Unnamed

shannon@MTIA20MLNX:~$ dmesg
[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Jul 7 19:27:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
[17179569.184000]  BIOS-e820: 000000000bff0000 - 000000000bffec00 (ACPI data)
[17179569.184000]  BIOS-e820: 000000000bffec00 - 000000000c000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 191MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 49136
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 45040 pages, LIFO batch:7
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6b30
[17179569.184000] ACPI: RSDT (v001 PTLTD    RSDT   0x06041130  LTP 0x00000000) @ 0x0bff596d
[17179569.184000] ACPI: FADT (v001 IBM    TP-A20M  0x06041130  0x00000000) @ 0x0bffeb65
[17179569.184000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06041130  LTP 0x00000001) @ 0x0bffebd9
[17179569.184000] ACPI: DSDT (v001 IBM    TP A20m  0x06041130 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is required to enable ACPI
[17179569.184000] ACPI: Disabling ACPI support
[17179569.184000] Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (01181000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[    0.000000] Detected 498.863 MHz processor.
[172784.607259] Using tsc for high-res timesource
[172784.608680] Console: colour VGA+ 80x25
[172784.609230] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[172784.609986] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[172784.633965] Memory: 184372k/196544k available (1976k kernel code, 11660k reserved, 606k data, 288k init, 0k highmem)
[172784.633981] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[172784.710229] Calibrating delay using timer specific routine.. 999.14 BogoMIPS (lpj=1998295)
[172784.710332] Security Framework v1.0.0 initialized
[172784.710356] SELinux:  Disabled at boot.
[172784.710403] Mount-cache hash table entries: 512
[172784.710685] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[172784.710715] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[172784.710745] CPU: L1 I cache: 16K, L1 D cache: 16K
[172784.710756] CPU: L2 cache: 128K
[172784.710765] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[172784.710814] mtrr: v2.0 (20020519)
[172784.710831] CPU: Intel Celeron (Coppermine) stepping 03
[172784.710845] Enabling fast FPU save and restore... done.
[172784.710856] Enabling unmasked SIMD FPU exception support... done.
[172784.710869] Checking 'hlt' instruction... OK.
[172784.726840] checking if image is initramfs... it is
[172787.731038] Freeing initrd memory: 6625k freed
[172787.769699] NET: Registered protocol family 16
[172787.769806] EISA bus registered
[172787.770071] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
[172787.770093] PCI: Using configuration type 1
[172787.771512] ACPI: Subsystem revision 20051216
[172787.771524] ACPI: Interpreter disabled.
[172787.771536] Linux Plug and Play Support v0.97 (c) Adam Belay
[172787.771560] pnp: PnP ACPI: disabled
[172787.771572] PnPBIOS: Scanning system for PnP BIOS support...
