rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] Command line: root=UUID=ebab11d6-e2e9-4e6e-97c1-65988ca7b5e4 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F6D00 checksum 0
[ 0.000000] ACPI: RSDP 000F6D00, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 3FFF30C0, 48AA (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF7980, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fff0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 262128
[ 0.000000] On node 0 totalpages: 262031
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1124 pages reserved
[ 0.000000] DMA zone: 2819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3527 pages used for memmap
[ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 257324
[ 0.000000] Kernel command line: root=UUID=ebab11d6-e2e9-4e6e-97c1-65988ca7b5e4 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 22.790517] time.c: Detected 2080.210 MHz processor.
[ 22.791923] Console: colour VGA+ 80x25
[ 22.791937] Checking aperture...
[ 22.791940] CPU 0: aperture @ e0000000 size 128 MB
[ 22.800652] Memory: 1021196k/1048512k available (2274k kernel code, 26928k reserved, 1181k data, 296k init)
[ 22.800697] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 22.880473] Calibrating delay using timer specific routine.. 4162.84 BogoMIPS (lpj=8325685)
[ 22.880502] Security Framework v1.0.0 initialized
[ 22.880509] SELinux: Disabled at boot.
[ 22.880593] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 22.881181] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 22.881458] Mount-cache hash table entries: 256
[ 22.881579] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 22.881582] CPU: L2 Cache: 512K (64 bytes/line)
[ 22.881584] CPU 0/0 -> Node 0
[ 22.881599] SMP alternatives: switching to UP code
[ 22.881727] Freeing SMP alternatives: 24k freed
[ 22.881998] Early unpacking initramfs... done
[ 23.185585] ACPI: Core revision 20070126
[ 23.185633] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 23.228220] Using local APIC timer interrupts.
[ 23.276270] result 13001309
[ 23.276271] Detected 13.001 MHz APIC timer.
[ 23.276313] Brought up 1 CPUs
[ 23.276481] NET: Registered protocol family 16
[ 23.276551] ACPI: bus type pci registered
[ 23.276557] PCI: Using configuration type 1
[ 23.277418] ACPI: EC: Look up EC in DSDT
[ 23.282102] ACPI: Interpreter enabled
[ 23.282105] ACPI: (supports S0 S1 S4 S5)
[ 23.282118] ACPI: Using IOAPIC for interrupt routing
[ 23.290338] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.290343] PCI: Probing PCI hardware (bus 00)
[ 23.290817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.290951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 23.291208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 23.336027] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.336163] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.336304] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 23.336440] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 23.336574] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 23.336709] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 23.336844] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 23.336978] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 23.337112] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.337248] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 23.337382] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.337517] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 23.337655] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 23.337795] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.337929] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.338063] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.338202] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.338342] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 23.338457] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 23.338560] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 23.338662] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 23.338763] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 23.338865] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 23.339013] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 23.339160] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 23.339306] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 23.339452] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 23.339598] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 23.339745] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 23.339849] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 23.339995] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 23.340142] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 23.340291] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 23.340439] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 23.340590] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
[ 23.340742] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0
[ 23.340853] ACPI: Power Resource [ISAV] (on)
[ 23.340868] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.340877] pnp: PnP ACPI init
[ 23.340888] ACPI: bus type pnp registered
[ 23.344964] pnp: PnP ACPI: found 15 devices
[ 23.344967] ACPI: ACPI bus type pnp unregistered
[ 23.345018] PCI: Using ACPI for IRQ routing
[ 23.345022] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.345031] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 23.345121] NET: Registered protocol family 8
[ 23.345123] NET: Registered protocol family 20
[ 23.345172] agpgart: Detected AGP bridge 0
[ 23.345176] agpgart: Setting up Nforce3 AGP.
