rendered paste bodyFLASH:](Eraseregion [1] 8 sectors a 8kB)
[SYSTEM:] OHIO on 211MHz/125MHz
AVM_Ar7 >
AVM_Ar7 >go
AVM decompress Kernel:
............done
start kernel
[ohio_pre_init] System Clk = 62500000 Hz
LINUX started...
Linux version 2.6.13.1-ohio (1320) (gcc version 3.4.6) #1 Wed Dec 12 15:47:14 C7
memsize=32 MByte
flashsize=8 MByte
&_end=0x94239fe8 PFN_ALIGN(&_end)=0x9423a000 CPHYSADDR(PFN_ALIGN(&_end))=0x14230
CPU revision is: 00018448
[ohio_gpio_init]
Determined physical RAM map:
memory: 0023a000 @ 14000000 (reserved)
memory: 01dc6000 @ 1423a000 (usable)
On node 0 totalpages: 8192
[alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x9423d000-0x9427d0
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fbd000-0x9427d020
zone=0 zone_size[j]=0x90112
realsize=8192
DMA zone: 8192 pages, LIFO batch:3
zone=1 zone_size[j]=0x0
realsize=0
Normal zone: 0 pages, LIFO batch:1
zone=2 zone_size[j]=0x0
realsize=0
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: idle=4 console=ttyS0,38400n8r
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30)
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions). Base=0x942017cc
TLB synthesizer field overflow (simm)
Synthesized TLB load handler fastpath (34 instructions) Base=0x94204620.
TLB synthesizer field overflow (simm)
Synthesized TLB store handler fastpath (34 instructions) Base=0x94204820.
TLB synthesizer field overflow (simm)
Synthesized TLB modify handler fastpath (33 instructions) Base=0x94204a20.
PID hash table entries: 256 (order: 8, 4096 bytes)
CPU frequency 211.97 MHz
Using 105.984 MHz high precision timer.
[setup_irq]: irq 255 irqaction->handler 0x940428c0 (no_action+0x0/0x8 )
[register_console] enable commandline console 0
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30104k/30488k available (1562k kernel code, 320k reserved, 382k data, 1)
totalram_pages= 7542
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)
loops_per_jiffy=1056768
Mount-cache hash table entries: 512
Checking for 'wait' instruction... [speedup] idle_mode = 4
with idle values available.
NET: Registered protocol family 16
Can't analyze prologue code at 94184f54
Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher
avm_net_trace: Up and running.
[avm_power]Ohio250 detected -> overclocking possible
[avm] configured: watchdog eventled enable shift register enable direct gpio
gpio usage: reset=12 clock=13 store=10 data=9
AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Dec 12 2007 15:44)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[uart_add_one_port]
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART
[uart_add_one_port] dont register console port->type = 16
port->cons = 0x941c5f50 port->cons->flags = 0x7
[uart_add_one_port] success
io scheduler noop registered
[cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
physmap flash device: 400000 at 10000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
RedBoot partition parsing not available
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Ohio flash driver (size->0x400000 mem->0x10000000)
flash_size=0x800000
flash_mask=0xffffff
Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] 4 i 0 j 0
[genprobe_ident_chips] 5 i 0 j 1
Amd/Fujitsu Extended Query Table at 0x0040
Ohio flash memory: Swapping erase regions for broken CFI table.
