rendered paste bodyACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 519808
Kernel command line: root=/dev/hda1 ro vga=791 apm=off acpi=force
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1596.070 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2068752k/2095600k available (1721k kernel code, 25536k reserved, 672k data, 240k init, 1178056k highmem)
virtual kernel memory layout:
fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc035d000 - 0xc0399000 ( 240 kB)
.data : 0xc02ae7cd - 0xc03568c4 ( 672 kB)
.text : 0xc0100000 - 0xc02ae7cd (1721 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3197.04 BogoMIPS (lpj=6394080)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3192.36 BogoMIPS (lpj=6384722)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
Total of 2 processors activated (6389.40 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
Time: tsc clocksource has been installed.
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 7000-7fff
MEM window: 9c200000-9c2fffff
PREFETCH window: 88000000-8fffffff
PCI: Bridge: 0000:00:1c.0
IO window: 6000-6fff
MEM window: 9b200000-9c1fffff
PREFETCH window: 94100000-950fffff
PCI: Bridge: 0000:00:1c.1
IO window: 5000-5fff
MEM window: 9a100000-9b1fffff
PREFETCH window: 95100000-960fffff
PCI: Bridge: 0000:00:1c.2
IO window: 4000-4fff
MEM window: 99100000-9a0fffff
PREFETCH window: 96100000-970fffff
PCI: Bridge: 0000:00:1c.3
IO window: 3000-3fff
MEM window: 98100000-990fffff
PREFETCH window: 97100000-980fffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: 92000000-940fffff
PREFETCH window: 90000000-91ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
it is
Freeing initrd memory: 5290k freed
audit: initializing netlink socket (disabled)
audit(1201697670.568:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Firmware left 0000:06:08.0 e100 interrupts enabled, disabling
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0x88000000, mapped to 0xf8880000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:aae8
vesafb: pmi: set display start = c00cab76, set palette = c00cac38
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 240k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:06:08.0 to 64
e100: eth0: e100_probe: addr 0x94000000, irq 20, MAC addr 00:40:D0:95:DA:37
ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:06:02.0 to 64
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
net eth1: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface eth0 to eth1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00008080
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
firewire_ohci: Added fw-ohci device 0000:06:02.0, OHCI version 1.10
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008060
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008040
Clocksource tsc unstable (delta = -146611163 ns)
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
firewire_core: created new fw device fw0 (0 config rom retries, S400)
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008020
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x9c304000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x80a0-0x80a7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: ST9120822A, ATA DISK drive
hdb: _NEC DVD_RW ND-6750A, ATAPI CD/DVD-ROM drive
hda: selected mode 0x45
hdb: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
SCSI subsystem initialized
libata version 2.21 loaded.
hda: max request size: 512KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
intel_rng: FWH not detected
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.15ks
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
input: Power Button (FF) as /class/input/input1
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
input: Video Bus as /class/input/input5
ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04713/0x200000
ACPI: Battery Slot [BAT0] (battery present)
input: SynPS/2 Synaptics TouchPad as /class/input/input6
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: AC Adapter [AC] (off-line)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:06:02.2 [1217:7120] (rev 1)
ACPI: PCI Interrupt 0000:06:02.2[A] -> GSI 16 (level, low) -> IRQ 16
sdhci:slot0: Unknown controller version (16). You may experience problems.
mmc0: SDHCI at 0x94004800 irq 16 PIO
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
net eth2: device_rename: sysfs_create_symlink failed (-17)
net wlan0_rename: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface wmaster0 to eth2
Adding 2650684k swap on /dev/hda5. Priority:-1 extents:1 across:2650684k
EXT3 FS on hda1, internal journal
loop: module loaded
apm: BIOS not found.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.45.4 [Jan 16 2008] on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ADDRCONF(NETDEV_UP): eth1: link is not ready
[fglrx] Reserve Block - 0 offset = 0X1000000 length = 0X5000
[fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[fglrx] Reserve Block - 2 offset = 0X7fff000 length = 0X1000
[fglrx] Reserve Block - 3 offset = 0X7fbf000 length = 0X40000
[fglrx] interrupt source 10000000 successfully enabled
[fglrx] enable ID = 0x00000008
[fglrx] Receive enable interrupt message with irqEnableMask: 10000000
wlan0_rename: Initial auth_alg=0
wlan0_rename: authenticate with AP 00:12:bf:27:33:a8
wlan0_rename: authenticate with AP 00:12:bf:27:33:a8
wlan0_rename: RX authentication from 00:12:bf:27:33:a8 (alg=0 transaction=2 status=0)
wlan0_rename: authenticated
wlan0_rename: associate with AP 00:12:bf:27:33:a8
wlan0_rename: RX AssocResp from 00:12:bf:27:33:a8 (capab=0x471 status=0 aid=1)
wlan0_rename: associated
ADDRCONF(NETDEV_CHANGE): wlan0_rename: link becomes ready
wlan0_rename: no IPv6 routers present
usb 5-2: new high speed USB device using ehci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access ST350083 0A 0000 PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
File system has been set read-only
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)
FAT: Filesystem panic (dev sda1)
fat_get_cluster: invalid cluster chain (i_pos 6043335)