[ 23.348606] agpgart: AGP aperture is 128M @ 0xe0000000
[ 23.348671] pnp: 00:00: ioport range 0x1000-0x107f has been reserved
[ 23.348674] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
[ 23.348676] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
[ 23.348679] pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
[ 23.348682] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
[ 23.348684] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
[ 23.348690] pnp: 00:01: iomem range 0xf0000-0xf3fff could not be reserved
[ 23.348693] pnp: 00:01: iomem range 0xf4000-0xf7fff could not be reserved
[ 23.348696] pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved
[ 23.348698] pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
[ 23.348930] PCI: Bridge: 0000:00:0b.0
[ 23.348932] IO window: disabled.
[ 23.348936] MEM window: f6000000-f7ffffff
[ 23.348939] PREFETCH window: e8000000-efffffff
[ 23.348944] PCI: Bridge: 0000:00:0e.0
[ 23.348946] IO window: a000-afff
[ 23.348948] MEM window: f4000000-f5ffffff
[ 23.348951] PREFETCH window: f0000000-f3ffffff
[ 23.348959] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 23.348994] NET: Registered protocol family 2
[ 23.352246] Time: tsc clocksource has been installed.
[ 23.388268] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 23.388553] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[ 23.390205] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 23.390740] TCP: Hash tables configured (established 131072 bind 65536)
[ 23.390743] TCP reno registered
[ 23.400329] checking if image is initramfs... it is
[ 23.994386] Freeing initrd memory: 7961k freed
[ 23.998839] audit: initializing netlink socket (disabled)
[ 23.998850] audit(1197986369.168:1): initialized
[ 24.000457] VFS: Disk quotas dquot_6.5.1
[ 24.000500] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 24.000582] io scheduler noop registered
[ 24.000584] io scheduler anticipatory registered
[ 24.000586] io scheduler deadline registered
[ 24.000663] io scheduler cfq registered (default)
[ 24.064042] Boot video device is 0000:01:00.0
[ 24.083666] Real Time Clock Driver v1.12ac
[ 24.083748] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.083751] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 24.083829] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.084009] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 24.084400] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.084586] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 24.085134] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 24.085298] input: Macintosh mouse button emulation as /class/input/input0
[ 24.085361] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 24.088347] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 24.088351] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 24.088490] mice: PS/2 mouse device common for all mice
[ 24.088593] TCP cubic registered
[ 24.088645] NET: Registered protocol family 1
[ 24.088816] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 24.088822] Freeing unused kernel memory: 296k freed
[ 24.140207] input: AT Translated Set 2 keyboard as /class/input/input1
[ 25.236515] AppArmor: AppArmor initialized<5>audit(1197986370.408:2): type=1505 info="AppArmor initialized" pid=1182
[ 25.241137] fuse init (API version 7.8)
[ 25.244748] Failure registering capabilities with primary security module.
[ 25.719185] usbcore: registered new interface driver usbfs
[ 25.719206] usbcore: registered new interface driver hub
[ 25.719226] usbcore: registered new device driver usb
[ 25.719845] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 25.720129] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 25.720135] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 22
[ 25.720206] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 25.720212] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 25.720323] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 25.720339] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf8002000
[ 25.749407] SCSI subsystem initialized
[ 25.753911] libata version 2.21 loaded.