number of CFI chips: 1
[mtd]: jffs2_size = 7 * 64KByte (0x70000 Bytes)
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x68e844/6875204
[init_ohio_flash] find hidden filesystem size=0x6cab00 offset=0xb5500
[mtd] configure jffs2 partition
[mtd] fs_size=0x740000 max=0x30000 is=0x70000 max jffs2_size value 3
[mtd] ERROR jffs2_size too big, reduce to max
[mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=00
Creating 7 MTD partitions on "Ohio flash memory":
0x000b5500-0x00780000 : "filesystem"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
mtd: partition "filesystem" doesn't start on an erase block boundary -- force ry
0x00010000-0x00780000 : "kernel"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00000000-0x00010000 : "bootloader"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00780000-0x007c0000 : "tffs (1)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x007c0000-0x00800000 : "tffs (2)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00750000-0x00780000 : "jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00010000-0x00750000 : "Kernel without jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
partition_info[0]: name=filesystem offset=b5500 size=6cab00
partition_info[0]: 0xb00b5500: 0x73717368 0x8b0
partition_info[1]: name=kernel offset=10000 size=770000
partition_info[1]: 0xb0010000: 0xfeed1281 0xa53e8
partition_info[2]: name=bootloader offset=0 size=10000
partition_info[2]: 0xb0000000: 0x40809000 0x40809800
partition_info[3]: name=tffs (1) offset=780000 size=40000
partition_info[3]: 0xb0780000: 0x40001 0xd7ffffff
partition_info[4]: name=tffs (2) offset=7c0000 size=40000
partition_info[4]: 0xb07c0000: 0x40001 0xd6ffffff
partition_info[5]: name=jffs2 offset=750000 size=30000
partition_info[5]: 0xb0750000: 0xffffffff 0xffffffff
partition_info[6]: name=Kernel without jffs2 offset=10000 size=740000
partition_info[6]: 0xb0010000: 0xfeed1281 0xa53e8
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
mcfw: IGMPv3 fast forwarding
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
[setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )
[setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x14 )
[ohio_late_init]
[avm_new] push_button_gpio=8 value=1 enabled
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
mount on mtd4 and mtd5 (double buffering)
Adam2 environment variables API installed.
[prepare_namespace] new mount root /dev/mtdblock1
use lzma compression
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 112k freed (7570 free)
[setup_irq]: irq 15 irqaction->handler 0x940d9b8c (serial8250_interrupt+0x0/0x1)
init started: BusyBox v1.8.2 (2007-12-09 19:36:38 CET)
rootdir=/
table='/etc/device.table'
AR7WDT: System Init UEberwachung 240 Sekunden
TFFS Name Table D
HWRevision 102.1.1.0
ProductID Fritz_Box_DECT_W900V
SerialNumber 0000000000000000
annex B
autoload yes
bootloaderVersion 1.153
bluetooth 00:04:0E:FF:FF:07
cpufrequency 211968000
firstfreeaddress 0x946AE570
firmware_version avm
firmware_info 29.04.48
flashsize 0x00800000
jffs2_size 7
kernel_args idle=4
maca 00:04:0E:DE:9F:46
macb 00:04:0E:DE:9F:47
macwlan 00:04:0E:DE:9F:48
macdsl 00:04:0E:DE:9F:49
memsize 0x02000000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
mtd0 0x90000000,0x90000000
mtd1 0x90010000,0x90780000
mtd2 0x90000000,0x90010000
mtd3 0x90780000,0x907C0000
mtd4 0x907C0000,0x90800000
mtd5 0x90780000,0x90780000
my_ipaddress 192.168.178.1
prompt AVM_Ar7
ptest
reserved 00:04:0E:FF:FF:00
req_fullrate_freq 125000000
sysfrequency 125000000
urlader-version 1153
usb_board_mac 00:04:0E:DE:9F:4A
usb_rndis_mac 00:04:0E:DE:9F:4B
usb_device_id 0x0000
usb_revision_id 0x0000
usb_device_name USB DSL Device
usb_manufacturer_name AVM
wlan_key 2881006638504243
wlan_cal 0013,03F8,0014,00F4,010A,0105,010A,0302,0353
mknod: /var/flash/ar7.cfg: File exists
Loading /var/flash/ds_mod...done.
Loading users, groups and passwords...done.
Loading hosts...done.
Loading config...[avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=93
done.
Loading modules...done.
cp /etc/default.049/fx_moh.default /var/fx_moh
Piglet: module license '
(C) Copyright 2005 by AVM
' taints kernel.
EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1
[avm_new]push_button_ctrl:'ATA-Schalter': enable=1 gpio=0 regaddr=be00002c butt2
[jffs2] xx=mtd6: 00030000 00010000 "jffs2"
[jffs2] i=mtd6:
[jffs2] jffs2_pat=6
[jffs2] i=00030000
[jffs2] jffs2_size=3
[jffs2] i=0001000[avm_new]push_button 'ATA-Schalter', released: GPIO=0 presses=8
0
[jffs2] i="jffs2"
[jffs2] load jffs2 module
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
[jffs2] mount jffs
jffs2: Too few erase blocks (3)
mount: mounting /dev/mtdblock6 on /data failed: Invalid argument
copying image...
done.
