rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
[ 0.000000] BIOS-e820: 000000007fe80000 - 000000007fe99000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe99000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f68f0
[ 0.000000] Entering add_active_range(0, 0, 523904) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523904
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523904
[ 0.000000] On node 0 totalpages: 523904
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 292227 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6820 checksum 0
[ 0.000000] ACPI: RSDP 000F6820, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 7FE8E860, 0044 (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7FE98CAA, 0074 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: DSDT 7FE8F220, 9A8A (r1 INTEL CALISTGA 6040000 MSFT 2000002)
[ 0.000000] ACPI: FACS 7FE99FC0, 0040
[ 0.000000] ACPI: APIC 7FE98D1E, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 7FE98D86, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7FE98DBE, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: APIC 7FE98DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FE98E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 7FE98E8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer 0)
[ 0.000000] ACPI: SSDT 7FE8E8A4, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists. Total pages: 519811
[ 0.000000] Kernel command line: root=UUID=b187347e-79ab-4d95-a650-3af563f11c89 ro quiet vga=792 splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1666.888 MHz processor.
[ 14.653813] Console: colour dummy device 80x25
[ 14.654060] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 14.654415] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.770545] Memory: 2066096k/2095616k available (2015k kernel code, 28184k reserved, 916k data, 364k init, 1178112k highmem)
[ 14.770555] virtual kernel memory layout:
[ 14.770556] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 14.770558] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.770559] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 14.770560] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 14.770562] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 14.770563] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 14.770564] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 14.770568] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.770607] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 14.770757] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 14.770762] hpet0: 3 64-bit timers, 14318180 Hz
[ 14.851736] Calibrating delay using timer specific routine.. 3337.35 BogoMIPS (lpj=6674700)
[ 14.851760] Security Framework v1.0.0 initialized
[ 14.851768] SELinux: Disabled at boot.
[ 14.851782] Mount-cache hash table entries: 512
[ 14.851907] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 14.851916] monitor/mwait feature present.
[ 14.851918] using mwait in idle threads.
[ 14.851923] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 14.851925] CPU: L2 cache: 2048K
[ 14.851928] CPU: Physical Processor ID: 0
[ 14.851930] CPU: Processor Core ID: 0
[ 14.851932] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 14.851941] Compat vDSO mapped to ffffe000.
[ 14.851954] Checking 'hlt' instruction... OK.
[ 14.867847] SMP alternatives: switching to UP code
[ 14.868313] Early unpacking initramfs... done
[ 15.216538] ACPI: Core revision 20070126
[ 15.216624] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.222106] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
[ 15.222123] SMP alternatives: switching to SMP code
[ 15.222230] Booting processor 1/1 eip 3000
[ 15.232452] Initializing CPU#1
[ 15.311460] Calibrating delay using timer specific routine.. 3333.64 BogoMIPS (lpj=6667280)
[ 15.311467] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 15.311473] monitor/mwait feature present.
[ 15.311476] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.311478] CPU: L2 cache: 2048K
[ 15.311480] CPU: Physical Processor ID: 0
[ 15.311482] CPU: Processor Core ID: 1
[ 15.311484] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 15.312080] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
[ 15.312103] Total of 2 processors activated (6670.99 BogoMIPS).
