Public feed #893175

Miscellany

public text v1 · immutable
Raw Edit
·published 2008-02-05 22:50 UTC
rendered paste body
skynet# dmesg -a
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE #0: Wed Jan 16 04:18:52 UTC 2008
    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <KM400  AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm)   3000+ (1999.79-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow!+,3DNow!>
real memory  = 469696512 (447 MB)
avail memory = 450154496 (429 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 04:16:19)
acpi0: <KM400 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8235/8237 (Apollo KM400/KM400A) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x9000-0x901f mem 0xeb100000-0xeb100fff,0xeb000000-0xeb0fffff irq 16 at device 8.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:b4:d7:70
fwohci0: <VIA Fire II (VT6306)> port 0x9400-0x947f mem 0xeb101000-0xeb1017ff irq 19 at device 11.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:b8:ac:b1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:b8:ac:b1
fwe0: Ethernet address: 02:e0:18:b8:ac:b1
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <VIA 6420 SATA150 controller> port 0x9800-0x9807,0x9c00-0x9c03,0xa000-0xa007,0xa400-0xa403,0xa800-0xa80f,0xac00-0xacff irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb000-0xb00f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xbc00-0xbc1f at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc000-0xc01f at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xeb102000-0xeb1020ff at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: Western Digital My Book, rev 2.00/1.65, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xcc00-0xccff mem 0xeb103000-0xeb1030ff irq 23 at device 18.0 on pci0
vr0: Quirks: 0x0
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:2f:f7:6a:91
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _PSV value is absurd, ignored (-247.7C)
acpi_tz0: _ACx value is absurd, ignored (-265.7C)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass1: vendor 0x058f USB Reader, rev 1.10/1.00, addr 2
Timecounter "TSC" frequency 1999788915 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acpi_tz0: _PSV value is absurd, ignored (-247.7C)
acpi_tz0: _ACx value is absurd, ignored (-265.7C)
acpi_tz0: _PSV value is absurd, ignored (-247.7C)
acpi_tz0: _ACx value is absurd, ignored (-265.7C)
ad0: 114473MB <WDC WD1200BB-22GUA0 08.02D08> at ata0-master UDMA100
acd0: CDRW <TSST CDW/DVD TS-H492A/HP02> at ata1-master UDMA33
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WD 3200AAJ External 1.65> Fixed Direct Access SCSI-4 device 
da0: 40.000MB/s transfers
da0: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C)
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim1 bus 1 target 0 lun 1
da2: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim1 bus 1 target 0 lun 2
da3: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da4 at umass-sim1 bus 1 target 0 lun 3
da4: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da4: 1.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 170541 free (1405 frags, 21142 blocks, 0.6% fragmentation)
/dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 253808 free (40 frags, 31721 blocks, 0.0% fragmentation)
/dev/ad0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f: clean, 52809483 free (57243 frags, 6594030 blocks, 0.1% fragmentation)
/dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 700278 free (454 frags, 87478 blocks, 0.1% fragmentation)
Mounting local file systems:
.
Setting hostname: skynet.cology.com.
net.inet6.ip6.auto_linklocal: 
1
 -> 
0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 
	inet6 ::1 prefixlen 128 
	inet 127.0.0.1 netmask 0xff000000 
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	options=8<VLAN_MTU>
	inet 192.168.0.64 netmask 0xfffffe00 broadcast 192.168.1.255
	ether 00:11:2f:f7:6a:91
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
add net default: gateway 192.168.0.1
Additional routing options:
.
Starting devd.
hw.acpi.cpu.cx_lowest: 
C1
 -> 
C1

Additional TCP options:
.
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/mysql
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files:
.
Starting syslogd.
Initial i386 initialization:
.
Additional ABI support:
.
Clearing /tmp (X related).
Starting local daemons:
/usr/local/sbin/apachectl start: httpd started
WARNING: /backupdrive was not properly dismounted
.
Updating motd
.
Mounting late file systems:
.
Starting usbd.
Starting Webmin server in /usr/local/share/webmin-1.390
Starting mysql.
Configuring syscons:
 blanktime
.
Starting sshd.
Starting cron.
Local package initialization:
.
Starting background file system checks in 60 seconds.

Tue Feb  5 22:39:57 MST 2008
Feb  5 22:40:02 skynet login: ROOT LOGIN (root) ON ttyv0
Feb  5 22:50:03 skynet su: peter to root on /dev/ttyp0
skynet#