[172787.771644] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6be0
[172787.771658] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb1ca, dseg 0x400
[172787.790008] PnPBIOS: 21 nodes reported by PnP BIOS; 21 recorded by driver
[172787.790057] PCI: Probing PCI hardware
[172787.790070] PCI: Probing PCI hardware (bus 00)
[172787.790947] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[172787.790962] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[172787.790978] PIIX4 devres C PIO at 15e8-15ef
[172787.790989] PIIX4 devres I PIO at 03f0-03f7
[172787.791001] PIIX4 devres J PIO at 002e-002f
[172787.791240] Boot video device is 0000:01:00.0
[172787.793601] PCI: Discovered primary peer bus 08 [IRQ]
[172787.793628] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[172787.801068] pnp: 00:00: ioport range 0x15e8-0x15ef has been reserved
[172787.801118] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[172787.801131] pnp: 00:0b: ioport range 0x1000-0x103f has been reserved
[172787.801144] pnp: 00:0b: ioport range 0x1040-0x104f has been reserved
[172787.801914] PCI: Bridge: 0000:00:01.0
[172787.801928]   IO window: 2000-2fff
[172787.801941]   MEM window: f4200000-f5ffffff
[172787.801954]   PREFETCH window: 18000000-180fffff
[172787.801966] PCI: Bus 2, cardbus bridge: 0000:00:02.0
[172787.801976]   IO window: 00001400-000014ff
[172787.801988]   IO window: 00001c00-00001cff
[172787.802000]   PREFETCH window: 10000000-11ffffff
[172787.802013]   MEM window: 12000000-13ffffff
[172787.802024] PCI: Bus 6, cardbus bridge: 0000:00:02.1
[172787.802034]   IO window: 00003000-000030ff
[172787.802045]   IO window: 00003400-000034ff
[172787.802058]   PREFETCH window: 14000000-15ffffff
[172787.802070]   MEM window: 16000000-17ffffff
[172787.802114] PCI: Found IRQ 11 for device 0000:00:02.0
[172787.802137] PCI: Sharing IRQ 11 with 0000:00:05.0
[172787.802155] PCI: Sharing IRQ 11 with 0000:01:00.0
[172787.802185] PCI: Found IRQ 11 for device 0000:00:02.1
[172787.802438] Simple Boot Flag at 0x35 set to 0x1
[172787.803914] audit: initializing netlink socket (disabled)
[172787.803950] audit(1152627212.248:1): initialized
[172787.804278] VFS: Disk quotas dquot_6.5.1
[172787.804354] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[172787.804518] Initializing Cryptographic API
[172787.804533] io scheduler noop registered
[172787.804555] io scheduler anticipatory registered
[172787.804573] io scheduler deadline registered
[172787.804606] io scheduler cfq registered
[172787.804620] Limiting direct PCI/PCI transfers.
[172787.805270] isapnp: Scanning for PnP cards...
[172788.158743] isapnp: No Plug & Play device found
[172788.231948] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[172788.244803] serio: i8042 AUX port at 0x60,0x64 irq 12
[172788.246285] serio: i8042 KBD port at 0x60,0x64 irq 1
[172788.246442] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[172788.246684] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[172788.246945] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[172788.256790] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[172788.257474] PCI: Found IRQ 11 for device 0000:00:03.1
[172788.257499] PCI: Sharing IRQ 11 with 0000:00:03.0
[172788.259488] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[172788.259664] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[172788.259680] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[172788.260113] mice: PS/2 mouse device common for all mice
[172788.262315] EISA: Probing bus 0 at eisa.0
[172788.262336] Cannot allocate resource for EISA slot 1
[172788.262348] Cannot allocate resource for EISA slot 2
[172788.262358] Cannot allocate resource for EISA slot 3
[172788.262391] EISA: Detected 0 cards.
[172788.262515] NET: Registered protocol family 2
[172788.284618] input: AT Translated Set 2 keyboard as /class/input/input0
[172788.304848] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[172788.305248] TCP established hash table entries: 8192 (order: 3, 32768 bytes)[172788.305364] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[172788.305478] TCP: Hash tables configured (established 8192 bind 8192)
[172788.305489] TCP reno registered
[172788.305782] TCP bic registered
[172788.305811] NET: Registered protocol family 1
[172788.305834] NET: Registered protocol family 8
[172788.305843] NET: Registered protocol family 20
[172788.305908] Using IPI Shortcut mode
[172788.306033] Freeing unused kernel memory: 288k freed
[172788.503293] vga16fb: initializing
[172788.503311] vga16fb: mapped to 0xc00a0000
[172788.623452] Console: switching to colour frame buffer device 80x25
[172788.623481] fb0: VGA16 VGA frame buffer device
[172789.840362] Capability LSM initialized
[172791.780076] PIIX4: IDE controller at PCI slot 0000:00:07.1
[172791.780119] PIIX4: chipset revision 1
[172791.780128] PIIX4: not 100% native mode: will probe irqs later
[172791.780153]     ide0: BM-DMA at 0x1850-0x1857, BIOS settings: hda:DMA, hdb:pio
[172791.780192]     ide1: BM-DMA at 0x1858-0x185f, BIOS settings: hdc:DMA, hdd:pio
[172791.780219] Probing IDE interface ide0...
