rendered paste body
asterisk1*CLI>
< [ 02 01 fc 30 08 02 10 00 05 04 03 80 90 a2 18 03 a9 83 81 1e 02 84 81 6c 02 21 a3 70 05 80 30 38 30 31 ]
asterisk1*CLI>
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 126 0: 0
< N(R): 024 P: 0
< 30 bytes of data
-- ACKing all packets from 23 to (but not including) 24
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=30
< Call Ref: len= 2 (reference 4096/0x1000) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
< [1e 02 84 81]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the remote user (4)
< Ext: 1 Progress Description: Call is not end-to-end ISDN; further call progress information may be available inband. (1) ]
< [6c 02 21 a3]
< Calling Number (len= 4) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation prohibited of network provided number (35) '' ]
< [70 05 80 30 38 30 31]
< Called Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '0801' ]
Sending Receiver Ready (127)
> [ 02 01 01 fe ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 127 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
> [ 00 01 30 fe 08 02 90 00 02 18 03 a9 83 81 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 024 0: 0
> N(R): 127 P: 0
> 10 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 4096/0x1000) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
-- Accepting call from '' to '0801' on channel 0/1, span 1
-- Executing Set("Zap/1-1", "DID=0801") in new stack
-- Executing Goto("Zap/1-1", "s|1") in new stack
-- Goto (from-zaptel,s,1)
-- Executing NoOp("Zap/1-1", "Entering from-zaptel with DID == 0801") in new stack
-- Executing Ringing("Zap/1-1", "") in new stack
> [ 00 01 32 fe 08 02 90 00 01 1e 02 81 88 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 025 0: 0
> N(R): 127 P: 0
> 9 bytes of data
T_200 timer already going (2)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 4096/0x1000) (Terminator)
> Message type: ALERTING (1)
> [1e 02 81 88]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ]
-- Executing Set("Zap/1-1", "DID=0801") in new stack
-- Executing NoOp("Zap/1-1", "DID is now 0801") in new stack
-- Executing GotoIf("Zap/1-1", "1?zapok:notzap") in new stack
-- Goto (from-zaptel,s,8)
-- Executing NoOp("Zap/1-1", "Is a Zaptel Channel") in new stack
-- Executing Set("Zap/1-1", "CHAN=1-1") in new stack
-- Executing Set("Zap/1-1", "CHAN=1") in new stack
-- Executing Macro("Zap/1-1", "from-zaptel-1|0801|1") in new stack
-- Executing NoOp("Zap/1-1", "Returned from Macro from-zaptel-1") in new stack
-- Executing Goto("Zap/1-1", "from-pstn|0801|1") in new stack
-- Goto (from-pstn,0801,1)
> [ 00 01 34 fe 08 02 90 00 45 08 02 81 90 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 026 0: 0
> N(R): 127 P: 0
> 9 bytes of data
T_200 timer already going (2)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 4096/0x1000) (Terminator)
> Message type: DISCONNECT (69)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]
-- Hungup 'Zap/1-1'
asterisk1*CLI>
< [ 00 01 01 32 ]
asterisk1*CLI>
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 025 P/F: 0
< 0 bytes of data
-- ACKing all packets from 23 to (but not including) 25
-- ACKing packet 24, new txqueue is 25 (-1 means empty)
-- Something left to transmit (25), restarting T200 counter
asterisk1*CLI>
< [ 00 01 01 34 ]
asterisk1*CLI>
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 026 P/F: 0
< 0 bytes of data
-- ACKing all packets from 24 to (but not including) 26
-- ACKing packet 25, new txqueue is 26 (-1 means empty)
-- Something left to transmit (26), restarting T200 counter
asterisk1*CLI>
< [ 00 01 01 36 ]
asterisk1*CLI>
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 027 P/F: 0
< 0 bytes of data
-- ACKing all packets from 25 to (but not including) 27
-- ACKing packet 26, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
asterisk1*CLI>
< [ 02 01 fe 36 08 02 10 00 4d ]
asterisk1*CLI>
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 127 0: 0
< N(R): 027 P: 0
< 5 bytes of data
-- ACKing all packets from 26 to (but not including) 27
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 4096/0x1000) (Originator)
< Message type: RELEASE (77)
Sending Receiver Ready (0)
asterisk1*CLI>
> [ 02 01 01 00 ]
asterisk1*CLI>
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 000 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
> [ 00 01 36 00 08 02 90 00 5a 08 02 81 90 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 027 0: 0
> N(R): 000 P: 0
> 9 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 4096/0x1000) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]
asterisk1*CLI>
< [ 00 01 01 38 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 028 P/F: 0
< 0 bytes of data
-- ACKing all packets from 26 to (but not including) 28
-- ACKing packet 27, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (0)
> [ 00 01 01 01 ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 000 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
asterisk1*CLI>
< [ 00 01 01 39 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 028 P/F: 1
< 0 bytes of data
-- ACKing all packets from 27 to (but not including) 28
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter