rendered paste bodyivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.3 (tagged release) loading
ivtv: Linux version: 2.6.16-gentoo-r12 SMP gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 21 sharing vector 0xD9 and IRQ 21
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 217
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Failed to load module tveeprom
tveeprom 0-0050: Hauppauge model 26052, rev C199, serial# 8165085
tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has no radio, has IR remote
ivtv0: Failed to load module tuner
ivtv0: Failed to load module tda9887
ivtv0: Failed to load module cx25840
ivtv0: Failed to load module wm8775
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 0-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
GSI 22 sharing vector 0xE1 and IRQ 22
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 225
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: Failed to load module tveeprom
tveeprom 1-0050: Hauppauge model 26052, rev G1B2, serial# 8848161
tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 4)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has no radio, has IR remote
ivtv1: Failed to load module tuner
ivtv1: Failed to load module tda9887
ivtv1: Failed to load module cx25840
ivtv1: Failed to load module wm8775
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
ivtv1: Initialized Hauppauge WinTV PVR-150, card #1
ivtv: ==================== END INIT IVTV ====================