rendered paste bodyCobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................0M
7.Bank 2:.................................64M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**Unknown Card**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing done
Executing bootloader kernel...
Jump_to_Real_Kernel: disk error, trying BFD again
BOOTLOADER ramcode: selected partition /dev/hdc1
Decompressing - done
Executing bootloader kernel...
Jump_to_Real_Kernel: disk error, trying BFD again
get_root_dev: nr_boot_failures 0x00000002 exceeds maxtries 0x00000002 for boot_i
ndex 0x00000000
*** halting ***
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................0M
7.Bank 2:.................................64M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**Unknown Card**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing done
Executing bootloader kernel...
Jump_to_Real_Kernel: disk error, trying BFD again
BOOTLOADER ramcode: selected partition /dev/hdc1
Decompressing - done
Executing bootloader kernel...
Jump_to_Real_Kernel: disk error, trying BFD again
get_root_dev: nr_boot_failures 0x00000002 exceeds maxtries 0x00000002 for boot_i
ndex 0x00000000
*** halting ***
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................0M
7.Bank 2:.................................64M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**Unknown Card**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing done
Executing bootloader kernel...
Jump_to_Real_Kernel: disk error, trying BFD again
BOOTLOADER ramcode: selected partition /dev/hdc1
Decompressing - done
Executing bootloader kernel...
Jump_to_Real_Kernel: disk error, trying BFD again
get_root_dev: nr_boot_failures 0x00000002 exceeds maxtries 0x00000002 for boot_i
ndex 0x00000000
*** halting ***
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................0M
7.Bank 2:.................................64M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**Unknown Card**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing done
Executing bootloader kernel...
Jump_to_Real_Kernel: disk error, trying BFD again
BOOTLOADER ramcode: selected partition /dev/hdc1
Decompressing - done
Executing bootloader kernel...
Jump_to_Real_Kernel: disk error, trying BFD again
get_root_dev: nr_boot_failures 0x00000002 exceeds maxtries 0x00000002 for boot_i
ndex 0x00000000
*** halting ***
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................0M
7.Bank 2:.................................64M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**Unknown Card**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing done
Executing bootloader kernel...
Decompressing - done.
[ "CoLo" v1.21 ]
stage2: 87fa0000-88000000
cpu: clock 250.000MHz
pci: unit type <Qube2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:86:3d}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> mount
ide: {IBM-DPTA-371020}
ide: LBA 20028960
ide: supports PIO mode 4
ide: mode 4 timing
ide: partition 1
ext2: revision 0
1> lcd 'Booting...' /dev/{mounted-volume}
1> -load /boot/default.colo
ext2: {boot/default.colo} --> {./default.colo}
00000153 339t
1> -script
2> lcd "Mounting hda1"
2> mount hda1
ext2: revision 0
2> select "Which Kernel?" 50 Working New
2> goto {menu-option}
2> var image-name vmlinux.gz.working
2> goto 2f
2> lcd "Loading Linux" {image-name}
2> load /{image-name}
ext2: {vmlinux.gz.working} --> {vmlinux-2.6.16.4.gz}
00144915 1329429t
2> lcd "Booting..."
2> execute root=/dev/hda5 ro console=ttyS0,115200
inflate: decompressing
elf64: 00080000 - 003a101f (ffffffff.8034b000) (ffffffff.80000000)
elf64: ffffffff.80080000 (80080000) 3088518t + 192410t
Linux version 2.6.16.4-mipsgit-20060320-qube (stuartl@beast) (gcc version 3.4.4
(Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 Thu Apr 20 14:40:23 EST 2006
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 5
Determined physical RAM map:
memory: 0000000008000000 @ 0000000000000000 (usable)
Built 1 zonelists
Kernel command line: root=/dev/hda5 ro console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (32 instructions).
Synthesized TLB load handler fastpath (46 instructions).
Synthesized TLB store handler fastpath (46 instructions).
Synthesized TLB modify handler fastpath (45 instructions).
