rendered paste bodyjeremy-laptop:/home/jeremy# smartctl -a /dev/hda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST9120822A
Serial Number: 5LZ005KF
Firmware Version: 3.ALA
User Capacity: 120.034.123.776 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Tue Jan 29 19:15:29 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 102 100 034 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2752
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 169582607
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3997
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2730
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
189 Unknown_Attribute 0x003a 072 072 000 Old_age Always - 28
190 Temperature_Celsius 0x0022 066 049 045 Old_age Always - 589234210
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1332
193 Load_Cycle_Count 0x0032 085 085 000 Old_age Always - 30794
194 Temperature_Celsius 0x0022 034 051 000 Old_age Always - 34 (Lifetime Min/Max 0/13)
195 Hardware_ECC_Recovered 0x001a 063 048 000 Old_age Always - 95527763
197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967295
198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967295
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 c0 d3 14 e7 Error: UNC at LBA = 0x0714d3c0 = 118805440
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 00 08 bf d3 14 e7 00 00:01:30.693 READ MULTIPLE
c4 00 08 b7 d3 14 e7 00 00:01:30.690 READ MULTIPLE
c4 00 08 af d3 14 e7 00 00:01:30.687 READ MULTIPLE
c4 00 08 a7 d3 14 e7 00 00:01:30.726 READ MULTIPLE
c4 00 08 9f d3 14 e7 00 00:01:30.723 READ MULTIPLE
Error 5 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 bf c0 d3 14 e7 Error: UNC at LBA = 0x0714d3c0 = 118805440
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 00 00 7f d3 14 e7 00 00:01:08.621 READ MULTIPLE
c4 00 00 7f d2 14 e7 00 00:01:08.536 READ MULTIPLE
c4 00 00 7f d1 14 e7 00 00:01:08.453 READ MULTIPLE
c4 00 00 7f d0 14 e7 00 00:01:08.369 READ MULTIPLE
c4 00 00 7f cf 14 e7 00 00:01:08.285 READ MULTIPLE
Error 4 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c6 d3 14 e7 Error: UNC at LBA = 0x0714d3c6 = 118805446
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 bf d3 14 e7 00 00:00:48.068 READ DMA
c8 00 08 b7 d3 14 e7 00 00:00:48.071 READ DMA
c8 00 08 af d3 14 e7 00 00:00:48.071 READ DMA
c8 00 08 a7 d3 14 e7 00 00:00:48.070 READ DMA
c8 00 08 9f d3 14 e7 00 00:00:48.070 READ DMA
Error 3 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c6 d3 14 e7 Error: UNC at LBA = 0x0714d3c6 = 118805446
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 7f d3 14 e7 00 00:00:44.314 READ DMA
c8 00 00 7f d2 14 e7 00 00:00:44.310 READ DMA
c8 00 00 7f d1 14 e7 00 00:00:44.307 READ DMA
c8 00 00 7f d0 14 e7 00 00:00:44.304 READ DMA
c8 00 00 7f cf 14 e7 00 00:00:44.299 READ DMA
Error 2 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c6 d3 14 e7 Error: UNC at LBA = 0x0714d3c6 = 118805446
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 bf d3 14 e7 00 00:00:51.958 READ DMA
c8 00 08 b7 d3 14 e7 00 00:00:51.958 READ DMA
c8 00 08 af d3 14 e7 00 00:00:51.957 READ DMA
c8 00 08 a7 d3 14 e7 00 00:00:51.957 READ DMA
c8 00 08 9f d3 14 e7 00 00:00:51.957 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 62 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.