jffs2: Too few erase blocks (3)
mount: mounting /dev/mtdblock6 on /data failed: Invalid argument
TAM: create JFFS2 directory /data/tam
mkdir: cannot create directory '/data/tam': Read-only file system
TAM Defaults: User Directory /data/tam not found!
attempting to load DSL Firmware '/lib/modules/microvoip-dsl.bin'
**** ANNEX: 'B'
*************************************
setting DSL Firmware to Annex B
registered device TI Avalanche SAR
tiatm driver (patch_annex=0xc00e032c)
[tiatm] Set StrictPriority=0
DSP binary filesize = 303784 bytes
[tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019
[avm_power]Ohio250 detected -> overclocking possible
[avm_power]#### boostVoltage: DSP Core voltage set to 1,5 V ####
[setup_irq]: irq 23 irqaction->handler 0xc00c7208 (tn7atm_sar_irq+0x0/0x30 [tia)
[setup_irq]: irq 31 irqaction->handler 0xc00c7238 (tn7atm_dsl_irq+0x0/0x28 [tia)
[tiatm]: Powermanagment (States => 1,3,10) supported!
Texas Instruments ATM driver: version:[4.07.06.00]
[tiatm] AvmInterface length: 40
ubik2 driver (ubik2 - 0x10=0xc003b8f4)
atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc002abfc
atm_dsp_register_ubik2: dsp mem pointer 0xa1c0f218
ubik2_init_interface: DSP-Link Version v3 8480
checkempty: : No such file or directory
driver params overwritten io_addr=0x0 irq_num=0
[4294939439][isdn]svn:2146
gpio_ssi_init: done
[setup_irq]: irq 28 irqaction->handler 0xc00354a0 (soft_interrupt_handler+0x0/0)
[4294939444]CPU-Clk: 105 * 2 MHz
[4294939444]DSP-Fw: Version 3.183] EC=3 DTMF=3 Slots=10 BChan=8(Analog=4) DChan
[4294939497]BLK: DECT-Hardware detected!
[4294939497]BLK: DECT StartUp, mode = WAIT, firmware: 00.31.12
[4294939558]BLK: DECT StartUp, mode = MASTER INIT, firmware: 00.31.12
capicodec_init()
[capi_codec] support fax
[capi_codec] support Codecs
usbcore: registered new driver usbfs
usbcore: registered new driver hub
AHCI RevisionID = 0x02, RamSize = 16384, NumPorts= 1
[setup_irq]: irq 9 irqaction->handler 0xc00bd490 (ahci_irq+0x0/0x880 [usbahcico)
ahci : new USB bus registered, assigned bus number 1
AVM USB 1.1 Host started
kdsldmod: init start (Dec 13 2007 16:20:09) sizeof(struct sk_buff)=176
kdsldmod: init done
kdsld: PPP led: off (value=0)
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
[4294940453]DSP: XDU=6( ) OVR=0 MIPS_OVR=7
Jan 1 01:00:31 ctlmgr[470]: process priority is 19
Jan 1 01:00:31 ctlmgr[484]: [main.c:723] **** cwd -> {/}
MAC WLAN: 00:04:0E:DE:9F:48
avm_net_trace: New net trace device 'WLAN' registered with minor 0.
Jan 1 01:00:33 ctlmgr[484]: FactoryDefault=/etc/default/avm/user.cfg (user)
Jan 1 01:00:33 ctlmgr[484]: load_config(user): factory default loaded
Jan 1 01:00:33 ctlmgr[484]: FactoryDefault=/etc/default/avm/tr069.cfg (tr069)
Jan 1 01:00:33 ctlmgr[484]: load_config(tr069): factory default loaded
WSTART (Dec 4 2007 23:03:50)libwlanparam: config ok(1)
Wstart - made configure_wpa_authenticator
[Wstart] wlan_cal ist gesetzt: NVS DATEI WIRD MIT KALIBRIERUNGSWERTEN GEPATCHT!!
[Wstart] 9 Parameter werden gepatcht:
[Wstart] NVS DATEI WURDE GEPATCHT.
NVS File loaded.
Jan 1 01:00:34 ctlmgr[484]: dlopen(/usr/share/ctlmgr/libdect.so) failed: File d
Jan 1 01:00:34 ctlmgr[tiatm] ioctl: DSL parametrization is not supported on th.
