-1: configuration #1 chosen from 1 choice[  140.096616] usbcore: registered new interface driver libusual[  140.101758] Initializing USB Mass Storage driver...[  140.101939] scsi0 : SCSI emulation for USB Mass Storage devices[  140.101993] usb-storage: device found at 3[  140.101995] usb-storage: waiting for device to settle before scanning[  140.102015] usbcore: registered new interface driver usb-storage[  140.102018] USB Mass Storage support registered.[  140.270256] hdc: DVDRW IDE 16X, ATAPI CD/DVD-ROM drive[  141.053587] hdd: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive[  141.118083] ide1 at 0x170-0x177,0x376 on irq 15[  141.128215] hda: max request size: 128KiB[  141.145675] hda: 160086528 sectors (81964 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(133)[  141.147269] hda: cache flushes supported[  141.147352]  hda: hda1 hda2 hda3 hda4[  141.174287] hdb: max request size: 512KiB[  141.174911] hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)[  141.175057] hdb: cache flushes supported[  141.175099]  hdb: hdb1[  141.216240] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)[  141.216251] Uniform CD-ROM driver Revision: 3.20[  141.246170] hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)[  141.633559] Attempting manual resume[  141.633564] swsusp: Resume From Partition 3:2[  141.633566] PM: Checking swsusp image.[  141.640649] PM: Resume from disk failed.[  141.651779] ReiserFS: hda3: found reiserfs format "3.6" with standard journal[  141.651792] ReiserFS: hda3: using ordered data mode[  141.662182] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30[  141.663897] ReiserFS: hda3: checking transaction log (hda3)[  145.094361] usb-storage: device scan complete[  145.094850] scsi 0:0:0:0: Direct-Access     Intuix   U3               6.16 PQ: 0 ANSI: 0 CCS[  145.095325] scsi 0:0:0:1: CD-ROM            Intuix   U3               6.16 PQ: 0 ANSI: 0[  145.131533] sd 0:0:0:0: [sda] 1994751 512-byte hardware sectors (1021 MB)[  145.132163] sd 0:0:0:0: [sda] Write Protect is off[  145.132166] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08[  145.132169] sd 0:0:0:0: [sda] Assuming drive cache: write through[  145.134659] sd 0:0:0:0: [sda] 1994751 512-byte hardware sectors (1021 MB)[  145.135283] sd 0:0:0:0: [sda] Write Protect is off[  145.135286] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08[  145.135288] sd 0:0:0:0: [sda] Assuming drive cache: write through[  145.136160]  sda: sda1[  145.138022] sd 0:0:0:0: [sda] Attached SCSI removable disk[  145.143728] sd 0:0:0:0: Attached scsi generic sg0 type 0[  145.143870] sr 0:0:0:1: Attached scsi generic sg1 type 5[  145.170141] sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray[  145.170230] sr 0:0:0:1: Attached scsi CD-ROM sr0[  148.681044] ReiserFS: hda3: replayed 543 transactions in 7 seconds[  148.681241] ReiserFS: hda3: Using r5 hash to sort names[  157.821174] Linux agpgart interface v0.102 (c) Dave Jones[  157.909017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[  158.037278] rt61 1.1.0 CVS 2008020514 http://rt2x00.serialmonkey.com[  158.037351] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18[  158.116900] irda_init()[  158.116929] NET: Registered protocol family 23[  158.558259] input: PC Speaker as /class/input/input2[  159.060978] Linux video capture interface: v2.00[  159.091137] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44[  159.092522] usb 2-1: SN9C10[12] PC Camera Controller detected (vid:pid 0x0C45:0x602E)[  159.169277] RT61: RfIcType= 3[  159.169469] agpgart: Detected VIA KT400/KT400A/KT600 chipset[  159.177125] agpgart: AGP aperture is 128M @ 0xe0000000[  159.177193] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4[  159.211393] usb 2-1: OV7630 image sensor detected[  159.349249] usb 2-1: Initialization succeeded[  159.349363] usb 2-1: V4L2 device registered as /dev/video0[  159.349365] usb 2-1: Optional device control through 'sysfs' interface disabled[  159.349391] usbcore: registered new interface driver sn9c102[  159.399860] usbcore: registered new interface driver gspca[  159.399867] /usr/src/modules/gspca/gspca_core.c: gspca driver 01.00.16 registered[  159.512281] nvidia: module license 'NVIDIA' taints kernel.[  159.770206] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19[  159.770757] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9639  Mon Apr 16 20:20:06 PDT 2007[  159.829372] input: ImPS/2 Generic Wheel Mouse as /class/input/input3[  159.833828] parport_pc 00:0b: reported by Plug and Play ACPI[  159.833934] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA][  160.408129] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20[  160.408275] PCI: Setting latency timer of device 0000:00:11.5 to 64[  160.555577] NET: Registered protocol family 10[  160.555683] lo: Disabled Privacy Extensions[  161.613805] lp0: using parport0 (interrupt-driven).