rendered paste bodydrasko@Lenin:~/dmel$ qemu -hda rootfs.img -kernel bzImage -append "root=/dev/hda clock=pit console=ttyS0" -serial stdio
Could not open '/dev/kqemu' - QEMU acceleration layer not activated: No such file or directory
header magic: 0x53726448
qemu: real_addr = 0x10000
qemu: cmdline_addr = 0x20000
qemu: prot_addr = 0x100000
Linux version 2.6.23 (root@Lenin) (gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4)) #1 SMP Mon Jan 28 22:37:53 CET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000008000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
found SMP MP-table at 000faa20
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 32752
HighMem 32752 -> 32752
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 32752
DMI not present or invalid.
Using APIC driver default
ACPI: RSDP 000FAA30, 0014 (r0 BOCHS )
ACPI: RSDT 07FF0000, 002C (r0 BOCHS BXPCRSDT 1 BXPC 1)
ACPI: FACP 07FF002C, 0074 (r0 BOCHS BXPCFACP 1 BXPC 1)
ACPI: DSDT 07FF0100, 0832 (r1 BXPC BXDSDT 1 INTL 20060912)
ACPI: FACS 07FF00C0, 0040
ACPI: APIC 07FF0938, 0040 (r0 BOCHS BXPCAPIC 1 BXPC 1)
ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: BOCHSCPU Product ID: 0.1 APIC at: 0xFEE00000
Processor #0 6:0 APIC version 17
I/O APIC #1 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 10000000 (gap: 08000000:f7fc0000)
Built 1 zonelists in Zone order. Total pages: 32497
Kernel command line: root=/dev/hda clock=pit console=ttyS0
Warning! clock= boot option is deprecated. Use clocksource=xyz
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 1542.957 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 123436k/131008k available (3200k kernel code, 7036k reserved, 1606k data, 260k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB)
lowmem : 0xc0000000 - 0xc7ff0000 ( 127 MB)
.init : 0xc05b9000 - 0xc05fa000 ( 260 kB)
.data : 0xc0420356 - 0xc05b1dac (1606 kB)
.text : 0xc0100000 - 0xc0420356 (3200 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 2897.92 BogoMIPS (lpj=5795844)
Mount-cache hash table entries: 512
CPU: L1 I cache: 8K
CPU: L2 cache: 128K
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 18k freed
CPU0: Intel Pentium II (Klamath) stepping 03
Total of 1 processors activated (2897.92 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
APIC timer disabled due to verification failure.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfa3e0, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region b000-b03f claimed by PIIX4 ACPI
PCI quirk: region b100-b10f claimed by PIIX4 SMB
PCI: Using IRQ router PIIX/ICH [8086/7000] at 0000:00:01.0
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
Time: pit clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 49152 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
Activating ISA DMA hang workarounds.
Clocksource tsc unstable (delta = 77518978 ns)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
FDC 0 is a S82078B
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:01.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
hda: QEMU HARDDISK, ATA DISK drive
hda: applying conservative PIO "downgrade"
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 20480 sectors (10 MB) w/256KiB Cache, CHS=20/255/63, (U)DMA
hda: cache flushes supported
hda:
hdc: ATAPI 4X CD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.002.
Fusion MPT base driver 3.04.05
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.05
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 260k freed
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
drasko@Lenin:~/dmel$