;
; Static extension configuration file, used by ; the pbx_config module. This is where you configure all your ; inbound and outbound calls in Asterisk.
;
;
; The "General" category is for certain variables.
;
[general]
;
; If static is set to no, or omitted, then the pbx_config will rewrite ; this file when extensions are modified. Remember that all comments ; made in the file will be lost when that happens.
;
; XXX Not yet implemented XXX
;
static=yes
;
; if static=yes and writeprotect=no, you can save dialplan by ; CLI command 'save dialplan' too ; writeprotect=no
; You can include other config files, use the #include command (without the ';') ; Note that this is different from the "include" command that includes contexts within ; other contexts. The #include command works in all asterisk configuration files.
;#include "filename.conf"
; The "Globals" category contains global variables that can be referenced ; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental variable ; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid ; [globals]
;CONSOLE=Console/dsp ; Console interface for demo
;CONSOLE=Zap/1
;CONSOLE=Phone/phone0
CONSOLE=SIP/518
IAXINFO=guest ; IAXtel username/password
;IAXINFO=myuser:mypass
;TRUNK=Modem/g1 ; Trunk interface
;TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0)
;TRUNK=IAX2/user:pass@provider
;TRUNK=Modem/g1
;TRUNKMSD=1
TRUNK=SIP/iconnecthere
TRUNKMSD=1
;
; Any category other than "General" and "Globals" represent ; extension contexts, which are collections of extensions.
;
; Extension names may be numbers, letters, or combinations ; thereof. If an extension name is prefixed by a '_'
; character, it is interpreted as a pattern rather than a ; literal. In patterns, some characters have special meanings:
;
; X - any digit from 0-9
; Z - any digit from 1-9
; N - any digit from 2-9
; [1235-9] - any digit in the brackets (in this example, 1,2,3,5,6,7,8,9)
; . - wildcard, matches anything remaining (e.g. _9011. matches
; anything starting with 9011 excluding 9011 itself)
;
; For example the extension _NXXXXXX would match normal 7 digit dialings, ; while _1NXXNXXXXXX would represent an area code plus phone number ; preceeded by a one.
;
; Contexts contain several lines, one for each step of each ; extension, which can take one of two forms as listed below, ; with the first form being preferred. One may include another ; context in the current one as well, optionally with a ; date and time. Included contexts are included in the order ; they are listed.
;
;[context]
;exten => someexten,priority,application(arg1,arg2,...)
;exten => someexten,priority,application,arg1|arg2...
;
; Timing list for includes is
;
; <time range>|<days of week>|<days of month>|<months>
;
;include => daytime|9:00-17:00|mon-fri|*|* ; ; ignorepat can be used to instruct drivers to not cancel dialtone upon ; receipt of a particular pattern. The most commonly used example is ; of course '9' like this:
;
;ignorepat => 9
;
; so that dialtone remains even after dialing a 9.
;
[incoming]
include => auto-answer
[trusted-handset]
include => auto-answer
include => local
;include => longdistance
;include => international
exten => _900.,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _900.,2,Congestion
;
; Here are the entries you need to participate in the IAXTEL ; call routing system. Most IAXTEL numbers begin with 1-700, but ; there are exceptions. For more information, and to sign ; up, please go to www.gnophone.com or www.iaxtel.com ; [iaxtel700] exten => _91700NXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel)
[iaxprovider]
;switch => IAX2/user:[key]@myserver/mycontext
[trunkint]
;
; International long distance through trunk ; exten => _9011.,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _9011.,2,Congestion
[trunkld]
;
; Long distance context accessed through trunk ; exten => _91NXXNXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91NXXNXXXXXX,2,Congestion
[trunklocal]
;
; Local seven-digit dialing accessed through trunk interface ; exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _9NXXXXXX,2,Congestion
[trunktollfree]
;
; Long distance context accessed through trunk interface ; exten => _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91800NXXXXXX,2,Congestion
exten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91888NXXXXXX,2,Congestion
exten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91877NXXXXXX,2,Congestion
exten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91866NXXXXXX,2,Congestion
[international]
;
; Master context for international long distance ; ignorepat => 9 include => longdistance include => trunkint
[longdistance]
;
; Master context for long distance
;
ignorepat => 9
include => local
include => trunkld
[local]
;
; Master context for local, toll-free, and iaxtel calls only ; ignorepat => 9 include => default include => parkedcalls include => trunklocal include => iaxtel700 include => trunktollfree include => iaxprovider ; ; You can use an alternative switch type as well, to resolve ; extensions that are not known here, for example with remote ; IAX switching you transparently get access to the remote ; Asterisk PBX ; ; switch => IAX2/user:password@bigserver/local
;include => voicemail
[macro-stdexten];
;
; Standard extension macro:
; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
;
exten => s,1,Dial(${ARG2},20) ; Ring the interface, 20 seconds maximum
exten => s,2,Voicemail(u${ARG1}) ; If unavailable, send to voicemail w/ unavail announce
exten => s,3,Goto(default,s,1) ; If they press #, return to start
exten => s,102,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announce
exten => s,103,Goto(default,s,1) ; If they press #, return to start
[auto-answer]
exten => s,1,Wait,1 ; Wait a second, just for fun
exten => s,2,Answer ; Answer the line
exten => s,3,BackGround(demo-moreinfo) ; Play some instructions
exten => s,4,DigitTimeout,5 ; Set Digit Timeout to 5 seconds
exten => s,5,ResponseTimeout,10 ; Set Response Timeout to 10 seconds
exten => 2,2,Goto(s,6)
exten => 1000,1,Goto(default,s,1)
exten => _X.,1,NoOP(${EXTEN})
;[demo]
;;
;; We start with what to do when a call first comes in.
