rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65520
[ 0.000000] HighMem 65520 -> 65520
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65520
[ 0.000000] On node 0 totalpages: 65520
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60945 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6120 checksum 0
[ 0.000000] ACPI: RSDP 000F6120, 0014 (r0 VIAP4M)
[ 0.000000] ACPI: RSDT 0FFF3000, 0028 (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 0FFF30C0, 2EE3 (r1 VIAP4M AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0FFF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
[ 0.000000] Built 1 zonelists. Total pages: 65009
[ 0.000000] Kernel command line: root=UUID=a170264f-9ac8-4202-81a5-d73e267154b6 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0120c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1597.333 MHz processor.
[ 18.763816] Console: colour VGA+ 80x25
[ 18.764141] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 18.764420] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 18.774219] Memory: 248332k/262080k available (2015k kernel code, 13184k reserved, 916k data, 364k init, 0k highmem)
[ 18.774236] virtual kernel memory layout:
[ 18.774237] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 18.774240] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.774241] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 18.774243] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 18.774245] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 18.774247] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 18.774249] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 18.774254] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.774319] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 18.854346] Calibrating delay using timer specific routine.. 3199.25 BogoMIPS (lpj=6398506)
[ 18.854386] Security Framework v1.0.0 initialized
[ 18.854398] SELinux: Disabled at boot.
[ 18.854419] Mount-cache hash table entries: 512
[ 18.854649] CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 18.854670] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 18.854677] CPU: L2 cache: 512K
[ 18.854682] CPU: Hyper-Threading is disabled
[ 18.854688] CPU: After all inits, caps: 3febf9ff 00000000 00000000 0000b080 00000000 00000000 00000000
[ 18.854709] Compat vDSO mapped to ffffe000.
[ 18.854732] Checking 'hlt' instruction... OK.
[ 18.870591] SMP alternatives: switching to UP code
[ 18.870941] Freeing SMP alternatives: 11k freed
[ 18.871495] Early unpacking initramfs... done
[ 19.401783] ACPI: Core revision 20070126
[ 19.401869] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.404038] ACPI: setting ELCR to 0200 (from 0a20)
[ 19.407318] CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04
[ 19.407328] SMP motherboard not detected.
[ 19.407332] Local APIC not detected. Using dummy APIC emulation.
[ 19.407397] Brought up 1 CPUs
[ 19.407611] Booting paravirtualized kernel on bare hardware
[ 19.407717] Time: 8:42:45 Date: 11/15/107
[ 19.407756] NET: Registered protocol family 16
[ 19.407916] EISA bus registered
[ 19.407938] ACPI: bus type pci registered
[ 19.430755] PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=2
[ 19.430759] PCI: Using configuration type 1
[ 19.430762] Setting up standard PCI resources
[ 19.432784] ACPI: EC: Look up EC in DSDT
[ 19.437754] ACPI: Interpreter enabled
[ 19.437760] ACPI: (supports S0 S1 S4 S5)
[ 19.437795] ACPI: Using PIC for interrupt routing
[ 19.444793] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.444820] PCI: Probing PCI hardware (bus 00)
[ 19.446234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.469950] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 19.470153] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.470415] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 19.470648] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 19.470811] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.470841] pnp: PnP ACPI init
[ 19.470858] ACPI: bus type pnp registered
[ 19.475850] pnp: PnP ACPI: found 15 devices
[ 19.475855] ACPI: ACPI bus type pnp unregistered
[ 19.475863] PnPBIOS: Disabled by ACPI PNP
[ 19.475957] PCI: Using ACPI for IRQ routing
[ 19.475962] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.550536] NET: Registered protocol family 8
[ 19.550539] NET: Registered protocol family 20
[ 19.550665] pnp: 00:00: iomem range 0xcf000-0xcffff has been reserved
[ 19.550670] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 19.550675] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 19.550679] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 19.554284] Time: tsc clocksource has been installed.
[ 19.581263] PCI: Bridge: 0000:00:01.0
[ 19.581266] IO window: disabled.