PID hash table entries: 1024 (order: 10, 32768 bytes)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Memory: 124984k/131072k available (2293k kernel code, 5936k reserved, 563k data,
160k init, 0k highmem)
Mount-cache hash table entries: 256
Checking for 'wait' instruction... available.
Checking for the multiply/shift bug... no.
Checking for the daddi bug... no.
Checking for the daddiu bug... no.
NET: Registered protocol family 16
Galileo: fixed bridge class
Galileo: revision 17
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
Real Time Clock Driver v1.12a
Cobalt LCD Driver v2.10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xc800000 (irq = 21) is a ST16650V2
Linux Tulip driver version 1.1.13 (December 15, 2004)
PCI: Enabling device 0000:00:07.0 (0045 -> 0047)
tulip0: Old format EEPROM on 'Cobalt Microserver' board. Using substitute media
control info.
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth0: Digital DS21142/DS21143 Tulip rev 65 at ffffffffb0001400, 00:10:E0:00:86:3
D, IRQ 19.
PCI: Enabling device 0000:00:0c.0 (0005 -> 0007)
tulip1: Old format EEPROM on 'Cobalt Microserver' board. Using substitute media
control info.
tulip1: EEPROM default media type Autosense.
tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21142/DS21143 Tulip rev 65 at ffffffffb0001480, 00:10:E0:00:87:A
F, IRQ 20.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DPTA-371020, ATA DISK drive
isa bounce pool size: 16 pages
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IRQ probe failed (0xffffffffff1bbefa)
hdc: IRQ probe failed (0xffffffffff1bbefa)
hdc: no response (status = 0xa1), resetting drive
hdc: IRQ probe failed (0xffffffffff1bbefa)
hdc: no response (status = 0xa1)
hdd: IRQ probe failed (0xffffffffff1bbefa)
hdd: IRQ probe failed (0xffffffffff1bbefa)
hdd: no response (status = 0xa1), resetting drive
hdd: IRQ probe failed (0xffffffffff1bbefa)
hdd: no response (status = 0xa1)
hdc: IRQ probe failed (0xffffffffff1bbefa)
hdc: IRQ probe failed (0xffffffffff1bbefa)
hdc: no response (status = 0xa1), resetting drive
hdc: IRQ probe failed (0xffffffffff1bbefa)
hdc: no response (status = 0xa1)
hdd: IRQ probe failed (0xffffffffff1bbefa)
hdd: IRQ probe failed (0xffffffffff1bbefa)
hdd: no response (status = 0xa1), resetting drive
hdd: IRQ probe failed (0xffffffffff1bbefa)
hdd: no response (status = 0xa1)
hda: max request size: 128KiB
hda: 20028960 sectors (10254 MB) w/1961KiB Cache, CHS=19870/16/63
hda: cache flushes not supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda5: orphan cleanup on readonly fs
EXT3-fs: hda5: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k freed
INIT: version 2.86 booting
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2005 Gentoo Foundation; Distributed under the GPLv2
* Mounting proc at /proc ... [ ok ]
* Mounting sysfs at /sys ... [ ok ]
* Mounting /dev for udev ... [ ok ]
* Configuring system to use udev ...
* Populating /dev with device nodes ...
* Setting /sbin/udevsend as hotplug agent ...
[ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Activating (possible) swap ...Adding 524276k swap on /dev/hda10. Priority:-1
extents:1 across:524276k
[ ok ]
* Skipping root filesystem check (fstab's passno == 0) ... [ ok ]
* Remounting root filesystem read/write ... [ ok ]
* You should stop using /etc/hostname and use /etc/conf.d/hostname
* Setting hostname to qube ... [ ok ]
* Calculating module dependencies ... * System.map not found - unable to check
symbols
[ ok ]
* Using /etc/modules.autoload as config:
* Loading module aic7xxx ... [ ok ]
* Autoloaded 1 module(s)
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Activating (possibly) more swap ... [ ok ]
Writing LCD: Invalid argument
Writing LCD: Invalid argument