[172792.067198] hda: IBM-DARA-212000, ATA DISK drive
[172792.739250] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[172792.739784] Probing IDE interface ide1...
[172793.474585] hdc: CRN-8241U, ATAPI CD/DVD-ROM drive
[172794.148549] ide1 at 0x170-0x177,0x376 on irq 15
[172794.170848] hda: max request size: 128KiB
[172794.530109] hda: 23572080 sectors (12068 MB) w/418KiB Cache, CHS=24944/15/63, UDMA(33)
[172794.530134] hda: cache flushes not supported
[172794.530612]  hda: hda1 hda2 hda3
[172794.561766] hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
[172794.561795] Uniform CD-ROM driver Revision: 3.20
[172795.280880] usbcore: registered new driver usbfs
[172795.282007] usbcore: registered new driver hub
[172795.289068] USB Universal Host Controller Interface driver v2.3
[172795.290201] PCI: Found IRQ 11 for device 0000:00:07.2
[172795.290263] uhci_hcd 0000:00:07.2: UHCI Host Controller
[172795.291416] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[172795.291448] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860
[172795.292585] hub 1-0:1.0: USB hub found
[172795.292629] hub 1-0:1.0: 2 ports detected
[172795.625068] Attempting manual resume
[172795.672289] ReiserFS: hda2: found reiserfs format "3.6" with standard journal
[172796.169046] ReiserFS: hda2: using ordered data mode
[172796.183634] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[172796.190227] ReiserFS: hda2: checking transaction log (hda2)
[172796.269565] ReiserFS: hda2: Using r5 hash to sort names
[172820.198952] Linux agpgart interface v0.101 (c) Dave Jones
[172820.211670] agpgart: Detected an Intel 440BX Chipset.
[172820.216547] agpgart: AGP aperture is 64M @ 0xf8000000
[172820.340294] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[172820.366968] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[172820.447425] PCI: Found IRQ 11 for device 0000:00:02.0
[172820.447456] PCI: Sharing IRQ 11 with 0000:00:05.0
[172820.447477] PCI: Sharing IRQ 11 with 0000:01:00.0
[172820.447504] Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
[172820.447533] Yenta: Using INTVAL to route CSC interrupts to PCI
[172820.447542] Yenta: Routing CardBus interrupts to PCI
[172820.447556] Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
[172820.679504] Yenta: ISA IRQ mask 0x06b0, PCI irq 11
[172820.679520] Socket status: 30000006
[172820.703070] PCI: Found IRQ 11 for device 0000:00:02.1
[172820.703132] Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
[172820.703160] Yenta: Using INTVAL to route CSC interrupts to PCI
[172820.703169] Yenta: Routing CardBus interrupts to PCI
[172820.703183] Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
[172820.954426] Yenta: ISA IRQ mask 0x06b0, PCI irq 11
[172820.954442] Socket status: 30000006
[172821.491945] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[172821.491963] piix4_smbus 0000:00:07.3: IBM Laptop detected; this module may corrupt your serial eeprom! Refusing to load module!
[172821.491980] piix4_smbus: probe of 0000:00:07.3 failed with error -1
[172822.217020] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[172822.217035] e100: Copyright(c) 1999-2005 Intel Corporation
[172822.217172] PCI: Found IRQ 11 for device 0000:00:03.0
[172822.217197] PCI: Sharing IRQ 11 with 0000:00:03.1
[172822.312769] e100: eth0: e100_probe: addr 0xf4120000, irq 11, MAC addr 00:90:27:96:A2:8F
[172822.565630] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[172822.606076] input: TPPS/2 IBM TrackPoint as /class/input/input1
[172823.012702] Real Time Clock Driver v1.12
[172823.132878] PCI: Found IRQ 11 for device 0000:00:05.0
[172823.132900] PCI: Sharing IRQ 11 with 0000:00:02.0
[172823.132930] PCI: Sharing IRQ 11 with 0000:01:00.0
[172823.295288] cs46xx: failure waiting for FIFO command to complete
[172823.410536] input: PC Speaker as /class/input/input2
[172823.701894] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1754kHz
[172824.934151] parport: PnPBIOS parport detected.