[ 15.312299] ENABLING IO-APIC IRQs
[ 15.312501] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.459468] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 15.479474] Brought up 2 CPUs
[ 15.539673] migration_cost=35
[ 15.539810] Booting paravirtualized kernel on bare hardware
[ 15.539885] Time: 10:00:35 Date: 11/20/107
[ 15.539906] NET: Registered protocol family 16
[ 15.539989] EISA bus registered
[ 15.539994] ACPI: bus type pci registered
[ 15.540122] PCI: PCI BIOS revision 2.10 entry at 0xfd6f2, last bus=11
[ 15.540125] PCI: Using configuration type 1
[ 15.540127] Setting up standard PCI resources
[ 15.542831] ACPI: EC: Look up EC in DSDT
[ 15.543633] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 15.564451] ACPI: System BIOS is requesting _OSI(Linux)
[ 15.564454] ACPI: Please test with "acpi_osi=!Linux"
[ 15.564455] Please send dmidecode to linux-acpi@vger.kernel.org
[ 15.565296] ACPI: Interpreter enabled
[ 15.565299] ACPI: (supports S0 S3 S4 S5)
[ 15.565315] ACPI: Using IOAPIC for interrupt routing
[ 15.572326] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 15.572381] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.572391] PCI: Probing PCI hardware (bus 00)
[ 15.573103] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 15.573108] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 15.574373] PCI: Transparent bridge - 0000:00:1e.0
[ 15.574532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.574864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 15.575015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 15.575158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 15.575298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 15.575491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 15.580528] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 15.580644] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 15.580758] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 15.580870] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 15.580983] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 15.581096] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 15.581210] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 15.581324] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 15.581452] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.581462] pnp: PnP ACPI init
[ 15.581469] ACPI: bus type pnp registered
[ 15.585826] pnp: PnP ACPI: found 11 devices
[ 15.585829] ACPI: ACPI bus type pnp unregistered
[ 15.585832] PnPBIOS: Disabled by ACPI PNP
[ 15.585877] PCI: Using ACPI for IRQ routing
[ 15.585879] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.585885] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 15.585891] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 15.585894] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 15.585898] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[ 15.585902] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[ 15.585905] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[ 15.585909] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[ 15.585912] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[ 15.585916] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[ 15.585920] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3
[ 15.585923] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3
[ 15.585927] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3
[ 15.615956] NET: Registered protocol family 8
[ 15.615959] NET: Registered protocol family 20
[ 15.616029] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 15.616033] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 15.616036] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 15.616040] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 15.616046] pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 15.619288] Time: tsc clocksource has been installed.
[ 15.619302] Switched to high resolution mode on CPU 0
[ 15.619388] Switched to high resolution mode on CPU 1
[ 15.646393] PCI: Bridge: 0000:00:01.0
[ 15.646396] IO window: 2000-2fff
[ 15.646400] MEM window: c8100000-c81fffff
[ 15.646403] PREFETCH window: d0000000-d7ffffff
[ 15.646407] PCI: Bridge: 0000:00:1c.0
[ 15.646409] IO window: disabled.
[ 15.646415] MEM window: disabled.
[ 15.646419] PREFETCH window: disabled.
[ 15.646436] PCI: Bridge: 0000:00:1c.1
[ 15.646438] IO window: disabled.
[ 15.646444] MEM window: 8c000000-8c0fffff
[ 15.646448] PREFETCH window: disabled.
[ 15.646463] PCI: Bridge: 0000:00:1c.2
[ 15.646464] IO window: disabled.
[ 15.646470] MEM window: 8c100000-8c1fffff
[ 15.646475] PREFETCH window: disabled.
[ 15.646481] PCI: Bridge: 0000:00:1c.3
[ 15.646482] IO window: disabled.
[ 15.646488] MEM window: disabled.
[ 15.646492] PREFETCH window: disabled.
[ 15.646500] PCI: Bus 11, cardbus bridge: 0000:0a:09.0
[ 15.646502] IO window: 00003000-000030ff
[ 15.646508] IO window: 00003400-000034ff
[ 15.646513] PREFETCH window: 88000000-8bffffff
[ 15.646519] MEM window: 90000000-93ffffff
[ 15.646524] PCI: Bridge: 0000:00:1e.0
[ 15.646527] IO window: 3000-3fff
[ 15.646533] MEM window: c8400000-c84fffff
[ 15.646538] PREFETCH window: 88000000-8bffffff
[ 15.646555] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.646560] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.646583] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 15.646591] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.646613] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
[ 15.646617] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 15.646625] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 15.646647] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
[ 15.646652] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 15.646659] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 15.646683] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 15.646690] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 15.646704] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.646721] PCI: Enabling device 0000:0a:09.0 (0000 -> 0003)
[ 15.646726] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 15.646743] NET: Registered protocol family 2
[ 15.691235] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.691290] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 15.692341] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.692714] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.692717] TCP reno registered
[ 15.707355] checking if image is initramfs... it is
[ 16.397666] Freeing initrd memory: 7063k freed
[ 16.397786] Simple Boot Flag at 0x36 set to 0x1
[ 16.398278] audit: initializing netlink socket (disabled)
[ 16.398293] audit(1198144835.224:1): initialized
[ 16.398398] highmem bounce pool size: 64 pages
[ 16.400362] VFS: Disk quotas dquot_6.5.1
[ 16.400411] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.400505] io scheduler noop registered
[ 16.400507] io scheduler anticipatory registered
[ 16.400509] io scheduler deadline registered
[ 16.400524] io scheduler cfq registered (default)
[ 16.400631] Boot video device is 0000:01:00.0
[ 16.400714] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 16.400749] assign_interrupt_mode Found MSI capability
[ 16.400752] Allocate Port Service[0000:00:01.0:pcie00]
[ 16.400831] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.400887] assign_interrupt_mode Found MSI capability
[ 16.400890] Allocate Port Service[0000:00:1c.0:pcie00]
[ 16.400921] Allocate Port Service[0000:00:1c.0:pcie02]
[ 16.401018] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.401074] assign_interrupt_mode Found MSI capability
[ 16.401076] Allocate Port Service[0000:00:1c.1:pcie00]
[ 16.401112] Allocate Port Service[0000:00:1c.1:pcie02]
[ 16.401209] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.401265] assign_interrupt_mode Found MSI capability
[ 16.401268] Allocate Port Service[0000:00:1c.2:pcie00]
[ 16.401302] Allocate Port Service[0000:00:1c.2:pcie02]
[ 16.401399] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 16.401455] assign_interrupt_mode Found MSI capability
[ 16.401457] Allocate Port Service[0000:00:1c.3:pcie00]
[ 16.401488] Allocate Port Service[0000:00:1c.3:pcie02]
[ 16.401658] isapnp: Scanning for PnP cards...