[ 25.764853] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 25.769445] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 25.769450] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 25.782190] usb usb1: configuration #1 chosen from 1 choice
[ 25.782219] hub 1-0:1.0: USB hub found
[ 25.782227] hub 1-0:1.0: 4 ports detected
[ 25.887304] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 25.887312] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 21
[ 25.887385] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 25.887391] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 25.887435] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 25.887452] ohci_hcd 0000:00:02.1: irq 21, io mem 0xf8003000
[ 25.923287] Floppy drive(s): fd0 is 1.44M
[ 25.948994] usb usb2: configuration #1 chosen from 1 choice
[ 25.949021] hub 2-0:1.0: USB hub found
[ 25.949029] hub 2-0:1.0: 4 ports detected
[ 25.964737] FDC 0 is a post-1991 82077
[ 26.055265] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 26.055272] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20
[ 26.055355] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 26.055361] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 26.055413] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 26.055437] ehci_hcd 0000:00:02.2: debug port 1
[ 26.055439] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 26.055450] ehci_hcd 0000:00:02.2: irq 20, io mem 0xf8004000
[ 26.055455] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.055533] usb usb3: configuration #1 chosen from 1 choice
[ 26.055557] hub 3-0:1.0: USB hub found
[ 26.055563] hub 3-0:1.0: 8 ports detected
[ 26.165360] sata_nv 0000:00:0a.0: version 3.4
[ 26.165676] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 26.165679] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 22
[ 26.165709] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 26.165789] scsi0 : sata_nv
[ 26.177929] scsi1 : sata_nv
[ 26.178019] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001dc00 irq 22
[ 26.178023] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001dc08 irq 22
[ 26.490590] ata1: SATA link down (SStatus 0 SControl 300)
[ 26.770444] usb 3-8: new high speed USB device using ehci_hcd and address 3
[ 26.802423] ata2: SATA link down (SStatus 0 SControl 300)
[ 26.802792] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 26.802795] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 21
[ 26.802800] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 26.913071] usb 3-8: configuration #1 chosen from 1 choice
[ 27.218204] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 27.326534] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:05.0
[ 27.326641] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[ 27.326716] NFORCE3-250: chipset revision 162
[ 27.326718] NFORCE3-250: not 100% native mode: will probe irqs later
[ 27.326721] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
[ 27.326723] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
[ 27.326727] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[ 27.326735] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 27.326742] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 27.326749] Probing IDE interface ide0...
[ 27.440163] usb 2-3: configuration #1 chosen from 1 choice
[ 27.443857] usbcore: registered new interface driver libusual
[ 27.447751] Initializing USB Mass Storage driver...
[ 27.447809] scsi2 : SCSI emulation for USB Mass Storage devices
[ 27.447850] usb-storage: device found at 3
[ 27.447852] usb-storage: waiting for device to settle before scanning
[ 27.447865] usbcore: registered new interface driver usb-storage
[ 27.447867] USB Mass Storage support registered.
[ 27.618062] hda: WDC WD400EB-00CPF0, ATA DISK drive
[ 27.897913] hdb: Maxtor 6E040L0, ATA DISK drive
[ 27.955740] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 27.973187] Probing IDE interface ide1...
[ 28.713493] hdc: LITE-ON DVDRW LH-20A1H, ATAPI CD/DVD-ROM drive
[ 29.385711] ide1 at 0x170-0x177,0x376 on irq 15
[ 29.399413] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 29.399420] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 29.399514] skge 1.11 addr 0xf5000000 irq 19 chip Yukon-Lite rev 7
[ 29.399825] skge eth1: addr 00:0f:ea:5c:66:89
[ 29.400083] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 29.400088] ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 29.451691] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f5008000-f50087ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 29.455877] hda: max request size: 128KiB
[ 29.465967] hda: Host Protected Area detected.
[ 29.465970] current capacity is 78159151 sectors (40017 MB)
[ 29.465971] native capacity is 78165360 sectors (40020 MB)
[ 29.468022] hda: Host Protected Area disabled.
[ 29.468027] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[ 29.468032] hda: cache flushes not supported
[ 29.468072] hda: hda1 hda2 hda3
[ 29.535810] hdb: max request size: 128KiB
[ 29.535907] hdb: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 29.536001] hdb: cache flushes supported
[ 29.536014] hdb: hdb1
[ 29.565901] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 29.565909] Uniform CD-ROM driver Revision: 3.20
[ 30.027699] Attempting manual resume
[ 30.027702] swsusp: Resume From Partition 3:3
[ 30.027704] PM: Checking swsusp image.
[ 30.027833] PM: Resume from disk failed.
