FreeBSD stable

# -- sysinstall generated deltas -- # Tue Jan 29 11:35:13 2008# Created: Tue Jan 29 11:35:13 2008# Enable network daemons for user convenience.# Please make all changes to this file, not to /etc/defaults/rc.conf.# This file now contains just the overrides from /etc/defaults/rc.conf.hostname="internode.crcable.net"ifconfig_fxp0="DHCP"moused_enable="YES"moused_flags="-3"moused_port="/dev/psm0"moused_type="auto"usbd_enable="YES"syslogd_enable="YES"syslogd_flags="-4 -b 127.0.0.1"firewall_enable="YES"firewall_script="/etc/firewall"dbus_enable="YES"hald_enable="YES"polkitd_enable="YES"ntop_enable="YES"ntop_flags="-w 127.0.0.1:5100 -d --use-syslog=daemon"CPUTYPE=i686KERNCONF=INTERNODENO_MODULES=YESNO_INET6=YESNO_KERBEROS=YESNO_BLUETOOTH=YESNO_ATM=YESNO_NIS=YESNO_GAMES=YESCopyright (c) 1992-2007 The FreeBSD Project.Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994        The Regents of the University of California. All rights reserved.FreeBSD is a registered trademark of The FreeBSD Foundation.FreeBSD 6.2-RELEASE-p10 #0: Wed Jan 30 11:01:33 PST 2008    root@internode.crcable.net:/usr/obj/usr/src/sys/INTERNODETimecounter "i8254" frequency 1193182 Hz quality 0CPU: Intel(R) Celeron(R) CPU 2.40GHz (2399.74-MHz 686-class CPU)  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>  Features2=0x4400<CNTX-ID,<b14>>real memory  = 527630336 (503 MB)avail memory = 506925056 (483 MB)ACPI APIC Table: <GATEWA OEMAPIC >ioapic0 <Version 2.0> irqs 0-23 on motherboardkbd1 at kbdmux0acpi0: <GATEWA 03DT004> on motherboardacpi0: Power Button (fixed)Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0cpu0: <ACPI CPU> on acpi0acpi_throttle0: <ACPI CPU Throttling> on cpu0pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0pci0: <ACPI PCI bus> on pcib0agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 16 at device 2.0 on pci0agp0: detected 8060k stolen memoryagp0: aperture size is 128Mdrmsub0: <Intel i845G GMCH>: (child of agp_i810.c) on agp0info: [drm] AGP at 0xf0000000 128MBinfo: [drm] Initialized i915 1.4.0 20060119uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xef20-0xef3f irq 16 at device 29.0 on pci0uhci0: [GIANT-LOCKED]usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0usb0: USB revision 1.0uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1uhub0: 2 ports with 2 removable, self powereduhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xef40-0xef5f irq 19 at device 29.1 on pci0uhci1: [GIANT-LOCKED]usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1usb1: USB revision 1.0uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1uhub1: 2 ports with 2 removable, self powereduhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xef80-0xef9f irq 18 at device 29.2 on pci0uhci2: [GIANT-LOCKED]usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2usb2: USB revision 1.0uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1uhub2: 2 ports with 2 removable, self poweredehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffa7fc00-0xffa7ffff irq 23 at device 29.7 on pci0ehci0: [GIANT-LOCKED]usb3: EHCI version 1.0usb3: companion controllers, 2 ports each: usb0 usb1 usb2usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0usb3: USB revision 2.0uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1uhub3: 6 ports with 6 removable, self poweredpcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0pci1: <ACPI PCI bus> on pcib1fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xdf00-0xdf3f mem 0xff8ff000-0xff8fffff irq 20 at device 8.0 on pci1miibus0: <MII bus> on fxp0inphy0: <i82562ET 10/100 media interface> on miibus0inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, autofxp0: Ethernet address: 00:0c:f1:72:8b:acisab0: <PCI-ISA bridge> at device 31.0 on pci0isa0: <ISA bus> on isab0atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0ata0: <ATA channel 0> on atapci0ata1: <ATA channel 1> on atapci0pci0: <serial bus, SMBus> at device 31.3 (no driver attached)pcm0: <Intel ICH4 (82801DB)> port 0xe800-0xe8ff,0xee80-0xeebf mem 0xffa7f800-0xffa7f9ff,0xffa7f400-0xffa7f4ff irq 17 at device 31.5 on pci0pcm0: primary codec not ready!pcm0: <Avance Logic ALC202 AC97 Codec>acpi_button0: <Sleep Button> on acpi0speaker0: <PC speaker> port 0x61 on acpi0sio0: configured irq 4 not in bitmap of probed irqs 0sio0: port may not be enabledsio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0sio0: type 16550Appc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE modeppc0: FIFO with 16/16/8 bytes thresholdppbus0: <Parallel port bus> on ppc0plip0: <PLIP network interface> on ppbus0lpt0: <Printer> on ppbus0lpt0: Interrupt-driven portppi0: <Parallel I/O> on ppbus0atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0atkbd0: <AT Keyboard> irq 1 on atkbdc0kbd0 at atkbd0atkbd0: [GIANT-LOCKED]psm0: <PS/2 Mouse> irq 12 on atkbdc0psm0: [GIANT-LOCKED]psm0: model IntelliMouse, device ID 3pmtimer0 on isa0orm0: <ISA Option ROMs> at iomem 0xcb800-0xcc7ff,0xcc800-0xcd7ff on isa0sc0: <System console> at flags 0x100 on isa0sc0: VGA <16 virtual consoles, flags=0x300>sio1: configured irq 3 not in bitmap of probed irqs 0sio1: port may not be enabledvga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0Timecounter "TSC" frequency 2399743300 Hz quality 800Timecounters tick every 1.000 msecipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimitedad0: 76319MB <WDC WD800BB-53DKA0 77.07W77> at ata0-master UDMA100acd0: CDRW <HL-DT-ST RW/DVD GCC-4480B/GW02> at ata1-master UDMA33Trying to mount root from ufs:/dev/ad0s1acd0 at ata1 bus 0 target 0 lun 0cd0: <HL-DT-ST RW/DVD GCC-4480B GW02> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transferscd0: Attempt to query device size failed: NOT READY, Medium not presentfxp0: promiscuous mode enabledNO_BIND=YESNO_I4B=YESDISTDIR=/usr/src/distfilesgdm_enable="YES"clear_tmp_enable="YES"