Part of Slepp's Projects — Pastebin — TURL — Imagebin — Filebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate

Paste Actions

Download Raw
Embed
Post to Twitter
Remove Paste

Paste Details

Raw format, 10 years 2 weeks old.

Advertising

Mine
Tuesday, December 18th, 2007 at 7:04:33am UTC 

  1. [    0.000000] Linux version 2.6.22-14-generic ([email protected]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
  2. [    0.000000] BIOS-provided physical RAM map:
  3. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  4. [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  5. [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
  6. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007f670000 (usable)
  7. [    0.000000]  BIOS-e820: 000000007f670000 - 000000007f700000 (ACPI NVS)
  8. [    0.000000]  BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
  9. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  10. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  11. [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
  12. [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
  13. [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
  14. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  15. [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  16. [    0.000000] 1142MB HIGHMEM available.
  17. [    0.000000] 896MB LOWMEM available.
  18. [    0.000000] found SMP MP-table at 000f65c0
  19. [    0.000000] Entering add_active_range(0, 0, 521840) 0 entries of 256 used
  20. [    0.000000] Zone PFN ranges:
  21. [    0.000000]   DMA             0 ->     4096
  22. [    0.000000]   Normal       4096 ->   229376
  23. [    0.000000]   HighMem    229376 ->   521840
  24. [    0.000000] early_node_map[1] active PFN ranges
  25. [    0.000000]     0:        0 ->   521840
  26. [    0.000000] On node 0 totalpages: 521840
  27. [    0.000000]   DMA zone: 32 pages used for memmap
  28. [    0.000000]   DMA zone: 0 pages reserved
  29. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  30. [    0.000000]   Normal zone: 1760 pages used for memmap
  31. [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  32. [    0.000000]   HighMem zone: 2284 pages used for memmap
  33. [    0.000000]   HighMem zone: 290180 pages, LIFO batch:31
  34. [    0.000000] DMI present.
  35. [    0.000000] ACPI: RSDP signature @ 0xC00F6510 checksum 0
  36. [    0.000000] ACPI: RSDP 000F6510, 0014 (r0 TOSINV)
  37. [    0.000000] ACPI: RSDT 7F67E201, 0048 (r1 TOSINV Capell00  6040000  LTP        0)
  38. [    0.000000] ACPI: FACP 7F685DEE, 0074 (r1 TOSINV CALISTGA  6040000 LOHR       5A)
  39. [    0.000000] ACPI: DSDT 7F67F8B6, 6538 (r1 TOSINV CALISTGA  6040000 INTL 20050624)
  40. [    0.000000] ACPI: FACS 7F686FC0, 0040
  41. [    0.000000] ACPI: APIC 7F685E62, 0068 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
  42. [    0.000000] ACPI: HPET 7F685ECA, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
  43. [    0.000000] ACPI: MCFG 7F685F02, 003C (r1 INTEL  CALISTGA  6040000 LOHR       5A)
  44. [    0.000000] ACPI: BOOT 7F685FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
  45. [    0.000000] ACPI: APIC 7F685F70, 0068 (r1 TOSINV   APIC    6040000  LTP        0)
  46. [    0.000000] ACPI: SSDT 7F67F263, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
  47. [    0.000000] ACPI: SSDT 7F67EBD1, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
  48. [    0.000000] ACPI: SSDT 7F67E249, 04F6 (r1  PmRef    CpuPm     3000 INTL 20050624)
  49. [    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
  50. [    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
  51. [    0.000000] ACPI: PM-Timer IO Port: 0x1008
  52. [    0.000000] ACPI: Local APIC address 0xfee00000
  53. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  54. [    0.000000] Processor #0 6:15 APIC version 20
  55. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  56. [    0.000000] Processor #1 6:15 APIC version 20
  57. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  58. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  59. [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  60. [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
  61. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  62. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  63. [    0.000000] ACPI: IRQ0 used by override.
  64. [    0.000000] ACPI: IRQ2 used by override.
  65. [    0.000000] ACPI: IRQ9 used by override.
  66. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  67. [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  68. [    0.000000] Using ACPI (MADT) for SMP configuration information
  69. [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
  70. [    0.000000] Built 1 zonelists.  Total pages: 517764
  71. [    0.000000] Kernel command line: root=UUID=4d0d26f5-d93f-47f6-b1c6-2d79d9836bb8 ro quiet splash
  72. [    0.000000] mapped APIC to ffffd000 (fee00000)
  73. [    0.000000] mapped IOAPIC to ffffc000 (fec00000)
  74. [    0.000000] Enabling fast FPU save and restore... done.
