Public feed
#891165
Feb 4 00:45:34 proprio-lpt su[6574]: Successful su for root by proprio
Feb 4 00:45:34 proprio-lpt su[6574]: + pts/4 proprio:root
Feb 4 00:45:34 proprio-lpt su[6574]: pam_unix(su:session): session opened for user root by (uid=1000)
Feb 3 23:05:33 proprio-lpt -- MARK --
Feb 3 23:25:33 proprio-lpt -- MARK --
Feb 3 23:45:33 proprio-lpt -- MARK --
Feb 4 02:01:48 proprio-lpt wlan0: No ProbeResp from current AP 00:1d:a2:c7:f9:70 - assume out of range
Feb 4 02:09:16 proprio-lpt ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 4 02:09:16 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 02:09:16 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:09:16 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 02:09:16 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:09:17 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:09:17 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:09:17 proprio-lpt wlan0: authentication with AP 00:1d:a2:c7:f9:70 timed out
Feb 4 02:09:22 proprio-lpt rc-scripts: WARNING: net.wlan0 has not yet been started.
Feb 4 02:09:49 proprio-lpt ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 4 02:10:07 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 02:10:07 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:10:08 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:10:08 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:10:08 proprio-lpt wlan0: authentication with AP 00:1d:a2:c7:f9:70 timed out
Feb 4 02:10:59 proprio-lpt dhcpcd[8755]: wlan0: sending signal 15 to pid 5821
Feb 4 02:10:59 proprio-lpt dhcpcd[8755]: wlan0: exiting
Feb 4 02:10:59 proprio-lpt dhcpcd[5821]: wlan0: received SIGTERM, stopping
Feb 4 02:10:59 proprio-lpt dhcpcd[5821]: wlan0: removing default route via 147.161.36.10 metric 0
Feb 4 02:10:59 proprio-lpt dhcpcd[5821]: wlan0: netlink: No such process
Feb 4 02:10:59 proprio-lpt dhcpcd[5821]: wlan0: removing IP address 147.161.36.68/24
Feb 4 02:10:59 proprio-lpt dhcpcd[5821]: wlan0: netlink: Cannot assign requested address
Feb 4 02:10:59 proprio-lpt dhcpcd[5821]: wlan0: exiting
Feb 4 02:12:10 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 02:12:10 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:12:10 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:12:11 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:12:11 proprio-lpt wlan0: authentication with AP 00:1d:a2:c7:f9:70 timed out
Feb 4 02:12:34 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 02:12:34 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:12:34 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:12:34 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:12:34 proprio-lpt wlan0: authentication with AP 00:1d:a2:c7:f9:70 timed out
Feb 4 02:12:55 proprio-lpt dhcpcd[8779]: wlan0: dhcpcd 3.2.1 starting
Feb 4 02:12:55 proprio-lpt dhcpcd[8779]: wlan0: hardware address = 00:1b:77:2b:60:fd
Feb 4 02:12:55 proprio-lpt dhcpcd[8779]: wlan0: DUID = 00:01:00:01:0e:c2:e8:ea:00:16:d4:dd:e0:15
Feb 4 02:12:55 proprio-lpt dhcpcd[8779]: wlan0: broadcasting for a lease
Feb 4 02:13:01 proprio-lpt dhcpcd[8779]: wlan0: received SIGINT, stopping
Feb 4 02:13:01 proprio-lpt dhcpcd[8779]: wlan0: exiting
Feb 4 02:13:08 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 02:13:08 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:13:08 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:13:08 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:13:08 proprio-lpt wlan0: authentication with AP 00:1d:a2:c7:f9:70 timed out
Feb 4 02:31:19 proprio-lpt shutdown[14285]: shutting down for system reboot
Feb 4 02:31:19 proprio-lpt init: Switching to runlevel: 6
Feb 4 02:31:19 proprio-lpt su[5755]: pam_unix(su:session): session closed for user root
Feb 4 02:31:22 proprio-lpt su[6574]: pam_unix(su:session): session closed for user root
Feb 4 02:31:22 proprio-lpt su[5904]: pam_unix(su:session): session closed for user root
Feb 4 02:31:22 proprio-lpt kdm: :0[5660]: pam_unix(kde:session): session closed for user proprio
Feb 4 02:31:27 proprio-lpt hcid[3264]: Stopping SDP server
Feb 4 02:31:27 proprio-lpt hcid[3264]: Unregister path: /org/bluez/hci0
Feb 4 02:31:27 proprio-lpt hcid[3264]: Unregister path: /org/bluez
Feb 4 02:31:27 proprio-lpt hcid[3264]: Shutting down local server
Feb 4 02:31:27 proprio-lpt hcid[3264]: Exit
Feb 4 02:31:27 proprio-lpt input[3269]: Unregistered manager path
Feb 4 02:31:27 proprio-lpt input[3269]: Exit
Feb 4 02:31:28 proprio-lpt acpid: exiting
Feb 4 02:31:28 proprio-lpt syslog-ng[5129]: Termination requested via signal, terminating;
Feb 4 02:31:28 proprio-lpt syslog-ng[5129]: syslog-ng shutting down; version='2.0.8'
Feb 4 02:32:37 proprio-lpt syslog-ng[4962]: syslog-ng starting up; version='2.0.8'
Feb 4 02:32:37 proprio-lpt Linux version 2.6.24-gentoo (root@proprio-lpt) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #21 SMP Mon Feb 4 02:23:21 IST 2008
Feb 4 02:32:37 proprio-lpt BIOS-provided physical RAM map:
Feb 4 02:32:37 proprio-lpt BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 0000000000100000 - 000000007fec0000 (usable)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 000000007fec0000 - 000000007fecf000 (ACPI NVS)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 000000007fecf000 - 0000000080000000 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 4 02:32:37 proprio-lpt BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Feb 4 02:32:37 proprio-lpt 1150MB HIGHMEM available.
Feb 4 02:32:37 proprio-lpt 896MB LOWMEM available.
Feb 4 02:32:37 proprio-lpt found SMP MP-table at 000f7bc0
Feb 4 02:32:37 proprio-lpt Entering add_active_range(0, 0, 523968) 0 entries of 256 used
Feb 4 02:32:37 proprio-lpt Zone PFN ranges:
Feb 4 02:32:37 proprio-lpt DMA 0 -> 4096
Feb 4 02:32:37 proprio-lpt Normal 4096 -> 229376
Feb 4 02:32:37 proprio-lpt HighMem 229376 -> 523968
Feb 4 02:32:37 proprio-lpt Movable zone start PFN for each node
Feb 4 02:32:37 proprio-lpt early_node_map[1] active PFN ranges
Feb 4 02:32:37 proprio-lpt 0: 0 -> 523968
Feb 4 02:32:37 proprio-lpt On node 0 totalpages: 523968
Feb 4 02:32:37 proprio-lpt DMA zone: 32 pages used for memmap
Feb 4 02:32:37 proprio-lpt DMA zone: 0 pages reserved
Feb 4 02:32:37 proprio-lpt DMA zone: 4064 pages, LIFO batch:0
Feb 4 02:32:37 proprio-lpt Normal zone: 1760 pages used for memmap
Feb 4 02:32:37 proprio-lpt Normal zone: 223520 pages, LIFO batch:31
Feb 4 02:32:37 proprio-lpt HighMem zone: 2301 pages used for memmap
Feb 4 02:32:37 proprio-lpt HighMem zone: 292291 pages, LIFO batch:31
Feb 4 02:32:37 proprio-lpt Movable zone: 0 pages used for memmap
Feb 4 02:32:37 proprio-lpt DMI present.
Feb 4 02:32:37 proprio-lpt Using APIC driver default
Feb 4 02:32:37 proprio-lpt ACPI: RSDP 000F7B40, 0024 (r2 Compal)
Feb 4 02:32:37 proprio-lpt ACPI: XSDT 7FEC47F2, 008C (r1 Compal CRESTLNE 6040000 LTP 0)
Feb 4 02:32:37 proprio-lpt ACPI: FACP 7FECBBD2, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
Feb 4 02:32:37 proprio-lpt ACPI: DSDT 7FEC5B9F, 5FBF (r2 Compal CRESTLNE 6040000 INTL 20061109)
Feb 4 02:32:37 proprio-lpt ACPI: FACS 7FECEFC0, 0040
Feb 4 02:32:37 proprio-lpt ACPI: APIC 7FECBCC6, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Feb 4 02:32:37 proprio-lpt ACPI: HPET 7FECBD2E, 0038 (r1 Compal CRESTLNE 6040000 LOHR 5A)
Feb 4 02:32:37 proprio-lpt ACPI: MCFG 7FECBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Feb 4 02:32:37 proprio-lpt ACPI: TCPA 7FECBDA2, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A)
Feb 4 02:32:37 proprio-lpt ACPI: TMOR 7FECBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
Feb 4 02:32:37 proprio-lpt ACPI: SLIC 7FECBDFA, 0176 (r1 Compal CRESTLNE 6040000 TBD 1)
Feb 4 02:32:37 proprio-lpt ACPI: APIC 7FECBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
Feb 4 02:32:37 proprio-lpt ACPI: BOOT 7FECBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Feb 4 02:32:37 proprio-lpt ACPI: SSDT 7FEC58DA, 02C5 (r1 SataRe SataAhci 1000 INTL 20050624)
Feb 4 02:32:37 proprio-lpt ACPI: SSDT 7FEC4E0A, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
Feb 4 02:32:37 proprio-lpt ACPI: SSDT 7FEC4D64, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
Feb 4 02:32:37 proprio-lpt ACPI: SSDT 7FEC487E, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
Feb 4 02:32:37 proprio-lpt ACPI: BIOS bug: multiple APIC/MADT found, using 0
Feb 4 02:32:37 proprio-lpt ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Feb 4 02:32:37 proprio-lpt ACPI: DMI detected: Compal
Feb 4 02:32:37 proprio-lpt ACPI: PM-Timer IO Port: 0x1008
Feb 4 02:32:37 proprio-lpt ACPI: Local APIC address 0xfee00000
Feb 4 02:32:37 proprio-lpt ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Feb 4 02:32:37 proprio-lpt Processor #0 6:15 APIC version 20
Feb 4 02:32:37 proprio-lpt ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Feb 4 02:32:37 proprio-lpt Processor #1 6:15 APIC version 20
Feb 4 02:32:37 proprio-lpt ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Feb 4 02:32:37 proprio-lpt ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Feb 4 02:32:37 proprio-lpt ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Feb 4 02:32:37 proprio-lpt IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Feb 4 02:32:37 proprio-lpt ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 4 02:32:37 proprio-lpt ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 4 02:32:37 proprio-lpt ACPI: IRQ0 used by override.
Feb 4 02:32:37 proprio-lpt ACPI: IRQ2 used by override.
Feb 4 02:32:37 proprio-lpt ACPI: IRQ9 used by override.
Feb 4 02:32:37 proprio-lpt Enabling APIC mode: Flat. Using 1 I/O APICs
Feb 4 02:32:37 proprio-lpt ACPI: HPET id: 0x8086a201 base: 0xfed00000
Feb 4 02:32:37 proprio-lpt Using ACPI (MADT) for SMP configuration information
Feb 4 02:32:37 proprio-lpt Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Feb 4 02:32:37 proprio-lpt swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000
Feb 4 02:32:37 proprio-lpt swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000
Feb 4 02:32:37 proprio-lpt swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
Feb 4 02:32:37 proprio-lpt swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
Feb 4 02:32:37 proprio-lpt swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
Feb 4 02:32:37 proprio-lpt swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Feb 4 02:32:37 proprio-lpt Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519875
Feb 4 02:32:37 proprio-lpt Kernel command line: root=/dev/sda5
Feb 4 02:32:37 proprio-lpt mapped APIC to ffffb000 (fee00000)
Feb 4 02:32:37 proprio-lpt mapped IOAPIC to ffffa000 (fec00000)
Feb 4 02:32:37 proprio-lpt Enabling fast FPU save and restore... done.
Feb 4 02:32:37 proprio-lpt Enabling unmasked SIMD FPU exception support... done.
Feb 4 02:32:37 proprio-lpt Initializing CPU#0
Feb 4 02:32:37 proprio-lpt PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb 4 02:32:37 proprio-lpt Detected 2194.563 MHz processor.
Feb 4 02:32:37 proprio-lpt Console: colour VGA+ 80x25
Feb 4 02:32:37 proprio-lpt console [tty0] enabled
Feb 4 02:32:37 proprio-lpt Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 4 02:32:37 proprio-lpt Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 4 02:32:37 proprio-lpt Memory: 2071036k/2095872k available (3482k kernel code, 23576k reserved, 1730k data, 248k init, 1178368k highmem)
Feb 4 02:32:37 proprio-lpt virtual kernel memory layout:
Feb 4 02:32:37 proprio-lpt fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
Feb 4 02:32:37 proprio-lpt pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 4 02:32:37 proprio-lpt vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Feb 4 02:32:37 proprio-lpt lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Feb 4 02:32:37 proprio-lpt .init : 0xc0620000 - 0xc065e000 ( 248 kB)
Feb 4 02:32:37 proprio-lpt .data : 0xc0466bec - 0xc06177ac (1730 kB)
Feb 4 02:32:37 proprio-lpt .text : 0xc0100000 - 0xc0466bec (3482 kB)
Feb 4 02:32:37 proprio-lpt Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb 4 02:32:37 proprio-lpt hpet clockevent registered
Feb 4 02:32:37 proprio-lpt Calibrating delay using timer specific routine.. 4393.69 BogoMIPS (lpj=8787394)
Feb 4 02:32:37 proprio-lpt Mount-cache hash table entries: 512
Feb 4 02:32:37 proprio-lpt CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
Feb 4 02:32:37 proprio-lpt monitor/mwait feature present.
Feb 4 02:32:37 proprio-lpt using mwait in idle threads.
Feb 4 02:32:37 proprio-lpt CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 4 02:32:37 proprio-lpt CPU: L2 cache: 4096K
Feb 4 02:32:37 proprio-lpt CPU: Physical Processor ID: 0
Feb 4 02:32:37 proprio-lpt CPU: Processor Core ID: 0
Feb 4 02:32:37 proprio-lpt CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Feb 4 02:32:37 proprio-lpt Intel machine check architecture supported.
Feb 4 02:32:37 proprio-lpt Intel machine check reporting enabled on CPU#0.
Feb 4 02:32:37 proprio-lpt Compat vDSO mapped to ffffe000.
Feb 4 02:32:37 proprio-lpt Checking 'hlt' instruction... OK.
Feb 4 02:32:37 proprio-lpt SMP alternatives: switching to UP code
Feb 4 02:32:37 proprio-lpt ACPI: Core revision 20070126
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [DSDT](id 0001) - 962 Objects with 69 Devices 175 Methods 27 Regions
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [SSDT](id 0002) - 15 Objects with 3 Devices 9 Methods 0 Regions
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions
Feb 4 02:32:37 proprio-lpt tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
Feb 4 02:32:37 proprio-lpt evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Feb 4 02:32:37 proprio-lpt CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Feb 4 02:32:37 proprio-lpt SMP alternatives: switching to SMP code
Feb 4 02:32:37 proprio-lpt Booting processor 1/1 eip 3000
Feb 4 02:32:37 proprio-lpt Initializing CPU#1
Feb 4 02:32:37 proprio-lpt Calibrating delay using timer specific routine.. 4389.05 BogoMIPS (lpj=8778110)
Feb 4 02:32:37 proprio-lpt CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
Feb 4 02:32:37 proprio-lpt monitor/mwait feature present.
Feb 4 02:32:37 proprio-lpt CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 4 02:32:37 proprio-lpt CPU: L2 cache: 4096K
Feb 4 02:32:37 proprio-lpt CPU: Physical Processor ID: 0
Feb 4 02:32:37 proprio-lpt CPU: Processor Core ID: 1
Feb 4 02:32:37 proprio-lpt CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Feb 4 02:32:37 proprio-lpt Intel machine check architecture supported.
Feb 4 02:32:37 proprio-lpt Intel machine check reporting enabled on CPU#1.
Feb 4 02:32:37 proprio-lpt CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Feb 4 02:32:37 proprio-lpt Total of 2 processors activated (8782.75 BogoMIPS).
Feb 4 02:32:37 proprio-lpt ENABLING IO-APIC IRQs
Feb 4 02:32:37 proprio-lpt ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 4 02:32:37 proprio-lpt checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Feb 4 02:32:37 proprio-lpt Brought up 2 CPUs
Feb 4 02:32:37 proprio-lpt CPU0 attaching sched-domain:
Feb 4 02:32:37 proprio-lpt domain 0: span 00000003
Feb 4 02:32:37 proprio-lpt groups: 00000001 00000002
Feb 4 02:32:37 proprio-lpt CPU1 attaching sched-domain:
Feb 4 02:32:37 proprio-lpt domain 0: span 00000003
Feb 4 02:32:37 proprio-lpt groups: 00000002 00000001
Feb 4 02:32:37 proprio-lpt net_namespace: 64 bytes
Feb 4 02:32:37 proprio-lpt NET: Registered protocol family 16
Feb 4 02:32:37 proprio-lpt ACPI: bus type pci registered
Feb 4 02:32:37 proprio-lpt PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Feb 4 02:32:37 proprio-lpt PCI: Not using MMCONFIG.
Feb 4 02:32:37 proprio-lpt PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
Feb 4 02:32:37 proprio-lpt PCI: Using configuration type 1
Feb 4 02:32:37 proprio-lpt Setting up standard PCI resources
Feb 4 02:32:37 proprio-lpt evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
Feb 4 02:32:37 proprio-lpt evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 10 Runtime GPEs in this block
Feb 4 02:32:37 proprio-lpt ACPI: EC: Look up EC in DSDT
Feb 4 02:32:37 proprio-lpt Completing Region/Field/Buffer/Package initialization:..........................................................
Feb 4 02:32:37 proprio-lpt Initialized 21/27 Regions 0/0 Fields 26/27 Buffers 11/13 Packages (1010 nodes)
Feb 4 02:32:37 proprio-lpt Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI
Feb 4 02:32:37 proprio-lpt ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
Feb 4 02:32:37 proprio-lpt .
Feb 4 02:32:37 proprio-lpt Executed 1 _INI methods requiring 0 _STA executions (examined 76 objects)
Feb 4 02:32:37 proprio-lpt ACPI: Interpreter enabled
Feb 4 02:32:37 proprio-lpt ACPI: (supports S0 S3 S4 S5)
Feb 4 02:32:37 proprio-lpt ACPI: Using IOAPIC for interrupt routing
Feb 4 02:32:37 proprio-lpt ACPI: EC: non-query interrupt received, switching to interrupt mode
Feb 4 02:32:37 proprio-lpt ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Feb 4 02:32:37 proprio-lpt ACPI: EC: driver started in interrupt mode
Feb 4 02:32:37 proprio-lpt ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 4 02:32:37 proprio-lpt PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Feb 4 02:32:37 proprio-lpt PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Feb 4 02:32:37 proprio-lpt PCI: Transparent bridge - 0000:00:1e.0
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 02:32:37 proprio-lpt Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 4 02:32:37 proprio-lpt pnp: PnP ACPI init
Feb 4 02:32:37 proprio-lpt ACPI: bus type pnp registered
Feb 4 02:32:37 proprio-lpt pnp: PnP ACPI: found 11 devices
Feb 4 02:32:37 proprio-lpt ACPI: ACPI bus type pnp unregistered
Feb 4 02:32:37 proprio-lpt SCSI subsystem initialized
Feb 4 02:32:37 proprio-lpt libata version 3.00 loaded.
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver usbfs
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver hub
Feb 4 02:32:37 proprio-lpt usbcore: registered new device driver usb
Feb 4 02:32:37 proprio-lpt PCI: Using ACPI for IRQ routing
Feb 4 02:32:37 proprio-lpt PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Feb 4 02:32:37 proprio-lpt Bluetooth: Core ver 2.11
Feb 4 02:32:37 proprio-lpt NET: Registered protocol family 31
Feb 4 02:32:37 proprio-lpt Bluetooth: HCI device and connection manager initialized
Feb 4 02:32:37 proprio-lpt Bluetooth: HCI socket layer initialized
Feb 4 02:32:37 proprio-lpt hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Feb 4 02:32:37 proprio-lpt hpet0: 3 64-bit timers, 14318180 Hz
Feb 4 02:32:37 proprio-lpt Time: tsc clocksource has been installed.
Feb 4 02:32:37 proprio-lpt Switched to high resolution mode on CPU 0
Feb 4 02:32:37 proprio-lpt Switched to high resolution mode on CPU 1
Feb 4 02:32:37 proprio-lpt system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Feb 4 02:32:37 proprio-lpt system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
Feb 4 02:32:37 proprio-lpt system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
Feb 4 02:32:37 proprio-lpt system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
Feb 4 02:32:37 proprio-lpt system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Feb 4 02:32:37 proprio-lpt system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
Feb 4 02:32:37 proprio-lpt system 00:01: iomem range 0x0-0x0 could not be reserved
Feb 4 02:32:37 proprio-lpt system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
Feb 4 02:32:37 proprio-lpt system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Feb 4 02:32:37 proprio-lpt system 00:06: ioport range 0x680-0x69f has been reserved
Feb 4 02:32:37 proprio-lpt system 00:06: ioport range 0x800-0x80f has been reserved
Feb 4 02:32:37 proprio-lpt system 00:06: ioport range 0x1000-0x107f has been reserved
Feb 4 02:32:37 proprio-lpt system 00:06: ioport range 0x1180-0x11bf has been reserved
Feb 4 02:32:37 proprio-lpt system 00:06: ioport range 0x1640-0x164f has been reserved
Feb 4 02:32:37 proprio-lpt system 00:06: ioport range 0xfe00-0xfe00 has been reserved
Feb 4 02:32:37 proprio-lpt system 00:06: ioport range 0xff00-0xff7f has been reserved
Feb 4 02:32:37 proprio-lpt PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
Feb 4 02:32:37 proprio-lpt PCI: Bridge: 0000:00:01.0
Feb 4 02:32:37 proprio-lpt IO window: 2000-2fff
Feb 4 02:32:37 proprio-lpt MEM window: c4000000-c6ffffff
Feb 4 02:32:37 proprio-lpt PREFETCH window: d0000000-dfffffff
Feb 4 02:32:37 proprio-lpt PCI: Bridge: 0000:00:1c.0
Feb 4 02:32:37 proprio-lpt IO window: 3000-3fff
Feb 4 02:32:37 proprio-lpt MEM window: bc000000-bfffffff
Feb 4 02:32:37 proprio-lpt PREFETCH window: cc000000-cdffffff
Feb 4 02:32:37 proprio-lpt PCI: Bridge: 0000:00:1c.1
Feb 4 02:32:37 proprio-lpt IO window: 4000-4fff
Feb 4 02:32:37 proprio-lpt MEM window: f0000000-f3ffffff
Feb 4 02:32:37 proprio-lpt PREFETCH window: fa000000-fbffffff
Feb 4 02:32:37 proprio-lpt PCI: Bridge: 0000:00:1c.2
Feb 4 02:32:37 proprio-lpt IO window: 5000-5fff
Feb 4 02:32:37 proprio-lpt MEM window: f4000000-f7ffffff
Feb 4 02:32:37 proprio-lpt PREFETCH window: fc000000-fdffffff
Feb 4 02:32:37 proprio-lpt PCI: Bridge: 0000:00:1c.3
Feb 4 02:32:37 proprio-lpt IO window: 6000-6fff
Feb 4 02:32:37 proprio-lpt MEM window: b4000000-b7ffffff
Feb 4 02:32:37 proprio-lpt PREFETCH window: c8000000-c9ffffff
Feb 4 02:32:37 proprio-lpt PCI: Bridge: 0000:00:1c.4
Feb 4 02:32:37 proprio-lpt IO window: 7000-7fff
Feb 4 02:32:37 proprio-lpt MEM window: f8100000-f81fffff
Feb 4 02:32:37 proprio-lpt PREFETCH window: 88000000-880fffff
Feb 4 02:32:37 proprio-lpt PCI: Bridge: 0000:00:1c.5
Feb 4 02:32:37 proprio-lpt IO window: disabled.
Feb 4 02:32:37 proprio-lpt MEM window: f8000000-f80fffff
Feb 4 02:32:37 proprio-lpt PREFETCH window: disabled.
Feb 4 02:32:37 proprio-lpt PCI: Bridge: 0000:00:1e.0
Feb 4 02:32:37 proprio-lpt IO window: disabled.
Feb 4 02:32:37 proprio-lpt MEM window: f8200000-f82fffff
Feb 4 02:32:37 proprio-lpt PREFETCH window: disabled.
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.0 to 64
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.1 to 64
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.2 to 64
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.3 to 64
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.4 to 64
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.5 to 64
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1e.0 to 64
Feb 4 02:32:37 proprio-lpt NET: Registered protocol family 2
Feb 4 02:32:37 proprio-lpt IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 4 02:32:37 proprio-lpt TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 4 02:32:37 proprio-lpt TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 4 02:32:37 proprio-lpt TCP: Hash tables configured (established 131072 bind 65536)
Feb 4 02:32:37 proprio-lpt TCP reno registered
Feb 4 02:32:37 proprio-lpt Simple Boot Flag at 0x38 set to 0x1
Feb 4 02:32:37 proprio-lpt Machine check exception polling timer started.
Feb 4 02:32:37 proprio-lpt IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Feb 4 02:32:37 proprio-lpt highmem bounce pool size: 64 pages
Feb 4 02:32:37 proprio-lpt Total HugeTLB memory allocated, 0
Feb 4 02:32:37 proprio-lpt Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Feb 4 02:32:37 proprio-lpt NTFS driver 2.1.29 [Flags: R/O].
Feb 4 02:32:37 proprio-lpt io scheduler noop registered
Feb 4 02:32:37 proprio-lpt io scheduler anticipatory registered (default)
Feb 4 02:32:37 proprio-lpt io scheduler deadline registered
Feb 4 02:32:37 proprio-lpt io scheduler cfq registered
Feb 4 02:32:37 proprio-lpt Boot video device is 0000:01:00.0
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 4 02:32:37 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:01.0:pcie00]
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:01.0:pcie02]
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.0 to 64
Feb 4 02:32:37 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.0:pcie00]
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.0:pcie02]
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.1 to 64
Feb 4 02:32:37 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.1:pcie00]
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.1:pcie02]
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.2 to 64
Feb 4 02:32:37 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.2:pcie00]
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.2:pcie02]
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.3 to 64
Feb 4 02:32:37 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.3:pcie00]
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.3:pcie02]
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.4 to 64
Feb 4 02:32:37 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.4:pcie00]
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.4:pcie02]
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.5 to 64
Feb 4 02:32:37 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.5:pcie00]
Feb 4 02:32:37 proprio-lpt Allocate Port Service[0000:00:1c.5:pcie02]
Feb 4 02:32:37 proprio-lpt Real Time Clock Driver v1.12ac
Feb 4 02:32:37 proprio-lpt hpet_resources: 0xfed00000 is busy
Feb 4 02:32:37 proprio-lpt Linux agpgart interface v0.102
Feb 4 02:32:37 proprio-lpt Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Feb 4 02:32:37 proprio-lpt Hangcheck: Using get_cycles().
Feb 4 02:32:37 proprio-lpt ACPI: AC Adapter [ACAD] (on-line)
Feb 4 02:32:37 proprio-lpt ACPI: Battery Slot [BAT1] (battery present)
Feb 4 02:32:37 proprio-lpt input: Power Button (FF) as /class/input/input0
Feb 4 02:32:37 proprio-lpt ACPI: Power Button (FF) [PWRF]
Feb 4 02:32:37 proprio-lpt input: Lid Switch as /class/input/input1
Feb 4 02:32:37 proprio-lpt ACPI: Lid Switch [LID0]
Feb 4 02:32:37 proprio-lpt input: Power Button (CM) as /class/input/input2
Feb 4 02:32:37 proprio-lpt ACPI: Power Button (CM) [PWRB]
Feb 4 02:32:37 proprio-lpt ACPI: SSDT 7FEC5598, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [SSDT](id 009F) - 6 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 02:32:37 proprio-lpt ACPI: SSDT 7FEC5069, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [SSDT](id 00A0) - 1 Objects with 0 Devices 1 Methods 0 Regions
Feb 4 02:32:37 proprio-lpt Monitor-Mwait will be used to enter C-1 state
Feb 4 02:32:37 proprio-lpt Monitor-Mwait will be used to enter C-2 state
Feb 4 02:32:37 proprio-lpt Monitor-Mwait will be used to enter C-3 state
Feb 4 02:32:37 proprio-lpt ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Feb 4 02:32:37 proprio-lpt ACPI: Processor [CPU0] (supports 8 throttling states)
Feb 4 02:32:37 proprio-lpt ACPI: SSDT 7FEC5812, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [SSDT](id 00A9) - 4 Objects with 0 Devices 4 Methods 0 Regions
Feb 4 02:32:37 proprio-lpt ACPI: SSDT 7FEC5513, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Feb 4 02:32:37 proprio-lpt Parsing all Control Methods:
Feb 4 02:32:37 proprio-lpt Table [SSDT](id 00AA) - 1 Objects with 0 Devices 1 Methods 0 Regions
Feb 4 02:32:37 proprio-lpt ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Feb 4 02:32:37 proprio-lpt ACPI: Processor [CPU1] (supports 8 throttling states)
Feb 4 02:32:37 proprio-lpt isapnp: Scanning for PnP cards...
Feb 4 02:32:37 proprio-lpt isapnp: No Plug & Play device found
Feb 4 02:32:37 proprio-lpt Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Feb 4 02:32:37 proprio-lpt floppy0: no floppy controllers found
Feb 4 02:32:37 proprio-lpt RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Feb 4 02:32:37 proprio-lpt loop: module loaded
Feb 4 02:32:37 proprio-lpt Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Feb 4 02:32:37 proprio-lpt Copyright (c) 1999-2006 Intel Corporation.
Feb 4 02:32:37 proprio-lpt e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
Feb 4 02:32:37 proprio-lpt e1000e: Copyright (c) 1999-2007 Intel Corporation.
Feb 4 02:32:37 proprio-lpt ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.1.18
Feb 4 02:32:37 proprio-lpt ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Feb 4 02:32:37 proprio-lpt e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
Feb 4 02:32:37 proprio-lpt e100: Copyright(c) 1999-2006 Intel Corporation
Feb 4 02:32:37 proprio-lpt tg3.c:v3.86 (November 9, 2007)
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:04:00.0 to 64
Feb 4 02:32:37 proprio-lpt eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:dd:e0:15
Feb 4 02:32:37 proprio-lpt eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Feb 4 02:32:37 proprio-lpt eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Feb 4 02:32:37 proprio-lpt PPP generic driver version 2.4.2
Feb 4 02:32:37 proprio-lpt NET: Registered protocol family 24
Feb 4 02:32:37 proprio-lpt PPPoL2TP kernel driver, V1.0
Feb 4 02:32:37 proprio-lpt console [netcon0] enabled
Feb 4 02:32:37 proprio-lpt netconsole: network logging started
Feb 4 02:32:37 proprio-lpt Linux video capture interface: v2.00
Feb 4 02:32:37 proprio-lpt et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver et61x251
Feb 4 02:32:37 proprio-lpt zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver zc0301
Feb 4 02:32:37 proprio-lpt Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 4 02:32:37 proprio-lpt ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 4 02:32:37 proprio-lpt ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
Feb 4 02:32:37 proprio-lpt ICH8M: not 100% native mode: will probe irqs later
Feb 4 02:32:37 proprio-lpt ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
Feb 4 02:32:37 proprio-lpt ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:pio, hdd:pio
Feb 4 02:32:37 proprio-lpt Probing IDE interface ide0...
Feb 4 02:32:37 proprio-lpt hda: Slimtype DVDRW SSM-8515S, ATAPI CD/DVD-ROM drive
Feb 4 02:32:37 proprio-lpt hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Feb 4 02:32:37 proprio-lpt hda: UDMA/33 mode selected
Feb 4 02:32:37 proprio-lpt ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 4 02:32:37 proprio-lpt Probing IDE interface ide1...
Feb 4 02:32:37 proprio-lpt Probing IDE interface ide1...
Feb 4 02:32:37 proprio-lpt hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Feb 4 02:32:37 proprio-lpt Uniform CD-ROM driver Revision: 3.20
Feb 4 02:32:37 proprio-lpt Driver 'sd' needs updating - please use bus_type methods
Feb 4 02:32:37 proprio-lpt ahci 0000:00:1f.2: version 3.0
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Feb 4 02:32:37 proprio-lpt ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
Feb 4 02:32:37 proprio-lpt ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1f.2 to 64
Feb 4 02:32:37 proprio-lpt scsi0 : ahci
Feb 4 02:32:37 proprio-lpt scsi1 : ahci
Feb 4 02:32:37 proprio-lpt scsi2 : ahci
Feb 4 02:32:37 proprio-lpt ata1: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504100 irq 216
Feb 4 02:32:37 proprio-lpt ata2: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504180 irq 216
Feb 4 02:32:37 proprio-lpt ata3: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504200 irq 216
Feb 4 02:32:37 proprio-lpt ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 4 02:32:37 proprio-lpt ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
Feb 4 02:32:37 proprio-lpt ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
Feb 4 02:32:37 proprio-lpt ata1.00: configured for UDMA/133
Feb 4 02:32:37 proprio-lpt ata2: SATA link down (SStatus 0 SControl 300)
Feb 4 02:32:37 proprio-lpt ata3: SATA link down (SStatus 0 SControl 300)
Feb 4 02:32:37 proprio-lpt scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] Write Protect is off
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] Write Protect is off
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 4 02:32:37 proprio-lpt sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
Feb 4 02:32:37 proprio-lpt sd 0:0:0:0: [sda] Attached SCSI disk
Feb 4 02:32:37 proprio-lpt I2O subsystem v1.325
Feb 4 02:32:37 proprio-lpt i2o: max drivers = 8
Feb 4 02:32:37 proprio-lpt Fusion MPT base driver 3.04.06
Feb 4 02:32:37 proprio-lpt Copyright (c) 1999-2007 LSI Corporation
Feb 4 02:32:37 proprio-lpt Fusion MPT SPI Host driver 3.04.06
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:0e:06.0[A] -> GSI 22 (level, low) -> IRQ 20
Feb 4 02:32:37 proprio-lpt ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f8200000-f82007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Feb 4 02:32:37 proprio-lpt ieee1394: raw1394: /dev/raw1394 device initialized
Feb 4 02:32:37 proprio-lpt usbmon: debugfs is not available
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.7 to 64
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1a.7: EHCI Host Controller
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1a.7: debug port 1
Feb 4 02:32:37 proprio-lpt PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 4 02:32:37 proprio-lpt usb usb1: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt hub 1-0:1.0: USB hub found
Feb 4 02:32:37 proprio-lpt hub 1-0:1.0: 4 ports detected
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.7 to 64
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1d.7: EHCI Host Controller
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1d.7: debug port 1
Feb 4 02:32:37 proprio-lpt PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf8504c00
Feb 4 02:32:37 proprio-lpt ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 4 02:32:37 proprio-lpt usb usb2: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt hub 2-0:1.0: USB hub found
Feb 4 02:32:37 proprio-lpt hub 2-0:1.0: 6 ports detected
Feb 4 02:32:37 proprio-lpt ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Feb 4 02:32:37 proprio-lpt USB Universal Host Controller Interface driver v3.0
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.0 to 64
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1a.0: UHCI Host Controller
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
Feb 4 02:32:37 proprio-lpt usb usb3: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt hub 3-0:1.0: USB hub found
Feb 4 02:32:37 proprio-lpt hub 3-0:1.0: 2 ports detected
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.1 to 64
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1a.1: UHCI Host Controller
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1a.1: irq 22, io base 0x00001820
Feb 4 02:32:37 proprio-lpt usb usb4: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt hub 4-0:1.0: USB hub found
Feb 4 02:32:37 proprio-lpt hub 4-0:1.0: 2 ports detected
Feb 4 02:32:37 proprio-lpt usb 1-2: new high speed USB device using ehci_hcd and address 2
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.0 to 64
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001840
Feb 4 02:32:37 proprio-lpt usb usb5: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt hub 5-0:1.0: USB hub found
Feb 4 02:32:37 proprio-lpt hub 5-0:1.0: 2 ports detected
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.1 to 64
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
Feb 4 02:32:37 proprio-lpt usb usb6: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt hub 6-0:1.0: USB hub found
Feb 4 02:32:37 proprio-lpt hub 6-0:1.0: 2 ports detected
Feb 4 02:32:37 proprio-lpt usb 1-2: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.2 to 64
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Feb 4 02:32:37 proprio-lpt uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
Feb 4 02:32:37 proprio-lpt usb usb7: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt hub 7-0:1.0: USB hub found
Feb 4 02:32:37 proprio-lpt hub 7-0:1.0: 2 ports detected
Feb 4 02:32:37 proprio-lpt ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f75b2402bff]
Feb 4 02:32:37 proprio-lpt usb 4-1: new full speed USB device using uhci_hcd and address 2
Feb 4 02:32:37 proprio-lpt usb 4-1: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt usb 4-2: new full speed USB device using uhci_hcd and address 3
Feb 4 02:32:37 proprio-lpt usb 4-2: configuration #1 chosen from 1 choice
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver usblp
Feb 4 02:32:37 proprio-lpt Initializing USB Mass Storage driver...
