rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Thu Jan 31 23:33:13 UTC 2008 (Ubuntu 2.6.22-14.51-generic)
[ 0.000000] Command line: root=UUID=6c58121a-3702-4cb4-a50d-f9b1d1f27501 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fd53000 (usable)
[ 0.000000] BIOS-e820: 000000007fd53000 - 000000007fd5b000 (reserved)
[ 0.000000] BIOS-e820: 000000007fd5b000 - 000000007fde2000 (usable)
[ 0.000000] BIOS-e820: 000000007fde2000 - 000000007fde7000 (reserved)
[ 0.000000] BIOS-e820: 000000007fde7000 - 000000007fe71000 (usable)
[ 0.000000] BIOS-e820: 000000007fe71000 - 000000007fee9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee9000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007feff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feff000 - 000000007ff00000 (usable)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523603) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 523611, 523746) 2 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 523751, 523889) 3 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 524009, 524016) 4 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 524031, 524032) 5 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FE020 checksum 0
[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 GATEWA)
[ 0.000000] ACPI: RSDT 7FEFE038, 0044 (r1 GATEWA SYSTEM 26 1000013)
[ 0.000000] ACPI: FACP 7FEFD000, 0074 (r1 GATEWA SYSTEM 26 MSFT 1000013)
[ 0.000000] ACPI: DSDT 7FEF8000, 40B2 (r1 GATEWA SYSTEM 26 MSFT 1000013)
[ 0.000000] ACPI: FACS 7FEAA000, 0040
[ 0.000000] ACPI: APIC 7FEF7000, 0078 (r1 GATEWA SYSTEM 26 MSFT 1000013)
[ 0.000000] ACPI: WDDT 7FEF6000, 0040 (r1 GATEWA SYSTEM 26 MSFT 1000013)
[ 0.000000] ACPI: MCFG 7FEF5000, 003C (r1 GATEWA SYSTEM 26 MSFT 1000013)
[ 0.000000] ACPI: ASF! 7FEF4000, 00A6 (r32 GATEWA SYSTEM 26 MSFT 1000013)
[ 0.000000] ACPI: HPET 7FEF3000, 0038 (r1 GATEWA SYSTEM 26 MSFT 1000013)
[ 0.000000] ACPI: SLIC 7FEF2000, 0176 (r1 GATEWA SYSTEM 26 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7FEF1000, 01BC (r1 GATEWA CpuPm 26 MSFT 1000013)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff00000
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523603) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 523611, 523746) 2 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 523751, 523889) 3 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 524009, 524016) 4 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 524031, 524032) 5 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff00000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0 -> 143
[ 0.000000] 0: 256 -> 523603
[ 0.000000] 0: 523611 -> 523746
[ 0.000000] 0: 523751 -> 523889
[ 0.000000] 0: 524009 -> 524016
[ 0.000000] 0: 524031 -> 524032
[ 0.000000] On node 0 totalpages: 523771
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1131 pages reserved
[ 0.000000] DMA zone: 2796 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7108 pages used for memmap
[ 0.000000] DMA32 zone: 512680 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 000000007fd53000 - 000000007fd5b000
[ 0.000000] swsusp: Registered nosave memory region: 000000007fde2000 - 000000007fde7000
[ 0.000000] swsusp: Registered nosave memory region: 000000007fe71000 - 000000007fee9000
[ 0.000000] swsusp: Registered nosave memory region: 000000007fef0000 - 000000007feff000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ff80000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515476
[ 0.000000] Kernel command line: root=UUID=6c58121a-3702-4cb4-a50d-f9b1d1f27501 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 18.406289] time.c: Detected 1866.733 MHz processor.
[ 18.407380] Console: colour VGA+ 80x25
[ 18.407402] Checking aperture...
[ 18.407411] Calgary: detecting Calgary via BIOS EBDA area
[ 18.407415] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 18.430806] Memory: 2054448k/2096128k available (2274k kernel code, 40636k reserved, 1181k data, 296k init)
[ 18.430855] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
[ 18.508618] Calibrating delay using timer specific routine.. 3736.24 BogoMIPS (lpj=7472491)
[ 18.508650] Security Framework v1.0.0 initialized
[ 18.508657] SELinux: Disabled at boot.
