# dmesg
OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR
real mem = 1071640576 (1021MB)
avail mem = 1028538368 (980MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xee000 (47 entries)
bios0: vendor HP version "W04" date 04/06/2007
bios0: HP ProLiant DL320 G5
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x3400! 0xe6000/0x2000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 39 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
cpu0: Enhanced SpeedStep disabled by BIOS
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci3 at ppb2 bus 3
bge0 at pci3 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 16 (irq 11), address 00:1b:78:08:d3:48
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 17 (irq 11), address 00:1b:78:08:d3:49
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0
ppb3 at pci3 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 6
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci7 at ppb6 bus 7
vga1 at pci7 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci7 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci7 dev 4 function 2 not configured
uhci0 at pci7 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int 10 (ir q 10)
"Hewlett-Packard IPMI" rev 0x00 at pci7 dev 4 function 6 not configured
uhci0: cannot start
uhci0: init failed, error=13
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 c onfigured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DV-28E-N, C.6C> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 20 (irq 5) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
uhci0: host controller halted
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b