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver usb-storage
Feb 4 02:32:37 proprio-lpt USB Mass Storage support registered.
Feb 4 02:32:37 proprio-lpt PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 4 02:32:37 proprio-lpt serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 4 02:32:37 proprio-lpt serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 4 02:32:37 proprio-lpt mice: PS/2 mouse device common for all mice
Feb 4 02:32:37 proprio-lpt input: AT Translated Set 2 keyboard as /class/input/input3
Feb 4 02:32:37 proprio-lpt i2c /dev entries driver
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
Feb 4 02:32:37 proprio-lpt input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
Feb 4 02:32:37 proprio-lpt Bluetooth: Virtual HCI driver ver 1.2
Feb 4 02:32:37 proprio-lpt Bluetooth: HCI UART driver ver 2.2
Feb 4 02:32:37 proprio-lpt Bluetooth: HCI H4 protocol initialized
Feb 4 02:32:37 proprio-lpt Bluetooth: HCI BCSP protocol initialized
Feb 4 02:32:37 proprio-lpt Bluetooth: HCILL protocol initialized
Feb 4 02:32:37 proprio-lpt Bluetooth: Broadcom Blutonium firmware driver ver 1.1
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver bcm203x
Feb 4 02:32:37 proprio-lpt Bluetooth: Digianswer Bluetooth USB driver ver 0.9
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver bpa10x
Feb 4 02:32:37 proprio-lpt Bluetooth: BlueFRITZ! USB driver ver 1.1
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver bfusb
Feb 4 02:32:37 proprio-lpt Bluetooth: Generic Bluetooth USB driver ver 0.1
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver btusb
Feb 4 02:32:37 proprio-lpt Bluetooth: Generic Bluetooth SDIO driver ver 0.1
Feb 4 02:32:37 proprio-lpt cpuidle: using governor ladder
Feb 4 02:32:37 proprio-lpt cpuidle: using governor menu
Feb 4 02:32:37 proprio-lpt sdhci: Secure Digital Host Controller Interface driver
Feb 4 02:32:37 proprio-lpt sdhci: Copyright(c) Pierre Ossman
Feb 4 02:32:37 proprio-lpt Marking TSC unstable due to: TSC halts in idle.
Feb 4 02:32:37 proprio-lpt sdhci: SDHCI controller found at 0000:0e:06.1 [1180:0822] (rev 22)
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:0e:06.1[B] -> GSI 23 (level, low) -> IRQ 21
Feb 4 02:32:37 proprio-lpt sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Feb 4 02:32:37 proprio-lpt mmc0: SDHCI at 0xf8200800 irq 21 DMA
Feb 4 02:32:37 proprio-lpt ricoh-mmc: Ricoh MMC Controller disabling driver
Feb 4 02:32:37 proprio-lpt ricoh-mmc: Copyright(c) Philip Langdale
Feb 4 02:32:37 proprio-lpt Time: hpet clocksource has been installed.
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver usbhid
Feb 4 02:32:37 proprio-lpt drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Feb 4 02:32:37 proprio-lpt TCP cubic registered
Feb 4 02:32:37 proprio-lpt NET: Registered protocol family 1
Feb 4 02:32:37 proprio-lpt NET: Registered protocol family 10
Feb 4 02:32:37 proprio-lpt IPv6 over IPv4 tunneling driver
Feb 4 02:32:37 proprio-lpt NET: Registered protocol family 17
Feb 4 02:32:37 proprio-lpt Bluetooth: L2CAP ver 2.9
Feb 4 02:32:37 proprio-lpt Bluetooth: L2CAP socket layer initialized
Feb 4 02:32:37 proprio-lpt Bluetooth: SCO (Voice Link) ver 0.5
Feb 4 02:32:37 proprio-lpt Bluetooth: SCO socket layer initialized
Feb 4 02:32:37 proprio-lpt Bluetooth: RFCOMM socket layer initialized
Feb 4 02:32:37 proprio-lpt Bluetooth: RFCOMM TTY layer initialized
Feb 4 02:32:37 proprio-lpt Bluetooth: RFCOMM ver 1.8
Feb 4 02:32:37 proprio-lpt Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Feb 4 02:32:37 proprio-lpt Bluetooth: BNEP filters: protocol multicast
Feb 4 02:32:37 proprio-lpt RPC: Registered udp transport module.
Feb 4 02:32:37 proprio-lpt RPC: Registered tcp transport module.
Feb 4 02:32:37 proprio-lpt Using IPI No-Shortcut mode
Feb 4 02:32:37 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 02:32:37 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 02:32:37 proprio-lpt VFS: Mounted root (ext3 filesystem) readonly.
Feb 4 02:32:37 proprio-lpt Freeing unused kernel memory: 248k freed
Feb 4 02:32:37 proprio-lpt Clocksource tsc unstable (delta = -317565688 ns)
Feb 4 02:32:37 proprio-lpt uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
Feb 4 02:32:37 proprio-lpt usbcore: registered new interface driver uvcvideo
Feb 4 02:32:37 proprio-lpt USB Video Class driver (v0.1.0)
Feb 4 02:32:37 proprio-lpt iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
Feb 4 02:32:37 proprio-lpt iwl3945: Copyright(c) 2003-2007 Intel Corporation
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:0c:00.0 to 64
Feb 4 02:32:37 proprio-lpt iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:00:1b.0 to 64
Feb 4 02:32:37 proprio-lpt nvidia: module license 'NVIDIA' taints kernel.
Feb 4 02:32:37 proprio-lpt ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 02:32:37 proprio-lpt PCI: Setting latency timer of device 0000:01:00.0 to 64
Feb 4 02:32:37 proprio-lpt NVRM: loading NVIDIA UNIX x86 Kernel Module 169.09 Fri Jan 11 14:38:28 PST 2008
Feb 4 02:32:37 proprio-lpt iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Feb 4 02:32:37 proprio-lpt phy0: Selected rate control algorithm 'iwl-3945-rs'
Feb 4 02:32:37 proprio-lpt EXT3 FS on sda5, internal journal
Feb 4 02:32:37 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 02:32:37 proprio-lpt EXT3 FS on sda6, internal journal
Feb 4 02:32:37 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 02:32:37 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 02:32:37 proprio-lpt EXT3 FS on sda2, internal journal
Feb 4 02:32:37 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 02:32:37 proprio-lpt fuse init (API version 7.8)
Feb 4 02:32:37 proprio-lpt fuse distribution version: 2.7.2
Feb 4 02:32:37 proprio-lpt Adding 1044184k swap on /dev/sda7. Priority:-1 extents:1 across:1044184k
Feb 4 02:32:37 proprio-lpt ADDRCONF(NETDEV_UP): eth0: link is not ready
Feb 4 02:32:38 proprio-lpt acpid: starting up
Feb 4 02:32:38 proprio-lpt acpid: 1 rule loaded
Feb 4 02:32:40 proprio-lpt acpid: client connected from 5086[104:1002]
Feb 4 02:32:40 proprio-lpt acpid: 1 client rule loaded
Feb 4 02:32:46 proprio-lpt acpid: client connected from 5461[0:0]
Feb 4 02:32:46 proprio-lpt acpid: 1 client rule loaded
Feb 4 02:32:52 proprio-lpt acpid: client connected from 5461[0:0]
Feb 4 02:32:52 proprio-lpt acpid: 1 client rule loaded
Feb 4 02:33:03 proprio-lpt kdm: :0[5493]: pam_unix(kde:session): session opened for user proprio by (uid=0)
Feb 4 02:33:09 proprio-lpt login[5475]: pam_unix(login:session): session opened for user proprio by LOGIN(uid=0)
Feb 4 02:33:11 proprio-lpt su[5581]: pam_unix(su:auth): authentication failure; logname=proprio uid=1000 euid=0 tty=tty1 ruser=proprio rhost= user=root
Feb 4 02:33:13 proprio-lpt su[5581]: pam_authenticate: Échec d'authentification
Feb 4 02:33:13 proprio-lpt su[5581]: FAILED su for root by proprio
Feb 4 02:33:13 proprio-lpt su[5581]: - tty1 proprio:root
Feb 4 02:33:16 proprio-lpt su[5594]: Successful su for root by proprio
Feb 4 02:33:16 proprio-lpt su[5594]: + tty1 proprio:root
Feb 4 02:33:16 proprio-lpt su[5594]: pam_unix(su:session): session opened for user root by proprio(uid=1000)
Feb 4 02:33:23 proprio-lpt hcid[3161]: Default passkey agent (:1.7, /org/kde/kbluetooth_1234) registered
Feb 4 02:33:23 proprio-lpt hcid[3161]: Default authorization agent (:1.7, /org/kde/kbluetooth_auth_1234) registered
Feb 4 02:33:24 proprio-lpt ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 4 02:33:25 proprio-lpt dhcpcd[5650]: wlan0: dhcpcd 3.2.1 starting
Feb 4 02:33:25 proprio-lpt dhcpcd[5650]: wlan0: hardware address = 00:1b:77:2b:60:fd
Feb 4 02:33:25 proprio-lpt dhcpcd[5650]: wlan0: DUID = 00:01:00:01:0e:c2:e8:ea:00:16:d4:dd:e0:15
Feb 4 02:33:25 proprio-lpt dhcpcd[5650]: wlan0: broadcasting for a lease
Feb 4 02:33:27 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 02:33:27 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:33:27 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 02:33:27 proprio-lpt wlan0: RX authentication from 00:1d:a2:c7:f9:70 (alg=0 transaction=2 status=0)
Feb 4 02:33:27 proprio-lpt wlan0: authenticated
Feb 4 02:33:27 proprio-lpt wlan0: associate with AP 00:1d:a2:c7:f9:70
Feb 4 02:33:27 proprio-lpt wlan0: RX AssocResp from 00:1d:a2:c7:f9:70 (capab=0x421 status=0 aid=1)
Feb 4 02:33:27 proprio-lpt wlan0: associated
Feb 4 02:33:27 proprio-lpt wlan0: switched to short barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 02:33:27 proprio-lpt ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Feb 4 02:33:28 proprio-lpt dhcpcd[5650]: wlan0: offered 147.161.36.68 from 1.1.1.1
Feb 4 02:33:28 proprio-lpt dhcpcd[5650]: wlan0: checking 147.161.36.68 is available on attached networks
Feb 4 02:33:29 proprio-lpt dhcpcd[5650]: wlan0: leased 147.161.36.68 for 86400 seconds
Feb 4 02:33:29 proprio-lpt dhcpcd[5650]: wlan0: no renewal time supplied, assuming 43200 seconds
Feb 4 02:33:29 proprio-lpt dhcpcd[5650]: wlan0: no rebind time supplied, assuming 75600 seconds
Feb 4 02:33:29 proprio-lpt dhcpcd[5650]: wlan0: adding IP address 147.161.36.68/24
Feb 4 02:33:29 proprio-lpt dhcpcd[5650]: wlan0: adding default route via 147.161.36.10 metric 0
Feb 4 02:33:29 proprio-lpt dhcpcd[5650]: wlan0: exiting
Feb 4 02:33:37 proprio-lpt acpid: client connected from 5461[0:0]
Feb 4 02:33:37 proprio-lpt acpid: 1 client rule loaded
Feb 4 02:33:38 proprio-lpt wlan0: no IPv6 routers present
Feb 4 02:33:39 proprio-lpt acpid: received event "battery BAT1 00000081 00000001"
Feb 4 02:33:39 proprio-lpt acpid: notifying client 5086[104:1002]
Feb 4 02:33:39 proprio-lpt acpid: notifying client 5461[0:0]
Feb 4 02:33:39 proprio-lpt acpid: client has disconnected
Feb 4 02:33:39 proprio-lpt acpid: notifying client 5461[0:0]
Feb 4 02:33:39 proprio-lpt acpid: notifying client 5461[0:0]
Feb 4 02:33:39 proprio-lpt acpid: executing action "/etc/acpi/default.sh battery BAT1 00000081 00000001"
Feb 4 02:33:39 proprio-lpt logger: ACPI event unhandled: battery BAT1 00000081 00000001
Feb 4 02:33:39 proprio-lpt acpid: action exited with status 0
Feb 4 02:33:39 proprio-lpt acpid: completed event "battery BAT1 00000081 00000001"
Feb 4 02:33:52 proprio-lpt (proprio-5697): démarrage (version 2.20.1), pid 5697 utilisateur « proprio »
Feb 4 02:33:52 proprio-lpt (proprio-5697): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Feb 4 02:33:52 proprio-lpt (proprio-5697): Adresse « xml:readwrite:/home/proprio/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Feb 4 02:33:52 proprio-lpt (proprio-5697): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Feb 4 02:38:59 proprio-lpt su[5794]: Successful su for root by proprio
Feb 4 02:38:59 proprio-lpt su[5794]: + pts/3 proprio:root
Feb 4 02:38:59 proprio-lpt su[5794]: pam_unix(su:session): session opened for user root by (uid=1000)
Feb 4 02:39:52 proprio-lpt (proprio-5697): Le serveur GConf n'est pas en cours d'utilisation, arrêt.
Feb 4 02:39:52 proprio-lpt (proprio-5697): Sortie
Feb 4 02:42:46 proprio-lpt (proprio-5834): démarrage (version 2.20.1), pid 5834 utilisateur « proprio »
Feb 4 02:42:46 proprio-lpt (proprio-5834): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Feb 4 02:42:46 proprio-lpt (proprio-5834): Adresse « xml:readwrite:/home/proprio/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Feb 4 02:42:46 proprio-lpt (proprio-5834): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Feb 4 01:02:45 proprio-lpt -- MARK --
Feb 4 01:22:45 proprio-lpt -- MARK --
Feb 4 01:42:45 proprio-lpt -- MARK --
Feb 4 02:02:45 proprio-lpt -- MARK --
Feb 4 02:22:45 proprio-lpt -- MARK --
Feb 4 02:42:45 proprio-lpt -- MARK --
Feb 4 04:43:01 proprio-lpt wlan0: No ProbeResp from current AP 00:1d:a2:c7:f9:70 - assume out of range
Feb 4 13:52:35 proprio-lpt syslog-ng[5300]: syslog-ng starting up; version='2.0.8'
Feb 4 13:52:35 proprio-lpt Linux version 2.6.24-gentoo (root@proprio-lpt) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #21 SMP Mon Feb 4 02:23:21 IST 2008
Feb 4 13:52:35 proprio-lpt BIOS-provided physical RAM map:
Feb 4 13:52:35 proprio-lpt BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 0000000000100000 - 000000007fec0000 (usable)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 000000007fec0000 - 000000007fecf000 (ACPI NVS)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 000000007fecf000 - 0000000080000000 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 4 13:52:35 proprio-lpt BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Feb 4 13:52:35 proprio-lpt 1150MB HIGHMEM available.
Feb 4 13:52:35 proprio-lpt 896MB LOWMEM available.
Feb 4 13:52:35 proprio-lpt found SMP MP-table at 000f7bc0
Feb 4 13:52:35 proprio-lpt Entering add_active_range(0, 0, 523968) 0 entries of 256 used
Feb 4 13:52:35 proprio-lpt Zone PFN ranges:
Feb 4 13:52:35 proprio-lpt DMA 0 -> 4096
Feb 4 13:52:35 proprio-lpt Normal 4096 -> 229376
Feb 4 13:52:35 proprio-lpt HighMem 229376 -> 523968
Feb 4 13:52:35 proprio-lpt Movable zone start PFN for each node
Feb 4 13:52:35 proprio-lpt early_node_map[1] active PFN ranges
Feb 4 13:52:35 proprio-lpt 0: 0 -> 523968
Feb 4 13:52:35 proprio-lpt On node 0 totalpages: 523968
Feb 4 13:52:35 proprio-lpt DMA zone: 32 pages used for memmap
Feb 4 13:52:35 proprio-lpt DMA zone: 0 pages reserved
Feb 4 13:52:35 proprio-lpt DMA zone: 4064 pages, LIFO batch:0
Feb 4 13:52:35 proprio-lpt Normal zone: 1760 pages used for memmap
Feb 4 13:52:35 proprio-lpt Normal zone: 223520 pages, LIFO batch:31
Feb 4 13:52:35 proprio-lpt HighMem zone: 2301 pages used for memmap
Feb 4 13:52:35 proprio-lpt HighMem zone: 292291 pages, LIFO batch:31
Feb 4 13:52:35 proprio-lpt Movable zone: 0 pages used for memmap
Feb 4 13:52:35 proprio-lpt DMI present.