[  161.692592] Adding 1052248k swap on /dev/hda2.  Priority:-1 extents:1 across:1052248k[  169.661076] ReiserFS: hda3: Removing [152419 150589 0x0 SD]..done[  169.661160] ReiserFS: hda3: Removing [104916 125373 0x0 SD]..done[  169.661253] ReiserFS: hda3: Removing [96236 9315 0x0 SD]..done[  169.661333] ReiserFS: hda3: Removing [2 5222 0x0 SD]..done[  169.661365] ReiserFS: hda3: Removing [2 5221 0x0 SD]..done[  169.661392] ReiserFS: hda3: Removing [2 5218 0x0 SD]..done[  169.661419] ReiserFS: hda3: Removing [2 5213 0x0 SD]..done[  169.661479] ReiserFS: hda3: Removing [2 5211 0x0 SD]..done[  169.661504] ReiserFS: hda3: There were 8 uncompleted unlinks/truncates. Completed[  171.228207] wlan0: no IPv6 routers present[  179.171724] ReiserFS: hda4: found reiserfs format "3.6" with standard journal[  179.171743] ReiserFS: hda4: using ordered data mode[  179.176487] ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30[  179.178341] ReiserFS: hda4: checking transaction log (hda4)[  179.210064] ReiserFS: hda4: Using r5 hash to sort names[  179.302648] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive![  183.115078] tun: Universal TUN/TAP device driver, 1.6[  183.115084] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>[  183.117829] tun: Disabled Privacy Extensions[  186.174099] No dock devices found.[  186.271889] input: Power Button (FF) as /class/input/input4[  186.283649] ACPI: Power Button (FF) [PWRF][  186.311594] input: Power Button (CM) as /class/input/input5[  186.311928] ACPI: Power Button (CM) [PWRB][  186.327601] input: Sleep Button (CM) as /class/input/input6[  186.327922] ACPI: Sleep Button (CM) [SLPB][  188.551210] eth0: link down[  188.552238] ADDRCONF(NETDEV_UP): eth0: link is not ready[  189.427866] ppdev: user-space parallel port driver[  189.503981] audit(1202838649.941:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5239 profile="/usr/sbin/cupsd"[  191.335696] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)[  191.335703] apm: overridden by ACPI.[  193.582731] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).[  193.763704] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory[  193.764164] NFSD: starting 90-second grace period[  195.858890] vboxdrv: Trying to deactivate the NMI watchdog permanently...[  195.858897] vboxdrv: Successfully done.[  195.862424] vboxdrv: Successfully loaded version 1.5.4 (interface 0x00050002).[  196.507852] Failure registering capabilities with primary security module.[  196.813127] Bluetooth: Core ver 2.11[  196.813280] NET: Registered protocol family 31[  196.813283] Bluetooth: HCI device and connection manager initialized[  196.813287] Bluetooth: HCI socket layer initialized[  196.835670] Bluetooth: L2CAP ver 2.8[  196.835677] Bluetooth: L2CAP socket layer initialized[  196.913104] Bluetooth: RFCOMM socket layer initialized[  196.913223] Bluetooth: RFCOMM TTY layer initialized[  196.913226] Bluetooth: RFCOMM ver 1.8[  199.157306] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.[  199.157451] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode[  199.157596] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode[  226.654425] NVRM: Xid (0001:00): 6, PE0000 1794 ff636363 0000fd00 ff9a9797 ffd9d4d4[  229.016824] NVRM: Xid (0001:00): 6, PE0000 1e1c ff2f281c 0000fc00 ff1f1e1c ffeae5e5[  241.760511] NVRM: Xid (0001:00): 6, PE0000 0000 00ffffff 0000f898 60000000 00ffffff[  246.434099] NVRM: Xid (0001:00): 6, PE0000 05cc 00c5c5cf 0000f900 00c5c5cf 00c5c5cf[  257.652781] NVRM: Xid (0001:00): 6, PE0000 0868 ff6a6868 0000fc80 ff6a6868 ffe7e5e5[  262.096629] NVRM: Xid (0001:00): 6, PE0000 10f0 fff0f0f0 0000fdc0 fff0f0f0 ff191919[  263.527869] NVRM: Xid (0001:00): 6, PE0000 12f0 fff2f2f2 00001008 00000000 00ffffff[  274.671683] NVRM: Xid (0001:00): 6, PE0000 0544 ffd9d9d9 00000008 00000000 fff7f7f7[  275.027706] NVRM: Xid (0001:00): 13, 0000 01019700 00001796 0000021c 03f90008 00000002[  288.380200] NVRM: Xid (0001:00): 13, 0000 01019700 00001796 0000021c 03f90008 00000002[  305.452420] NVRM: Xid (0001:00): 6, PE0000 1bb8 ffbbbbbb 0000fd80 ffbbbbbb ffc8c8c8[  305.475790] NVRM: Xid (0001:00): 6, PE0000 15b4 ffb5b5b5 00005058 00000000 00100284[  305.478180] NVRM: Xid (0001:00): 6, PE0000 0418 ff646464 00000000 00000000 00000000[  305.480474] NVRM: Xid (0001:00): 6, PE0000 0418 ff646464 00000000 00000000 00000000[  305.482900] NVRM: Xid (0001:00): 6, PE0000 0418 ff646464 00000000 00000000 00000000[  305.485175] NVRM: Xid (0001:00): 6, PE0000 0418 ff646464 00000000 00000000 00000000[67543.008822] tun: Disabled Privacy Extensions[67695.324868] tun: Disabled Privacy Extensions[67867.161601] tun: Disabled Privacy Extensions[164142.005479] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.