[172824.934206] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[172824.965088] Floppy drive(s): fd0 is 1.44M
[172824.984123] FDC 0 is a National Semiconductor PC87306
[172825.168163] cs: IO port probe 0x100-0x3af: clean.
[172825.169195] cs: IO port probe 0x3e0-0x4ff: clean.
[172825.169658] cs: IO port probe 0x820-0x8ff: clean.
[172825.170065] cs: IO port probe 0xc00-0xcf7: clean.
[172825.170770] cs: IO port probe 0xa00-0xaff: clean.
[172825.173434] cs: IO port probe 0x100-0x3af: clean.
[172825.174415] cs: IO port probe 0x3e0-0x4ff: clean.
[172825.174874] cs: IO port probe 0x820-0x8ff: clean.
[172825.175276] cs: IO port probe 0xc00-0xcf7: clean.
[172825.175970] cs: IO port probe 0xa00-0xaff: clean.
[172825.714437] ts: Compaq touchscreen protocol output
[172825.898753] irda_init()
[172825.898803] NET: Registered protocol family 23
[172825.931627] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
[172825.931668] nsc-ircc, chip->init
[172825.931678] nsc-ircc, Found chip at base=0x02e
[172825.931714] nsc-ircc, driver loaded (Dag Brattli)
[172825.931732] nsc_ircc_open(), can't get iobase of 0x2f8
[172825.931761] nsc-ircc, Found chip at base=0x02e
[172825.931796] nsc-ircc, driver loaded (Dag Brattli)
[172825.931807] nsc_ircc_open(), can't get iobase of 0x2f8
[172825.938249] pnp: Device 00:0e disabled.
[172826.659025] lp0: using parport0 (interrupt-driven).
[172826.840441] Adding 1188768k swap on /dev/hda1.  Priority:-1 extents:1 across:1188768k
[172827.689695] NET: Registered protocol family 17
[172828.354779] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[172828.354795] md: bitmap version 4.39
[172829.752945] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[172830.848105] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
[172830.848126] hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[172830.848141] ide: failed opcode was: unknown
[172830.848321] cdrom: open failed.
[172836.137691] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
[172836.905088] ReiserFS: hda3: using ordered data mode
[172836.927703] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[172836.933075] ReiserFS: hda3: checking transaction log (hda3)
[172836.991461] ReiserFS: hda3: Using r5 hash to sort names
[172859.166123] ppdev: user-space parallel port driver
[172859.693033] IBM machine detected. Enabling interrupts during APM calls.
[172859.693952] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[172861.542000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[172861.542026] hdc: drive_cmd: error=0x04 { AbortedCommand }
[172861.542037] ide: failed opcode was: 0xec
[172864.647988] ttyS1: LSR safety check engaged!