Feb 4 13:52:35 proprio-lpt Using APIC driver default
Feb 4 13:52:35 proprio-lpt ACPI: RSDP 000F7B40, 0024 (r2 Compal)
Feb 4 13:52:35 proprio-lpt ACPI: XSDT 7FEC47F2, 008C (r1 Compal CRESTLNE 6040000 LTP 0)
Feb 4 13:52:35 proprio-lpt ACPI: FACP 7FECBBD2, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
Feb 4 13:52:35 proprio-lpt ACPI: DSDT 7FEC5B9F, 5FBF (r2 Compal CRESTLNE 6040000 INTL 20061109)
Feb 4 13:52:35 proprio-lpt ACPI: FACS 7FECEFC0, 0040
Feb 4 13:52:35 proprio-lpt ACPI: APIC 7FECBCC6, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Feb 4 13:52:35 proprio-lpt ACPI: HPET 7FECBD2E, 0038 (r1 Compal CRESTLNE 6040000 LOHR 5A)
Feb 4 13:52:35 proprio-lpt ACPI: MCFG 7FECBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Feb 4 13:52:35 proprio-lpt ACPI: TCPA 7FECBDA2, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A)
Feb 4 13:52:35 proprio-lpt ACPI: TMOR 7FECBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
Feb 4 13:52:35 proprio-lpt ACPI: SLIC 7FECBDFA, 0176 (r1 Compal CRESTLNE 6040000 TBD 1)
Feb 4 13:52:35 proprio-lpt ACPI: APIC 7FECBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
Feb 4 13:52:35 proprio-lpt ACPI: BOOT 7FECBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Feb 4 13:52:35 proprio-lpt ACPI: SSDT 7FEC58DA, 02C5 (r1 SataRe SataAhci 1000 INTL 20050624)
Feb 4 13:52:35 proprio-lpt ACPI: SSDT 7FEC4E0A, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
Feb 4 13:52:35 proprio-lpt ACPI: SSDT 7FEC4D64, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
Feb 4 13:52:35 proprio-lpt ACPI: SSDT 7FEC487E, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
Feb 4 13:52:35 proprio-lpt ACPI: BIOS bug: multiple APIC/MADT found, using 0
Feb 4 13:52:35 proprio-lpt ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Feb 4 13:52:35 proprio-lpt ACPI: DMI detected: Compal
Feb 4 13:52:35 proprio-lpt ACPI: PM-Timer IO Port: 0x1008
Feb 4 13:52:35 proprio-lpt ACPI: Local APIC address 0xfee00000
Feb 4 13:52:35 proprio-lpt ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Feb 4 13:52:35 proprio-lpt Processor #0 6:15 APIC version 20
Feb 4 13:52:35 proprio-lpt ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Feb 4 13:52:35 proprio-lpt Processor #1 6:15 APIC version 20
Feb 4 13:52:35 proprio-lpt ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Feb 4 13:52:35 proprio-lpt ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Feb 4 13:52:35 proprio-lpt ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Feb 4 13:52:35 proprio-lpt IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Feb 4 13:52:35 proprio-lpt ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 4 13:52:35 proprio-lpt ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 4 13:52:35 proprio-lpt ACPI: IRQ0 used by override.
Feb 4 13:52:35 proprio-lpt ACPI: IRQ2 used by override.
Feb 4 13:52:35 proprio-lpt ACPI: IRQ9 used by override.
Feb 4 13:52:35 proprio-lpt Enabling APIC mode: Flat. Using 1 I/O APICs
Feb 4 13:52:35 proprio-lpt ACPI: HPET id: 0x8086a201 base: 0xfed00000
Feb 4 13:52:35 proprio-lpt Using ACPI (MADT) for SMP configuration information
Feb 4 13:52:35 proprio-lpt Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Feb 4 13:52:35 proprio-lpt swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000
Feb 4 13:52:35 proprio-lpt swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000
Feb 4 13:52:35 proprio-lpt swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
Feb 4 13:52:35 proprio-lpt swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
Feb 4 13:52:35 proprio-lpt swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
Feb 4 13:52:35 proprio-lpt swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Feb 4 13:52:35 proprio-lpt Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519875
Feb 4 13:52:35 proprio-lpt Kernel command line: root=/dev/sda5
Feb 4 13:52:35 proprio-lpt mapped APIC to ffffb000 (fee00000)
Feb 4 13:52:35 proprio-lpt mapped IOAPIC to ffffa000 (fec00000)
Feb 4 13:52:35 proprio-lpt Enabling fast FPU save and restore... done.
Feb 4 13:52:35 proprio-lpt Enabling unmasked SIMD FPU exception support... done.
Feb 4 13:52:35 proprio-lpt Initializing CPU#0
Feb 4 13:52:35 proprio-lpt PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb 4 13:52:35 proprio-lpt Detected 2194.559 MHz processor.
Feb 4 13:52:35 proprio-lpt Console: colour VGA+ 80x25
Feb 4 13:52:35 proprio-lpt console [tty0] enabled
Feb 4 13:52:35 proprio-lpt Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 4 13:52:35 proprio-lpt Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 4 13:52:35 proprio-lpt Memory: 2071036k/2095872k available (3482k kernel code, 23576k reserved, 1730k data, 248k init, 1178368k highmem)
Feb 4 13:52:35 proprio-lpt virtual kernel memory layout:
Feb 4 13:52:35 proprio-lpt fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
Feb 4 13:52:35 proprio-lpt pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 4 13:52:35 proprio-lpt vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Feb 4 13:52:35 proprio-lpt lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Feb 4 13:52:35 proprio-lpt .init : 0xc0620000 - 0xc065e000 ( 248 kB)
Feb 4 13:52:35 proprio-lpt .data : 0xc0466bec - 0xc06177ac (1730 kB)
Feb 4 13:52:35 proprio-lpt .text : 0xc0100000 - 0xc0466bec (3482 kB)
Feb 4 13:52:35 proprio-lpt Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb 4 13:52:35 proprio-lpt hpet clockevent registered
Feb 4 13:52:35 proprio-lpt Calibrating delay using timer specific routine.. 4393.16 BogoMIPS (lpj=8786321)
Feb 4 13:52:35 proprio-lpt Mount-cache hash table entries: 512
Feb 4 13:52:35 proprio-lpt CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
Feb 4 13:52:35 proprio-lpt monitor/mwait feature present.
Feb 4 13:52:35 proprio-lpt using mwait in idle threads.
Feb 4 13:52:35 proprio-lpt CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 4 13:52:35 proprio-lpt CPU: L2 cache: 4096K
Feb 4 13:52:35 proprio-lpt CPU: Physical Processor ID: 0
Feb 4 13:52:35 proprio-lpt CPU: Processor Core ID: 0
Feb 4 13:52:35 proprio-lpt CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Feb 4 13:52:35 proprio-lpt Intel machine check architecture supported.
Feb 4 13:52:35 proprio-lpt Intel machine check reporting enabled on CPU#0.
Feb 4 13:52:35 proprio-lpt Compat vDSO mapped to ffffe000.
Feb 4 13:52:35 proprio-lpt Checking 'hlt' instruction... OK.
Feb 4 13:52:35 proprio-lpt SMP alternatives: switching to UP code
Feb 4 13:52:35 proprio-lpt ACPI: Core revision 20070126
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [DSDT](id 0001) - 962 Objects with 69 Devices 175 Methods 27 Regions
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [SSDT](id 0002) - 15 Objects with 3 Devices 9 Methods 0 Regions
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions
Feb 4 13:52:35 proprio-lpt tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
Feb 4 13:52:35 proprio-lpt evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Feb 4 13:52:35 proprio-lpt CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Feb 4 13:52:35 proprio-lpt SMP alternatives: switching to SMP code
Feb 4 13:52:35 proprio-lpt Booting processor 1/1 eip 3000
Feb 4 13:52:35 proprio-lpt Initializing CPU#1
Feb 4 13:52:35 proprio-lpt Calibrating delay using timer specific routine.. 4389.16 BogoMIPS (lpj=8778338)
Feb 4 13:52:35 proprio-lpt CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
Feb 4 13:52:35 proprio-lpt monitor/mwait feature present.
Feb 4 13:52:35 proprio-lpt CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 4 13:52:35 proprio-lpt CPU: L2 cache: 4096K
Feb 4 13:52:35 proprio-lpt CPU: Physical Processor ID: 0
Feb 4 13:52:35 proprio-lpt CPU: Processor Core ID: 1
Feb 4 13:52:35 proprio-lpt CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Feb 4 13:52:35 proprio-lpt Intel machine check architecture supported.
Feb 4 13:52:35 proprio-lpt Intel machine check reporting enabled on CPU#1.
Feb 4 13:52:35 proprio-lpt CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Feb 4 13:52:35 proprio-lpt Total of 2 processors activated (8782.32 BogoMIPS).
Feb 4 13:52:35 proprio-lpt ENABLING IO-APIC IRQs
Feb 4 13:52:35 proprio-lpt ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 4 13:52:35 proprio-lpt checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Feb 4 13:52:35 proprio-lpt Brought up 2 CPUs
Feb 4 13:52:35 proprio-lpt CPU0 attaching sched-domain:
Feb 4 13:52:35 proprio-lpt domain 0: span 00000003
Feb 4 13:52:35 proprio-lpt groups: 00000001 00000002
Feb 4 13:52:35 proprio-lpt CPU1 attaching sched-domain:
Feb 4 13:52:35 proprio-lpt domain 0: span 00000003
Feb 4 13:52:35 proprio-lpt groups: 00000002 00000001
Feb 4 13:52:35 proprio-lpt net_namespace: 64 bytes
Feb 4 13:52:35 proprio-lpt NET: Registered protocol family 16
Feb 4 13:52:35 proprio-lpt ACPI: bus type pci registered
Feb 4 13:52:35 proprio-lpt PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Feb 4 13:52:35 proprio-lpt PCI: Not using MMCONFIG.
Feb 4 13:52:35 proprio-lpt PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
Feb 4 13:52:35 proprio-lpt PCI: Using configuration type 1
Feb 4 13:52:35 proprio-lpt Setting up standard PCI resources
Feb 4 13:52:35 proprio-lpt evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
Feb 4 13:52:35 proprio-lpt evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 10 Runtime GPEs in this block
Feb 4 13:52:35 proprio-lpt ACPI: EC: Look up EC in DSDT
Feb 4 13:52:35 proprio-lpt Completing Region/Field/Buffer/Package initialization:.............................................................
Feb 4 13:52:35 proprio-lpt Initialized 24/27 Regions 0/0 Fields 26/27 Buffers 11/13 Packages (1010 nodes)
Feb 4 13:52:35 proprio-lpt Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI
Feb 4 13:52:35 proprio-lpt ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
Feb 4 13:52:35 proprio-lpt .
Feb 4 13:52:35 proprio-lpt Executed 1 _INI methods requiring 0 _STA executions (examined 76 objects)
Feb 4 13:52:35 proprio-lpt ACPI: Interpreter enabled
Feb 4 13:52:35 proprio-lpt ACPI: (supports S0 S3 S4 S5)
Feb 4 13:52:35 proprio-lpt ACPI: Using IOAPIC for interrupt routing
Feb 4 13:52:35 proprio-lpt ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Feb 4 13:52:35 proprio-lpt ACPI: EC: driver started in poll mode
Feb 4 13:52:35 proprio-lpt ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 4 13:52:35 proprio-lpt PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Feb 4 13:52:35 proprio-lpt PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Feb 4 13:52:35 proprio-lpt PCI: Transparent bridge - 0000:00:1e.0
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 13:52:35 proprio-lpt Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 4 13:52:35 proprio-lpt pnp: PnP ACPI init
Feb 4 13:52:35 proprio-lpt ACPI: bus type pnp registered
Feb 4 13:52:35 proprio-lpt pnp: PnP ACPI: found 11 devices
Feb 4 13:52:35 proprio-lpt ACPI: ACPI bus type pnp unregistered
Feb 4 13:52:35 proprio-lpt SCSI subsystem initialized
Feb 4 13:52:35 proprio-lpt libata version 3.00 loaded.
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver usbfs
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver hub
Feb 4 13:52:35 proprio-lpt usbcore: registered new device driver usb
Feb 4 13:52:35 proprio-lpt PCI: Using ACPI for IRQ routing
Feb 4 13:52:35 proprio-lpt PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Feb 4 13:52:35 proprio-lpt ACPI: EC: non-query interrupt received, switching to interrupt mode
Feb 4 13:52:35 proprio-lpt Bluetooth: Core ver 2.11
Feb 4 13:52:35 proprio-lpt NET: Registered protocol family 31
Feb 4 13:52:35 proprio-lpt Bluetooth: HCI device and connection manager initialized
Feb 4 13:52:35 proprio-lpt Bluetooth: HCI socket layer initialized
Feb 4 13:52:35 proprio-lpt hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Feb 4 13:52:35 proprio-lpt hpet0: 3 64-bit timers, 14318180 Hz
Feb 4 13:52:35 proprio-lpt Time: tsc clocksource has been installed.
Feb 4 13:52:35 proprio-lpt Switched to high resolution mode on CPU 0
Feb 4 13:52:35 proprio-lpt Switched to high resolution mode on CPU 1
Feb 4 13:52:35 proprio-lpt system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Feb 4 13:52:35 proprio-lpt system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
Feb 4 13:52:35 proprio-lpt system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
Feb 4 13:52:35 proprio-lpt system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
Feb 4 13:52:35 proprio-lpt system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Feb 4 13:52:35 proprio-lpt system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
Feb 4 13:52:35 proprio-lpt system 00:01: iomem range 0x0-0x0 could not be reserved
Feb 4 13:52:35 proprio-lpt system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
Feb 4 13:52:35 proprio-lpt system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Feb 4 13:52:35 proprio-lpt system 00:06: ioport range 0x680-0x69f has been reserved
Feb 4 13:52:35 proprio-lpt system 00:06: ioport range 0x800-0x80f has been reserved
Feb 4 13:52:35 proprio-lpt system 00:06: ioport range 0x1000-0x107f has been reserved
Feb 4 13:52:35 proprio-lpt system 00:06: ioport range 0x1180-0x11bf has been reserved
Feb 4 13:52:35 proprio-lpt system 00:06: ioport range 0x1640-0x164f has been reserved
Feb 4 13:52:35 proprio-lpt system 00:06: ioport range 0xfe00-0xfe00 has been reserved
Feb 4 13:52:35 proprio-lpt system 00:06: ioport range 0xff00-0xff7f has been reserved
Feb 4 13:52:35 proprio-lpt PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
Feb 4 13:52:35 proprio-lpt PCI: Bridge: 0000:00:01.0
Feb 4 13:52:35 proprio-lpt IO window: 2000-2fff
Feb 4 13:52:35 proprio-lpt MEM window: c4000000-c6ffffff
Feb 4 13:52:35 proprio-lpt PREFETCH window: d0000000-dfffffff
Feb 4 13:52:35 proprio-lpt PCI: Bridge: 0000:00:1c.0
Feb 4 13:52:35 proprio-lpt IO window: 3000-3fff
Feb 4 13:52:35 proprio-lpt MEM window: bc000000-bfffffff
Feb 4 13:52:35 proprio-lpt PREFETCH window: cc000000-cdffffff
Feb 4 13:52:35 proprio-lpt PCI: Bridge: 0000:00:1c.1
Feb 4 13:52:35 proprio-lpt IO window: 4000-4fff
Feb 4 13:52:35 proprio-lpt MEM window: f0000000-f3ffffff
Feb 4 13:52:35 proprio-lpt PREFETCH window: fa000000-fbffffff
Feb 4 13:52:35 proprio-lpt PCI: Bridge: 0000:00:1c.2
Feb 4 13:52:35 proprio-lpt IO window: 5000-5fff
Feb 4 13:52:35 proprio-lpt MEM window: f4000000-f7ffffff
Feb 4 13:52:35 proprio-lpt PREFETCH window: fc000000-fdffffff
Feb 4 13:52:35 proprio-lpt PCI: Bridge: 0000:00:1c.3
Feb 4 13:52:35 proprio-lpt IO window: 6000-6fff
Feb 4 13:52:35 proprio-lpt MEM window: b4000000-b7ffffff
Feb 4 13:52:35 proprio-lpt PREFETCH window: c8000000-c9ffffff
Feb 4 13:52:35 proprio-lpt PCI: Bridge: 0000:00:1c.4
Feb 4 13:52:35 proprio-lpt IO window: 7000-7fff
Feb 4 13:52:35 proprio-lpt MEM window: f8100000-f81fffff
Feb 4 13:52:35 proprio-lpt PREFETCH window: 88000000-880fffff
Feb 4 13:52:35 proprio-lpt PCI: Bridge: 0000:00:1c.5
Feb 4 13:52:35 proprio-lpt IO window: disabled.
Feb 4 13:52:35 proprio-lpt MEM window: f8000000-f80fffff
Feb 4 13:52:35 proprio-lpt PREFETCH window: disabled.
Feb 4 13:52:35 proprio-lpt PCI: Bridge: 0000:00:1e.0
Feb 4 13:52:35 proprio-lpt IO window: disabled.
Feb 4 13:52:35 proprio-lpt MEM window: f8200000-f82fffff
Feb 4 13:52:35 proprio-lpt PREFETCH window: disabled.
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.0 to 64
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.1 to 64
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.2 to 64
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.3 to 64
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.4 to 64
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.5 to 64
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1e.0 to 64
Feb 4 13:52:35 proprio-lpt NET: Registered protocol family 2
Feb 4 13:52:35 proprio-lpt IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 4 13:52:35 proprio-lpt TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 4 13:52:35 proprio-lpt TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 4 13:52:35 proprio-lpt TCP: Hash tables configured (established 131072 bind 65536)
Feb 4 13:52:35 proprio-lpt TCP reno registered
Feb 4 13:52:35 proprio-lpt Simple Boot Flag at 0x38 set to 0x1
Feb 4 13:52:35 proprio-lpt Machine check exception polling timer started.
Feb 4 13:52:35 proprio-lpt IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Feb 4 13:52:35 proprio-lpt highmem bounce pool size: 64 pages
Feb 4 13:52:35 proprio-lpt Total HugeTLB memory allocated, 0
Feb 4 13:52:35 proprio-lpt Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Feb 4 13:52:35 proprio-lpt NTFS driver 2.1.29 [Flags: R/O].
Feb 4 13:52:35 proprio-lpt io scheduler noop registered
Feb 4 13:52:35 proprio-lpt io scheduler anticipatory registered (default)
Feb 4 13:52:35 proprio-lpt io scheduler deadline registered
Feb 4 13:52:35 proprio-lpt io scheduler cfq registered
Feb 4 13:52:35 proprio-lpt Boot video device is 0000:01:00.0
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 4 13:52:35 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:01.0:pcie00]
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:01.0:pcie02]
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.0 to 64
Feb 4 13:52:35 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.0:pcie00]
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.0:pcie02]
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.1 to 64
Feb 4 13:52:35 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.1:pcie00]
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.1:pcie02]
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.2 to 64
Feb 4 13:52:35 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.2:pcie00]
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.2:pcie02]
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.3 to 64
Feb 4 13:52:35 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.3:pcie00]
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.3:pcie02]
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.4 to 64
Feb 4 13:52:35 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.4:pcie00]
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.4:pcie02]
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.5 to 64
Feb 4 13:52:35 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.5:pcie00]
Feb 4 13:52:35 proprio-lpt Allocate Port Service[0000:00:1c.5:pcie02]
Feb 4 13:52:35 proprio-lpt Real Time Clock Driver v1.12ac
Feb 4 13:52:35 proprio-lpt hpet_resources: 0xfed00000 is busy
Feb 4 13:52:35 proprio-lpt Linux agpgart interface v0.102
Feb 4 13:52:35 proprio-lpt Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Feb 4 13:52:35 proprio-lpt Hangcheck: Using get_cycles().
