//srv1> /c0 show all
/c0 Driver Version = 2.26.02.007
/c0 Model = 9500S-4LP
/c0 Memory Installed = 112MB
/c0 Firmware Version = FE9X 2.08.00.006
/c0 Bios Version = BE9X 2.03.01.052
/c0 Monitor Version = BL9X 2.02.00.001
/c0 Serial Number = L019005A6330791
/c0 PCB Version = Rev 019
/c0 PCHIP Version = 1.50
/c0 ACHIP Version = 3.20
/c0 Number of Ports = 4
/c0 Number of Units = 1
/c0 Number of Drives = 3
/c0 Total Optimal Units = 0
/c0 Not Optimal Units = 1
/c0 JBOD Export Policy = off
/c0 Disk Spinup Policy = 1
/c0 Spinup Stagger Time Policy (sec) = 2
/c0 Auto-Carving Policy = off
/c0 Auto-Carving Size = 2048 GB
/c0 Cache on Degrade Policy = Follow Unit Policy
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-5 REBUILD-PAUSED 0 - 64K 931.303 ON OFF
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 465.76 GB 976773168 WD-WCANU1169900
p1 OK u0 465.76 GB 976773168 WD-WCANU1042230
p2 NOT-PRESENT - - - -
p3 UNCONV-DCB u0 465.76 GB 976773168 WD-WCANU1403486
//srv1> /c0/u0 show all
/c0/u0 status = REBUILD-PAUSED
/c0/u0 is rebuilding with percent completion = 0%
/c0/u0 is not verifying, its current state is REBUILD-PAUSED
/c0/u0 is initialized.
/c0/u0 Cache State = on
/c0/u0 volume(s) = 1
/c0/u0 name =
/c0/u0 serial number = U116990022324F00B30E
/c0/u0 Ignore ECC policy = off
/c0/u0 Auto Verify Policy = off
Unit UnitType Status %RCmpl %V/I/M Port Stripe Size(GB)
------------------------------------------------------------------------
u0 RAID-5 REBUILD-PAUSED 0 - - 64K 931.303
u0-0 DISK OK - - p0 - 465.651
u0-1 DISK OK - - p1 - 465.651
u0-2 DISK DEGRADED - - p3 - 465.651