[ 18.508864] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 18.510209] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 18.510848] Mount-cache hash table entries: 256
[ 18.510985] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.510988] CPU: L2 cache: 4096K
[ 18.510991] CPU 0/0 -> Node 0
[ 18.510993] using mwait in idle threads.
[ 18.510995] CPU: Physical Processor ID: 0
[ 18.510996] CPU: Processor Core ID: 0
[ 18.511003] CPU0: Thermal monitoring enabled (TM2)
[ 18.511015] SMP alternatives: switching to UP code
[ 18.511275] Early unpacking initramfs... done
[ 18.866367] ACPI: Core revision 20070126
[ 18.866406] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 18.909383] Using local APIC timer interrupts.
[ 18.962902] result 16667246
[ 18.962903] Detected 16.667 MHz APIC timer.
[ 18.964211] SMP alternatives: switching to SMP code
[ 18.964290] Booting processor 1/2 APIC 0x1
[ 18.974789] Initializing CPU#1
[ 19.052068] Calibrating delay using timer specific routine.. 3733.55 BogoMIPS (lpj=7467103)
[ 19.052075] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.052077] CPU: L2 cache: 4096K
[ 19.052080] CPU 1/1 -> Node 0
[ 19.052082] CPU: Physical Processor ID: 0
[ 19.052083] CPU: Processor Core ID: 1
[ 19.052089] CPU1: Thermal monitoring enabled (TM2)
[ 19.052608] Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
[ 19.052643] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 19.076060] Brought up 2 CPUs
[ 19.127486] migration_cost=30
[ 19.127656] NET: Registered protocol family 16
[ 19.127732] ACPI: bus type pci registered
[ 19.127738] PCI: Using configuration type 1
[ 19.128906] ACPI: EC: Look up EC in DSDT
[ 19.130411] ACPI: Interpreter enabled
[ 19.130413] ACPI: (supports S0 S1 S3 S4 S5)
[ 19.130430] ACPI: Using IOAPIC for interrupt routing
[ 19.134222] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.134242] PCI: Probing PCI hardware (bus 00)
[ 19.135566] PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling
[ 19.135633] PCI: Transparent bridge - 0000:00:1e.0
[ 19.135707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.135993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 19.136313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 19.136413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 19.136511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 19.136608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 19.136708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 19.139941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 19.140048] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 19.140130] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[ 19.140211] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 19.140293] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 19.140376] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 19.140458] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 19.140542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 19.140629] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.140640] pnp: PnP ACPI init
[ 19.140649] ACPI: bus type pnp registered
[ 19.142776] pnp: PnP ACPI: found 12 devices
[ 19.142779] ACPI: ACPI bus type pnp unregistered
[ 19.142826] PCI: Using ACPI for IRQ routing
[ 19.142828] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.142911] NET: Registered protocol family 8
[ 19.142913] NET: Registered protocol family 20
[ 19.142928] PCI-GART: No AMD northbridge found.
[ 19.142932] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 19.142936] hpet0: 3 64-bit timers, 14318180 Hz
[ 19.143977] Time: tsc clocksource has been installed.
[ 19.143986] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 19.143989] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 19.143992] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 19.143994] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 19.144001] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[ 19.144003] pnp: 00:06: ioport range 0x400-0x47f has been reserved
[ 19.144006] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[ 19.144298] PCI: Failed to allocate mem resource #6:20000@90000000 for 0000:01:00.0
[ 19.144334] PCI: Bridge: 0000:00:01.0
[ 19.144336] IO window: 2000-2fff
[ 19.144340] MEM window: 90000000-91ffffff
[ 19.144343] PREFETCH window: 80000000-8fffffff
[ 19.144346] PCI: Bridge: 0000:00:1c.0
[ 19.144347] IO window: disabled.
[ 19.144351] MEM window: disabled.
[ 19.144354] PREFETCH window: disabled.
[ 19.144358] PCI: Bridge: 0000:00:1c.2
[ 19.144360] IO window: disabled.
[ 19.144364] MEM window: disabled.
[ 19.144367] PREFETCH window: disabled.
[ 19.144371] PCI: Bridge: 0000:00:1c.3
[ 19.144372] IO window: disabled.
[ 19.144376] MEM window: 92100000-921fffff
[ 19.144380] PREFETCH window: disabled.
