rendered paste bodyLinux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 17:17:36 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable)
BIOS-e820: 0000000013ff0000 - 0000000013ff0800 (ACPI NVS)
BIOS-e820: 0000000013ff0800 - 0000000014000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
319MB LOWMEM available.
On node 0 totalpages: 81904
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 77808 pages, LIFO batch:15
DMI not present or invalid.
ACPI: RSDP (v000 FICinc ) @ 0x000f7d40
ACPI: RSDT (v001 FICinc AWRDACPI 0x00000000 0x00000000) @ 0x13ff0800
ACPI: FADT (v001 FICinc AWRDACPI 0x00000000 0x00000000) @ 0x13ff0840
ACPI: DSDT (v001 FICINC AWRDACPI 0x00001000 MSFT 0x01000004) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 20000000 (gap: 14000000:ebff0000)
Detected 334.101 MHz processor.
Built 1 zonelists. Total pages: 81904
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0128a000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 320180k/327616k available (1544k kernel code, 6804k reserved, 577k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 669.03 BogoMIPS (lpj=1338069)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 1c00)
CPU0: Intel Pentium II (Deschutes) stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 1159k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region 4000-403f claimed by PIIX4 ACPI
PCI quirk: region 5f00-5f0f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: e2000000-e3ffffff
PREFETCH window: e4000000-e5ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1198351982.244:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
00:08: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
00:09: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 196k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
hda: WDC AC32500H, ATA DISK drive
hda: Disabling (U)DMA for WDC AC32500H (blacklisted)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG SP0802N, ATA DISK drive
hdd: ST340016A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 4999680 sectors (2559 MB) w/128KiB Cache, CHS=4960/16/63
hda: hda1 hda2
hdc: max request size: 512KiB
hdc: Host Protected Area detected.
current capacity is 66055248 sectors (33820 MB)
native capacity is 156368016 sectors (80060 MB)
hdc: Host Protected Area disabled.
hdc: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
hdc: cache flushes supported
hdc:<4>hdc: dma_timer_expiry: dma status == 0x61
hdc: DMA timeout error
hdc: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc1
hdd: max request size: 128KiB
hdd: Host Protected Area detected.
current capacity is 66055248 sectors (33820 MB)
native capacity is 78165360 sectors (40020 MB)
hdd: Host Protected Area disabled.
hdd: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hdd: cache flushes not supported
hdd: hdd1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 32M @ 0xe0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:08.0: 3Com PCI 3c905C Tornado at d481e000.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
0000:00:09.0: 3Com PCI 3c905C Tornado at d488e000.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
eth2: RealTek RTL8139 at 0xec00, 00:a1:b0:a2:81:f0, IRQ 10
eth2: Identified 8139 chip type 'RTL-8139B'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
input: PC Speaker as /class/input/input1
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
nvidiafb: Device ID: 10de002d
nvidiafb: EDID found from BUS1
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 100x37
nvidiafb: PCI nVidia NV2 framebuffer (32MB @ 0xE4000000)
hdc: dma_timer_expiry: dma status == 0x61
hdc: DMA timeout error
hdc: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: dma_timer_expiry: dma status == 0x61
hdc: DMA timeout error
hdc: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: dma_timer_expiry: dma status == 0x61
hdc: DMA timeout error
hdc: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
Adding 157240k swap on /dev/hda2. Priority:-1 extents:1 across:157240k
EXT3 FS on hda1, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
eth0: setting full-duplex.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth1: setting full-duplex.
eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
eth1: no IPv6 routers present
eth2: no IPv6 routers present
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (2559 buckets, 20472 max) - 224 bytes per conntrack
eth0: Setting promiscuous mode.
device eth0 entered promiscuous mode
audit(1198352197.226:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
eth1: Setting promiscuous mode.
device eth1 entered promiscuous mode
audit(1198352197.306:3): dev=eth1 prom=256 old_prom=0 auid=4294967295
eth2: Promiscuous mode enabled.
device eth2 entered promiscuous mode
audit(1198352197.362:4): dev=eth2 prom=256 old_prom=0 auid=4294967295
HTB: quantum of class 10002 is small. Consider r2q change.
HTB: quantum of class 10003 is small. Consider r2q change.
HTB: quantum of class 10004 is small. Consider r2q change.
HTB: quantum of class 10005 is small. Consider r2q change.
HTB: quantum of class 10006 is small. Consider r2q change.
HTB: quantum of class 10007 is small. Consider r2q change.
HTB: quantum of class 10008 is small. Consider r2q change.
HTB: quantum of class 10009 is small. Consider r2q change.
HTB: quantum of class 10010 is small. Consider r2q change.
HTB: quantum of class 10011 is small. Consider r2q change.
HTB: quantum of class 10012 is small. Consider r2q change.
HTB: quantum of class 10013 is small. Consider r2q change.
HTB: quantum of class 10014 is small. Consider r2q change.
HTB: quantum of class 10015 is small. Consider r2q change.
HTB: quantum of class 10016 is small. Consider r2q change.
HTB: quantum of class 10017 is small. Consider r2q change.
HTB: quantum of class 10018 is small. Consider r2q change.
HTB: quantum of class 10019 is small. Consider r2q change.
HTB: quantum of class 10020 is small. Consider r2q change.
HTB: quantum of class 10021 is small. Consider r2q change.
HTB: quantum of class 10022 is small. Consider r2q change.
HTB: quantum of class 10023 is small. Consider r2q change.
HTB: quantum of class 10002 is small. Consider r2q change.
HTB: quantum of class 10003 is small. Consider r2q change.
HTB: quantum of class 10004 is small. Consider r2q change.
HTB: quantum of class 10005 is small. Consider r2q change.
HTB: quantum of class 10006 is small. Consider r2q change.
HTB: quantum of class 10007 is small. Consider r2q change.
HTB: quantum of class 10008 is small. Consider r2q change.
HTB: quantum of class 10009 is small. Consider r2q change.
HTB: quantum of class 10010 is small. Consider r2q change.
HTB: quantum of class 10011 is small. Consider r2q change.
HTB: quantum of class 10012 is small. Consider r2q change.
HTB: quantum of class 10013 is small. Consider r2q change.
HTB: quantum of class 10014 is small. Consider r2q change.
HTB: quantum of class 10015 is small. Consider r2q change.
HTB: quantum of class 10016 is small. Consider r2q change.
HTB: quantum of class 10017 is small. Consider r2q change.
HTB: quantum of class 10018 is small. Consider r2q change.
HTB: quantum of class 10019 is small. Consider r2q change.
HTB: quantum of class 10020 is small. Consider r2q change.
HTB: quantum of class 10021 is small. Consider r2q change.
HTB: quantum of class 10022 is small. Consider r2q change.
HTB: quantum of class 10023 is small. Consider r2q change.