Feb 4 13:52:35 proprio-lpt ACPI: AC Adapter [ACAD] (on-line)
Feb 4 13:52:35 proprio-lpt ACPI: Battery Slot [BAT1] (battery present)
Feb 4 13:52:35 proprio-lpt input: Power Button (FF) as /class/input/input0
Feb 4 13:52:35 proprio-lpt ACPI: Power Button (FF) [PWRF]
Feb 4 13:52:35 proprio-lpt input: Lid Switch as /class/input/input1
Feb 4 13:52:35 proprio-lpt ACPI: Lid Switch [LID0]
Feb 4 13:52:35 proprio-lpt input: Power Button (CM) as /class/input/input2
Feb 4 13:52:35 proprio-lpt ACPI: Power Button (CM) [PWRB]
Feb 4 13:52:35 proprio-lpt ACPI: SSDT 7FEC5598, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [SSDT](id 0098) - 6 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 13:52:35 proprio-lpt ACPI: SSDT 7FEC5069, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [SSDT](id 0099) - 1 Objects with 0 Devices 1 Methods 0 Regions
Feb 4 13:52:35 proprio-lpt Monitor-Mwait will be used to enter C-1 state
Feb 4 13:52:35 proprio-lpt Monitor-Mwait will be used to enter C-2 state
Feb 4 13:52:35 proprio-lpt Monitor-Mwait will be used to enter C-3 state
Feb 4 13:52:35 proprio-lpt ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Feb 4 13:52:35 proprio-lpt ACPI: Processor [CPU0] (supports 8 throttling states)
Feb 4 13:52:35 proprio-lpt ACPI: SSDT 7FEC5812, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [SSDT](id 00A0) - 4 Objects with 0 Devices 4 Methods 0 Regions
Feb 4 13:52:35 proprio-lpt ACPI: SSDT 7FEC5513, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Feb 4 13:52:35 proprio-lpt Parsing all Control Methods:
Feb 4 13:52:35 proprio-lpt Table [SSDT](id 00A1) - 1 Objects with 0 Devices 1 Methods 0 Regions
Feb 4 13:52:35 proprio-lpt ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Feb 4 13:52:35 proprio-lpt ACPI: Processor [CPU1] (supports 8 throttling states)
Feb 4 13:52:35 proprio-lpt isapnp: Scanning for PnP cards...
Feb 4 13:52:35 proprio-lpt isapnp: No Plug & Play device found
Feb 4 13:52:35 proprio-lpt Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Feb 4 13:52:35 proprio-lpt floppy0: no floppy controllers found
Feb 4 13:52:35 proprio-lpt RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Feb 4 13:52:35 proprio-lpt loop: module loaded
Feb 4 13:52:35 proprio-lpt Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Feb 4 13:52:35 proprio-lpt Copyright (c) 1999-2006 Intel Corporation.
Feb 4 13:52:35 proprio-lpt e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
Feb 4 13:52:35 proprio-lpt e1000e: Copyright (c) 1999-2007 Intel Corporation.
Feb 4 13:52:35 proprio-lpt ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.1.18
Feb 4 13:52:35 proprio-lpt ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Feb 4 13:52:35 proprio-lpt e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
Feb 4 13:52:35 proprio-lpt e100: Copyright(c) 1999-2006 Intel Corporation
Feb 4 13:52:35 proprio-lpt tg3.c:v3.86 (November 9, 2007)
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:04:00.0 to 64
Feb 4 13:52:35 proprio-lpt eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:dd:e0:15
Feb 4 13:52:35 proprio-lpt eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Feb 4 13:52:35 proprio-lpt eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Feb 4 13:52:35 proprio-lpt PPP generic driver version 2.4.2
Feb 4 13:52:35 proprio-lpt NET: Registered protocol family 24
Feb 4 13:52:35 proprio-lpt PPPoL2TP kernel driver, V1.0
Feb 4 13:52:35 proprio-lpt console [netcon0] enabled
Feb 4 13:52:35 proprio-lpt netconsole: network logging started
Feb 4 13:52:35 proprio-lpt Linux video capture interface: v2.00
Feb 4 13:52:35 proprio-lpt et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver et61x251
Feb 4 13:52:35 proprio-lpt zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver zc0301
Feb 4 13:52:35 proprio-lpt Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 4 13:52:35 proprio-lpt ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 4 13:52:35 proprio-lpt ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
Feb 4 13:52:35 proprio-lpt ICH8M: not 100% native mode: will probe irqs later
Feb 4 13:52:35 proprio-lpt ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
Feb 4 13:52:35 proprio-lpt ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:pio, hdd:pio
Feb 4 13:52:35 proprio-lpt Probing IDE interface ide0...
Feb 4 13:52:35 proprio-lpt hda: Slimtype DVDRW SSM-8515S, ATAPI CD/DVD-ROM drive
Feb 4 13:52:35 proprio-lpt hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Feb 4 13:52:35 proprio-lpt hda: UDMA/33 mode selected
Feb 4 13:52:35 proprio-lpt ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 4 13:52:35 proprio-lpt Probing IDE interface ide1...
Feb 4 13:52:35 proprio-lpt Probing IDE interface ide1...
Feb 4 13:52:35 proprio-lpt hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Feb 4 13:52:35 proprio-lpt Uniform CD-ROM driver Revision: 3.20
Feb 4 13:52:35 proprio-lpt Driver 'sd' needs updating - please use bus_type methods
Feb 4 13:52:35 proprio-lpt ahci 0000:00:1f.2: version 3.0
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Feb 4 13:52:35 proprio-lpt ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
Feb 4 13:52:35 proprio-lpt ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1f.2 to 64
Feb 4 13:52:35 proprio-lpt scsi0 : ahci
Feb 4 13:52:35 proprio-lpt scsi1 : ahci
Feb 4 13:52:35 proprio-lpt scsi2 : ahci
Feb 4 13:52:35 proprio-lpt ata1: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504100 irq 216
Feb 4 13:52:35 proprio-lpt ata2: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504180 irq 216
Feb 4 13:52:35 proprio-lpt ata3: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504200 irq 216
Feb 4 13:52:35 proprio-lpt ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 4 13:52:35 proprio-lpt ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
Feb 4 13:52:35 proprio-lpt ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
Feb 4 13:52:35 proprio-lpt ata1.00: configured for UDMA/133
Feb 4 13:52:35 proprio-lpt ata2: SATA link down (SStatus 0 SControl 300)
Feb 4 13:52:35 proprio-lpt ata3: SATA link down (SStatus 0 SControl 300)
Feb 4 13:52:35 proprio-lpt scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] Write Protect is off
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] Write Protect is off
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 4 13:52:35 proprio-lpt sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
Feb 4 13:52:35 proprio-lpt sd 0:0:0:0: [sda] Attached SCSI disk
Feb 4 13:52:35 proprio-lpt I2O subsystem v1.325
Feb 4 13:52:35 proprio-lpt i2o: max drivers = 8
Feb 4 13:52:35 proprio-lpt Fusion MPT base driver 3.04.06
Feb 4 13:52:35 proprio-lpt Copyright (c) 1999-2007 LSI Corporation
Feb 4 13:52:35 proprio-lpt Fusion MPT SPI Host driver 3.04.06
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:0e:06.0[A] -> GSI 22 (level, low) -> IRQ 20
Feb 4 13:52:35 proprio-lpt ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f8200000-f82007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Feb 4 13:52:35 proprio-lpt ieee1394: raw1394: /dev/raw1394 device initialized
Feb 4 13:52:35 proprio-lpt usbmon: debugfs is not available
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.7 to 64
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1a.7: EHCI Host Controller
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1a.7: debug port 1
Feb 4 13:52:35 proprio-lpt PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 4 13:52:35 proprio-lpt usb usb1: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt hub 1-0:1.0: USB hub found
Feb 4 13:52:35 proprio-lpt hub 1-0:1.0: 4 ports detected
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.7 to 64
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1d.7: EHCI Host Controller
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1d.7: debug port 1
Feb 4 13:52:35 proprio-lpt PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf8504c00
Feb 4 13:52:35 proprio-lpt ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 4 13:52:35 proprio-lpt usb usb2: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt hub 2-0:1.0: USB hub found
Feb 4 13:52:35 proprio-lpt hub 2-0:1.0: 6 ports detected
Feb 4 13:52:35 proprio-lpt ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Feb 4 13:52:35 proprio-lpt USB Universal Host Controller Interface driver v3.0
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.0 to 64
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1a.0: UHCI Host Controller
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
Feb 4 13:52:35 proprio-lpt usb usb3: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt hub 3-0:1.0: USB hub found
Feb 4 13:52:35 proprio-lpt hub 3-0:1.0: 2 ports detected
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.1 to 64
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1a.1: UHCI Host Controller
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1a.1: irq 22, io base 0x00001820
Feb 4 13:52:35 proprio-lpt usb usb4: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt hub 4-0:1.0: USB hub found
Feb 4 13:52:35 proprio-lpt hub 4-0:1.0: 2 ports detected
Feb 4 13:52:35 proprio-lpt usb 1-2: new high speed USB device using ehci_hcd and address 2
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.0 to 64
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001840
Feb 4 13:52:35 proprio-lpt usb usb5: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt hub 5-0:1.0: USB hub found
Feb 4 13:52:35 proprio-lpt hub 5-0:1.0: 2 ports detected
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.1 to 64
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
Feb 4 13:52:35 proprio-lpt usb usb6: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt hub 6-0:1.0: USB hub found
Feb 4 13:52:35 proprio-lpt hub 6-0:1.0: 2 ports detected
Feb 4 13:52:35 proprio-lpt usb 1-2: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.2 to 64
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Feb 4 13:52:35 proprio-lpt uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
Feb 4 13:52:35 proprio-lpt usb usb7: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt hub 7-0:1.0: USB hub found
Feb 4 13:52:35 proprio-lpt hub 7-0:1.0: 2 ports detected
Feb 4 13:52:35 proprio-lpt ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f75b2402bff]
Feb 4 13:52:35 proprio-lpt usb 4-1: new full speed USB device using uhci_hcd and address 2
Feb 4 13:52:35 proprio-lpt usb 4-1: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt usb 4-2: new full speed USB device using uhci_hcd and address 3
Feb 4 13:52:35 proprio-lpt usb 4-2: configuration #1 chosen from 1 choice
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver usblp
Feb 4 13:52:35 proprio-lpt Initializing USB Mass Storage driver...
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver usb-storage
Feb 4 13:52:35 proprio-lpt USB Mass Storage support registered.
Feb 4 13:52:35 proprio-lpt PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 4 13:52:35 proprio-lpt serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 4 13:52:35 proprio-lpt serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 4 13:52:35 proprio-lpt mice: PS/2 mouse device common for all mice
Feb 4 13:52:35 proprio-lpt input: AT Translated Set 2 keyboard as /class/input/input3
Feb 4 13:52:35 proprio-lpt i2c /dev entries driver
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
Feb 4 13:52:35 proprio-lpt input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
Feb 4 13:52:35 proprio-lpt Bluetooth: Virtual HCI driver ver 1.2
Feb 4 13:52:35 proprio-lpt Bluetooth: HCI UART driver ver 2.2
Feb 4 13:52:35 proprio-lpt Bluetooth: HCI H4 protocol initialized
Feb 4 13:52:35 proprio-lpt Bluetooth: HCI BCSP protocol initialized
Feb 4 13:52:35 proprio-lpt Bluetooth: HCILL protocol initialized
Feb 4 13:52:35 proprio-lpt Bluetooth: Broadcom Blutonium firmware driver ver 1.1
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver bcm203x
Feb 4 13:52:35 proprio-lpt Bluetooth: Digianswer Bluetooth USB driver ver 0.9
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver bpa10x
Feb 4 13:52:35 proprio-lpt Bluetooth: BlueFRITZ! USB driver ver 1.1
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver bfusb
Feb 4 13:52:35 proprio-lpt Bluetooth: Generic Bluetooth USB driver ver 0.1
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver btusb
Feb 4 13:52:35 proprio-lpt Bluetooth: Generic Bluetooth SDIO driver ver 0.1
Feb 4 13:52:35 proprio-lpt cpuidle: using governor ladder
Feb 4 13:52:35 proprio-lpt cpuidle: using governor menu
Feb 4 13:52:35 proprio-lpt sdhci: Secure Digital Host Controller Interface driver
Feb 4 13:52:35 proprio-lpt sdhci: Copyright(c) Pierre Ossman
Feb 4 13:52:35 proprio-lpt Marking TSC unstable due to: TSC halts in idle.
Feb 4 13:52:35 proprio-lpt sdhci: SDHCI controller found at 0000:0e:06.1 [1180:0822] (rev 22)
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:0e:06.1[B] -> GSI 23 (level, low) -> IRQ 21
Feb 4 13:52:35 proprio-lpt sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Feb 4 13:52:35 proprio-lpt mmc0: SDHCI at 0xf8200800 irq 21 DMA
Feb 4 13:52:35 proprio-lpt ricoh-mmc: Ricoh MMC Controller disabling driver
Feb 4 13:52:35 proprio-lpt ricoh-mmc: Copyright(c) Philip Langdale
Feb 4 13:52:35 proprio-lpt Time: hpet clocksource has been installed.
Feb 4 13:52:35 proprio-lpt ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
Feb 4 13:52:35 proprio-lpt ricoh-mmc: Controller is now disabled.
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver usbhid
Feb 4 13:52:35 proprio-lpt drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Feb 4 13:52:35 proprio-lpt TCP cubic registered
Feb 4 13:52:35 proprio-lpt NET: Registered protocol family 1
Feb 4 13:52:35 proprio-lpt NET: Registered protocol family 10
Feb 4 13:52:35 proprio-lpt IPv6 over IPv4 tunneling driver
Feb 4 13:52:35 proprio-lpt NET: Registered protocol family 17
Feb 4 13:52:35 proprio-lpt Bluetooth: L2CAP ver 2.9
Feb 4 13:52:35 proprio-lpt Bluetooth: L2CAP socket layer initialized
Feb 4 13:52:35 proprio-lpt Bluetooth: SCO (Voice Link) ver 0.5
Feb 4 13:52:35 proprio-lpt Bluetooth: SCO socket layer initialized
Feb 4 13:52:35 proprio-lpt Bluetooth: RFCOMM socket layer initialized
Feb 4 13:52:35 proprio-lpt Bluetooth: RFCOMM TTY layer initialized
Feb 4 13:52:35 proprio-lpt Bluetooth: RFCOMM ver 1.8
Feb 4 13:52:35 proprio-lpt Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Feb 4 13:52:35 proprio-lpt Bluetooth: BNEP filters: protocol multicast
Feb 4 13:52:35 proprio-lpt RPC: Registered udp transport module.
Feb 4 13:52:35 proprio-lpt RPC: Registered tcp transport module.
Feb 4 13:52:35 proprio-lpt Using IPI No-Shortcut mode
Feb 4 13:52:35 proprio-lpt EXT3-fs: INFO: recovery required on readonly filesystem.
Feb 4 13:52:35 proprio-lpt EXT3-fs: write access will be enabled during recovery.
Feb 4 13:52:35 proprio-lpt Clocksource tsc unstable (delta = -75225331 ns)
Feb 4 13:52:35 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 13:52:35 proprio-lpt EXT3-fs: sda5: orphan cleanup on readonly fs
Feb 4 13:52:35 proprio-lpt ext3_orphan_cleanup: deleting unreferenced inode 850734
Feb 4 13:52:35 proprio-lpt ext3_orphan_cleanup: deleting unreferenced inode 851067
Feb 4 13:52:35 proprio-lpt ext3_orphan_cleanup: deleting unreferenced inode 189850
Feb 4 13:52:35 proprio-lpt EXT3-fs: sda5: 3 orphan inodes deleted
Feb 4 13:52:35 proprio-lpt EXT3-fs: recovery complete.
Feb 4 13:52:35 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 13:52:35 proprio-lpt VFS: Mounted root (ext3 filesystem) readonly.
Feb 4 13:52:35 proprio-lpt Freeing unused kernel memory: 248k freed
Feb 4 13:52:35 proprio-lpt iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
Feb 4 13:52:35 proprio-lpt iwl3945: Copyright(c) 2003-2007 Intel Corporation
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:0c:00.0 to 64
Feb 4 13:52:35 proprio-lpt iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:00:1b.0 to 64
Feb 4 13:52:35 proprio-lpt uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
Feb 4 13:52:35 proprio-lpt usbcore: registered new interface driver uvcvideo
Feb 4 13:52:35 proprio-lpt USB Video Class driver (v0.1.0)
Feb 4 13:52:35 proprio-lpt iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Feb 4 13:52:35 proprio-lpt phy0: Selected rate control algorithm 'iwl-3945-rs'
Feb 4 13:52:35 proprio-lpt nvidia: module license 'NVIDIA' taints kernel.
Feb 4 13:52:35 proprio-lpt ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 13:52:35 proprio-lpt PCI: Setting latency timer of device 0000:01:00.0 to 64
Feb 4 13:52:35 proprio-lpt NVRM: loading NVIDIA UNIX x86 Kernel Module 169.09 Fri Jan 11 14:38:28 PST 2008
Feb 4 13:52:35 proprio-lpt EXT3 FS on sda5, internal journal
Feb 4 13:52:35 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 13:52:35 proprio-lpt EXT3 FS on sda6, internal journal
Feb 4 13:52:35 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 13:52:35 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 13:52:35 proprio-lpt EXT3 FS on sda2, internal journal
Feb 4 13:52:35 proprio-lpt EXT3-fs: recovery complete.