[ 19.581274] MEM window: dc000000-ddffffff
[ 19.581281] PREFETCH window: d4000000-dbffffff
[ 19.581289] PCI: Bridge: 0000:00:0b.0
[ 19.581291] IO window: disabled.
[ 19.581299] MEM window: e0000000-e00fffff
[ 19.581305] PREFETCH window: df000000-dfffffff
[ 19.581333] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.581369] NET: Registered protocol family 2
[ 19.618347] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 19.618415] TCP established hash table entries: 8192 (order: 4, 98304 bytes)
[ 19.618521] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 19.618592] TCP: Hash tables configured (established 8192 bind 8192)
[ 19.618596] TCP reno registered
[ 19.630497] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 20.130778] it is
[ 20.679086] Freeing initrd memory: 7053k freed
[ 20.679653] audit: initializing netlink socket (disabled)
[ 20.679681] audit(1197708165.772:1): initialized
[ 20.683439] VFS: Disk quotas dquot_6.5.1
[ 20.683532] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.683708] io scheduler noop registered
[ 20.683712] io scheduler anticipatory registered
[ 20.683715] io scheduler deadline registered
[ 20.683746] io scheduler cfq registered (default)
[ 20.683766] PCI: VIA PCI bridge detected. Disabling DAC.
[ 20.683830] Boot video device is 0000:01:00.0
[ 20.684133] isapnp: Scanning for PnP cards...
[ 21.038823] isapnp: No Plug & Play device found
[ 21.085604] Real Time Clock Driver v1.12ac
[ 21.085756] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.085885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.086304] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 21.087385] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.087848] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 21.089250] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.089655] input: Macintosh mouse button emulation as /class/input/input0
[ 21.089812] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 21.090277] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.090287] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.090575] mice: PS/2 mouse device common for all mice
[ 21.090773] EISA: Probing bus 0 at eisa.0
[ 21.090824] EISA: Detected 0 cards.
[ 21.091158] TCP cubic registered
[ 21.091186] NET: Registered protocol family 1
[ 21.091230] Using IPI No-Shortcut mode
[ 21.091509] Magic number: 3:694:725
[ 21.091799] hash matches device 0000:01:00.0
[ 21.092454] Freeing unused kernel memory: 364k freed
[ 21.130207] input: AT Translated Set 2 keyboard as /class/input/input1
[ 22.451430] AppArmor: AppArmor initialized<5>audit(1197708167.272:2): type=1505 info="AppArmor initialized" pid=1176
[ 22.466588] fuse init (API version 7.8)
[ 22.477104] Failure registering capabilities with primary security module.
[ 22.499957] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 22.499969] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 23.469365] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[ 23.469951] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 23.469958] PCI: setting IRQ 5 as level-triggered
[ 23.469965] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 23.470411] tulip0: MII transceiver #1 config 3100 status 7809 advertising 01e1.
[ 23.473828] eth0: Lite-On 82c168 PNIC rev 32 at Port 0xd000, 00:C0:F0:5B:5E:19, IRQ 5.
[ 23.545815] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.545824] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.547016] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 23.547626] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 23.547632] PCI: setting IRQ 11 as level-triggered
[ 23.547639] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 23.547650] PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
[ 23.547680] VP_IDE: chipset revision 6
[ 23.547684] VP_IDE: not 100% native mode: will probe irqs later
[ 23.547703] VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
[ 23.547714] ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
[ 23.547730] ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:pio
[ 23.547740] Probing IDE interface ide0...
[ 23.586950] usbcore: registered new interface driver usbfs
[ 23.587007] usbcore: registered new interface driver hub
[ 23.587048] usbcore: registered new device driver usb
[ 23.588830] USB Universal Host Controller Interface driver v3.0
[ 23.869217] Floppy drive(s): fd0 is 1.44M
[ 23.940030] FDC 0 is a post-1991 82077
[ 24.025682] hda: WDC WD2000JB-00GVA0, ATA DISK drive
[ 5.288000] Marking TSC unstable due to: possible TSC halt in C2.
[ 5.296000] Time: acpi_pm clocksource has been installed.
[ 5.916000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.936000] Probing IDE interface ide1...
