Public feed #892933

Someone

public text v1 · immutable
Raw Edit
·published 2008-02-05 19:51 UTC
rendered paste body
Linux version 2.6.22.9-91.0.120asp (build@bobik.asplinux.com.ua) (gcc version 4.1.2 20070925 (ASPLinux 4.1.2-27)) #1 SMP Tue Oct 2 00:17:42 EEST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
 BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4c20
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 524272) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   524272
early_node_map[1] active PFN ranges
    0:        0 ->   524272
On node 0 totalpages: 524272
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2303 pages used for memmap
  HighMem zone: 292593 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F6570, 0014 (r0 GBT   )
ACPI: RSDT 7FFF3040, 0038 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
ACPI: FACP 7FFF30C0, 0074 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
ACPI: DSDT 7FFF3180, 38CC (r1 GBT    AWRDACPI     1000 MSFT  100000C)
ACPI: FACS 7FFF0000, 0040
ACPI: MCFG 7FFF6B80, 003C (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
ACPI: APIC 7FFF6AC0, 0068 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
ACPI: SSDT 7FFF6C00, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
ACPI: SSDT 7FFF7090, 0167 (r1  PmRef    CpuPm     3000 INTL 20040311)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
Built 1 zonelists.  Total pages: 520177
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0791000 soft=c0771000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2992.809 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2070596k/2097088k available (2109k kernel code, 25176k reserved, 1112k data, 260k init, 1179584k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc072b000 - 0xc076c000   ( 260 kB)
      .data : 0xc060f428 - 0xc0725504   (1112 kB)
      .text : 0xc0400000 - 0xc060f428   (2109 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 5988.60 BogoMIPS (lpj=2994304)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000649d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 0a
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0792000 soft=c0772000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5984.21 BogoMIPS (lpj=2992109)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000649d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 0a
Total of 2 processors activated (11972.82 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1536 bytes
Time: 17:32:45  Date: 02/05/08
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
PCI: PCI BIOS revision 3.00 entry at 0xfa9e0, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved
pnp: 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:0d: iomem range 0xd0000-0xd7fff has been reserved
pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: e0000000-e2ffffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1e.0
  IO window: a000-afff
  MEM window: e3000000-e4ffffff
  PREFETCH window: 88000000-880fffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3545k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1202232765.534:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key F210995BE017D78C
- User ID: ASPLinux, Ltd. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: SSDT 7FFF7000, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
ACPI: Processor [CPU1] (supports 2 throttling states)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
  Magic number: 12:629:541
Freeing unused kernel memory: 260k freed
Write protecting the kernel read-only data: 858k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000bc00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000b400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xe5004000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
ata1.00: ATAPI: PIONEER DVD-RW  DVR-111D, 1.23, max UDMA/66
usb 3-2: new full speed USB device using uhci_hcd and address 3
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-111D 1.23 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001d402 bmdma 0x0001e000 irq 18
ata4: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001dc02 bmdma 0x0001e008 irq 18
usb 3-2: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2
input: Logitech USB Receiver as /class/input/input3
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2
ata3.00: Host Protected Area detected:
	current size: 390719855 sectors
	native size: 390721968 sectors
ata3.00: ATA-7: SAMSUNG SP2004C, VM100-33, max UDMA7
ata3.00: 390719855 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: Host Protected Area detected:
	current size: 390719855 sectors
	native size: 390721968 sectors
ata3.00: configured for UDMA/133
ata4.00: ATA-6: ST380817AS, 3.42, max UDMA/133
ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.01: Host Protected Area detected:
	current size: 234439535 sectors
	native size: 234441648 sectors
ata4.01: ATA-7: ST3120813AS, 2AAA, max UDMA/133
ata4.01: 234439535 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
ata4.01: Host Protected Area detected:
	current size: 234439535 sectors
	native size: 234441648 sectors
ata4.01: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2004C  VM10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 390719855 512-byte hardware sectors (200049 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 390719855 512-byte hardware sectors (200049 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
scsi 3:0:1:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
sd 3:0:1:0: [sdc] 234439535 512-byte hardware sectors (120033 MB)
sd 3:0:1:0: [sdc] Write Protect is off
sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:1:0: [sdc] 234439535 512-byte hardware sectors (120033 MB)
sd 3:0:1:0: [sdc] Write Protect is off
sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 3:0:1:0: [sdc] Attached SCSI disk
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1202232771.921:2): selinux=0 auid=4294967295
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:1:0: Attached scsi generic sg3 type 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
Floppy drive(s): fd0 is 1.44M
intel_rng: FWH not detected
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20
skge 1.11 addr 0xe4000000 irq 20 chip Yukon-Lite rev 9
skge eth0: addr 00:0f:ea:64:3c:08
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
iTCO_vendor_support: vendor-support=0
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19
eth1: RealTek RTL8139 at 0xf8926000, 00:90:fe:22:f2:a3, IRQ 19
eth1:  Identified 8139 chip type 'RTL-8139C'
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
No dock devices found.
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 100 Mbps, full duplex, flow control none
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
eth0: no IPv6 routers present
eth1: no IPv6 routers present
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth1: no IPv6 routers present
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth1: no IPv6 routers present
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
Removing netfilter NETLINK layer.
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth1: no IPv6 routers present
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth1: no IPv6 routers present
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
ip_tables: (C) 2000-2006 Netfilter Core Team
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
ip6_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 11 0000 0000 media 10.
eth1: Tx queue start entry 4  dirty entry 0.
eth1:  Tx descriptor 0 is 00002000. (queue head)
eth1:  Tx descriptor 1 is 00002000.
eth1:  Tx descriptor 2 is 00002000.
eth1:  Tx descriptor 3 is 00002000.
eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1