rendered paste bodysuse:/etc/udev/rules.d # cat 70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:96:8b:94", NAME="eth0"
# PCI device 0x14e4:0x4311 (bcm43xx)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:00:1a:73:68", NAME="eth1"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:fc:b5:82", NAME="eth2"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:69:8a:36", NAME="eth3"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:95:4c:07", NAME="eth4"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:75:46:31", NAME="eth5"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:13:0e:91", NAME="eth6"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:db:7b:f5", NAME="eth7"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:29:af:9c", NAME="eth8"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:07:43:71", NAME="eth9"
# PCI device 0x10de:0x054c (forcedeth)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:dc:20:bd", NAME="eth10"
dmesg ----------------
suse:/etc/udev/rules.d # dmesg
Linux version 2.6.22.16-0.2-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/01 19:36:55 UTC
Command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120NZ1DT762RJWV-part3 vga=0x317 resume=/dev/sda1 splash=silent
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bf50000 (usable)
BIOS-e820: 000000003bf50000 - 000000003bf65000 (ACPI data)
BIOS-e820: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
BIOS-e820: 000000003bf66000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Entering add_active_range(0, 256, 245584) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F8250, 0024 (r2 PTLTD )
ACPI: XSDT 3BF5C61E, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
ACPI: FACP 3BF649FC, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
ACPI: DSDT 3BF5C68A, 82FE (r1 NVIDIA MCP67 6040000 MSFT 3000000)
ACPI: FACS 3BF65FC0, 0040
ACPI: TCPA 3BF64AF0, 0032 (r1 Phoeni x 6040000 TL 0)
ACPI: SRAT 3BF64B22, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
ACPI: SSDT 3BF64BC2, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: MCFG 3BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: HPET 3BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
ACPI: APIC 3BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 3BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SLIC 3BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-40000000
Entering add_active_range(0, 0, 158) 1 entries of 3200 used
Entering add_active_range(0, 256, 245584) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000003bf50000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 158
0: 256 -> 245584
On node 0 totalpages: 245486
DMA zone: 56 pages used for memmap
DMA zone: 1270 pages reserved
DMA zone: 2672 pages, LIFO batch:0
DMA32 zone: 3301 pages used for memmap
DMA32 zone: 238187 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 50296 bytes of per cpu data
Built 1 zonelists. Total pages: 240859
Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120NZ1DT762RJWV-part3 vga=0x317 resume=/dev/sda1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1700.159 MHz processor.
Console: colour dummy device 80x25
Checking aperture...
CPU 0: aperture @ 0 size 32 MB
No AGP bridge found
Memory: 958848k/982336k available (2053k kernel code, 23096k reserved, 1017k data, 316k init)
Calibrating delay using timer specific routine.. 3403.77 BogoMIPS (lpj=6807544)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4381k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 890 Objects with 89 Devices 278 Methods 34 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 12501182
Detected 12.501 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3400.44 BogoMIPS (lpj=6800898)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
Brought up 2 CPUs
migration_cost=131
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - e04fffff
PCI: No mmconfig possible on device 00:18
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 2 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:.................................................................................................................
Initialized 34/34 Regions 6/6 Fields 45/45 Buffers 28/43 Packages (907 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
.
Executed 1 _INI methods requiring 1 _STA executions (examined 96 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
ACPI: PCI Interrupt Link [Z015] (IRQs 18) *5
ACPI: PCI Interrupt Link [Z016] (IRQs 22) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:03: ioport range 0x1000-0x107f has been reserved
pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
pnp: 00:03: ioport range 0x1400-0x147f has been reserved
pnp: 00:03: ioport range 0x1480-0x14ff has been reserved
pnp: 00:03: ioport range 0x1800-0x187f has been reserved
pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
pnp: 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: f6100000-f61fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: 4000-4fff
MEM window: f2000000-f3ffffff
PREFETCH window: f0000000-f1ffffff
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: f6000000-f60fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
NET: Registered protocol family 2
Time: hpet clocksource has been installed.
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1202512498.476:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:12.0
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000b80000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78436 bytes
bootsplash: ...found (1024x768, 28133 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input2
NET: Registered protocol family 1
Freeing unused kernel memory: 316k freed
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (thermal-0318): AE_BAD_DATA, No critical threshold [20070126]
SCSI subsystem initialized
libata version 3.00 loaded.
pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000130c0 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000130c8 irq 15
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
ata1.00: configured for MWDMA2
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 cmd 0xffffc200001f8100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4349
ata4: SATA max UDMA/133 cmd 0xffffc200001f8180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4349
ata5: SATA max UDMA/133 cmd 0xffffc200001f8200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4349
ata6: SATA max UDMA/133 cmd 0xffffc200001f8280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4349
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
ata3.00: 234441648 sectors, multi 16: LBA48
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.16-0.2-default ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:ACPI: PCI Interrupt Link [Z016] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z016] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:04.1
ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
sda1 sda2 <<6>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.16-0.2-default ehci_hcd
usb usb2: SerialNumber: 0000:00:04.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sda5 > sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.16-0.2-default ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 7 ports detected
ACPI: PCI Interrupt Link [Z015] enabled at IRQ 18
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z015] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
usb 2-2: new high speed USB device using ehci_hcd and address 2
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.16-0.2-default ohci_hcd
usb usb4: SerialNumber: 0000:00:04.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-2: new device found, idVendor=04f2, idProduct=b015
usb 2-2: new device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-2: Product: HP Webcam
usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-2: SerialNumber: SN0001
usb 2-2: configuration #1 chosen from 1 choice
usb 3-4: new low speed USB device using ohci_hcd and address 2
swsusp: Marking nosave pages: 000000000009e000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 3-4: new device found, idVendor=046d, idProduct=c512
usb 3-4: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: USB Receiver
usb 3-4: Manufacturer: Logitech
usb 3-4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-4
input: Logitech USB Receiver as /class/input/input4
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
0000:00:0a.0: Invalid Mac address detected: 2b:66:65:24:1b:00
Please complain to your hardware vendor. Switching to a random MAC.
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b015)
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
bcm43xx driver
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:07 failed with error -16
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input8
ACPI: Power Button (CM) [PWRB]
ACPI: AC Adapter [ACAD] (on-line)
eth0: forcedeth.c: subsystem: 0103c:30cf bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.0 to 64
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
bcm43xx: Chip ID 0x4311, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x13, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xd, vendor 0x4243
bcm43xx: Unsupported 80211 core revision 13
bcm43xx: Core 2: ID 0x817, rev 0x4, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x5, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 9
bcm43xx: Invalid PHY Revision 9
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
ACPI: Battery Slot [BAT0] (battery present)
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:07.0 to 64
sdhci: SDHCI controller found at 0000:02:05.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7
mmc0: SDHCI at 0xf6100800 irq 7 DMA
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4]
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:12.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008
eth0 renamed to eth10
udev: renamed network interface eth0 to eth10
Adding 1445808k swap on /dev/sda1. Priority:-1 extents:1 across:1445808k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00ca103200]
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
AppArmor: AppArmor initialized
audit(1202512512.428:2): type=1505 info="AppArmor initialized" pid=2239
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 processors (version 2.00.00)
powernow-k8: 0 : fid 0x9 (1700 MHz), vid 0x13
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
audit(1202512534.464:3): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
audit(1202512534.484:4): audit_pid=3056 old=0 by auid=4294967295
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
bootsplash: status on console 0 changed to on
eth10: no IPv6 routers present
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0