  75. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  76. [    0.000000] Initializing CPU#0
  77. [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  78. [    0.000000] Detected 1662.618 MHz processor.
  79. [   26.418311] Console: colour VGA+ 80x25
  80. [   26.418584] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  81. [   26.418886] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  82. [   26.512206] Memory: 2057784k/2087360k available (2015k kernel code, 28388k reserved, 916k data, 364k init, 1169856k highmem)
  83. [   26.512214] virtual kernel memory layout:
  84. [   26.512216]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
  85. [   26.512217]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  86. [   26.512218]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  87. [   26.512219]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  88. [   26.512220]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
  89. [   26.512222]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
  90. [   26.512223]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
  91. [   26.512226] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  92. [   26.512266] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
  93. [   26.512419] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  94. [   26.512424] hpet0: 3 64-bit timers, 14318180 Hz
  95. [   26.593323] Calibrating delay using timer specific routine.. 3328.85 BogoMIPS (lpj=6657706)
  96. [   26.593349] Security Framework v1.0.0 initialized
  97. [   26.593355] SELinux:  Disabled at boot.
  98. [   26.593368] Mount-cache hash table entries: 512
  99. [   26.593501] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
  100. [   26.593508] monitor/mwait feature present.
  101. [   26.593510] using mwait in idle threads.
  102. [   26.593515] CPU: L1 I cache: 32K, L1 D cache: 32K
  103. [   26.593517] CPU: L2 cache: 2048K
  104. [   26.593520] CPU: Physical Processor ID: 0
  105. [   26.593522] CPU: Processor Core ID: 0
  106. [   26.593524] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
  107. [   26.593533] Compat vDSO mapped to ffffe000.
  108. [   26.593548] Checking 'hlt' instruction... OK.
  109. [   26.609411] SMP alternatives: switching to UP code
  110. [   26.609859] Early unpacking initramfs... done
  111. [   26.952453] ACPI: Core revision 20070126
  112. [   26.952503] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  113. [   27.013817] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
  114. [   27.013834] SMP alternatives: switching to SMP code
  115. [   27.013917] Booting processor 1/1 eip 3000
  116. [   27.024118] Initializing CPU#1
  117. [   27.108526] Calibrating delay using timer specific routine.. 3250.30 BogoMIPS (lpj=6500612)
  118. [   27.108533] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
  119. [   27.108538] monitor/mwait feature present.
  120. [   27.108541] CPU: L1 I cache: 32K, L1 D cache: 32K
  121. [   27.108543] CPU: L2 cache: 2048K
  122. [   27.108545] CPU: Physical Processor ID: 0
  123. [   27.108546] CPU: Processor Core ID: 1
  124. [   27.108548] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
  125. [   27.109084] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
  126. [   27.109108] Total of 2 processors activated (6579.15 BogoMIPS).
  127. [   27.109311] ENABLING IO-APIC IRQs
  128. [   27.109517] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  129. [   27.256392] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  130. [   27.276378] Brought up 2 CPUs
  131. [   27.341179] migration_cost=27
  132. [   27.341312] Booting paravirtualized kernel on bare hardware
  133. [   27.341404] Time: 19:34:08  Date: 11/17/107
  134. [   27.341424] NET: Registered protocol family 16
  135. [   27.341508] EISA bus registered
  136. [   27.341513] ACPI: bus type pci registered
  137. [   27.341629] PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7
  138. [   27.341631] PCI: Using configuration type 1
  139. [   27.341633] Setting up standard PCI resources
  140. [   27.345965] ACPI: EC: Look up EC in DSDT
  141. [   27.368786] ACPI: EC: GPE=0x16, ports=0x66, 0x62
  142. [   27.371854] ACPI: System BIOS is requesting _OSI(Linux)
  143. [   27.371857] ACPI: Please test with "acpi_osi=!Linux"
  144. [   27.371858] Please send dmidecode to [email protected]
  145. [   27.372474] ACPI: Interpreter enabled
  146. [   27.372477] ACPI: (supports S0 S3 S4 S5)
  147. [   27.372493] ACPI: Using IOAPIC for interrupt routing
  148. [   27.444505] ACPI: EC: GPE=0x16, ports=0x66, 0x62
  149. [   27.444562] ACPI: PCI Root Bridge [PCI0] (0000:00)