[ 16.755478] isapnp: No Plug & Play device found
[ 16.778178] Real Time Clock Driver v1.12ac
[ 16.778402] hpet_resources: 0xfed00000 is busy
[ 16.778438] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.778692] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.779701] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 16.779913] input: Macintosh mouse button emulation as /class/input/input0
[ 16.779996] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 16.782529] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 16.783485] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.783490] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 16.783493] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 16.783496] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 16.783499] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 16.783671] mice: PS/2 mouse device common for all mice
[ 16.783873] EISA: Probing bus 0 at eisa.0
[ 16.783880] Cannot allocate resource for EISA slot 1
[ 16.783883] Cannot allocate resource for EISA slot 2
[ 16.783886] Cannot allocate resource for EISA slot 3
[ 16.783909] EISA: Detected 0 cards.
[ 16.784001] TCP cubic registered
[ 16.784016] NET: Registered protocol family 1
[ 16.784039] Using IPI No-Shortcut mode
[ 16.784196] Magic number: 3:560:22
[ 16.784509] Freeing unused kernel memory: 364k freed
[ 16.866591] input: AT Translated Set 2 keyboard as /class/input/input1
[ 17.999767] AppArmor: AppArmor initialized<5>audit(1198144836.724:2): type=1505 info="AppArmor initialized" pid=1241
[ 18.007935] fuse init (API version 7.8)
[ 18.013496] Failure registering capabilities with primary security module.
[ 18.049322] ACPI: SSDT 7FE8EFEF, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 18.049570] ACPI: SSDT 7FE8ED9A, 01D0 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 18.049897] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 18.049902] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 18.050145] ACPI: SSDT 7FE8F197, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 18.050374] ACPI: SSDT 7FE8EF6A, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 18.050735] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 18.050740] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 18.054684] ACPI: Thermal Zone [THRM] (69 C)
[ 3.168000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.172000] Time: hpet clocksource has been installed.
[ 3.584000] usbcore: registered new interface driver usbfs
[ 3.584000] usbcore: registered new interface driver hub
[ 3.584000] usbcore: registered new device driver usb
[ 3.584000] USB Universal Host Controller Interface driver v3.0
[ 3.584000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 3.584000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.584000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.584000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.584000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800
[ 3.584000] usb usb1: configuration #1 chosen from 1 choice
[ 3.584000] hub 1-0:1.0: USB hub found
[ 3.584000] hub 1-0:1.0: 2 ports detected
[ 3.684000] SCSI subsystem initialized
[ 3.688000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.688000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.688000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.688000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.688000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 3.688000] usb usb2: configuration #1 chosen from 1 choice
[ 3.688000] hub 2-0:1.0: USB hub found
[ 3.688000] hub 2-0:1.0: 2 ports detected
[ 3.688000] libata version 2.21 loaded.
