Public feed
#892293
[ 8.003509] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 8.004231] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 8.004237] PCI: setting IRQ 10 as level-triggered
[ 8.004244] ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 8.004257] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 8.004274] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 8.004319] NET: Registered protocol family 2
[ 8.093496] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 8.093574] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 8.093821] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 8.093962] TCP: Hash tables configured (established 16384 bind 16384)
[ 8.093968] TCP reno registered
[ 8.123694] checking if image is initramfs... it is
[ 8.175223] Freeing initrd memory: 247k freed
[ 8.175982] Registering unionfs 2.0
[ 8.176055] io scheduler noop registered
[ 8.176060] io scheduler deadline registered (default)
[ 8.176439] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 8.176496] assign_interrupt_mode Found MSI capability
[ 8.176503] Allocate Port Service[0000:00:1c.0:pcie00]
[ 8.176577] Allocate Port Service[0000:00:1c.0:pcie02]
[ 8.176689] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 8.176744] assign_interrupt_mode Found MSI capability
[ 8.176751] Allocate Port Service[0000:00:1c.1:pcie00]
[ 8.176808] Allocate Port Service[0000:00:1c.1:pcie02]
[ 8.176919] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 8.176973] assign_interrupt_mode Found MSI capability
[ 8.176980] Allocate Port Service[0000:00:1c.2:pcie00]
[ 8.177037] Allocate Port Service[0000:00:1c.2:pcie02]
[ 8.177335] vesafb: framebuffer at 0xd0000000, mapped to 0xe0080000, using 1200k, total 7872k
[ 8.177344] vesafb: mode is 640x480x16, linelength=1280, pages=12
[ 8.177351] vesafb: protected mode interface info at 00ff:44f0
[ 8.177356] vesafb: scrolling: redraw
[ 8.177364] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 8.191583] Console: switching to colour frame buffer device 80x30
[ 8.205499] fb0: VESA VGA frame buffer device
[ 8.322839] Linux agpgart interface v0.102 (c) Dave Jones
[ 8.322926] agpgart: Detected an Intel 915GM Chipset.
[ 8.323240] agpgart: Detected 7932K stolen memory.
[ 8.351409] agpgart: AGP aperture is 256M @ 0xd0000000
[ 8.351475] [drm] Initialized drm 1.1.0 20060810
[ 8.351513] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 8.351645] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 8.352561] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 8.353034] loop: loaded (max 8 devices)
[ 8.353342] tun: Universal TUN/TAP device driver, 1.6
[ 8.353348] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 8.353653] ata_piix 0000:00:1f.2: version 2.10ac1
[ 8.353665] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 8.354540] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
[ 8.354547] PCI: setting IRQ 7 as level-triggered
[ 8.354555] ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[ 8.354589] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.354682] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 8.354726] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 8.354753] scsi0 : ata_piix
[ 8.524376] ATA: abnormal status 0x7F on port 0x000101f7
[ 8.524416] scsi1 : ata_piix
[ 8.703662] ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
[ 8.703670] ata2.00: 7815024 sectors, multi 0: LBA
[ 8.723657] ata2.00: configured for UDMA/33
[ 8.723847] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
[ 8.724016] SCSI device sda: 7815024 512-byte hdwr sectors (4001 MB)
[ 8.724038] sda: Write Protect is off
[ 8.724043] sda: Mode Sense: 00 3a 00 00
[ 8.724070] SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 8.724158] SCSI device sda: 7815024 512-byte hdwr sectors (4001 MB)
[ 8.724174] sda: Write Protect is off
[ 8.724179] sda: Mode Sense: 00 3a 00 00
[ 8.724204] SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 8.724212] sda: sda1 sda2 sda3 sda4
[ 8.724915] sd 1:0:0:0: Attached scsi disk sda
[ 8.725158] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.741063] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.741074] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.741327] mice: PS/2 mouse device common for all mice
[ 8.767317] input: AT Translated Set 2 keyboard as /class/input/input0
[ 8.779351] TCP cubic registered
[ 8.779384] NET: Registered protocol family 1
[ 8.779394] NET: Registered protocol family 17
[ 8.779406] Using IPI Shortcut mode
[ 8.779736] Freeing unused kernel memory: 164k freed
[ 8.851384] kjournald starting. Commit interval 5 seconds
[ 8.852461] EXT3 FS on sda2, internal journal
[ 8.852471] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.296655] Generic RTC Driver v1.07
[ 10.332711] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04753/0x200000
[ 10.425364] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[ 13.515323] ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 13.515360] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.092702] jack present = 0 0
[ 14.382179] ACPI: AC Adapter [AC0] (on-line)
[ 14.722947] ACPI: Battery Slot [BAT0] (battery present)
[ 14.737360] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 14.737377] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 14.749195] input: Power Button (FF) as /class/input/input2
[ 14.749249] ACPI: Power Button (FF) [PWRF]
[ 14.749473] input: Lid Switch as /class/input/input3
[ 14.749500] ACPI: Lid Switch [LID]
[ 14.749588] input: Sleep Button (CM) as /class/input/input4
[ 14.749633] ACPI: Sleep Button (CM) [SLPB]
[ 14.749719] input: Power Button (CM) as /class/input/input5
[ 14.749767] ACPI: Power Button (CM) [PWRB]
[ 14.765144] eeepc_hotk: module license 'unspecified' taints kernel.