Feb 4 13:52:35 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 13:52:35 proprio-lpt fuse init (API version 7.8)
Feb 4 13:52:35 proprio-lpt fuse distribution version: 2.7.2
Feb 4 13:52:35 proprio-lpt Adding 1044184k swap on /dev/sda7. Priority:-1 extents:1 across:1044184k
Feb 4 13:52:35 proprio-lpt ADDRCONF(NETDEV_UP): eth0: link is not ready
Feb 4 13:52:35 proprio-lpt ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 4 13:52:35 proprio-lpt acpid: starting up
Feb 4 13:52:35 proprio-lpt acpid: 1 rule loaded
Feb 4 13:52:37 proprio-lpt acpid: client connected from 5428[104:1002]
Feb 4 13:52:37 proprio-lpt acpid: 1 client rule loaded
Feb 4 13:52:43 proprio-lpt acpid: client connected from 5778[0:0]
Feb 4 13:52:43 proprio-lpt acpid: 1 client rule loaded
Feb 4 13:52:48 proprio-lpt acpid: client connected from 5778[0:0]
Feb 4 13:52:48 proprio-lpt acpid: 1 client rule loaded
Feb 4 13:52:59 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:53:00 proprio-lpt kdm: :0[5847]: pam_unix(kde:session): session opened for user proprio by (uid=0)
Feb 4 13:53:16 proprio-lpt hcid[3193]: Default passkey agent (:1.7, /org/kde/kbluetooth_1234) registered
Feb 4 13:53:16 proprio-lpt hcid[3193]: Default authorization agent (:1.7, /org/kde/kbluetooth_auth_1234) registered
Feb 4 13:53:21 proprio-lpt su[5991]: Successful su for root by proprio
Feb 4 13:53:21 proprio-lpt su[5991]: + pts/4 proprio:root
Feb 4 13:53:21 proprio-lpt su[5991]: pam_unix(su:session): session opened for user root by (uid=1000)
Feb 4 13:53:30 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:53:36 proprio-lpt acpid: received event "battery BAT1 00000081 00000001"
Feb 4 13:53:36 proprio-lpt acpid: notifying client 5428[104:1002]
Feb 4 13:53:36 proprio-lpt acpid: notifying client 5778[0:0]
Feb 4 13:53:36 proprio-lpt acpid: notifying client 5778[0:0]
Feb 4 13:53:36 proprio-lpt acpid: executing action "/etc/acpi/default.sh battery BAT1 00000081 00000001"
Feb 4 13:53:36 proprio-lpt logger: ACPI event unhandled: battery BAT1 00000081 00000001
Feb 4 13:53:36 proprio-lpt acpid: action exited with status 0
Feb 4 13:53:36 proprio-lpt acpid: completed event "battery BAT1 00000081 00000001"
Feb 4 13:53:40 proprio-lpt ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 4 13:53:40 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 13:53:40 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 13:53:40 proprio-lpt wlan0: RX authentication from 00:1d:a2:c7:f9:70 (alg=0 transaction=2 status=0)
Feb 4 13:53:40 proprio-lpt wlan0: authenticated
Feb 4 13:53:40 proprio-lpt wlan0: associate with AP 00:1d:a2:c7:f9:70
Feb 4 13:53:40 proprio-lpt dhcpcd[6032]: wlan0: dhcpcd 3.2.1 starting
Feb 4 13:53:40 proprio-lpt dhcpcd[6032]: wlan0: hardware address = 00:1b:77:2b:60:fd
Feb 4 13:53:40 proprio-lpt dhcpcd[6032]: wlan0: DUID = 00:01:00:01:0e:c2:e8:ea:00:16:d4:dd:e0:15
Feb 4 13:53:40 proprio-lpt wlan0: RX AssocResp from 00:1d:a2:c7:f9:70 (capab=0x421 status=0 aid=4)
Feb 4 13:53:40 proprio-lpt wlan0: associated
Feb 4 13:53:40 proprio-lpt wlan0: switched to short barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 13:53:40 proprio-lpt ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Feb 4 13:53:40 proprio-lpt dhcpcd[6032]: wlan0: broadcasting for a lease
Feb 4 13:53:43 proprio-lpt dhcpcd[6032]: wlan0: offered 147.161.36.68 from 1.1.1.1
Feb 4 13:53:43 proprio-lpt dhcpcd[6032]: wlan0: checking 147.161.36.68 is available on attached networks
Feb 4 13:53:44 proprio-lpt dhcpcd[6032]: wlan0: leased 147.161.36.68 for 86400 seconds
Feb 4 13:53:44 proprio-lpt dhcpcd[6032]: wlan0: no renewal time supplied, assuming 43200 seconds
Feb 4 13:53:44 proprio-lpt dhcpcd[6032]: wlan0: no rebind time supplied, assuming 75600 seconds
Feb 4 13:53:44 proprio-lpt dhcpcd[6032]: wlan0: adding IP address 147.161.36.68/24
Feb 4 13:53:44 proprio-lpt dhcpcd[6032]: wlan0: adding default route via 147.161.36.10 metric 0
Feb 4 13:53:44 proprio-lpt dhcpcd[6032]: wlan0: exiting
Feb 4 13:53:51 proprio-lpt wlan0: no IPv6 routers present
Feb 4 13:54:00 proprio-lpt su[5991]: pam_unix(su:session): session closed for user root
Feb 4 13:54:01 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:54:14 proprio-lpt (proprio-6057): démarrage (version 2.20.1), pid 6057 utilisateur « proprio »
Feb 4 13:54:14 proprio-lpt (proprio-6057): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Feb 4 13:54:14 proprio-lpt (proprio-6057): Adresse « xml:readwrite:/home/proprio/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Feb 4 13:54:14 proprio-lpt (proprio-6057): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Feb 4 13:54:32 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:55:03 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:55:34 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:56:05 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:56:36 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:57:00 proprio-lpt su[6092]: pam_unix(su:auth): authentication failure; logname= uid=1000 euid=0 tty=pts/4 ruser=proprio rhost= user=root
Feb 4 13:57:02 proprio-lpt su[6092]: pam_authenticate: Échec d'authentification
Feb 4 13:57:02 proprio-lpt su[6092]: FAILED su for root by proprio
Feb 4 13:57:02 proprio-lpt su[6092]: - pts/4 proprio:root
Feb 4 13:57:06 proprio-lpt su[6093]: Successful su for root by proprio
Feb 4 13:57:06 proprio-lpt su[6093]: + pts/4 proprio:root
Feb 4 13:57:06 proprio-lpt su[6093]: pam_unix(su:session): session opened for user root by (uid=1000)
Feb 4 13:57:07 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:57:38 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:58:09 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:58:40 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:58:58 proprio-lpt rc-scripts: emerge --sync failed
Feb 4 13:59:11 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 13:59:42 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:00:13 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:00:45 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:01:16 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:01:47 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:01:54 proprio-lpt rc-scripts: emerge --sync failed
Feb 4 14:02:18 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:02:49 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:03:20 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:03:51 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:04:22 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:04:53 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:05:24 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:05:55 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:06:26 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:06:57 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:07:28 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:07:59 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:08:30 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:09:01 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:09:32 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:09:58 proprio-lpt wlan0: switched to long barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:09:58 proprio-lpt wlan0: switched to short barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:10:03 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:10:34 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:11:06 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:11:37 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:12:08 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:12:39 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:13:10 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:13:41 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:14:12 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:14:43 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:15:14 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:15:45 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:16:16 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:16:47 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:17:18 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:17:49 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:18:20 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:18:51 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:19:22 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:19:53 proprio-lpt dhcpcd[4040]: eth0: adding IP address 169.254.24.76/16
Feb 4 14:22:13 proprio-lpt syslog-ng[4799]: syslog-ng starting up; version='2.0.8'
Feb 4 14:22:13 proprio-lpt Linux version 2.6.24-gentoo (root@proprio-lpt) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #21 SMP Mon Feb 4 02:23:21 IST 2008
Feb 4 14:22:13 proprio-lpt BIOS-provided physical RAM map:
Feb 4 14:22:13 proprio-lpt BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 0000000000100000 - 000000007fec0000 (usable)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 000000007fec0000 - 000000007fecf000 (ACPI NVS)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 000000007fecf000 - 0000000080000000 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 4 14:22:13 proprio-lpt BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Feb 4 14:22:13 proprio-lpt 1150MB HIGHMEM available.
Feb 4 14:22:13 proprio-lpt 896MB LOWMEM available.
Feb 4 14:22:13 proprio-lpt found SMP MP-table at 000f7bc0
Feb 4 14:22:13 proprio-lpt Entering add_active_range(0, 0, 523968) 0 entries of 256 used
Feb 4 14:22:13 proprio-lpt Zone PFN ranges:
Feb 4 14:22:13 proprio-lpt DMA 0 -> 4096
Feb 4 14:22:13 proprio-lpt Normal 4096 -> 229376
Feb 4 14:22:13 proprio-lpt HighMem 229376 -> 523968
Feb 4 14:22:13 proprio-lpt Movable zone start PFN for each node
Feb 4 14:22:13 proprio-lpt early_node_map[1] active PFN ranges
Feb 4 14:22:13 proprio-lpt 0: 0 -> 523968
Feb 4 14:22:13 proprio-lpt On node 0 totalpages: 523968
Feb 4 14:22:13 proprio-lpt DMA zone: 32 pages used for memmap
Feb 4 14:22:13 proprio-lpt DMA zone: 0 pages reserved
Feb 4 14:22:13 proprio-lpt DMA zone: 4064 pages, LIFO batch:0
Feb 4 14:22:13 proprio-lpt Normal zone: 1760 pages used for memmap
Feb 4 14:22:13 proprio-lpt Normal zone: 223520 pages, LIFO batch:31
Feb 4 14:22:13 proprio-lpt HighMem zone: 2301 pages used for memmap
Feb 4 14:22:13 proprio-lpt HighMem zone: 292291 pages, LIFO batch:31
Feb 4 14:22:13 proprio-lpt Movable zone: 0 pages used for memmap
Feb 4 14:22:13 proprio-lpt DMI present.
Feb 4 14:22:13 proprio-lpt Using APIC driver default
Feb 4 14:22:13 proprio-lpt ACPI: RSDP 000F7B40, 0024 (r2 Compal)
Feb 4 14:22:13 proprio-lpt ACPI: XSDT 7FEC47F2, 008C (r1 Compal CRESTLNE 6040000 LTP 0)
Feb 4 14:22:13 proprio-lpt ACPI: FACP 7FECBBD2, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
Feb 4 14:22:13 proprio-lpt ACPI: DSDT 7FEC5B9F, 5FBF (r2 Compal CRESTLNE 6040000 INTL 20061109)
Feb 4 14:22:13 proprio-lpt ACPI: FACS 7FECEFC0, 0040
Feb 4 14:22:13 proprio-lpt ACPI: APIC 7FECBCC6, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Feb 4 14:22:13 proprio-lpt ACPI: HPET 7FECBD2E, 0038 (r1 Compal CRESTLNE 6040000 LOHR 5A)
Feb 4 14:22:13 proprio-lpt ACPI: MCFG 7FECBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Feb 4 14:22:13 proprio-lpt ACPI: TCPA 7FECBDA2, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A)
Feb 4 14:22:13 proprio-lpt ACPI: TMOR 7FECBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
Feb 4 14:22:13 proprio-lpt ACPI: SLIC 7FECBDFA, 0176 (r1 Compal CRESTLNE 6040000 TBD 1)
Feb 4 14:22:13 proprio-lpt ACPI: APIC 7FECBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
Feb 4 14:22:13 proprio-lpt ACPI: BOOT 7FECBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Feb 4 14:22:13 proprio-lpt ACPI: SSDT 7FEC58DA, 02C5 (r1 SataRe SataAhci 1000 INTL 20050624)
Feb 4 14:22:13 proprio-lpt ACPI: SSDT 7FEC4E0A, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
Feb 4 14:22:13 proprio-lpt ACPI: SSDT 7FEC4D64, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
Feb 4 14:22:13 proprio-lpt ACPI: SSDT 7FEC487E, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
Feb 4 14:22:13 proprio-lpt ACPI: BIOS bug: multiple APIC/MADT found, using 0
Feb 4 14:22:13 proprio-lpt ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Feb 4 14:22:13 proprio-lpt ACPI: DMI detected: Compal
Feb 4 14:22:13 proprio-lpt ACPI: PM-Timer IO Port: 0x1008
Feb 4 14:22:13 proprio-lpt ACPI: Local APIC address 0xfee00000
Feb 4 14:22:13 proprio-lpt ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Feb 4 14:22:13 proprio-lpt Processor #0 6:15 APIC version 20
Feb 4 14:22:13 proprio-lpt ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Feb 4 14:22:13 proprio-lpt Processor #1 6:15 APIC version 20
Feb 4 14:22:13 proprio-lpt ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Feb 4 14:22:13 proprio-lpt ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Feb 4 14:22:13 proprio-lpt ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Feb 4 14:22:13 proprio-lpt IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Feb 4 14:22:13 proprio-lpt ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 4 14:22:13 proprio-lpt ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 4 14:22:13 proprio-lpt ACPI: IRQ0 used by override.
Feb 4 14:22:13 proprio-lpt ACPI: IRQ2 used by override.
Feb 4 14:22:13 proprio-lpt ACPI: IRQ9 used by override.
Feb 4 14:22:13 proprio-lpt Enabling APIC mode: Flat. Using 1 I/O APICs
Feb 4 14:22:13 proprio-lpt ACPI: HPET id: 0x8086a201 base: 0xfed00000
Feb 4 14:22:13 proprio-lpt Using ACPI (MADT) for SMP configuration information
Feb 4 14:22:13 proprio-lpt Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Feb 4 14:22:13 proprio-lpt swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000
Feb 4 14:22:13 proprio-lpt swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000
Feb 4 14:22:13 proprio-lpt swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
Feb 4 14:22:13 proprio-lpt swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
Feb 4 14:22:13 proprio-lpt swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
Feb 4 14:22:13 proprio-lpt swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Feb 4 14:22:13 proprio-lpt Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519875
Feb 4 14:22:13 proprio-lpt Kernel command line: root=/dev/sda5
Feb 4 14:22:13 proprio-lpt mapped APIC to ffffb000 (fee00000)
Feb 4 14:22:13 proprio-lpt mapped IOAPIC to ffffa000 (fec00000)
Feb 4 14:22:13 proprio-lpt Enabling fast FPU save and restore... done.
Feb 4 14:22:13 proprio-lpt Enabling unmasked SIMD FPU exception support... done.
Feb 4 14:22:13 proprio-lpt Initializing CPU#0
Feb 4 14:22:13 proprio-lpt PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb 4 14:22:13 proprio-lpt Detected 2194.634 MHz processor.
Feb 4 14:22:13 proprio-lpt Console: colour VGA+ 80x25
Feb 4 14:22:13 proprio-lpt console [tty0] enabled
Feb 4 14:22:13 proprio-lpt Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 4 14:22:13 proprio-lpt Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 4 14:22:13 proprio-lpt Memory: 2071036k/2095872k available (3482k kernel code, 23576k reserved, 1730k data, 248k init, 1178368k highmem)
Feb 4 14:22:13 proprio-lpt virtual kernel memory layout:
Feb 4 14:22:13 proprio-lpt fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
Feb 4 14:22:13 proprio-lpt pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 4 14:22:13 proprio-lpt vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Feb 4 14:22:13 proprio-lpt lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Feb 4 14:22:13 proprio-lpt .init : 0xc0620000 - 0xc065e000 ( 248 kB)
Feb 4 14:22:13 proprio-lpt .data : 0xc0466bec - 0xc06177ac (1730 kB)
Feb 4 14:22:13 proprio-lpt .text : 0xc0100000 - 0xc0466bec (3482 kB)
Feb 4 14:22:13 proprio-lpt Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb 4 14:22:13 proprio-lpt hpet clockevent registered
Feb 4 14:22:13 proprio-lpt Calibrating delay using timer specific routine.. 4393.46 BogoMIPS (lpj=8786921)
Feb 4 14:22:13 proprio-lpt Mount-cache hash table entries: 512
Feb 4 14:22:13 proprio-lpt CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
Feb 4 14:22:13 proprio-lpt monitor/mwait feature present.
Feb 4 14:22:13 proprio-lpt using mwait in idle threads.
Feb 4 14:22:13 proprio-lpt CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 4 14:22:13 proprio-lpt CPU: L2 cache: 4096K
Feb 4 14:22:13 proprio-lpt CPU: Physical Processor ID: 0
Feb 4 14:22:13 proprio-lpt CPU: Processor Core ID: 0
Feb 4 14:22:13 proprio-lpt CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Feb 4 14:22:13 proprio-lpt Intel machine check architecture supported.
Feb 4 14:22:13 proprio-lpt Intel machine check reporting enabled on CPU#0.
Feb 4 14:22:13 proprio-lpt Compat vDSO mapped to ffffe000.
Feb 4 14:22:13 proprio-lpt Checking 'hlt' instruction... OK.
Feb 4 14:22:13 proprio-lpt SMP alternatives: switching to UP code
Feb 4 14:22:13 proprio-lpt ACPI: Core revision 20070126
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [DSDT](id 0001) - 962 Objects with 69 Devices 175 Methods 27 Regions
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [SSDT](id 0002) - 15 Objects with 3 Devices 9 Methods 0 Regions
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions
Feb 4 14:22:13 proprio-lpt tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
Feb 4 14:22:13 proprio-lpt evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Feb 4 14:22:13 proprio-lpt CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Feb 4 14:22:13 proprio-lpt SMP alternatives: switching to SMP code
Feb 4 14:22:13 proprio-lpt Booting processor 1/1 eip 3000
Feb 4 14:22:13 proprio-lpt Initializing CPU#1
Feb 4 14:22:13 proprio-lpt Calibrating delay using timer specific routine.. 4388.91 BogoMIPS (lpj=8777820)
Feb 4 14:22:13 proprio-lpt CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
Feb 4 14:22:13 proprio-lpt monitor/mwait feature present.
Feb 4 14:22:13 proprio-lpt CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 4 14:22:13 proprio-lpt CPU: L2 cache: 4096K
Feb 4 14:22:13 proprio-lpt CPU: Physical Processor ID: 0
Feb 4 14:22:13 proprio-lpt CPU: Processor Core ID: 1
Feb 4 14:22:13 proprio-lpt CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Feb 4 14:22:13 proprio-lpt Intel machine check architecture supported.
Feb 4 14:22:13 proprio-lpt Intel machine check reporting enabled on CPU#1.
Feb 4 14:22:13 proprio-lpt CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Feb 4 14:22:13 proprio-lpt Total of 2 processors activated (8782.37 BogoMIPS).
