rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ff00000 (usable)
[ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65280) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65280
[ 0.000000] HighMem 65280 -> 65280
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65280
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 478 pages used for memmap
[ 0.000000] Normal zone: 60706 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efb00000)
[ 0.000000] Built 1 zonelists. Total pages: 64770
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0120c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1102.565 MHz processor.
[ 19.890550] Console: colour VGA+ 80x25
[ 19.891868] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.892863] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 19.933727] Memory: 247180k/261120k available (2015k kernel code, 13436k reserved, 916k data, 364k init, 0k highmem)
[ 19.933752] virtual kernel memory layout:
[ 19.933755] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 19.933758] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.933761] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 19.933763] lowmem : 0xc0000000 - 0xcff00000 ( 255 MB)
[ 19.933766] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 19.933769] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 19.933771] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 19.933779] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 19.933923] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 20.013908] Calibrating delay using timer specific routine.. 2206.80 BogoMIPS (lpj=4413617)
[ 20.014030] Security Framework v1.0.0 initialized
[ 20.014074] SELinux: Disabled at boot.
[ 20.014122] Mount-cache hash table entries: 512
[ 20.014649] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 20.014679] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 20.014685] CPU: L2 cache: 256K
[ 20.014696] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 20.014736] Compat vDSO mapped to ffffe000.
[ 20.014780] Checking 'hlt' instruction... OK.
[ 20.030243] SMP alternatives: switching to UP code
[ 20.030971] Freeing SMP alternatives: 11k freed
[ 20.031947] Early unpacking initramfs... done
[ 20.875529] ACPI: Core revision 20070126
[ 20.875748] ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126]
[ 20.875759] ACPI: Unable to load the System Description Tables
[ 20.876016] CPU0: Intel(R) Celeron(TM) CPU 1100MHz stepping 01
[ 20.876036] SMP motherboard not detected.
[ 20.876043] Local APIC not detected. Using dummy APIC emulation.
[ 20.876248] Brought up 1 CPUs
[ 20.876922] Booting paravirtualized kernel on bare hardware
[ 20.877183] Time: 13:58:47 Date: 11/29/107
[ 20.877450] NET: Registered protocol family 16
[ 20.878139] EISA bus registered
[ 20.902696] PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
[ 20.902706] PCI: Using configuration type 1
[ 20.902712] Setting up standard PCI resources
[ 20.905657] ACPI: Interpreter disabled.
[ 20.905678] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.905707] pnp: PnP ACPI: disabled
[ 20.905719] PnPBIOS: Scanning system for PnP BIOS support...
[ 20.905956] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbc70
[ 20.905964] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbca0, dseg 0xf0000
[ 20.908535] PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
[ 20.908755] PCI: Probing PCI hardware
[ 20.908776] PCI: Probing PCI hardware (bus 00)
[ 20.909446] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 20.909461] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 20.910074] PCI: Transparent bridge - 0000:00:1e.0
[ 20.911554] PCI: Using IRQ router PIIX/ICH [8086/2410] at 0000:00:1f.0
[ 20.920846] NET: Registered protocol family 8
[ 20.920856] NET: Registered protocol family 20
[ 20.921197] Time: tsc clocksource has been installed.
[ 20.921468] pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
[ 20.921480] pnp: 00:08: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 20.921487] pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 20.921493] pnp: 00:08: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 20.921514] pnp: 00:09: iomem range 0xf0000-0xf3fff could not be reserved
[ 20.921520] pnp: 00:09: iomem range 0xf4000-0xf7fff could not be reserved
[ 20.921526] pnp: 00:09: iomem range 0xf8000-0xfffff could not be reserved
[ 20.921532] pnp: 00:09: iomem range 0xca000-0xcffff has been reserved
[ 20.922480] PCI: Bridge: 0000:00:1e.0
[ 20.922490] IO window: c000-cfff
[ 20.922503] MEM window: e4000000-e40fffff
[ 20.922510] PREFETCH window: disabled.
[ 20.922542] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 20.922593] NET: Registered protocol family 2
[ 20.961408] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 20.961638] TCP established hash table entries: 8192 (order: 4, 98304 bytes)
[ 20.962431] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 20.963031] TCP: Hash tables configured (established 8192 bind 8192)
[ 20.963041] TCP reno registered
[ 20.973710] checking if image is initramfs... it is
[ 22.441564] Freeing initrd memory: 7305k freed
[ 22.443572] audit: initializing netlink socket (disabled)
[ 22.443632] audit(1198936728.492:1): initialized
[ 22.450292] VFS: Disk quotas dquot_6.5.1
[ 22.450620] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.451246] io scheduler noop registered
[ 22.451257] io scheduler anticipatory registered
[ 22.451262] io scheduler deadline registered
[ 22.451334] io scheduler cfq registered (default)
[ 22.451398] Boot video device is 0000:00:01.0
[ 22.452093] isapnp: Scanning for PnP cards...
[ 22.805863] isapnp: No Plug & Play device found
[ 22.914000] Real Time Clock Driver v1.12ac
[ 22.914248] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.914468] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.915130] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.917357] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.918317] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.920949] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.921853] input: Macintosh mouse button emulation as /class/input/input0
[ 22.922187] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 22.924458] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.924480] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.925062] mice: PS/2 mouse device common for all mice
[ 22.925397] EISA: Probing bus 0 at eisa.0
[ 22.925460] EISA: Detected 0 cards.
