clueless

Linux version 2.6.24 (2.6.24-2) (root@debian) (gcc version 4.2.3 (Debian 4.2.3-1)) #1 PREEMPT Tue Feb 5 02:44:22 CET 2008BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)639MB HIGHMEM available.896MB LOWMEM available.Entering add_active_range(0, 0, 393200) 0 entries of 256 usedZone PFN ranges:  DMA             0 ->     4096  Normal       4096 ->   229376  HighMem    229376 ->   393200Movable zone start PFN for each nodeearly_node_map[1] active PFN ranges    0:        0 ->   393200On node 0 totalpages: 393200  DMA zone: 32 pages used for memmap  DMA zone: 0 pages reserved  DMA zone: 4064 pages, LIFO batch:0  Normal zone: 1760 pages used for memmap  Normal zone: 223520 pages, LIFO batch:31  HighMem zone: 1279 pages used for memmap  HighMem zone: 162545 pages, LIFO batch:31  Movable zone: 0 pages used for memmapDMI 2.2 present.Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390129Kernel command line: root=/dev/hdb1 ro acpi=off noapic nolapic selinux=0 vga=0x318 video=vesafb:mtrr:3,ywrap,vram:256Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table entries: 4096 (order: 12, 16384 bytes)Detected 1837.557 MHz processor.Console: colour dummy device 80x25console [tty0] enabledDentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 1554904k/1572800k available (2442k kernel code, 16720k reserved, 798k data, 184k init, 655296k highmem)virtual kernel memory layout:    fixmap  : 0xfffee000 - 0xfffff000   (  68 kB)    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)      .init : 0xc042e000 - 0xc045c000   ( 184 kB)      .data : 0xc0362b9a - 0xc042a744   ( 798 kB)      .text : 0xc0100000 - 0xc0362b9a   (2442 kB)Checking if this processor honours the WP bit even in supervisor mode... Ok.SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1Calibrating delay using timer specific routine.. 3676.44 BogoMIPS (lpj=1838223)Security Framework initializedCapability LSM initializedMount-cache hash table entries: 512CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 512K (64 bytes/line)CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000Compat vDSO mapped to ffffe000.CPU: AMD Athlon(tm) XP 2500+ stepping 00Checking 'hlt' instruction... OK.Freeing SMP alternatives: 0k freednet_namespace: 64 bytesNET: Registered protocol family 16PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2PCI: Using configuration type 1Setting up standard PCI resourcesSCSI subsystem initializedlibata version 3.00 loaded.usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbPCI: Probing PCI hardwarePCI: Probing PCI hardware (bus 00)PCI: nForce2 C1 Halt Disconnect fixupPCI: Discovered primary peer bus ff [IRQ]PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0PCI: Bridge: 0000:00:08.0  IO window: d000-dfff  MEM window: e7000000-e7ffffff  PREFETCH window: disabled.PCI: Bridge: 0000:00:1e.0  IO window: disabled.  MEM window: e4000000-e6ffffff  PREFETCH window: d0000000-dfffffffPCI: Setting latency timer of device 0000:00:08.0 to 64NET: Registered protocol family 2Time: tsc clocksource has been installed.IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 6, 262144 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredhighmem bounce pool size: 64 pagesNTFS driver 2.1.29 [Flags: R/O].fuse init (API version 7.9)io scheduler noop registeredio scheduler cfq registered (default)Boot video device is 0000:02:00.0vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 262144kvesafb: mode is 1024x768x32, linelength=4096, pages=1vesafb: protected mode interface info at c000:c2a0vesafb: pmi: set display start = c00cc2d6, set palette = c00cc340vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0Console: switching to colour frame buffer device 128x48fb0: VESA VGA frame buffer deviceReal Time Clock Driver v1.12acLinux agpgart interface v0.102agpgart: Detected NVIDIA nForce2 chipsetagpgart: AGP aperture is 64M @ 0xe0000000Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).Hangcheck: Using get_cycles().RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksizeloop: module loadedusbcore: registered new interface driver ubforcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.PCI: Setting latency timer of device 0000:00:04.0 to 64forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:0e:a6:66:de:e2forcedeth 0000:00:04.0: timirq lnktim desc-v1Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxNFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at  