Feb 4 14:22:13 proprio-lpt ENABLING IO-APIC IRQs
Feb 4 14:22:13 proprio-lpt ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 4 14:22:13 proprio-lpt checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Feb 4 14:22:13 proprio-lpt Brought up 2 CPUs
Feb 4 14:22:13 proprio-lpt CPU0 attaching sched-domain:
Feb 4 14:22:13 proprio-lpt domain 0: span 00000003
Feb 4 14:22:13 proprio-lpt groups: 00000001 00000002
Feb 4 14:22:13 proprio-lpt CPU1 attaching sched-domain:
Feb 4 14:22:13 proprio-lpt domain 0: span 00000003
Feb 4 14:22:13 proprio-lpt groups: 00000002 00000001
Feb 4 14:22:13 proprio-lpt net_namespace: 64 bytes
Feb 4 14:22:13 proprio-lpt NET: Registered protocol family 16
Feb 4 14:22:13 proprio-lpt ACPI: bus type pci registered
Feb 4 14:22:13 proprio-lpt PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Feb 4 14:22:13 proprio-lpt PCI: Not using MMCONFIG.
Feb 4 14:22:13 proprio-lpt PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
Feb 4 14:22:13 proprio-lpt PCI: Using configuration type 1
Feb 4 14:22:13 proprio-lpt Setting up standard PCI resources
Feb 4 14:22:13 proprio-lpt evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
Feb 4 14:22:13 proprio-lpt evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 10 Runtime GPEs in this block
Feb 4 14:22:13 proprio-lpt ACPI: EC: Look up EC in DSDT
Feb 4 14:22:13 proprio-lpt Completing Region/Field/Buffer/Package initialization:..........................................................
Feb 4 14:22:13 proprio-lpt Initialized 21/27 Regions 0/0 Fields 26/27 Buffers 11/13 Packages (1010 nodes)
Feb 4 14:22:13 proprio-lpt Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI
Feb 4 14:22:13 proprio-lpt ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
Feb 4 14:22:13 proprio-lpt .
Feb 4 14:22:13 proprio-lpt Executed 1 _INI methods requiring 0 _STA executions (examined 76 objects)
Feb 4 14:22:13 proprio-lpt ACPI: Interpreter enabled
Feb 4 14:22:13 proprio-lpt ACPI: (supports S0 S3 S4 S5)
Feb 4 14:22:13 proprio-lpt ACPI: Using IOAPIC for interrupt routing
Feb 4 14:22:13 proprio-lpt ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Feb 4 14:22:13 proprio-lpt ACPI: EC: driver started in poll mode
Feb 4 14:22:13 proprio-lpt ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 4 14:22:13 proprio-lpt PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Feb 4 14:22:13 proprio-lpt PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Feb 4 14:22:13 proprio-lpt PCI: Transparent bridge - 0000:00:1e.0
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 4 14:22:13 proprio-lpt Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 4 14:22:13 proprio-lpt pnp: PnP ACPI init
Feb 4 14:22:13 proprio-lpt ACPI: bus type pnp registered
Feb 4 14:22:13 proprio-lpt pnp: PnP ACPI: found 11 devices
Feb 4 14:22:13 proprio-lpt ACPI: ACPI bus type pnp unregistered
Feb 4 14:22:13 proprio-lpt SCSI subsystem initialized
Feb 4 14:22:13 proprio-lpt libata version 3.00 loaded.
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver usbfs
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver hub
Feb 4 14:22:13 proprio-lpt usbcore: registered new device driver usb
Feb 4 14:22:13 proprio-lpt PCI: Using ACPI for IRQ routing
Feb 4 14:22:13 proprio-lpt PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Feb 4 14:22:13 proprio-lpt Bluetooth: Core ver 2.11
Feb 4 14:22:13 proprio-lpt NET: Registered protocol family 31
Feb 4 14:22:13 proprio-lpt Bluetooth: HCI device and connection manager initialized
Feb 4 14:22:13 proprio-lpt Bluetooth: HCI socket layer initialized
Feb 4 14:22:13 proprio-lpt hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Feb 4 14:22:13 proprio-lpt hpet0: 3 64-bit timers, 14318180 Hz
Feb 4 14:22:13 proprio-lpt Time: tsc clocksource has been installed.
Feb 4 14:22:13 proprio-lpt Switched to high resolution mode on CPU 0
Feb 4 14:22:13 proprio-lpt Switched to high resolution mode on CPU 1
Feb 4 14:22:13 proprio-lpt system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Feb 4 14:22:13 proprio-lpt system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
Feb 4 14:22:13 proprio-lpt system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
Feb 4 14:22:13 proprio-lpt system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
Feb 4 14:22:13 proprio-lpt system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Feb 4 14:22:13 proprio-lpt system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
Feb 4 14:22:13 proprio-lpt system 00:01: iomem range 0x0-0x0 could not be reserved
Feb 4 14:22:13 proprio-lpt system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
Feb 4 14:22:13 proprio-lpt system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Feb 4 14:22:13 proprio-lpt system 00:06: ioport range 0x680-0x69f has been reserved
Feb 4 14:22:13 proprio-lpt system 00:06: ioport range 0x800-0x80f has been reserved
Feb 4 14:22:13 proprio-lpt system 00:06: ioport range 0x1000-0x107f has been reserved
Feb 4 14:22:13 proprio-lpt system 00:06: ioport range 0x1180-0x11bf has been reserved
Feb 4 14:22:13 proprio-lpt system 00:06: ioport range 0x1640-0x164f has been reserved
Feb 4 14:22:13 proprio-lpt system 00:06: ioport range 0xfe00-0xfe00 has been reserved
Feb 4 14:22:13 proprio-lpt system 00:06: ioport range 0xff00-0xff7f has been reserved
Feb 4 14:22:13 proprio-lpt PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
Feb 4 14:22:13 proprio-lpt PCI: Bridge: 0000:00:01.0
Feb 4 14:22:13 proprio-lpt IO window: 2000-2fff
Feb 4 14:22:13 proprio-lpt MEM window: c4000000-c6ffffff
Feb 4 14:22:13 proprio-lpt PREFETCH window: d0000000-dfffffff
Feb 4 14:22:13 proprio-lpt PCI: Bridge: 0000:00:1c.0
Feb 4 14:22:13 proprio-lpt IO window: 3000-3fff
Feb 4 14:22:13 proprio-lpt MEM window: bc000000-bfffffff
Feb 4 14:22:13 proprio-lpt PREFETCH window: cc000000-cdffffff
Feb 4 14:22:13 proprio-lpt PCI: Bridge: 0000:00:1c.1
Feb 4 14:22:13 proprio-lpt IO window: 4000-4fff
Feb 4 14:22:13 proprio-lpt MEM window: f0000000-f3ffffff
Feb 4 14:22:13 proprio-lpt PREFETCH window: fa000000-fbffffff
Feb 4 14:22:13 proprio-lpt PCI: Bridge: 0000:00:1c.2
Feb 4 14:22:13 proprio-lpt IO window: 5000-5fff
Feb 4 14:22:13 proprio-lpt MEM window: f4000000-f7ffffff
Feb 4 14:22:13 proprio-lpt PREFETCH window: fc000000-fdffffff
Feb 4 14:22:13 proprio-lpt PCI: Bridge: 0000:00:1c.3
Feb 4 14:22:13 proprio-lpt IO window: 6000-6fff
Feb 4 14:22:13 proprio-lpt MEM window: b4000000-b7ffffff
Feb 4 14:22:13 proprio-lpt PREFETCH window: c8000000-c9ffffff
Feb 4 14:22:13 proprio-lpt PCI: Bridge: 0000:00:1c.4
Feb 4 14:22:13 proprio-lpt IO window: 7000-7fff
Feb 4 14:22:13 proprio-lpt MEM window: f8100000-f81fffff
Feb 4 14:22:13 proprio-lpt PREFETCH window: 88000000-880fffff
Feb 4 14:22:13 proprio-lpt PCI: Bridge: 0000:00:1c.5
Feb 4 14:22:13 proprio-lpt IO window: disabled.
Feb 4 14:22:13 proprio-lpt MEM window: f8000000-f80fffff
Feb 4 14:22:13 proprio-lpt PREFETCH window: disabled.
Feb 4 14:22:13 proprio-lpt PCI: Bridge: 0000:00:1e.0
Feb 4 14:22:13 proprio-lpt IO window: disabled.
Feb 4 14:22:13 proprio-lpt MEM window: f8200000-f82fffff
Feb 4 14:22:13 proprio-lpt PREFETCH window: disabled.
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.0 to 64
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.1 to 64
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.2 to 64
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.3 to 64
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.4 to 64
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.5 to 64
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1e.0 to 64
Feb 4 14:22:13 proprio-lpt NET: Registered protocol family 2
Feb 4 14:22:13 proprio-lpt IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 4 14:22:13 proprio-lpt TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 4 14:22:13 proprio-lpt TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 4 14:22:13 proprio-lpt TCP: Hash tables configured (established 131072 bind 65536)
Feb 4 14:22:13 proprio-lpt TCP reno registered
Feb 4 14:22:13 proprio-lpt Simple Boot Flag at 0x38 set to 0x1
Feb 4 14:22:13 proprio-lpt Machine check exception polling timer started.
Feb 4 14:22:13 proprio-lpt IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Feb 4 14:22:13 proprio-lpt highmem bounce pool size: 64 pages
Feb 4 14:22:13 proprio-lpt Total HugeTLB memory allocated, 0
Feb 4 14:22:13 proprio-lpt Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Feb 4 14:22:13 proprio-lpt NTFS driver 2.1.29 [Flags: R/O].
Feb 4 14:22:13 proprio-lpt io scheduler noop registered
Feb 4 14:22:13 proprio-lpt io scheduler anticipatory registered (default)
Feb 4 14:22:13 proprio-lpt io scheduler deadline registered
Feb 4 14:22:13 proprio-lpt io scheduler cfq registered
Feb 4 14:22:13 proprio-lpt Boot video device is 0000:01:00.0
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 4 14:22:13 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:01.0:pcie00]
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:01.0:pcie02]
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.0 to 64
Feb 4 14:22:13 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.0:pcie00]
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.0:pcie02]
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.1 to 64
Feb 4 14:22:13 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.1:pcie00]
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.1:pcie02]
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.2 to 64
Feb 4 14:22:13 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.2:pcie00]
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.2:pcie02]
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.3 to 64
Feb 4 14:22:13 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.3:pcie00]
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.3:pcie02]
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.4 to 64
Feb 4 14:22:13 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.4:pcie00]
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.4:pcie02]
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1c.5 to 64
Feb 4 14:22:13 proprio-lpt assign_interrupt_mode Found MSI capability
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.5:pcie00]
Feb 4 14:22:13 proprio-lpt Allocate Port Service[0000:00:1c.5:pcie02]
Feb 4 14:22:13 proprio-lpt Real Time Clock Driver v1.12ac
Feb 4 14:22:13 proprio-lpt hpet_resources: 0xfed00000 is busy
Feb 4 14:22:13 proprio-lpt Linux agpgart interface v0.102
Feb 4 14:22:13 proprio-lpt Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Feb 4 14:22:13 proprio-lpt Hangcheck: Using get_cycles().
Feb 4 14:22:13 proprio-lpt ACPI: EC: non-query interrupt received, switching to interrupt mode
Feb 4 14:22:13 proprio-lpt ACPI: AC Adapter [ACAD] (on-line)
Feb 4 14:22:13 proprio-lpt ACPI: Battery Slot [BAT1] (battery present)
Feb 4 14:22:13 proprio-lpt input: Power Button (FF) as /class/input/input0
Feb 4 14:22:13 proprio-lpt ACPI: Power Button (FF) [PWRF]
Feb 4 14:22:13 proprio-lpt input: Lid Switch as /class/input/input1
Feb 4 14:22:13 proprio-lpt ACPI: Lid Switch [LID0]
Feb 4 14:22:13 proprio-lpt input: Power Button (CM) as /class/input/input2
Feb 4 14:22:13 proprio-lpt ACPI: Power Button (CM) [PWRB]
Feb 4 14:22:13 proprio-lpt ACPI: SSDT 7FEC5598, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [SSDT](id 009B) - 6 Objects with 0 Devices 3 Methods 0 Regions
Feb 4 14:22:13 proprio-lpt ACPI: SSDT 7FEC5069, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [SSDT](id 009C) - 1 Objects with 0 Devices 1 Methods 0 Regions
Feb 4 14:22:13 proprio-lpt Monitor-Mwait will be used to enter C-1 state
Feb 4 14:22:13 proprio-lpt Monitor-Mwait will be used to enter C-2 state
Feb 4 14:22:13 proprio-lpt Monitor-Mwait will be used to enter C-3 state
Feb 4 14:22:13 proprio-lpt ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Feb 4 14:22:13 proprio-lpt ACPI: Processor [CPU0] (supports 8 throttling states)
Feb 4 14:22:13 proprio-lpt ACPI: SSDT 7FEC5812, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [SSDT](id 00A3) - 4 Objects with 0 Devices 4 Methods 0 Regions
Feb 4 14:22:13 proprio-lpt ACPI: SSDT 7FEC5513, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Feb 4 14:22:13 proprio-lpt Parsing all Control Methods:
Feb 4 14:22:13 proprio-lpt Table [SSDT](id 00A4) - 1 Objects with 0 Devices 1 Methods 0 Regions
Feb 4 14:22:13 proprio-lpt ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Feb 4 14:22:13 proprio-lpt ACPI: Processor [CPU1] (supports 8 throttling states)
Feb 4 14:22:13 proprio-lpt isapnp: Scanning for PnP cards...
Feb 4 14:22:13 proprio-lpt isapnp: No Plug & Play device found
Feb 4 14:22:13 proprio-lpt Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Feb 4 14:22:13 proprio-lpt floppy0: no floppy controllers found
Feb 4 14:22:13 proprio-lpt RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Feb 4 14:22:13 proprio-lpt loop: module loaded
Feb 4 14:22:13 proprio-lpt Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Feb 4 14:22:13 proprio-lpt Copyright (c) 1999-2006 Intel Corporation.
Feb 4 14:22:13 proprio-lpt e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
Feb 4 14:22:13 proprio-lpt e1000e: Copyright (c) 1999-2007 Intel Corporation.
Feb 4 14:22:13 proprio-lpt ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.1.18
Feb 4 14:22:13 proprio-lpt ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Feb 4 14:22:13 proprio-lpt e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
Feb 4 14:22:13 proprio-lpt e100: Copyright(c) 1999-2006 Intel Corporation
Feb 4 14:22:13 proprio-lpt tg3.c:v3.86 (November 9, 2007)
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:04:00.0 to 64
Feb 4 14:22:13 proprio-lpt eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:dd:e0:15
Feb 4 14:22:13 proprio-lpt eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Feb 4 14:22:13 proprio-lpt eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Feb 4 14:22:13 proprio-lpt PPP generic driver version 2.4.2
Feb 4 14:22:13 proprio-lpt NET: Registered protocol family 24
Feb 4 14:22:13 proprio-lpt PPPoL2TP kernel driver, V1.0
Feb 4 14:22:13 proprio-lpt console [netcon0] enabled
Feb 4 14:22:13 proprio-lpt netconsole: network logging started
Feb 4 14:22:13 proprio-lpt Linux video capture interface: v2.00
Feb 4 14:22:13 proprio-lpt et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver et61x251
Feb 4 14:22:13 proprio-lpt zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver zc0301
Feb 4 14:22:13 proprio-lpt Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 4 14:22:13 proprio-lpt ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 4 14:22:13 proprio-lpt ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
Feb 4 14:22:13 proprio-lpt ICH8M: not 100% native mode: will probe irqs later
Feb 4 14:22:13 proprio-lpt ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
Feb 4 14:22:13 proprio-lpt ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:pio, hdd:pio
Feb 4 14:22:13 proprio-lpt Probing IDE interface ide0...
Feb 4 14:22:13 proprio-lpt hda: Slimtype DVDRW SSM-8515S, ATAPI CD/DVD-ROM drive
Feb 4 14:22:13 proprio-lpt hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Feb 4 14:22:13 proprio-lpt hda: UDMA/33 mode selected
Feb 4 14:22:13 proprio-lpt ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 4 14:22:13 proprio-lpt Probing IDE interface ide1...
Feb 4 14:22:13 proprio-lpt Probing IDE interface ide1...