[484]: intern[avm_power] : ethernet port 0 status 2
al vc[avm_power] : ethernet port 1 status 1
[avm_power] : ethernet port 2 status 1
Jan [avm_power] : ethernet port 3 status 1
1 01:00:34 c[avm_new]push_button_notify 'ATA-Schalter', key=button_key_8
tlmgr[484]: name=voip vpi=1 vci=32 encap=1 sep_config=0 vcc=0x2aab6b40
Jan 1 01:00:34 ctlmgr[484]: name=internet vpi=1 vci=32 encap=1 sep_config=0 0
Jan 1 01:00:34 ctlmgr[484]: AVM_TIATM_IOCTL_DSLPARAMS_GET failed ret=-1
Jan 1 01:00:35 ctlmgr[484]: mapping to info-LED already exist
Jan 1 01:00:35 ctlmgr[484]: box init ok
Jan 1 01:00:35 ctlmgr[484]: ipmasqfwruleex_parse ret=0 'udp 0.0.0.0:5060 0.0.0'
Jan 1 01:00:35 ctlmgr[484]: forwardrules: internal rule
Jan 1 01:00:35 ctlmgr[484]: ipmasqfwruleex_parse ret=0 'tcp 0.0.0.0:8089 0.0.0'
Jan 1 01:00:35 ctlmgr[484]: forwardrules: internal rule
Jan 1 01:00:35 ctlmgr[484]: ipmasqfwruleex_parse ret=0 'udp 0.0.0.0:5060 0.0.0'
Jan 1 01:00:35 ctlmgr[484]: forwardrules: internal rule
Jan 1 01:00:35 ctlmgr[484]: ipmasqfwruleex_parse ret=0 'tcp 0.0.0.0:5060 0.0.0'
Jan 1 01:00:35 ctlmgr[484]: forwardrules: internal rule
Jan 1 01:00:35 ctlmgr[484]: ipmasqfwruleex_parse ret=0 'udp 0.0.0.0:7078+32 0.'
Jan 1 01:00:35 ctlmgr[484]: forwardrules: internal rule
[ohio_vlynq_init] device 0
[ohio_vlynq_startup_link]
[setup_irq]: irq 29 irqaction->handler 0x9400592c (vlynq_interrupt+0x0/0x34 )
[setup_irq]: irq 79 irqaction->handler 0xc036008c (tiwlan_ddaVlynqIsr+0x0/0x28 )
wlan started (OK)
Wstart - made configure_and_start_ap_driver
WSTART: done(0)
[4294941455]DSP: XDU=8( ) OVR=0 MIPS_OVR=8
WLAN is enabled
[avm_new]push_button_notify 'ATA-Schalter', key=button_key_8
Jan 1 01:00:42 ctlmgr[484]: /dev/avm_power <-- MODE=ata
Jan 1 01:00:42 ctlmgr[484]: WAN (ata) led value = 1
Jan 1 01:00:42 ctlmgr[484]: [main.c:1042] *** WEBSERVER try to start ...
Jan 1 01:00:42 ctlmgr[484]: [../webserver/webserver.c:375] Initialisation of wn
Jan 1 01:00:42 ctlmgr[484]: startup (Dec 13 2007 16:18:20)
Jan 1 01:00:42 ctlmgr[484]: [main.c:1053] *** WEBSERVER started successfully
Jan 1 01:00:42 ctlmgr[484]: verbose: DISABLED
Starting websrv AVM web UI...httpd: bind: Address already in use
failed.