[ 14.765803] Asus EEEPC HOTKEY
[ 14.766139] [eeepc hotk] Hotkey init flags 0x41.
[ 14.767773] [eeepc hotk] Get control methods supported : 0x101711
[ 14.889314] fuse init (API version 7.8)
[ 15.042820] usbcore: registered new interface driver usbfs
[ 15.042867] usbcore: registered new interface driver hub
[ 15.042912] usbcore: registered new device driver usb
[ 15.048647] usbcore: registered new interface driver usbhid
[ 15.048658] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 15.220965] USB Universal Host Controller Interface driver v3.0
[ 15.221938] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
[ 15.221947] PCI: setting IRQ 3 as level-triggered
[ 15.221955] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 15.221978] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 15.221986] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 15.222657] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 15.222706] uhci_hcd 0000:00:1d.0: irq 3, io base 0x0000e400
[ 15.222963] usb usb1: configuration #1 chosen from 1 choice
[ 15.223024] hub 1-0:1.0: USB hub found
[ 15.223038] hub 1-0:1.0: 2 ports detected
[ 15.332893] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[ 15.332920] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 15.332929] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 15.332977] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 15.333020] uhci_hcd 0000:00:1d.1: irq 7, io base 0x0000e480
[ 15.333211] usb usb2: configuration #1 chosen from 1 choice
[ 15.333275] hub 2-0:1.0: USB hub found
[ 15.333290] hub 2-0:1.0: 2 ports detected
[ 15.442802] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 15.442829] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 15.442837] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 15.442885] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 15.442927] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e800
[ 15.443160] usb usb3: configuration #1 chosen from 1 choice
[ 15.443215] hub 3-0:1.0: USB hub found
[ 15.443228] hub 3-0:1.0: 2 ports detected
[ 15.552800] ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 15.552827] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 15.552836] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 15.552884] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 15.552923] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000e880
[ 15.553128] usb usb4: configuration #1 chosen from 1 choice
[ 15.553180] hub 4-0:1.0: USB hub found
[ 15.553197] hub 4-0:1.0: 2 ports detected
[ 15.612523] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 15.674668] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 15.674698] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 15.674707] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 15.674767] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 15.674825] ehci_hcd 0000:00:1d.7: debug port 1
[ 15.674836] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 15.674853] ehci_hcd 0000:00:1d.7: irq 3, io mem 0xf7eb7c00
[ 15.678731] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.678919] usb usb5: configuration #1 chosen from 1 choice
[ 15.678973] hub 5-0:1.0: USB hub found
[ 15.678989] hub 5-0:1.0: 8 ports detected
[ 15.818670] Atheros(R) L2 Ethernet Network Driver - version 1.0.40.4
[ 15.818681] Copyright (c) 2007 Atheros Corporation.
[ 15.818772] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 15.818795] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 16.106190] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.152516] usb 1-2: device not accepting address 2, error -71
[ 16.284897] pciehp: HPC vendor_id 8086 device_id 2660 ss_vid 0 ss_did 0
[ 16.284957] Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
[ 16.284983] pciehp: HPC vendor_id 8086 device_id 2662 ss_vid 0 ss_did 0
[ 16.285036] Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
[ 16.285060] pciehp: HPC vendor_id 8086 device_id 2664 ss_vid 0 ss_did 0
[ 16.285104] Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
[ 16.285113] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 16.300730] ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
[ 16.304434] ath_dfs: Version 2.0.0
[ 16.304439] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[ 16.462542] wlan: 0.8.4.2 (Atheros/multi-bss)
[ 16.465038] ath_rate_atheros: no version for "ath_hal_getuptime" found: kernel tainted.