  150. [   27.444571] PCI: Probing PCI hardware (bus 00)
  151. [   27.445366] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
  152. [   27.445371] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
  153. [   27.446440] PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling
  154. [   27.446534] PCI: Transparent bridge - 0000:00:1e.0
  155. [   27.446678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  156. [   27.446990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  157. [   27.447122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  158. [   27.447252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  159. [   27.447393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  160. [   27.568159] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  161. [   27.568265] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  162. [   27.568367] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  163. [   27.568468] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  164. [   27.568569] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  165. [   27.568671] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  166. [   27.568775] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  167. [   27.568877] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  168. [   27.569056] ACPI: Power Resource [FN00] (on)
  169. [   27.569065] Linux Plug and Play Support v0.97 (c) Adam Belay
  170. [   27.569076] pnp: PnP ACPI init
  171. [   27.569083] ACPI: bus type pnp registered
  172. [   27.639909] pnp: PnP ACPI: found 10 devices
  173. [   27.639912] ACPI: ACPI bus type pnp unregistered
  174. [   27.639916] PnPBIOS: Disabled by ACPI PNP
  175. [   27.639959] PCI: Using ACPI for IRQ routing
  176. [   27.639961] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  177. [   27.671775] NET: Registered protocol family 8
  178. [   27.671778] NET: Registered protocol family 20
  179. [   27.671827] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
  180. [   27.671830] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
  181. [   27.671834] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
  182. [   27.671837] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
  183. [   27.671844] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
  184. [   27.675663] Time: tsc clocksource has been installed.
  185. [   27.675672] Switched to high resolution mode on CPU 0
  186. [   27.675760] Switched to high resolution mode on CPU 1
  187. [   27.702115] PCI: Bridge: 0000:00:1c.0
  188. [   27.702117]   IO window: disabled.
  189. [   27.702123]   MEM window: disabled.
  190. [   27.702127]   PREFETCH window: disabled.
  191. [   27.702133] PCI: Bridge: 0000:00:1c.1
  192. [   27.702137]   IO window: 2000-2fff
  193. [   27.702143]   MEM window: d8000000-d9ffffff
  194. [   27.702148]   PREFETCH window: d2000000-d3ffffff
  195. [   27.702155] PCI: Bridge: 0000:00:1c.2
  196. [   27.702158]   IO window: 3000-3fff
  197. [   27.702165]   MEM window: da000000-dbffffff
  198. [   27.702170]   PREFETCH window: d4000000-d5ffffff
  199. [   27.702182] PCI: Bus 8, cardbus bridge: 0000:07:06.0
  200. [   27.702185]   IO window: 00004400-000044ff
  201. [   27.702190]   IO window: 00004800-000048ff
  202. [   27.702195]   PREFETCH window: 88000000-8bffffff
  203. [   27.702201]   MEM window: 8c000000-8fffffff
  204. [   27.702206] PCI: Bridge: 0000:00:1e.0
  205. [   27.702209]   IO window: 4000-4fff
  206. [   27.702215]   MEM window: dc000000-dc0fffff
  207. [   27.702221]   PREFETCH window: 88000000-8bffffff
  208. [   27.702251] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
  209. [   27.702259] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  210. [   27.702284] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
  211. [   27.702290] PCI: Setting latency timer of device 0000:00:1c.1 to 64
  212. [   27.702315] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
  213. [   27.702321] PCI: Setting latency timer of device 0000:00:1c.2 to 64
  214. [   27.702336] PCI: Setting latency timer of device 0000:00:1e.0 to 64
  215. [   27.702354] PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
  216. [   27.702359] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18
  217. [   27.702374] NET: Registered protocol family 2
  218. [   27.751519] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  219. [   27.751575] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
  220. [   27.752298] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  221. [   27.752563] TCP: Hash tables configured (established 131072 bind 65536)