Feb 4 14:22:13 proprio-lpt hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Feb 4 14:22:13 proprio-lpt Uniform CD-ROM driver Revision: 3.20
Feb 4 14:22:13 proprio-lpt Driver 'sd' needs updating - please use bus_type methods
Feb 4 14:22:13 proprio-lpt ahci 0000:00:1f.2: version 3.0
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Feb 4 14:22:13 proprio-lpt ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
Feb 4 14:22:13 proprio-lpt ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1f.2 to 64
Feb 4 14:22:13 proprio-lpt scsi0 : ahci
Feb 4 14:22:13 proprio-lpt scsi1 : ahci
Feb 4 14:22:13 proprio-lpt scsi2 : ahci
Feb 4 14:22:13 proprio-lpt ata1: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504100 irq 216
Feb 4 14:22:13 proprio-lpt ata2: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504180 irq 216
Feb 4 14:22:13 proprio-lpt ata3: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504200 irq 216
Feb 4 14:22:13 proprio-lpt ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 4 14:22:13 proprio-lpt ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
Feb 4 14:22:13 proprio-lpt ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
Feb 4 14:22:13 proprio-lpt ata1.00: configured for UDMA/133
Feb 4 14:22:13 proprio-lpt ata2: SATA link down (SStatus 0 SControl 300)
Feb 4 14:22:13 proprio-lpt ata3: SATA link down (SStatus 0 SControl 300)
Feb 4 14:22:13 proprio-lpt scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] Write Protect is off
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] Write Protect is off
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 4 14:22:13 proprio-lpt sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
Feb 4 14:22:13 proprio-lpt sd 0:0:0:0: [sda] Attached SCSI disk
Feb 4 14:22:13 proprio-lpt I2O subsystem v1.325
Feb 4 14:22:13 proprio-lpt i2o: max drivers = 8
Feb 4 14:22:13 proprio-lpt Fusion MPT base driver 3.04.06
Feb 4 14:22:13 proprio-lpt Copyright (c) 1999-2007 LSI Corporation
Feb 4 14:22:13 proprio-lpt Fusion MPT SPI Host driver 3.04.06
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:0e:06.0[A] -> GSI 22 (level, low) -> IRQ 20
Feb 4 14:22:13 proprio-lpt ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f8200000-f82007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Feb 4 14:22:13 proprio-lpt ieee1394: raw1394: /dev/raw1394 device initialized
Feb 4 14:22:13 proprio-lpt usbmon: debugfs is not available
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.7 to 64
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1a.7: EHCI Host Controller
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1a.7: debug port 1
Feb 4 14:22:13 proprio-lpt PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 4 14:22:13 proprio-lpt usb usb1: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt hub 1-0:1.0: USB hub found
Feb 4 14:22:13 proprio-lpt hub 1-0:1.0: 4 ports detected
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.7 to 64
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1d.7: EHCI Host Controller
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1d.7: debug port 1
Feb 4 14:22:13 proprio-lpt PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf8504c00
Feb 4 14:22:13 proprio-lpt ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 4 14:22:13 proprio-lpt usb usb2: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt hub 2-0:1.0: USB hub found
Feb 4 14:22:13 proprio-lpt hub 2-0:1.0: 6 ports detected
Feb 4 14:22:13 proprio-lpt ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Feb 4 14:22:13 proprio-lpt USB Universal Host Controller Interface driver v3.0
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.0 to 64
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1a.0: UHCI Host Controller
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
Feb 4 14:22:13 proprio-lpt usb usb3: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt hub 3-0:1.0: USB hub found
Feb 4 14:22:13 proprio-lpt hub 3-0:1.0: 2 ports detected
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1a.1 to 64
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1a.1: UHCI Host Controller
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1a.1: irq 22, io base 0x00001820
Feb 4 14:22:13 proprio-lpt usb usb4: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt hub 4-0:1.0: USB hub found
Feb 4 14:22:13 proprio-lpt hub 4-0:1.0: 2 ports detected
Feb 4 14:22:13 proprio-lpt usb 1-2: new high speed USB device using ehci_hcd and address 2
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.0 to 64
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001840
Feb 4 14:22:13 proprio-lpt usb usb5: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt hub 5-0:1.0: USB hub found
Feb 4 14:22:13 proprio-lpt hub 5-0:1.0: 2 ports detected
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.1 to 64
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
Feb 4 14:22:13 proprio-lpt usb usb6: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt hub 6-0:1.0: USB hub found
Feb 4 14:22:13 proprio-lpt hub 6-0:1.0: 2 ports detected
Feb 4 14:22:13 proprio-lpt usb 1-2: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1d.2 to 64
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Feb 4 14:22:13 proprio-lpt uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
Feb 4 14:22:13 proprio-lpt usb usb7: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt hub 7-0:1.0: USB hub found
Feb 4 14:22:13 proprio-lpt hub 7-0:1.0: 2 ports detected
Feb 4 14:22:13 proprio-lpt ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f75b2402bff]
Feb 4 14:22:13 proprio-lpt usb 4-1: new full speed USB device using uhci_hcd and address 2
Feb 4 14:22:13 proprio-lpt usb 4-1: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt usb 4-2: new full speed USB device using uhci_hcd and address 3
Feb 4 14:22:13 proprio-lpt usb 4-2: configuration #1 chosen from 1 choice
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver usblp
Feb 4 14:22:13 proprio-lpt Initializing USB Mass Storage driver...
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver usb-storage
Feb 4 14:22:13 proprio-lpt USB Mass Storage support registered.
Feb 4 14:22:13 proprio-lpt PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 4 14:22:13 proprio-lpt serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 4 14:22:13 proprio-lpt serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 4 14:22:13 proprio-lpt mice: PS/2 mouse device common for all mice
Feb 4 14:22:13 proprio-lpt input: AT Translated Set 2 keyboard as /class/input/input3
Feb 4 14:22:13 proprio-lpt i2c /dev entries driver
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
Feb 4 14:22:13 proprio-lpt input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
Feb 4 14:22:13 proprio-lpt Bluetooth: Virtual HCI driver ver 1.2
Feb 4 14:22:13 proprio-lpt Bluetooth: HCI UART driver ver 2.2
Feb 4 14:22:13 proprio-lpt Bluetooth: HCI H4 protocol initialized
Feb 4 14:22:13 proprio-lpt Bluetooth: HCI BCSP protocol initialized
Feb 4 14:22:13 proprio-lpt Bluetooth: HCILL protocol initialized
Feb 4 14:22:13 proprio-lpt Bluetooth: Broadcom Blutonium firmware driver ver 1.1
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver bcm203x
Feb 4 14:22:13 proprio-lpt Bluetooth: Digianswer Bluetooth USB driver ver 0.9
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver bpa10x
Feb 4 14:22:13 proprio-lpt Bluetooth: BlueFRITZ! USB driver ver 1.1
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver bfusb
Feb 4 14:22:13 proprio-lpt Bluetooth: Generic Bluetooth USB driver ver 0.1
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver btusb
Feb 4 14:22:13 proprio-lpt Bluetooth: Generic Bluetooth SDIO driver ver 0.1
Feb 4 14:22:13 proprio-lpt cpuidle: using governor ladder
Feb 4 14:22:13 proprio-lpt cpuidle: using governor menu
Feb 4 14:22:13 proprio-lpt sdhci: Secure Digital Host Controller Interface driver
Feb 4 14:22:13 proprio-lpt sdhci: Copyright(c) Pierre Ossman
Feb 4 14:22:13 proprio-lpt Marking TSC unstable due to: TSC halts in idle.
Feb 4 14:22:13 proprio-lpt sdhci: SDHCI controller found at 0000:0e:06.1 [1180:0822] (rev 22)
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:0e:06.1[B] -> GSI 23 (level, low) -> IRQ 21
Feb 4 14:22:13 proprio-lpt sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Feb 4 14:22:13 proprio-lpt mmc0: SDHCI at 0xf8200800 irq 21 DMA
Feb 4 14:22:13 proprio-lpt ricoh-mmc: Ricoh MMC Controller disabling driver
Feb 4 14:22:13 proprio-lpt ricoh-mmc: Copyright(c) Philip Langdale
Feb 4 14:22:13 proprio-lpt Time: hpet clocksource has been installed.
Feb 4 14:22:13 proprio-lpt ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
Feb 4 14:22:13 proprio-lpt ricoh-mmc: Controller is now disabled.
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver usbhid
Feb 4 14:22:13 proprio-lpt drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Feb 4 14:22:13 proprio-lpt TCP cubic registered
Feb 4 14:22:13 proprio-lpt NET: Registered protocol family 1
Feb 4 14:22:13 proprio-lpt NET: Registered protocol family 10
Feb 4 14:22:13 proprio-lpt IPv6 over IPv4 tunneling driver
Feb 4 14:22:13 proprio-lpt NET: Registered protocol family 17
Feb 4 14:22:13 proprio-lpt Bluetooth: L2CAP ver 2.9
Feb 4 14:22:13 proprio-lpt Bluetooth: L2CAP socket layer initialized
Feb 4 14:22:13 proprio-lpt Bluetooth: SCO (Voice Link) ver 0.5
Feb 4 14:22:13 proprio-lpt Bluetooth: SCO socket layer initialized
Feb 4 14:22:13 proprio-lpt Bluetooth: RFCOMM socket layer initialized
Feb 4 14:22:13 proprio-lpt Bluetooth: RFCOMM TTY layer initialized
Feb 4 14:22:13 proprio-lpt Bluetooth: RFCOMM ver 1.8
Feb 4 14:22:13 proprio-lpt Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Feb 4 14:22:13 proprio-lpt Bluetooth: BNEP filters: protocol multicast
Feb 4 14:22:13 proprio-lpt RPC: Registered udp transport module.
Feb 4 14:22:13 proprio-lpt RPC: Registered tcp transport module.
Feb 4 14:22:13 proprio-lpt Using IPI No-Shortcut mode
Feb 4 14:22:13 proprio-lpt EXT3-fs: INFO: recovery required on readonly filesystem.
Feb 4 14:22:13 proprio-lpt EXT3-fs: write access will be enabled during recovery.
Feb 4 14:22:13 proprio-lpt Clocksource tsc unstable (delta = -358466691 ns)
Feb 4 14:22:13 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 14:22:13 proprio-lpt EXT3-fs: sda5: orphan cleanup on readonly fs
Feb 4 14:22:13 proprio-lpt ext3_orphan_cleanup: deleting unreferenced inode 191395
Feb 4 14:22:13 proprio-lpt EXT3-fs: sda5: 1 orphan inode deleted
Feb 4 14:22:13 proprio-lpt EXT3-fs: recovery complete.
Feb 4 14:22:13 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 14:22:13 proprio-lpt VFS: Mounted root (ext3 filesystem) readonly.
Feb 4 14:22:13 proprio-lpt Freeing unused kernel memory: 248k freed
Feb 4 14:22:13 proprio-lpt uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
Feb 4 14:22:13 proprio-lpt usbcore: registered new interface driver uvcvideo
Feb 4 14:22:13 proprio-lpt USB Video Class driver (v0.1.0)
Feb 4 14:22:13 proprio-lpt iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
Feb 4 14:22:13 proprio-lpt iwl3945: Copyright(c) 2003-2007 Intel Corporation
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:0c:00.0 to 64
Feb 4 14:22:13 proprio-lpt iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:00:1b.0 to 64
Feb 4 14:22:13 proprio-lpt iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Feb 4 14:22:13 proprio-lpt phy0: Selected rate control algorithm 'iwl-3945-rs'
Feb 4 14:22:13 proprio-lpt nvidia: module license 'NVIDIA' taints kernel.
Feb 4 14:22:13 proprio-lpt ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 4 14:22:13 proprio-lpt PCI: Setting latency timer of device 0000:01:00.0 to 64
Feb 4 14:22:13 proprio-lpt NVRM: loading NVIDIA UNIX x86 Kernel Module 169.09 Fri Jan 11 14:38:28 PST 2008
Feb 4 14:22:13 proprio-lpt EXT3 FS on sda5, internal journal
Feb 4 14:22:13 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 14:22:13 proprio-lpt EXT3 FS on sda6, internal journal
Feb 4 14:22:13 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 14:22:13 proprio-lpt kjournald starting. Commit interval 5 seconds
Feb 4 14:22:13 proprio-lpt EXT3 FS on sda2, internal journal
Feb 4 14:22:13 proprio-lpt EXT3-fs: recovery complete.
Feb 4 14:22:13 proprio-lpt EXT3-fs: mounted filesystem with ordered data mode.
Feb 4 14:22:13 proprio-lpt fuse init (API version 7.8)
Feb 4 14:22:13 proprio-lpt fuse distribution version: 2.7.2
Feb 4 14:22:13 proprio-lpt Adding 1044184k swap on /dev/sda7. Priority:-1 extents:1 across:1044184k
Feb 4 14:22:13 proprio-lpt ADDRCONF(NETDEV_UP): eth0: link is not ready
Feb 4 14:22:13 proprio-lpt acpid: starting up
Feb 4 14:22:13 proprio-lpt acpid: 1 rule loaded
Feb 4 14:22:15 proprio-lpt acpid: client connected from 4923[104:1002]
Feb 4 14:22:15 proprio-lpt acpid: 1 client rule loaded
Feb 4 14:22:21 proprio-lpt acpid: client connected from 5269[0:0]
Feb 4 14:22:21 proprio-lpt acpid: 1 client rule loaded
Feb 4 14:22:27 proprio-lpt acpid: client connected from 5269[0:0]
Feb 4 14:22:27 proprio-lpt acpid: 1 client rule loaded
Feb 4 14:22:38 proprio-lpt kdm: :0[5330]: pam_unix(kde:auth): authentication failure; logname= uid=0 euid=0 tty=:0 ruser= rhost= user=proprio
Feb 4 14:22:43 proprio-lpt kdm: :0[5330]: pam_unix(kde:session): session opened for user proprio by (uid=0)
Feb 4 14:23:00 proprio-lpt hcid[3194]: Default passkey agent (:1.7, /org/kde/kbluetooth_1234) registered
Feb 4 14:23:00 proprio-lpt hcid[3194]: Default authorization agent (:1.7, /org/kde/kbluetooth_auth_1234) registered
Feb 4 14:23:10 proprio-lpt su[5492]: pam_unix(su:auth): authentication failure; logname= uid=1000 euid=0 tty=pts/4 ruser=proprio rhost= user=root
Feb 4 14:23:12 proprio-lpt su[5492]: pam_authenticate: Échec d'authentification
Feb 4 14:23:12 proprio-lpt su[5492]: FAILED su for root by proprio
Feb 4 14:23:12 proprio-lpt su[5492]: - pts/4 proprio:root
Feb 4 14:23:14 proprio-lpt acpid: received event "battery BAT1 00000081 00000001"
Feb 4 14:23:14 proprio-lpt acpid: notifying client 4923[104:1002]
Feb 4 14:23:14 proprio-lpt acpid: notifying client 5269[0:0]
Feb 4 14:23:14 proprio-lpt acpid: notifying client 5269[0:0]
Feb 4 14:23:14 proprio-lpt acpid: executing action "/etc/acpi/default.sh battery BAT1 00000081 00000001"
Feb 4 14:23:14 proprio-lpt logger: ACPI event unhandled: battery BAT1 00000081 00000001
Feb 4 14:23:14 proprio-lpt acpid: action exited with status 0
Feb 4 14:23:14 proprio-lpt acpid: completed event "battery BAT1 00000081 00000001"
Feb 4 14:23:15 proprio-lpt su[5500]: Successful su for root by proprio
Feb 4 14:23:15 proprio-lpt su[5500]: + pts/4 proprio:root
Feb 4 14:23:15 proprio-lpt su[5500]: pam_unix(su:session): session opened for user root by (uid=1000)
Feb 4 14:23:24 proprio-lpt ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 4 14:23:24 proprio-lpt dhcpcd[5514]: wlan0: dhcpcd 3.2.1 starting
Feb 4 14:23:24 proprio-lpt dhcpcd[5514]: wlan0: hardware address = 00:1b:77:2b:60:fd
Feb 4 14:23:24 proprio-lpt dhcpcd[5514]: wlan0: DUID = 00:01:00:01:0e:c2:e8:ea:00:16:d4:dd:e0:15
Feb 4 14:23:24 proprio-lpt dhcpcd[5514]: wlan0: broadcasting for a lease
Feb 4 14:23:26 proprio-lpt wlan0: Initial auth_alg=0
Feb 4 14:23:26 proprio-lpt wlan0: authenticate with AP 00:1d:a2:c7:f9:70
Feb 4 14:23:26 proprio-lpt wlan0: RX authentication from 00:1d:a2:c7:f9:70 (alg=0 transaction=2 status=0)
Feb 4 14:23:26 proprio-lpt wlan0: authenticated
Feb 4 14:23:26 proprio-lpt wlan0: associate with AP 00:1d:a2:c7:f9:70
Feb 4 14:23:26 proprio-lpt wlan0: RX AssocResp from 00:1d:a2:c7:f9:70 (capab=0x421 status=0 aid=4)
Feb 4 14:23:26 proprio-lpt wlan0: associated
Feb 4 14:23:26 proprio-lpt wlan0: switched to short barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:23:26 proprio-lpt ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Feb 4 14:23:27 proprio-lpt dhcpcd[5514]: wlan0: offered 147.161.36.68 from 1.1.1.1
Feb 4 14:23:27 proprio-lpt dhcpcd[5514]: wlan0: checking 147.161.36.68 is available on attached networks
Feb 4 14:23:28 proprio-lpt dhcpcd[5514]: wlan0: leased 147.161.36.68 for 86400 seconds
Feb 4 14:23:28 proprio-lpt dhcpcd[5514]: wlan0: no renewal time supplied, assuming 43200 seconds
Feb 4 14:23:28 proprio-lpt dhcpcd[5514]: wlan0: no rebind time supplied, assuming 75600 seconds
Feb 4 14:23:28 proprio-lpt dhcpcd[5514]: wlan0: adding IP address 147.161.36.68/24
Feb 4 14:23:28 proprio-lpt dhcpcd[5514]: wlan0: adding default route via 147.161.36.10 metric 0
Feb 4 14:23:28 proprio-lpt dhcpcd[5514]: wlan0: exiting
Feb 4 14:23:34 proprio-lpt su[5500]: pam_unix(su:session): session closed for user root
Feb 4 14:23:37 proprio-lpt wlan0: no IPv6 routers present
Feb 4 14:23:45 proprio-lpt (proprio-5531): démarrage (version 2.20.1), pid 5531 utilisateur « proprio »
Feb 4 14:23:45 proprio-lpt (proprio-5531): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Feb 4 14:23:45 proprio-lpt (proprio-5531): Adresse « xml:readwrite:/home/proprio/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Feb 4 14:23:45 proprio-lpt (proprio-5531): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Feb 4 14:27:55 proprio-lpt su[5589]: Successful su for root by proprio
Feb 4 14:27:55 proprio-lpt su[5589]: + pts/4 proprio:root
Feb 4 14:27:55 proprio-lpt su[5589]: pam_unix(su:session): session opened for user root by (uid=1000)
Feb 4 14:28:05 proprio-lpt su[5625]: Successful su for root by proprio
Feb 4 14:28:05 proprio-lpt su[5625]: + pts/5 proprio:root
Feb 4 14:28:05 proprio-lpt su[5625]: pam_unix(su:session): session opened for user root by (uid=1000)
Feb 4 14:29:39 proprio-lpt rc-scripts: emerge --sync failed
Feb 4 14:30:21 proprio-lpt wlan0: switched to long barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:30:21 proprio-lpt wlan0: switched to short barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:30:22 proprio-lpt wlan0: switched to long barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:30:23 proprio-lpt wlan0: switched to short barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:31:17 proprio-lpt rc-scripts: emerge --sync failed
Feb 4 14:40:32 proprio-lpt wlan0: switched to long barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:40:35 proprio-lpt wlan0: switched to short barker preamble (BSSID=00:1d:a2:c7:f9:70)
Feb 4 14:46:03 proprio-lpt su[5827]: Successful su for root by proprio
Feb 4 14:46:03 proprio-lpt su[5827]: + pts/8 proprio:root
Feb 4 14:46:03 proprio-lpt su[5827]: pam_unix(su:session): session opened for user root by (uid=1000)
Feb 4 14:46:03 proprio-lpt su[5827]: pam_unix(su:session): session closed for user root
Feb 4 14:46:03 proprio-lpt su[5832]: Successful su for root by proprio
Feb 4 14:46:03 proprio-lpt su[5832]: + pts/8 proprio:root
Feb 4 14:46:03 proprio-lpt su[5832]: pam_unix(su:session): session opened for user root by (uid=1000)