[164142.005629] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode[164142.005767] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode[164146.828955] NVRM: Xid (0001:00): 6, PE0000 1164 ffc39166 00000008 00000000 ffd3aa81[164165.551722] ISO 9660 Extensions: Microsoft Joliet Level 3[164165.553590] ISO 9660 Extensions: RRIP_1991A[164184.537062] NVRM: Xid (0001:00): 6, PE0000 1ffc 00ffffff 0000fde8 00ffffff ffc7c7c7[164215.132703] NVRM: Xid (0001:00): 6, PE0000 1ffc 00ffffff 0000fa80 00ffffff 00ffffff[164216.657676] NVRM: Xid (0001:00): 13, 0000 01016100 0000008a 00000104 00000008 00000002[164220.041507] NVRM: Xid (0001:00): 6, PE0000 0be4 4ed2baa9 0000f980 00efebe7 00ffffff[164223.372135] NVRM: Xid (0001:00): 6, PE0000 1ffc 00ffffff 0000fa80 00ffffff 00ffffff[164236.509834] NVRM: Xid (0001:00): 6, PE0000 14b0 ffb5b4b2 00000008 00000000 ff2b2a28[164240.072309] NVRM: Xid (0001:00): 6, PE0000 0ea8 ffb1aeab 0000fd80 ffb1aeab ff9b9996[164303.238204] NVRM: Xid (0001:00): 6, PE0000 0000 ff7a6143 0000f618 60000000 00ffffff[164307.963614] NVRM: Xid (0001:00): 6, PE0000 1ffc 00ffffff 0000fd40 00ffffff 00ffffff[164321.044369] NVRM: Xid (0001:00): 6, PE0000 0644 ff816647 0000f880 ff816647 00ffffff[164321.857187] NVRM: Xid (0001:00): 6, PE0000 0644 ff7a6143 0000f880 ff816647 00ffffff[164385.873852] NVRM: Xid (0001:00): 6, PE0000 0460 ffe3a462 0000ee40 00000000 fff0ece8[164795.914019] NVRM: Xid (0001:00): 6, PE0000 0644 ff816647 0000f680 ff816647 00ffffff[164810.521528] NVRM: Xid (0001:00): 6, PE0000 0000 00000000 0000f618 60000000 00ffffff[164820.295615] NVRM: Xid (0001:00): 6, PE0000 0000 00f8f5f2 0000f618 60000000 00ffffff[177127.115024] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.[177127.115480] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode[177127.115656] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode[177156.079636] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff08 00000002[177156.303931] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff09 00000002[177156.938646] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff23 00000002[177157.089340] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff08 00000002[177157.555905] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff1d 00000002[177158.096510] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff22 00000002[177158.248295] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff08 00000002[177158.595620] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff13 00000002[177158.783943] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff0a 00000002[177158.846951] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff02 00000002[177158.924580] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff03 00000002[177159.002405] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff03 00000002[177159.157246] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff08 00000002[177159.206718] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff01 00000002[177159.414207] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff0a 00000002[177159.461114] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff01 00000002[177195.484796] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.[177195.485243] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode[177195.485552] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode[177222.391233] NVRM: Xid (0001:00): 6, PE0000 1ffc 00ffffff 0000fbb8 00ffffff ffc7c7c7[177227.168102] NVRM: Xid (0001:00): 6, PE0000 047c ffd2d2d2 0000d3c0 00000000 ffefefef[177227.351780] NVRM: Xid (0001:00): 6, PE0000 0000 00000003 0000fdd0 00000003 ffd4d4d4[177290.608744] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff00 00000002[177290.693393] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff48 00000002[177290.717185] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff06 00000002[177290.746513] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff0c 00000002[177290.771646] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff06 00000002[177290.790308] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff00 00000002[177290.810221] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff01 00000002[177290.848748] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff16 00000002[177290.869248] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff00 00000002[177290.898009] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff0b 00000002[177290.936596] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff16 00000002[177290.969130] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff0d 00000002[177290.987808] NVRM: Xid (0001:00): 13, 0002 beef5601 00001796 000003f4 ffffff00 00000002