dnsmasq is disabled
Jan 1 01:00:48 multid[630]: startup ($Revision: 1.128 $$CompileDate: Dec 13 20)
[setup_irq]: irq 27 irqaction->handler 0x940ea5fc (cpmac_main_isr+0x0/0x78 )
Jan 1 01:00:48 multid[632]: new cpmac driver detected
Jan 1 01:00:48 multid[632]: enabling IP-Client-Mode
Jan 1 01:00:48 multid[632]: normal
Jan 1 01:00:48 multid[632]: if_clearipaddr: lan:0: SIOCSIFADDR failed - No suc)
[cpmac] cpmac_main_ioctl, unknown ioctl 35142
device eth0 entered promiscuous mode
device cpmac0 entered promiscuous mode
lan: port 1(eth0) entering learning state
lan: topology change detected, propagating
lan: port 1(eth0) entering forwarding state
device tiwlan0 entered promiscuous mode
lan: port 2(tiwlan0) entering learning state
lan: topology change detected, propagating
lan: port 2(tiwlan0) entering forwarding state
device wdsup0 entered promiscuous mode
lan: port 3(wdsup0) entering learning state
lan: topology change detected, propagating
lan: port 3(wdsup0) entering forwarding state
device wdsdw0 entered promiscuous mode
lan: port 4(wdsdw0) entering learning state
lan: topology change detected, propagating
lan: port 4(wdsdw0) entering forwarding state
device wdsdw1 entered promiscuous mode
lan: port 5(wdsdw1) entering learning state
lan: topology change detected, propagating
lan: port 5(wdsdw1) entering forwarding state
device wdsdw2 entered promiscuous mode
lan: port 6(wdsdw2) entering learning state
lan: topology change detected, propagating
lan: port 6(wdsdw2) entering forwarding state
device wdsdw3 entered promiscuous mode
lan: port 7(wdsdw3) entering learning state
lan: topology change detected, propagating
lan: port 7(wdsdw3) entering forwarding state
Jan 1 01:00:48 multid[632]: mrouter: using IGMPv3 for upstream interface wan
Jan 1 01:00:48 multid[632]: mrouter: using IGMPv3 for other interfaces
Jan 1 01:00:48 multid[632]: DHCPD on lan:0 skipped, is virtual interface
Jan 1 01:00:48 multid[632]: DDNS: no valid accounts
Jan 1 01:00:48 multid[632]: interface eth0 new.
Jan 1 01:00:48 multid[632]: interface lan new.
Jan 1 01:00:48 multid[632]: interface cpmac0 new.
Jan 1 01:00:48 multid[632]: interface cpmac0 up.
Jan 1 01:00:48 multid[632]: interface lo new.
Jan 1 01:00:48 multid[632]: interface lo up.
Jan 1 01:00:48 multid[632]: mrouter: lo: no multicast interface, ignored.
Jan 1 01:00:48 multid[632]: interface tiwlan0 new.
Jan 1 01:00:48 multid[632]: interface tiwlan0 up.
Jan 1 01:00:48 multid[632]: interface tiwlan1 new.
Jan 1 01:00:48 multid[632]: interface tiwlan2 new.
Jan 1 01:00:48 multid[632]: interface tiwlan3 new.
Jan 1 01:00:48 multid[632]: interface wdsup0 new.
Jan 1 01:00:48 multid[632]: interface wdsup0 up.
Jan 1 01:00:48 multid[632]: interface wdsdw0 new.
Jan 1 01:00:48 multid[632]: interface wdsdw0 up.
Jan 1 01:00:48 multid[632]: interface wdsdw1 new.
Jan 1 01:00:48 multid[632]: interface wdsdw1 up.
Jan 1 01:00:48 multid[632]: interface wdsdw2 new.
Jan 1 01:00:48 multid[632]: interface wdsdw2 up.
Jan 1 01:00:48 multid[632]: interface wdsdw3 new.
Jan 1 01:00:48 multid[632]: interface wdsdw3 up.
Jan 1 01:00:48 multid[632]: interface eth0 new.
Jan 1 01:00:48 multid[632]: interface lan new.
Jan 1 01:00:48 multid[632]: CONFIG_LOGD disabled: No UPnP-Device for avmlogd
Jan 1 01:00:48 multid[632]: verbose: DISABLED
Jan 1 01:00:50 dsld[643]: startup (Dec 13 2007 16:19:18)
Jan 1 01:00:50 dsld[643]: new cpmac driver detected
Jan 1 01:00:50 dsld[643]: no need to run, only igd (ipclient)
Jan 1 01:00:50 dsld[647]: verbose: DISABLED
Dec 16 20:07:11 telefon[649]: use clock_gettime(CLOCK_MONOTONIC)!
Dec 16 20:07:11 telefon[649]: set initial telefon time from linux time to 20:07!
[4294942459]DSP: XDU=17( ) OVR=0 MIPS_OVR=17
Dec 16 20:07:11 telefon[649]: SIGCHLD received!
Dec 16 20:07:11 telefon[649]: WARNING No config file '/var/flash/fx_def' !
