Linux version 2.6.24-home_1 (root@localhost) (gcc version 4.1.2) #1 Thu Feb 7 16:26:07 EET 2008
PCI: PCI BIOS revision 2.10 entry at 0xed9a0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
libata version 3.00 loaded.
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
scsi0 : scsi_debug, version 1.81 [20070104], dev_size_mb=8, opts=0x0
scsi 0:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 16384 512-byte hardware sectors (8 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 16384 512-byte hardware sectors (8 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:14.1: version 2.12
PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:14.1
ata_piix 0000:00:14.1: failed to request/iomap BARs for port 0 (errno=-16)
PCI: Unable to reserve I/O region #3:8@170 for device 0000:00:14.1
ata_piix 0000:00:14.1: failed to request/iomap BARs for port 1 (errno=-16)
ata_piix 0000:00:14.1: no available native port
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:14.2
uhci_hcd 0000:00:14.2: UHCI Host Controller
uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:14.2: irq 11, io base 0x00002020
PCI: Found IRQ 11 for device 0000:00:0f.0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:04:ac:53:d0:22, IRQ 11.
PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:14.1
pata_acpi 0000:00:14.1: failed to request/iomap BARs for port 0 (errno=-16)
PCI: Unable to reserve I/O region #3:8@170 for device 0000:00:14.1
pata_acpi 0000:00:14.1: failed to request/iomap BARs for port 1 (errno=-16)
pata_acpi 0000:00:14.1: no available native port
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0x44000000
PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:14.1
PIIX4: not 100% native mode: will probe irqs later
PIIX4: port 0x01f0 already claimed by ide0
PIIX4: port 0x0170 already claimed by ide1
PCI: Found IRQ 11 for device 0000:00:0d.0
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2