[ 22.925907] TCP cubic registered
[ 22.925970] NET: Registered protocol family 1
[ 22.926073] Using IPI No-Shortcut mode
[ 22.926353] Magic number: 3:39:990
[ 22.926381] hash matches device ttyd3
[ 22.929983] Freeing unused kernel memory: 364k freed
[ 22.999869] input: AT Translated Set 2 keyboard as /class/input/input1
[ 24.625212] AppArmor: AppArmor initialized<5>audit(1198936730.492:2): type=1505 info="AppArmor initialized" pid=1122
[ 24.653879] fuse init (API version 7.8)
[ 24.675927] Failure registering capabilities with primary security module.
[ 24.752675] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 27.582875] SCSI subsystem initialized
[ 27.679334] libata version 2.21 loaded.
[ 27.692763] ata_piix 0000:00:1f.1: version 2.11
[ 27.693060] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 27.693483] scsi0 : ata_piix
[ 27.693663] scsi1 : ata_piix
[ 27.693725] ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 27.693732] ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 27.750019] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 27.857073] ata1.00: ATA-6: SAMSUNG SV0412H, SK100-13, max UDMA/100
[ 27.857090] ata1.00: 78242976 sectors, multi 16: LBA
[ 27.873045] ata1.00: configured for UDMA/66
[ 27.882932] usbcore: registered new interface driver usbfs
[ 27.883022] usbcore: registered new interface driver hub
[ 27.883111] usbcore: registered new device driver usb
[ 27.887303] USB Universal Host Controller Interface driver v3.0
[ 28.212982] Floppy drive(s): fd0 is 1.44M
[ 28.326316] FDC 0 is a post-1991 82077
[ 28.355641] ata2.00: ATAPI: SAMSUNG CD-ROM SC-152A, CA03, max MWDMA2
[ 28.355678] ata2.01: ATAPI: TSSTcorpCD-R/RW SH-R522C, TS05, max UDMA/33
[ 28.467159] end_request: I/O error, dev fd0, sector 0
[ 28.527378] ata2.00: configured for MWDMA2
[ 28.691161] ata2.01: configured for UDMA/33
[ 28.691717] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SV0412H SK10 PQ: 0 ANSI: 5
[ 28.692880] scsi 1:0:0:0: CD-ROM SAMSUNG CD-ROM SC-152A CA03 PQ: 0 ANSI: 5
[ 28.696834] scsi 1:0:1:0: CD-ROM TSSTcorp CD-R/RW SH-R522C TS05 PQ: 0 ANSI: 5
[ 28.697528] 8139cp 0000:01:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 28.697542] 8139cp 0000:01:00.0: Try the "8139too" driver instead.
[ 28.704097] 8139too Fast Ethernet driver 0.9.28
[ 28.704824] eth0: RealTek RTL8139 at 0xd080e000, 00:c0:a8:8d:b0:92, IRQ 11
[ 28.704830] eth0: Identified 8139 chip type 'RTL-8139C'
[ 28.705218] PCI: setting IRQ 9 as level-triggered
[ 28.705226] PCI: Found IRQ 9 for device 0000:00:1f.2
[ 28.705269] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 28.705277] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 28.705790] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 28.705851] uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000d000
[ 28.706335] usb usb1: configuration #1 chosen from 1 choice
[ 28.706428] hub 1-0:1.0: USB hub found
[ 28.706467] hub 1-0:1.0: 2 ports detected
[ 28.760225] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 28.760281] sd 0:0:0:0: [sda] Write Protect is off
[ 28.760288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.760326] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.760577] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 28.760598] sd 0:0:0:0: [sda] Write Protect is off
[ 28.760603] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.760633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.760663] sda: sda1 sda2 sda3 < sda5 > sda4
[ 28.847356] sd 0:0:0:0: [sda] Attached SCSI disk
[ 28.865849] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 28.866592] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 28.867229] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 28.942961] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 28.942987] Uniform CD-ROM driver Revision: 3.20
[ 28.944314] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 28.966354] sr1: scsi3-mmc drive: 32x/40x writer cd/rw xa/form2 cdda tray
[ 28.967643] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 29.554284] end_request: I/O error, dev fd0, sector 0
[ 29.984651] kjournald starting. Commit interval 5 seconds
[ 29.984714] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.095499] kjournald starting. Commit interval 5 seconds
[ 30.095576] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.585297] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 30.628072] ISO 9660 Extensions: RRIP_1991A
[ 30.874705] Registering unionfs 1.4
[ 30.874724] unionfs: debugging is not enabled
[ 30.952604] loop: module loaded
[ 31.178666] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
[ 110.264408] Linux agpgart interface v0.102 (c) Dave Jones
[ 110.322817] agpgart: Detected an Intel i810 Chipset.
[ 110.337358] agpgart: AGP aperture is 64M @ 0xe0000000
[ 110.817160] i810_smbus 0000:00:01.0: i810/i815 i2c device found.
[ 110.876809] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 110.908225] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 110.952710] iTCO_vendor_support: vendor-support=0
[ 111.122357] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 111.122613] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 111.122630] iTCO_wdt: No card detected
[ 111.179698] intel_rng: FWH not detected
[ 112.295193] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 112.394525] input: PC Speaker as /class/input/input3
[ 113.503507] parport_pc 00:0e: reported by Plug and Play BIOS
[ 113.503586] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 114.025750] PCI: setting IRQ 5 as level-triggered
[ 114.025768] PCI: Found IRQ 5 for device 0000:00:1f.5
[ 114.025792] PCI: Sharing IRQ 5 with 0000:00:1f.3
[ 114.025868] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 114.618007] intel8x0_measure_ac97_clock: measured 54367 usecs
[ 114.618024] intel8x0: clocking to 48000
[ 117.587048] Adding 746980k swap on /dev/sda5. Priority:-1 extents:1 across:746980k