[ 19.144384] PCI: Bridge: 0000:00:1c.4
[ 19.144385] IO window: disabled.
[ 19.144389] MEM window: disabled.
[ 19.144392] PREFETCH window: disabled.
[ 19.144396] PCI: Bridge: 0000:00:1c.5
[ 19.144397] IO window: disabled.
[ 19.144401] MEM window: disabled.
[ 19.144404] PREFETCH window: disabled.
[ 19.144408] PCI: Bridge: 0000:00:1e.0
[ 19.144411] IO window: 1000-1fff
[ 19.144415] MEM window: 92000000-920fffff
[ 19.144418] PREFETCH window: disabled.
[ 19.144431] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.144435] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.144451] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 19.144455] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.144470] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 19.144475] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 19.144490] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 19.144494] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 19.144509] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 19.144513] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 19.144527] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 19.144532] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 19.144541] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 19.144550] NET: Registered protocol family 2
[ 19.180198] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.180865] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[ 19.183907] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 19.184649] TCP: Hash tables configured (established 262144 bind 65536)
[ 19.184652] TCP reno registered
[ 19.196333] checking if image is initramfs... it is
[ 19.899991] Freeing initrd memory: 7212k freed
[ 19.903332] audit: initializing netlink socket (disabled)
[ 19.903353] audit(1202392275.440:1): initialized
[ 19.905415] VFS: Disk quotas dquot_6.5.1
[ 19.905463] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 19.905548] io scheduler noop registered
[ 19.905549] io scheduler anticipatory registered
[ 19.905551] io scheduler deadline registered
[ 19.905639] io scheduler cfq registered (default)
[ 19.908243] Boot video device is 0000:01:00.0
[ 19.908363] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.908393] assign_interrupt_mode Found MSI capability
[ 19.908396] Allocate Port Service[0000:00:01.0:pcie00]
[ 19.908467] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.908502] assign_interrupt_mode Found MSI capability
[ 19.908505] Allocate Port Service[0000:00:1c.0:pcie00]
[ 19.908537] Allocate Port Service[0000:00:1c.0:pcie02]
[ 19.908609] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 19.908644] assign_interrupt_mode Found MSI capability
[ 19.908647] Allocate Port Service[0000:00:1c.2:pcie00]
[ 19.908675] Allocate Port Service[0000:00:1c.2:pcie02]
[ 19.908748] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 19.908783] assign_interrupt_mode Found MSI capability
[ 19.908785] Allocate Port Service[0000:00:1c.3:pcie00]
[ 19.908815] Allocate Port Service[0000:00:1c.3:pcie02]
[ 19.908887] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 19.908922] assign_interrupt_mode Found MSI capability
[ 19.908924] Allocate Port Service[0000:00:1c.4:pcie00]
[ 19.908954] Allocate Port Service[0000:00:1c.4:pcie02]
[ 19.909024] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 19.909059] assign_interrupt_mode Found MSI capability
[ 19.909061] Allocate Port Service[0000:00:1c.5:pcie00]
[ 19.909090] Allocate Port Service[0000:00:1c.5:pcie02]
[ 19.929535] Real Time Clock Driver v1.12ac
[ 19.929634] hpet_resources: 0xfed00000 is busy
[ 19.929655] Linux agpgart interface v0.102 (c) Dave Jones
[ 19.929657] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.929750] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.930259] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.930884] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.931003] input: Macintosh mouse button emulation as /class/input/input0
[ 19.931070] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 19.931072] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 19.933936] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.933941] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.934090] mice: PS/2 mouse device common for all mice
[ 19.934205] TCP cubic registered
[ 19.934262] NET: Registered protocol family 1
[ 19.934444] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 19.934451] Freeing unused kernel memory: 296k freed
[ 19.959454] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.084487] AppArmor: AppArmor initialized<5>audit(1202392276.620:2): type=1505 info="AppArmor initialized" pid=1235
[ 21.088966] fuse init (API version 7.8)
[ 21.092416] Failure registering capabilities with primary security module.