  222. [   27.752567] TCP reno registered
  223. [   27.767640] checking if image is initramfs... it is
  224. [   28.442326] Freeing initrd memory: 7328k freed
  225. [   28.442450] Simple Boot Flag at 0x36 set to 0x1
  226. [   28.442995] audit: initializing netlink socket (disabled)
  227. [   28.443013] audit(1197920048.480:1): initialized
  228. [   28.443116] highmem bounce pool size: 64 pages
  229. [   28.445114] VFS: Disk quotas dquot_6.5.1
  230. [   28.445163] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  231. [   28.445262] io scheduler noop registered
  232. [   28.445264] io scheduler anticipatory registered
  233. [   28.445266] io scheduler deadline registered
  234. [   28.445279] io scheduler cfq registered (default)
  235. [   28.445295] Boot video device is 0000:00:02.0
  236. [   28.445470] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  237. [   28.445532] assign_interrupt_mode Found MSI capability
  238. [   28.445535] Allocate Port Service[0000:00:1c.0:pcie00]
  239. [   28.445573] Allocate Port Service[0000:00:1c.0:pcie02]
  240. [   28.445678] PCI: Setting latency timer of device 0000:00:1c.1 to 64
  241. [   28.445739] assign_interrupt_mode Found MSI capability
  242. [   28.445742] Allocate Port Service[0000:00:1c.1:pcie00]
  243. [   28.445774] Allocate Port Service[0000:00:1c.1:pcie02]
  244. [   28.445884] PCI: Setting latency timer of device 0000:00:1c.2 to 64
  245. [   28.445945] assign_interrupt_mode Found MSI capability
  246. [   28.445947] Allocate Port Service[0000:00:1c.2:pcie00]
  247. [   28.445980] Allocate Port Service[0000:00:1c.2:pcie02]
  248. [   28.446155] isapnp: Scanning for PnP cards...
  249. [   28.791518] isapnp: No Plug & Play device found
  250. [   28.813668] Real Time Clock Driver v1.12ac
  251. [   28.813922] hpet_resources: 0xfed00000 is busy
  252. [   28.813957] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  253. [   28.815083] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  254. [   28.815218] input: Macintosh mouse button emulation as /class/input/input0
  255. [   28.815301] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  256. [   28.817701] i8042.c: Detected active multiplexing controller, rev 1.1.
  257. [   28.819168] serio: i8042 KBD port at 0x60,0x64 irq 1
  258. [   28.819173] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  259. [   28.819176] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  260. [   28.819179] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  261. [   28.819181] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  262. [   28.819324] mice: PS/2 mouse device common for all mice
  263. [   28.819458] EISA: Probing bus 0 at eisa.0
  264. [   28.819466] Cannot allocate resource for EISA slot 1
  265. [   28.819469] Cannot allocate resource for EISA slot 2
  266. [   28.819471] Cannot allocate resource for EISA slot 3
  267. [   28.819474] Cannot allocate resource for EISA slot 4
  268. [   28.819491] EISA: Detected 0 cards.
  269. [   28.819667] TCP cubic registered
  270. [   28.819681] NET: Registered protocol family 1
  271. [   28.819703] Using IPI No-Shortcut mode
  272. [   28.819857]   Magic number: 3:360:597
  273. [   28.819903]   hash matches device ptyd1
  274. [   28.820159] Freeing unused kernel memory: 364k freed
  275. [   28.857097] input: AT Translated Set 2 keyboard as /class/input/input1
  276. [   30.022639] AppArmor: AppArmor initialized<5>audit(1197920049.980:2):  type=1505 info="AppArmor initialized" pid=1257
  277. [   30.028506] fuse init (API version 7.8)
  278. [   30.032907] Failure registering capabilities with primary security module.
  279. [   30.068317] ACPI: Fan [FAN0] (on)
  280. [   30.073396] ACPI: SSDT 7F67E9A0, 01A8 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
  281. [   30.073612] ACPI: SSDT 7F67E73F, 01DC (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
  282. [   30.073927] ACPI: CPU0 (power states: C1[C1] C2[C2])
  283. [   30.073932] ACPI: Processor [CPU0] (supports 8 throttling states)
  284. [   30.074162] ACPI: SSDT 7F67EB48, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
  285. [   30.074364] ACPI: SSDT 7F67E91B, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
  286. [   30.074708] ACPI: CPU1 (power states: C1[C1] C2[C2])
  287. [   30.074712] ACPI: Processor [CPU1] (supports 8 throttling states)
  288. [   30.075546] ACPI: Thermal Zone [TZ00] (50 C)
  289. [   30.078797] ACPI: Invalid passive threshold
  290. [   30.083608] ACPI: Thermal Zone [TZ01] (51 C)
  291. [    3.392000] Marking TSC unstable due to: possible TSC halt in C2.