[172869.122281] Non-volatile memory driver v1.2
[172869.153931] input: /usr/sbin/thinkpad-keys as /class/input/input3
[172869.995912] Bluetooth: Core ver 2.8
[172869.995934] NET: Registered protocol family 31
[172869.995942] Bluetooth: HCI device and connection manager initialized
[172869.995972] Bluetooth: HCI socket layer initialized
[172870.126863] Bluetooth: L2CAP ver 2.8
[172870.126883] Bluetooth: L2CAP socket layer initialized
[172870.175150] Bluetooth: RFCOMM socket layer initialized
[172870.175200] Bluetooth: RFCOMM TTY layer initialized
[172870.175209] Bluetooth: RFCOMM ver 1.7
[172885.331622] NET: Registered protocol family 10
[172885.331994] lo: Disabled Privacy Extensions
[172885.332171] ADDRCONF(NETDEV_UP): eth0: link is not ready
[172885.332288] IPv6 over IPv4 tunneling driver
[172932.526600] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[172932.527033] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[172940.523229] e100: eth0: e100_watchdog: link down
[172956.516243] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[172956.516639] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[172974.148413] eth0: no IPv6 routers present
[172982.505096] e100: eth0: e100_watchdog: link down
[172994.499834] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[172994.500273] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[173000.497325] e100: eth0: e100_watchdog: link down
[173004.915128] eth0: no IPv6 routers present
[173008.493787] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[173030.707997] eth0: no IPv6 routers present
[173794.154537] e100: eth0: e100_watchdog: link down
[173798.152730] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[173798.153125] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[173814.157618] eth0: no IPv6 routers present
[173974.076829] e100: eth0: e100_watchdog: link down
[173976.075882] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[173976.076313] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[173994.955520] eth0: no IPv6 routers present
[174479.858376] e100: eth0: e100_watchdog: link down
[174733.748638] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[174733.749074] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[174739.746130] e100: eth0: e100_watchdog: link down
[174744.283878] eth0: no IPv6 routers present
[174745.743457] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[174765.702639] eth0: no IPv6 routers present
[177525.390721] usb 1-1: new full speed USB device using uhci_hcd and address 2
[177526.705766] SCSI subsystem initialized
[177526.799501] Initializing USB Mass Storage driver...
[177526.800932] scsi0 : SCSI emulation for USB Mass Storage devices
[177526.801655] usb-storage: device found at 2
[177526.801668] usb-storage: waiting for device to settle before scanning
[177526.801701] usbcore: registered new driver usb-storage
[177526.801711] USB Mass Storage support registered.
[177528.537629] e100: eth0: e100_watchdog: link down
[177530.536699] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[177530.537096] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[177531.800628]   Vendor: Kingston  Model: DataTraveler II   Rev: 1.13
[177531.800672]   Type:   Direct-Access                      ANSI SCSI revision: 00
[177531.824001] usb-storage: device scan complete
[177531.953691] Driver 'sd' needs updating - please use bus_type methods
[177532.307214] SCSI device sda: 2014208 512-byte hdwr sectors (1031 MB)
[177532.310230] sda: Write Protect is off
[177532.310417] sda: Mode Sense: 23 00 00 00
[177532.310427] sda: assuming drive cache: write through
[177532.327207] SCSI device sda: 2014208 512-byte hdwr sectors (1031 MB)
[177532.331207] sda: Write Protect is off
[177532.331406] sda: Mode Sense: 23 00 00 00
[177532.331416] sda: assuming drive cache: write through
[177532.331431]  sda: sda1
[177532.338988] sd 0:0:0:0: Attached scsi removable disk sda
[177532.414839] sd 0:0:0:0: Attached scsi generic sg0 type 0
[177532.535920] e100: eth0: e100_watchdog: link down
[177533.852902] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[177536.534111] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[177551.871273] eth0: no IPv6 routers present
[188148.792596] atkbd.c: Unknown key released (translated set 2, code 0x7f on isa0060/serio0).
[188148.792616] atkbd.c: Use 'setkeycodes 7f <keycode>' to make it known.
[189977.872429] pccard: CardBus card inserted into slot 0
[189979.341268] ieee80211_crypt: registered algorithm 'NULL'
[189979.442986] ieee80211: 802.11 data/management/control stack, git-1.1.7
[189979.443290] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[189979.946405] bcm43xx driver
[189979.947948] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[189979.948243] PCI: Setting latency timer of device 0000:02:00.0 to 64
[189980.372693] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[189980.899932] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[189980.921802] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[189985.289403] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[190010.362979] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
shannon@MTIA20MLNX:~$