Dec 16 20:07:13 voipd[663]: startup (AVM FRITZ!Box Fon Speedport W900V 29.04.48)
Dec 16 20:07:13 voipd[663]: using capi controller 5
Dec 16 20:07:13 voipd[663]: using b1 protocol 10 for 8kHz
Dec 16 20:07:13 voipd[663]: using b1 protocol 11 for 16kHz
create sema UPNPAPI_DATA_phonebook
Dec 16 20:07:13 voipd[663]: tel: supported
Dec 16 20:07:13 voipd[663]: ENUM NOT enabled
Dec 16 20:07:13 voipd[663]: enumdomain: e164.arpa
Dec 16 20:07:13 voipd[663]: enumdomain: e164.org
Dec 16 20:07:13 voipd[663]: T38 Init Params t38[16644] Dec 13 2007 16:11:36
Dec 16 20:07:13 voipd[663]: T.38 supported
[avm_led] virt led not registered
[avm_led] format error: "SET Name,Instanz = state"
[4294942699]BLK: DECT StartUp, mode = NORMAL, firmware: 00.31.12
Dec 16 20:07:13 voipd[663]: VoIP led value = 0
Dec 16 20:07:13 voipd[663]: 0: 04188249300@freenet.de configured (STUN)
Dec 16 20:07:13 voipd[663]: dns: _stun._udp.freenet.de: query
Dec 16 20:07:13 voipd[663]: 1 useragent configured
Dec 16 20:07:13 voipd[663]: INFO led: off (value=0)
Dec 16 20:07:13 voipd[663]: VoIP SRTP led value = 0
Dec 16 20:07:13 voipd[663]: priority is -20
Dec 16 20:07:13 voipd[663]: encaplen 14
Dec 16 20:07:13 voipd[663]: brutto speed 1184000/160000 voip speed 144000
Dec 16 20:07:13 voipd[663]: connstatus 0 -> 5
Dec 16 20:07:13 voipd[663]: PCMA/8000/1: 98933 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: PCMU/8000/1: 98933 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: G726-32/8000/1: 56533 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: G726-40/8000/1: 70666 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: G726-24/8000/1: 56533 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: iLBC/8000/1: 42400 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: G729/8000/1: 28266 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: Speex/8000/1: 63600 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: PCMA/16000/1: 197866 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: PCMU/16000/1: 197866 bits/second (encaplen=14,30ms)
Dec 16 20:07:13 voipd[663]: PCMA/8000/1: 106000 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: PCMU/8000/1: 106000 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: G726-32/8000/1: 63600 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: G726-40/8000/1: 84800 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: G726-24/8000/1: 63600 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: iLBC/8000/1: 63600 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: G729/8000/1: 42400 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: Speex/8000/1: 63600 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: PCMA/16000/1: 212000 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: PCMU/16000/1: 212000 bits/second (encaplen=14,20ms)
Dec 16 20:07:13 voipd[663]: verbose: DISABLED
Dec 16 20:07:14 voipd[663]: 04188249300@freenet.de: REGISTER already in progress
run_clock demon stAR7WDT: System Init UEberwachung abgeschlossen (187580 ms noc)
arted
SysRq : Changing Loglevel
Loglevel set to 4
Dec 16 20:07:15 igdd[604]: OemStringData.MAC:00040EDE9F46
Dec 16 20:07:15 igdd[604]: OemStringData.BOXID='FRITZ!Box Fon Speedport W900V','
Dec 16 20:07:15 igdd[604]: desc=FRITZ!Box Fon Speedport W900V UPnP/1.0 AVM FRIT8
Dec 16 20:07:15 igdd[604]: startup (Dec 13 2007 16:17:19)
Dec 16 20:07:15 igdd[604]: verbose: DISABLED
rc.mod version -9655
crond is disabled
telnetd is disabled
Starting webinterface...done.
[4294943459]DSP: XDU=2( ) OVR=0 MIPS_OVR=2
Starting syslogd...done.
downloader is disabled
Setting up virtual network interface ... done.
Disk spindown is disabled
cifsmount is disabled
dnsmasq is disabled
Starting ssh server...done.
inadyn is disabled
Looking for user 'ntp' ... created - now saving to data buffer ... done
Starting ntp server...
* Stopping multid ntp client...
done.
openvpn is disabled
Starting openvpn_nirvana ... done.
Looking for user 'samba' ... adduser: /home/samba: File exists
created - now saving to data buffer ... done
Starting samba nmbd...done.
Starting samba smbd...done.
swap is disabled
ls
[4294951246]DSP: XDU=1( ) OVR=0 MIPS_OVR=1