[ 30.069190] kjournald starting. Commit interval 5 seconds
[ 30.069199] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.724422] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea56005ef6d3]
[ 32.447537] usb-storage: device scan complete
[ 32.448530] scsi 2:0:0:0: Direct-Access LEXAR JD FIREFLY 1100 PQ: 0 ANSI: 0 CCS
[ 37.193106] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 37.193134] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 37.852512] input: X10 Wireless Technology Inc USB Receiver as /class/input/input2
[ 37.852584] usbcore: registered new interface driver ati_remote
[ 37.852587] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/misc/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
[ 37.860417] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/misc/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[ 37.910128] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 37.913613] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 37.925499] input: PC Speaker as /class/input/input3
[ 38.163782] sd 2:0:0:0: [sda] 1981440 512-byte hardware sectors (1014 MB)
[ 38.164848] sd 2:0:0:0: [sda] Write Protect is off
[ 38.164852] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 38.164855] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 38.167502] sd 2:0:0:0: [sda] 1981440 512-byte hardware sectors (1014 MB)
[ 38.168248] sd 2:0:0:0: [sda] Write Protect is off
[ 38.168250] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 38.168253] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 38.168259] sda: sda1
[ 38.169214] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 38.253113] lirc_dev: IR Remote Control driver registered, at major 61
[ 38.344096] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 38.397487] Linux video capture interface: v2.00
[ 38.426928] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 38.429468] parport_pc 00:0b: reported by Plug and Play ACPI
[ 38.429508] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 38.443202]
[ 38.443203] lirc_atiusb: USB remote driver for LIRC $Revision: 1.61 $
[ 38.443206] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
[ 38.451378] usbcore: registered new interface driver lirc_atiusb
[ 38.617122] nvidia: module license 'NVIDIA' taints kernel.
[ 38.898985] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 38.898993] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
[ 38.899123] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9639 Mon Apr 16 20:18:26 PDT 2007
[ 39.029856] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[ 39.029861] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 20
[ 39.029941] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 39.053577] ivtv: ==================== START INIT IVTV ====================
[ 39.053581] ivtv: version 1.0.0 (2.6.22-14-generic SMP mod_unload ) loading
[ 39.359678] intel8x0_measure_ac97_clock: measured 58723 usecs
[ 39.359682] intel8x0: clocking to 46979
[ 39.360359] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 39.360720] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 39.360730] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 40.067955] ivtv0: loaded v4l-cx2341x-enc.fw firmware (-139637030893296 bytes)
[ 40.283201] ivtv0: Encoder revision: 0x02050032
[ 40.283204] ivtv0: Recommended firmware version is 0x02060039.
[ 40.337802] tveeprom 2-0050: Hauppauge model 26152, rev E5B2, serial# 10364770
[ 40.337807] tveeprom 2-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
[ 40.337811] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
[ 40.337813] tveeprom 2-0050: audio processor is CX25843 (idx 37)
[ 40.337815] tveeprom 2-0050: decoder processor is CX25843 (idx 30)
[ 40.337818] tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
[ 40.337820] ivtv0: Autodetected Hauppauge WinTV PVR-150
[ 40.337822] ivtv0: reopen i2c bus for IR-blaster support
[ 40.408044] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 40.550446] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
[ 43.289350] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 43.371490] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 43.408200] tuner 2-0061: type set to 50 (TCL 2002N)
[ 43.706992] ivtv0: Registered device video0 for encoder MPEG (4 MB)
[ 43.707245] ivtv0: Registered device video32 for encoder YUV (2 MB)
[ 43.707510] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
[ 43.707692] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
[ 43.725405] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[ 43.725420] ivtv: ==================== END INIT IVTV ====================
[ 44.461575] lp0: using parport0 (interrupt-driven).
[ 44.736742] Adding 1502068k swap on /dev/hda3. Priority:-1 extents:1 across:1502068k
[ 45.431611] EXT3 FS on hda2, internal journal
[ 127.693986] kjournald starting. Commit interval 5 seconds
[ 127.704464] EXT3 FS on hdb1, internal journal
[ 127.704468] EXT3-fs: mounted filesystem with ordered data mode.