[ 16.465966] ath_rate_atheros: Version 2.0.1
[ 16.465969] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
[ 16.477478] ath_pci: 0.9.4.5 (Atheros/multi-bss)
[ 16.477584] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 16.477605] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 17.120476] usb 5-2: new high speed USB device using ehci_hcd and address 2
[ 17.121537] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 17.121550] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 17.121572] wifi0: mac 14.2 phy 7.0 radio 10.2
[ 17.121583] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 17.121589] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 17.121594] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 17.121600] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 17.121605] wifi0: Use hw queue 8 for CAB traffic
[ 17.121610] wifi0: Use hw queue 9 for beacons
[ 17.121618] wifi0: Atheros 5212: mem=0xfbef0000, irq=10
[ 17.264594] usb 5-2: configuration #1 chosen from 1 choice
[ 17.542288] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 17.693680] usb 5-5: configuration #1 chosen from 1 choice
[ 17.697413] usbcore: registered new interface driver libusual
[ 17.710491] Initializing USB Mass Storage driver...
[ 17.710633] scsi2 : SCSI emulation for USB Mass Storage devices
[ 17.710722] usb-storage: device found at 2
[ 17.710727] usb-storage: waiting for device to settle before scanning
[ 17.710802] scsi3 : SCSI emulation for USB Mass Storage devices
[ 17.710873] usb-storage: device found at 3
[ 17.710878] usb-storage: waiting for device to settle before scanning
[ 17.710898] usbcore: registered new interface driver usb-storage
[ 17.710905] USB Mass Storage support registered.
[ 10.280000] Time: acpi_pm clocksource has been installed.
[ 11.880000] Clocksource tsc unstable (delta = -79523967 ns)
[ 12.450000] ATL2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 15.050000] scsi 3:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 15.050000] scsi 2:0:0:0: Direct-Access Cn Memory 1100 PQ: 0 ANSI: 0 CCS
[ 15.050000] sd 3:0:0:0: Attached scsi removable disk sdb
[ 15.060000] SCSI device sdc: 1981440 512-byte hdwr sectors (1014 MB)
[ 15.070000] sdc: Write Protect is off
[ 15.070000] sdc: Mode Sense: 43 00 00 00
[ 15.070000] sdc: assuming drive cache: write through
[ 15.070000] usb-storage: device scan complete
[ 15.080000] SCSI device sdc: 1981440 512-byte hdwr sectors (1014 MB)
[ 15.080000] sdc: Write Protect is off
[ 15.080000] sdc: Mode Sense: 43 00 00 00
[ 15.080000] sdc: assuming drive cache: write through
[ 15.080000] sdc: sdc1
[ 15.080000] sd 2:0:0:0: Attached scsi removable disk sdc
[ 15.090000] usb-storage: device scan complete
[ 15.230000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 18.750000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.970000] Saving rdstate with cookie 1 [1.0]
[ 20.770000] Saving rdstate with cookie 2 [1.0]
[ 79.310000] unhashed dentry being revalidated: kcheckpass.1000
[ 92.730000] unhashed dentry being revalidated: .DCOPserver_asus-1550861408__0
[ 92.730000] unhashed dentry being revalidated: .DCOPserver_asus-1550861408__0
[ 92.730000] unhashed dentry being revalidated: .DCOPserver_asus-1550861408__0
[ 113.150000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 113.310000] usb 2-1: configuration #1 chosen from 1 choice
[ 113.320000] input: HID 1267:0103 as /class/input/input6
[ 113.320000] input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.1-1
[ 113.350000] input: HID 1267:0103 as /class/input/input7
[ 113.350000] input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.1-1
[ 116.810000] usb 2-1: USB disconnect, address 2
[ 119.600000] usb 2-1: new low speed USB device using uhci_hcd and address 3
[ 119.770000] usb 2-1: configuration #1 chosen from 1 choice
[ 119.790000] input: PS/2+USB Mouse as /class/input/input8
[ 119.790000] input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1