PCI slot 0000:00:09.0NFORCE2: not 100% native mode: will probe irqs laterNFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMAProbing IDE interface ide0...hdb: Maxtor 6Y120L0, ATA DISK drivehda: MAXTOR STM3160212A, ATA DISK drivehda: host max PIO5 wanted PIO255(auto-tune) selected PIO4hda: UDMA/100 mode selectedhdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4hdb: UDMA/133 mode selectedide0 at 0x1f0-0x1f7,0x3f6 on irq 14Probing IDE interface ide1...hdc: _NEC DVD_RW ND-4570A, ATAPI CD/DVD-ROM drivehdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4hdc: UDMA/33 mode selectedide1 at 0x170-0x177,0x376 on irq 15hda: max request size: 512KiBhda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63hda: cache flushes supported hda: hda1 hda2 < hda5 >hdb: max request size: 128KiBhdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63hdb: cache flushes supported hdb: hdb1 hdb2 < hdb5 hdb6 > hdb3hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB CacheUniform CD-ROM driver Revision: 3.20Driver 'sd' needs updating - please use bus_type methodsusbmon: debugfs is not availablePCI: Setting latency timer of device 0000:00:02.2 to 64ehci_hcd 0000:00:02.2: EHCI Host Controllerehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:02.2: debug port 1PCI: cache line size of 64 is not supported by device 0000:00:02.2ehci_hcd 0000:00:02.2: irq 3, io mem 0xe8003000ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 6 ports detectedohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverPCI: Setting latency timer of device 0000:00:02.0 to 64ohci_hcd 0000:00:02.0: OHCI Host Controllerohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:02.0: irq 11, io mem 0xe8001000usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 3 ports detectedPCI: Setting latency timer of device 0000:00:02.1 to 64ohci_hcd 0000:00:02.1: OHCI Host Controllerohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3ohci_hcd 0000:00:02.1: irq 4, io mem 0xe8002000usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 3 ports detectedClocksource tsc unstable (delta = 176845119 ns)Time: pit clocksource has been installed.Initializing USB Mass Storage driver...usbcore: registered new interface driver usb-storageUSB Mass Storage support registered.serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all miceinput: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comusbcore: registered new interface driver usbhiddrivers/hid/usbhid/hid-core.c: v2.6:USB HID core drivernf_conntrack version 0.5.0 (16384 buckets, 65536 max)ip_tables: (C) 2000-2006 Netfilter Core TeamTCP cubic registeredNET: Registered protocol family 1NET: Registered protocol family 17Using IPI Shortcut modelogips2pp: Detected unknown logitech mouse model 90input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1kjournald starting.  Commit interval 5 secondsEXT3-fs: mounted filesystem with journal data mode.VFS: Mounted root (ext3 filesystem) readonly.Freeing unused kernel memory: 184k freedLinux video capture interface: v2.00i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500saa7130/34: v4l2 driver version 0.2.14 loadedsaa7133[0]: found at 0000:01:0a.0, rev: 240, irq: 7, latency: 32, mmio: 0xe7000000saa7133[0]: subsystem: 1043:4845, board: ASUS TV-FM 7135 [card=53,autodetected]saa7133[0]: board init: gpio is 0saa7133[0]: i2c eeprom 00: 43 10 45 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92saa7133[0]: i2c eeprom 10: 00 ff e2 0f ff 20 ff ff ff ff ff ff ff ff ff ffsaa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 04 08 ff 00 89 ff ff ff ffsaa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffsaa7133[0]: i2c eeprom 40: ff 14 00 c2 96 ff 01 30 ff ff ff ff ff ff ff ffsaa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffsaa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffsaa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff fftuner 2-004b: chip found @ 0x96 (saa7133[0])tda8290 2-004b: setting tuner address to 61tuner 2-004b: type set to tda8290+75tda8290 2-004b: setting tuner address to 61tuner 2-004b: type set to tda8290+75saa7133[0]: registered device video0 [v4l2]saa7133[0]: registered device vbi0saa7133[0]: registered device radio0snd-ca0106: Model 1006 Rev 00000000 Serial 10061102Adding 465812k swap on /dev/hdb6.  Priority:-1 extents:1 across:465812kEXT3 FS on hdb1, internal journalNTFS volume version 3.1.NTFS volume version 3.1.NTFS volume version 3.1.