[ 6.800000] hdc: RIDATA DVD+RW/+R DRIVE, ATAPI CD/DVD-ROM drive
[ 7.136000] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.160000] SCSI subsystem initialized
[ 7.172000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 7.172000] ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.172000] uhci_hcd 0000:00:11.2: UHCI Host Controller
[ 7.172000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
[ 7.172000] uhci_hcd 0000:00:11.2: irq 11, io base 0x0000d800
[ 7.176000] usb usb1: configuration #1 chosen from 1 choice
[ 7.176000] hub 1-0:1.0: USB hub found
[ 7.176000] hub 1-0:1.0: 2 ports detected
[ 7.176000] libata version 2.21 loaded.
[ 7.280000] ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.280000] uhci_hcd 0000:00:11.3: UHCI Host Controller
[ 7.280000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
[ 7.280000] uhci_hcd 0000:00:11.3: irq 11, io base 0x0000dc00
[ 7.280000] usb usb2: configuration #1 chosen from 1 choice
[ 7.280000] hub 2-0:1.0: USB hub found
[ 7.280000] hub 2-0:1.0: 2 ports detected
[ 7.384000] ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.384000] uhci_hcd 0000:00:11.4: UHCI Host Controller
[ 7.384000] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
[ 7.384000] uhci_hcd 0000:00:11.4: irq 11, io base 0x0000e000
[ 7.384000] usb usb3: configuration #1 chosen from 1 choice
[ 7.384000] hub 3-0:1.0: USB hub found
[ 7.384000] hub 3-0:1.0: 2 ports detected
[ 7.488000] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.540000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e0004000-e00047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 7.588000] hda: max request size: 512KiB
[ 7.628000] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(33)
[ 7.632000] hda: cache flushes supported
[ 7.632000] hda: hda1 hda2 < hda5 >
[ 7.692000] hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 7.692000] Uniform CD-ROM driver Revision: 3.20
[ 7.936000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 8.060000] usb 2-2: device descriptor read/64, error -71
[ 8.104000] Attempting manual resume
[ 8.104000] swsusp: Resume From Partition 3:5
[ 8.104000] PM: Checking swsusp image.
[ 8.124000] PM: Resume from disk failed.
[ 8.196000] kjournald starting. Commit interval 5 seconds
[ 8.200000] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.284000] usb 2-2: device descriptor read/64, error -71
[ 8.500000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 8.624000] usb 2-2: device descriptor read/64, error -71
[ 8.816000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0a014e7f43]
[ 8.852000] usb 2-2: device descriptor read/64, error -71
[ 9.068000] usb 2-2: new low speed USB device using uhci_hcd and address 4
[ 9.476000] usb 2-2: device not accepting address 4, error -71
[ 9.588000] usb 2-2: new low speed USB device using uhci_hcd and address 5
[ 9.996000] usb 2-2: device not accepting address 5, error -71
[ 17.324000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.400000] agpgart: Detected VIA P4M266x/P4N266 chipset
[ 17.408000] agpgart: AGP aperture is 64M @ 0xd0000000
[ 17.432000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.444000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.536000] ieee80211_crypt: registered algorithm 'NULL'
[ 17.540000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 17.540000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 17.572000] bcm43xx driver
[ 17.572000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 18.692000] irda_init()
[ 18.692000] NET: Registered protocol family 23
[ 18.996000] input: PC Speaker as /class/input/input2
[ 19.196000] nvidia: module license 'NVIDIA' taints kernel.
[ 19.468000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 19.468000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007
[ 19.976000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 19.980000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.980000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 20.068000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 20.068000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
[ 20.356000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114
[ 20.748000] SoftMAC: Open Authentication completed with 00:c0:49:ee:81:da
[ 21.668000] NET: Registered protocol family 17
[ 21.708000] loop: module loaded
[ 21.752000] lp0: using parport0 (interrupt-driven).
[ 21.876000] Adding 746980k swap on /dev/hda5. Priority:-1 extents:1 across:746980k
[ 22.164000] EXT3 FS on hda1, internal journal