[ 21.127652] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.127662] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.523555] usbcore: registered new interface driver usbfs
[ 21.523578] usbcore: registered new interface driver hub
[ 21.523599] usbcore: registered new device driver usb
[ 21.524182] USB Universal Host Controller Interface driver v3.0
[ 21.524284] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 21.524296] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 21.524300] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 21.524433] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 21.524459] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 21.524555] usb usb1: configuration #1 chosen from 1 choice
[ 21.524581] hub 1-0:1.0: USB hub found
[ 21.524586] hub 1-0:1.0: 2 ports detected
[ 21.550081] SCSI subsystem initialized
[ 21.554022] libata version 2.21 loaded.
[ 21.583736] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 21.583739] e100: Copyright(c) 1999-2006 Intel Corporation
[ 21.627519] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 21.627531] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 21.627534] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 21.627671] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 21.627702] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 21.628026] usb usb2: configuration #1 chosen from 1 choice
[ 21.628173] hub 2-0:1.0: USB hub found
[ 21.628178] hub 2-0:1.0: 2 ports detected
[ 21.732448] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 21.732454] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 21.732458] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 21.732602] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 21.732626] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 21.732963] usb usb3: configuration #1 chosen from 1 choice
[ 21.733114] hub 3-0:1.0: USB hub found
[ 21.733120] hub 3-0:1.0: 2 ports detected
[ 21.837250] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 21.837256] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 21.837259] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 21.837416] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 21.837439] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
[ 21.837801] usb usb4: configuration #1 chosen from 1 choice
[ 21.837966] hub 4-0:1.0: USB hub found
[ 21.837971] hub 4-0:1.0: 2 ports detected
[ 21.944168] ata_piix 0000:00:1f.1: version 2.11
[ 21.944181] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 21.944205] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.944305] scsi0 : ata_piix
[ 21.944341] scsi1 : ata_piix
[ 21.944405] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000130b0 irq 14
[ 21.944408] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000130b8 irq 15
[ 21.973290] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 22.204244] usb 2-2: configuration #1 chosen from 1 choice
[ 22.216690] usbcore: registered new interface driver hiddev
[ 22.247394] input: Chicony USB Wireless HID Receiver as /class/input/input2
[ 22.247404] input: USB HID v1.11 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.1-2
[ 22.263992] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H652D, GA01, max UDMA/33
[ 22.315173] input: Chicony USB Wireless HID Receiver as /class/input/input3
[ 22.315211] input,hiddev96: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.1-2
[ 22.340232] input: Chicony USB Wireless HID Receiver as /class/input/input4
[ 22.340251] input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.1-2
[ 22.340260] usbcore: registered new interface driver usbhid
[ 22.340263] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 22.433000] ata1.00: configured for UDMA/33
[ 22.433025] ata2: port disabled. ignoring.
[ 22.433829] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H652D GA01 PQ: 0 ANSI: 5
[ 22.434021] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 22.484185] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[92017000-920177ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 22.484352] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 22.508878] e100: eth0: e100_probe: addr 0x92016000, irq 20, MAC addr 00:19:D1:3C:D4:AF
[ 22.508972] ahci 0000:00:1f.2: version 2.2
[ 22.508990] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 22.518328] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 22.518332] Uniform CD-ROM driver Revision: 3.20
[ 22.518384] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 22.521176] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 23.511825] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 23.511830] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 23.511835] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 23.512004] scsi2 : ahci
[ 23.512057] scsi3 : ahci
[ 23.512090] scsi4 : ahci
[ 23.512128] scsi5 : ahci
[ 23.512194] ata3: SATA max UDMA/133 cmd 0xffffc20000aa6100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 23.512198] ata4: SATA max UDMA/133 cmd 0xffffc20000aa6180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 23.512202] ata5: SATA max UDMA/133 cmd 0xffffc20000aa6200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 23.512205] ata6: SATA max UDMA/133 cmd 0xffffc20000aa6280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 23.753822] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001bf3cdc]
[ 23.995282] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 24.007224] ata3.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 24.007228] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 24.008024] ata3.00: configured for UDMA/133
[ 24.321980] ata4: SATA link down (SStatus 0 SControl 300)
[ 24.631850] ata5: SATA link down (SStatus 0 SControl 300)
[ 24.946160] ata6: SATA link down (SStatus 0 SControl 300)
[ 24.946246] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 24.946303] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 24.946454] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 24.947395] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 24.947401] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 24.947452] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 24.947484] ehci_hcd 0000:00:1d.7: debug port 1
[ 24.947490] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 24.947498] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x92204400
[ 24.951379] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 24.951477] usb usb5: configuration #1 chosen from 1 choice
[ 24.951507] hub 5-0:1.0: USB hub found
[ 24.951514] hub 5-0:1.0: 8 ports detected
[ 24.953961] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 24.953972] sd 2:0:0:0: [sda] Write Protect is off
[ 24.953974] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.953987] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.954029] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 24.954037] sd 2:0:0:0: [sda] Write Protect is off
[ 24.954039] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.954052] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.954055] sda: sda1 sda2 < sda5 >
[ 24.983000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 25.119512] usb 2-2: USB disconnect, address 2
[ 25.152689] Attempting manual resume
[ 25.152692] swsusp: Resume From Partition 8:5
[ 25.152694] PM: Checking swsusp image.