  292. [    3.396000] Time: hpet clocksource has been installed.
  293. [    3.836000] usbcore: registered new interface driver usbfs
  294. [    3.836000] usbcore: registered new interface driver hub
  295. [    3.836000] usbcore: registered new device driver usb
  296. [    3.836000] USB Universal Host Controller Interface driver v3.0
  297. [    3.836000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
  298. [    3.836000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
  299. [    3.836000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  300. [    3.836000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
  301. [    3.836000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
  302. [    3.836000] usb usb1: configuration #1 chosen from 1 choice
  303. [    3.836000] hub 1-0:1.0: USB hub found
  304. [    3.836000] hub 1-0:1.0: 2 ports detected
  305. [    3.900000] SCSI subsystem initialized
  306. [    3.904000] libata version 2.21 loaded.
  307. [    3.940000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
  308. [    3.940000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
  309. [    3.940000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  310. [    3.940000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
  311. [    3.940000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
  312. [    3.940000] usb usb2: configuration #1 chosen from 1 choice
  313. [    3.940000] hub 2-0:1.0: USB hub found
  314. [    3.940000] hub 2-0:1.0: 2 ports detected
  315. [    3.980000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
  316. [    3.980000] e100: Copyright(c) 1999-2006 Intel Corporation
  317. [    4.044000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
  318. [    4.044000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
  319. [    4.044000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  320. [    4.044000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
  321. [    4.044000] ehci_hcd 0000:00:1d.7: debug port 1
  322. [    4.044000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  323. [    4.044000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000
  324. [    4.048000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  325. [    4.048000] usb usb3: configuration #1 chosen from 1 choice
  326. [    4.048000] hub 3-0:1.0: USB hub found
  327. [    4.048000] hub 3-0:1.0: 8 ports detected
  328. [    4.168000] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 21
  329. [    4.168000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
  330. [    4.168000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
  331. [    4.168000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  332. [    4.168000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  333. [    4.168000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
  334. [    4.168000] usb usb4: configuration #1 chosen from 1 choice
  335. [    4.168000] hub 4-0:1.0: USB hub found
  336. [    4.168000] hub 4-0:1.0: 2 ports detected
  337. [    4.196000] e100: eth0: e100_probe: addr 0xdc005000, irq 21, MAC addr 00:A0:D1:50:57:83
  338. [    4.272000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
  339. [    4.272000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
  340. [    4.272000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  341. [    4.272000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  342. [    4.272000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
  343. [    4.272000] usb usb5: configuration #1 chosen from 1 choice
  344. [    4.272000] hub 5-0:1.0: USB hub found
  345. [    4.272000] hub 5-0:1.0: 2 ports detected
  346. [    4.376000] ata_piix 0000:00:1f.2: version 2.11
  347. [    4.376000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
  348. [    4.532000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
  349. [    4.532000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
  350. [    4.532000] scsi0 : ata_piix
  351. [    4.532000] scsi1 : ata_piix
  352. [    4.532000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
  353. [    4.532000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
  354. [    4.696000] ata1.00: ATA-7: TOSHIBA MK1637GSX, DL020M, max UDMA/100
  355. [    4.696000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  356. [    4.704000] ata1.00: configured for UDMA/100
  357. [    4.792000] usb 2-1: new low speed USB device using uhci_hcd and address 2
  358. [    4.944000] usb 2-1: configuration #1 chosen from 1 choice
  359. [    4.956000] usbcore: registered new interface driver hiddev
  360. [    4.968000] input: HID 062a:0000 as /class/input/input2
  361. [    4.968000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-1
  362. [    4.968000] usbcore: registered new interface driver usbhid
  363. [    4.968000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  364. [    5.028000] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.60, max UDMA/33
  365. [    5.200000] ata2.00: configured for UDMA/33
  366. [    5.200000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1637GS DL02 PQ: 0 ANSI: 5
  367. [    5.200000] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.60 PQ: 0 ANSI: 5
  368. [    5.200000] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 16
  369. [    5.248000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[dc006000-dc0067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  370. [    5.252000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
  371. [    5.252000] sd 0:0:0:0: [sda] Write Protect is off
  372. [    5.252000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  373. [    5.252000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  374. [    5.252000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
  375. [    5.252000] sd 0:0:0:0: [sda] Write Protect is off
  376. [    5.252000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  377. [    5.252000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  378. [    5.252000]  sda: sda1 sda3 < sda5 sda6 sda7 sda8 > sda4
  379. [    5.348000] sd 0:0:0:0: [sda] Attached SCSI disk
  380. [    5.352000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  381. [    5.352000] sr 1:0:0:0: Attached scsi generic sg1 type 5
  382. [    5.360000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  383. [    5.360000] Uniform CD-ROM driver Revision: 3.20
  384. [    5.360000] sr 1:0:0:0: Attached scsi CD-ROM sr0
  385. [    5.680000] Attempting manual resume
  386. [    5.680000] swsusp: Resume From Partition 8:8
  387. [    5.680000] PM: Checking swsusp image.