[ 3.792000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.792000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.792000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.792000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.792000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 3.792000] usb usb3: configuration #1 chosen from 1 choice
[ 3.792000] hub 3-0:1.0: USB hub found
[ 3.792000] hub 3-0:1.0: 2 ports detected
[ 3.896000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.896000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.896000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.896000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.896000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 3.896000] usb usb4: configuration #1 chosen from 1 choice
[ 3.896000] hub 4-0:1.0: USB hub found
[ 3.896000] hub 4-0:1.0: 2 ports detected
[ 3.940000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 4.000000] Clocksource tsc unstable (delta = -161730218 ns)
[ 4.000000] tg3.c:v3.77 (May 31, 2007)
[ 4.000000] PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
[ 4.000000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.000000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 4.040000] eth0: Tigon3 [partno(BCM95789) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:36:80:b9:b3
[ 4.040000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 4.040000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.040000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[ 4.040000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.040000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.040000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.040000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.040000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.040000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xc8004000
[ 4.056000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.056000] usb usb5: configuration #1 chosen from 1 choice
[ 4.056000] hub 5-0:1.0: USB hub found
[ 4.056000] hub 5-0:1.0: 8 ports detected
[ 4.160000] ACPI: PCI Interrupt 0000:0a:09.1[A] -> GSI 20 (level, low) -> IRQ 20
[ 4.208000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c8405000-c84057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.208000] ata_piix 0000:00:1f.2: version 2.11
[ 4.208000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.364000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 4.364000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.364000] scsi0 : ata_piix
[ 4.364000] scsi1 : ata_piix
[ 4.364000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
[ 4.364000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
[ 4.464000] usb 1-1: device not accepting address 2, error -71
[ 4.544000] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[ 4.544000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.560000] ata1.00: configured for UDMA/100
[ 4.904000] ata2.00: ATAPI: PIONEER DVD-RW DVR-K06RS, 1.08, max UDMA/33
[ 5.144000] ata2.00: configured for UDMA/33
[ 5.144000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[ 5.152000] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K06RS 1.08 PQ: 0 ANSI: 5
[ 5.160000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 5.160000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.160000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.160000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.160000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 5.160000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.160000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.160000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.160000] sda: sda1 sda2 sda3 sda4
[ 5.180000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.184000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.184000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.224000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 5.224000] Uniform CD-ROM driver Revision: 3.20
[ 5.224000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.448000] usb 5-8: new high speed USB device using ehci_hcd and address 4
[ 5.592000] kjournald starting. Commit interval 5 seconds
[ 5.592000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.620000] usb 5-8: configuration #1 chosen from 1 choice
[ 5.860000] usb 1-1: new low speed USB device using uhci_hcd and address 4
[ 6.036000] usb 1-1: configuration #1 chosen from 1 choice
[ 6.276000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 6.444000] usb 3-1: configuration #1 chosen from 1 choice
[ 14.592000] intel_rng: FWH not detected
[ 14.628000] iTCO_vendor_support: vendor-support=0
[ 14.628000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 14.628000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 14.628000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.788000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.792000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.904000] Linux agpgart interface v0.102 (c) Dave Jones
[ 14.988000] ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) -> IRQ 20
[ 15.224000] Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0094]
[ 15.224000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 15.224000] Yenta: Routing CardBus interrupts to PCI
[ 15.224000] Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66
[ 15.388000] Bluetooth: Core ver 2.11
[ 15.388000] NET: Registered protocol family 31
[ 15.388000] Bluetooth: HCI device and connection manager initialized
[ 15.388000] Bluetooth: HCI socket layer initialized
[ 15.416000] irda_init()
[ 15.416000] NET: Registered protocol family 23
[ 15.452000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 15.460000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 15.460000] Socket status: 30000411
[ 15.460000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 15.460000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 15.460000] cs: IO port probe 0x3000-0x3fff: clean.
[ 15.460000] pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc84fffff
[ 15.460000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 15.476000] Linux video capture interface: v2.00
[ 15.496000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 15.500000] usbcore: registered new interface driver hiddev
[ 15.516000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
[ 15.516000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
[ 15.516000] usbcore: registered new interface driver usbhid
[ 15.516000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 15.564000] ieee80211_crypt: registered algorithm 'NULL'
[ 15.576000] Bluetooth: HCI USB driver ver 2.9
[ 15.580000] usbcore: registered new interface driver hci_usb
[ 15.676000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 15.696000] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 15.696000] [fglrx] ASYNCIO init succeed!
[ 15.700000] [fglrx] PAT is enabled successfully!