[ 25.152838] PM: Resume from disk failed.
[ 25.196748] kjournald starting. Commit interval 5 seconds
[ 25.196754] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.676290] usb 5-8: new high speed USB device using ehci_hcd and address 3
[ 25.811265] usb 5-8: configuration #1 chosen from 1 choice
[ 26.051546] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 26.286271] usb 2-2: configuration #1 chosen from 1 choice
[ 26.320424] input: Chicony USB Wireless HID Receiver as /class/input/input5
[ 26.320433] input: USB HID v1.11 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.1-2
[ 26.386213] input: Chicony USB Wireless HID Receiver as /class/input/input6
[ 26.386257] input,hiddev96: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.1-2
[ 26.411268] input: Chicony USB Wireless HID Receiver as /class/input/input7
[ 26.411287] input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.1-2
[ 31.534119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.543448] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.977726] ieee80211_crypt: registered algorithm 'NULL'
[ 31.980123] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 31.980126] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 32.047657] nvidia: module license 'NVIDIA' taints kernel.
[ 32.301036] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.301047] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 32.301433] input: PC Speaker as /class/input/input8
[ 32.301794] usbcore: registered new interface driver xpad
[ 32.301797] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 32.301951] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007
[ 32.307479] usbcore: registered new interface driver libusual
[ 32.309836] parport_pc 00:07: reported by Plug and Play ACPI
[ 32.309891] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 32.326129] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 32.326133] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 32.346337] bcm43xx driver
[ 32.346411] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 32.400014] Initializing USB Mass Storage driver...
[ 32.400476] scsi6 : SCSI emulation for USB Mass Storage devices
[ 32.400538] usbcore: registered new interface driver usb-storage
[ 32.400541] USB Mass Storage support registered.
[ 32.400616] usb-storage: device found at 3
[ 32.400618] usb-storage: waiting for device to settle before scanning
[ 32.481984] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 32.482956] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 32.518182] hda-intel: no codecs found!
[ 32.519166] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 33.027509] lp0: using parport0 (interrupt-driven).
[ 33.082840] Adding 6032368k swap on /dev/sda5. Priority:-1 extents:1 across:6032368k
[ 33.509719] EXT3 FS on sda1, internal journal
[ 35.582832] No dock devices found.
[ 35.688573] input: Power Button (FF) as /class/input/input9
[ 35.688728] ACPI: Power Button (FF) [PWRF]
[ 35.693728] input: Sleep Button (CM) as /class/input/input10
[ 35.693899] ACPI: Sleep Button (CM) [SLPB]
[ 36.826787] ppdev: user-space parallel port driver
[ 36.995281] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 37.093831] audit(1202392293.127:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5080 profile="/usr/sbin/cupsd"
[ 37.132962] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 37.290750] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 37.397547] usb-storage: device scan complete
[ 37.398154] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 37.398654] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 37.399153] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 37.399653] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 37.400929] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 37.400966] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 37.401934] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 37.401964] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 37.402977] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 37.403006] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 37.403983] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 37.404014] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 37.439771] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 37.592655] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 37.609745] NFSD: starting 90-second grace period
[ 38.547236] Failure registering capabilities with primary security module.
[ 40.705370] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 42.936292] NET: Registered protocol family 17
[ 47.225319] NET: Registered protocol family 10
[ 47.225400] lo: Disabled Privacy Extensions
[ 58.056411] eth0: no IPv6 routers present
[ 64.314661] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 87.946945] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 111.591899] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 135.384113] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 159.115950] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 282.742114] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.