  388. [    5.692000] PM: Resume from disk failed.
  389. [    5.720000] kjournald starting.  Commit interval 5 seconds
  390. [    5.720000] EXT3-fs: mounted filesystem with ordered data mode.
  391. [    6.520000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d1505783]
  392. [   12.760000] Linux agpgart interface v0.102 (c) Dave Jones
  393. [   12.824000] agpgart: Detected an Intel 945GM Chipset.
  394. [   12.824000] agpgart: Detected 7932K stolen memory.
  395. [   12.840000] agpgart: AGP aperture is 256M @ 0xc0000000
  396. [   12.940000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  397. [   12.968000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  398. [   13.084000] intel_rng: FWH not detected
  399. [   13.188000] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
  400. [   13.188000] Yenta: Enabling burst memory read transactions
  401. [   13.188000] Yenta: Using CSCINT to route CSC interrupts to PCI
  402. [   13.188000] Yenta: Routing CardBus interrupts to PCI
  403. [   13.188000] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
  404. [   13.268000] sdhci: Secure Digital Host Controller Interface driver
  405. [   13.268000] sdhci: Copyright(c) Pierre Ossman
  406. [   13.348000] iTCO_vendor_support: vendor-support=0
  407. [   13.348000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
  408. [   13.384000] ieee80211_crypt: registered algorithm 'NULL'
  409. [   13.420000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
  410. [   13.420000] Socket status: 30000006
  411. [   13.420000] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
  412. [   13.420000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
  413. [   13.420000] cs: IO port probe 0x4000-0x4fff: clean.
  414. [   13.420000] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
  415. [   13.420000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
  416. [   13.420000] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
  417. [   13.420000] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18
  418. [   13.420000] mmc0: SDHCI at 0xdc006800 irq 18 DMA
  419. [   13.424000] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18
  420. [   13.432000] ieee80211: 802.11 data/management/control stack, git-1.1.13
  421. [   13.432000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
  422. [   13.496000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
  423. [   13.496000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
  424. [   13.496000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
  425. [   13.496000] PCI: Setting latency timer of device 0000:05:00.0 to 64
  426. [   13.500000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
  427. [   13.728000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
  428. [   13.728000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
  429. [   13.732000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
  430. [   13.732000] synaptics: Toshiba Satellite A105 detected, limiting rate to 40pps.
  431. [   13.764000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
  432. [   13.764000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
  433. [   13.764000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  434. [   13.868000] cs: IO port probe 0x100-0x3af: clean.
  435. [   13.872000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 0x4d0-0x4d7
  436. [   13.872000] cs: IO port probe 0x820-0x8ff: clean.
  437. [   13.872000] cs: IO port probe 0xc00-0xcf7: clean.
  438. [   13.872000] cs: IO port probe 0xa00-0xaff: clean.
  439. [   15.376000] hda_intel: azx_get_response timeout, switching to polling mode...
  440. [   15.384000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
  441. [   15.644000] lp: driver loaded but no devices found
  442. [   15.720000] Adding 1124508k swap on /dev/sda8.  Priority:-1 extents:1 across:1124508k
  443. [   16.072000] EXT3 FS on sda7, internal journal
  444. [   17.176000] kjournald starting.  Commit interval 5 seconds
  445. [   17.176000] EXT3 FS on sda5, internal journal
  446. [   17.176000] EXT3-fs: mounted filesystem with ordered data mode.
  447. [   17.200000] kjournald starting.  Commit interval 5 seconds
  448. [   17.200000] EXT3 FS on sda6, internal journal
  449. [   17.200000] EXT3-fs: mounted filesystem with ordered data mode.

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right
worth-right
worth-right
worth-right