[ 15.700000] [fglrx] module loaded - fglrx 8.43.2 [Nov 9 2007] on minor 0
[ 15.760000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321)
[ 15.772000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 15.772000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 15.828000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 15.828000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 15.828000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[ 15.828000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 15.828000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 15.828000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 15.992000] usbcore: registered new interface driver gspca
[ 15.992000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 16.052000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 16.052000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 16.100000] pccard: PCMCIA card inserted into slot 0
[ 16.100000] cs: memory probe 0xc8400000-0xc84fffff: excluding 0xc8400000-0xc840ffff
[ 16.104000] pcmcia: registering new device pcmcia0.0
[ 16.140000] cs: IO port probe 0x100-0x3af: clean.
[ 16.144000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 16.144000] cs: IO port probe 0x820-0x8ff: clean.
[ 16.144000] cs: IO port probe 0xc00-0xcf7: clean.
[ 16.144000] cs: IO port probe 0xa00-0xaff: clean.
[ 16.704000] lp: driver loaded but no devices found
[ 17.468000] EXT3 FS on sda4, internal journal
[ 17.808000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[ 20.676000] ACPI: Battery Slot [BAT1] (battery present)
[ 20.816000] input: Power Button (FF) as /class/input/input4
[ 20.816000] ACPI: Power Button (FF) [PWRF]
[ 20.816000] input: Lid Switch as /class/input/input5
[ 20.816000] ACPI: Lid Switch [LID]
[ 20.816000] input: Power Button (CM) as /class/input/input6
[ 20.816000] ACPI: Power Button (CM) [PWRB]
[ 20.816000] input: Sleep Button (CM) as /class/input/input7
[ 20.816000] ACPI: Sleep Button (CM) [SLPB]
[ 20.976000] ACPI: ACPI Dock Station Driver
[ 21.096000] ACPI: AC Adapter [ACAD] (on-line)
[ 22.316000] ppdev: user-space parallel port driver
[ 22.676000] audit(1198141257.128:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5097 profile="/usr/sbin/cupsd"
[ 22.768000] apm: BIOS not found.
[ 22.804000] PM: Writing back config space on device 0000:04:00.0 at offset c (was effc0000, writing 0)
[ 24.248000] Failure registering capabilities with primary security module.
[ 24.448000] Bluetooth: L2CAP ver 2.8
[ 24.448000] Bluetooth: L2CAP socket layer initialized
[ 24.516000] Bluetooth: RFCOMM socket layer initialized
[ 24.516000] Bluetooth: RFCOMM TTY layer initialized
[ 24.516000] Bluetooth: RFCOMM ver 1.8
[ 27.172000] NET: Registered protocol family 10
[ 27.172000] lo: Disabled Privacy Extensions
[ 27.172000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.172000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 27.296000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.392000] [fglrx:firegl_init_pcie] *ERROR* Only power-of-two ring buffer size is supported for PCIe
[ 53.416000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (7)
[ 54.020000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (9)
[ 54.020000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (14)
[ 54.020000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (13)
[ 54.020000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (16)
[ 54.020000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (11)
[ 54.024000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (6)
[ 56.180000] NET: Registered protocol family 17
[ 59.304000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 74.680000] eth1: no IPv6 routers present
[ 5608.636000] atkbd.c: Unknown key pressed (translated set 2, code 0xa9 on isa0060/serio0).
[ 5608.636000] atkbd.c: Use 'setkeycodes e029 <keycode>' to make it known.
[ 5608.912000] atkbd.c: Unknown key released (translated set 2, code 0xa9 on isa0060/serio0).
[ 5608.912000] atkbd.c: Use 'setkeycodes e029 <keycode>' to make it known.
[ 5620.352000] atkbd.c: Unknown key pressed (translated set 2, code 0xa9 on isa0060/serio0).
[ 5620.352000] atkbd.c: Use 'setkeycodes e029 <keycode>' to make it known.
[ 5620.576000] atkbd.c: Unknown key released (translated set 2, code 0xa9 on isa0060/serio0).
[ 5620.576000] atkbd.c: Use 'setkeycodes e029 <keycode>' to make it known.
[ 5659.268000] [fglrx:firegl_init_pcie] *ERROR* Only power-of-two ring buffer size is supported for PCIe
[ 5669.348000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (7)
[ 5669.544000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (9)
[ 5669.544000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (14)
[ 5669.544000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (13)
[ 5669.544000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (16)
[ 5669.544000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (11)
[ 5669.544000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (6)