;;
;exten => s,1,Wait,1 ; Wait a second, just for fun
;exten => s,2,Answer ; Answer the line
;exten => s,3,DigitTimeout,5 ; Set Digit Timeout to 5 seconds
;exten => s,4,ResponseTimeout,10 ; Set Response Timeout to 10 seconds
;;exten => s,5,BackGround(U2.mp3) ; Play a congratulatory message
;;exten => s,5,BackGround(demo-congrats) ; Play a congratulatory message
;exten => s,5,BackGround(exoweb-welcome) ; Play a congratulatory message
;;exten => s,5,MP3Player(exoweb-welcome) ; Play a congratulatory message
;exten => s,6,BackGround(demo-instruct) ; Play some instructions
;
;exten => 2,1,BackGround(demo-moreinfo) ; Give some more information.
;exten => 2,2,Goto(s,6)
;
;exten => 3,1,SetLanguage(fr) ; Set language to french
;exten => 3,2,Goto(s,5) ; Start with the congratulations
;
;exten => 1000,1,Goto(default,s,1)
;
; We also create an example user, 1234, who is on the console and has ; voicemail, etc.
;
;exten => 1234,1,Playback(transfer,skip) ; "Please hold while..."
; ; (but skip if channel is not up)
;exten => 1234,2,Macro(stdexten,1234,${CONSOLE})
;
;exten => 1235,1,Voicemail(u1234) ; Right to voicemail
;
;exten => 1236,1,Dial(Console/dsp) ; Ring forever
;exten => 1236,2,Voicemail(u1234) ; Unless busy
;;
;; # for when they're done with the demo ;;
;exten => #,1,Playback(demo-thanks) ; "Thanks for trying the demo"
;exten => #,2,Hangup ; Hang them up.
;
; A timeout and "invalid extension rule"
;
exten => t,1,Goto(#,1) ; If they take too long, give up
exten => i,1,Playback(invalid) ; "That's not valid, try again"
;
; Create an extension, 500, for dialing the ; Asterisk demo.
;
exten => 500,1,Playback(demo-abouttotry); Let them know what's going on
exten => 500,2,Dial(IAX2/guest@misery.digium.com/s@default) ; Call the Asterisk demo
exten => 500,3,Playback(demo-nogo) ; Couldn't connect to the demo site
exten => 500,4,Goto(s,6) ; Return to the start over message.
;
; Create an extension, 600, for evaulating echo latency.
;
exten => 600,1,Playback(demo-echotest) ; Let them know what's going on
exten => 600,2,Echo ; Do the echo test
exten => 600,3,Playback(demo-echodone) ; Let them know it's over
exten => 600,4,Goto(s,6) ; Start over
;
; Give voicemail at extension 8500
;
exten => 8500,1,VoicemailMain
exten => 8500,2,Goto(s,6)
;
; Here's what a phone entry would look like (IXJ for example) ; exten => 1265,1,Dial(Phone/phone0,15) exten => 1265,2,Goto(s,5)
;[mainmenu]
;
; Example "main menu" context with submenu ; ;exten => s,1,Answer
;exten => s,2,Background(thanks) ; "Thanks for calling press 1 for sales, 2 for support, ..."
;exten => 1,1,Goto(submenu,s,1)
;exten => 2,1,Hangup
;include => default
;
;[submenu]
;exten => s,1,Ringing ; Make them comfortable with 2 seconds of ringback
;exten => s,2,Wait,2
;exten => s,3,Background(submenuopts) ; "Thanks for calling the sales department. Press 1 for steve, 2 for..."
;exten => 1,1,Goto(default,steve,1)
;exten => 2,1,Goto(default,mark,2)
[default]
;
; By default we include the demo. In a production system, you ; probably don't want to have the demo there.
;
include => auto-answer
; Real extensions would go here. Generally you want real extensions to be 4 or 5
; digits long (although there is no such requirement) and start with a single
; digit that is fairly large (like 6 or 7) so that you have plenty of room to
; overlap extensions and menu options without conflict. You can alias them with
; names, too and use global variables
;exten => 519,1,Dial(SIP/519),20,t)
exten => 518,1,Macro(stdexten,518,SIP/518)
exten => 519,1,Macro(stdexten,519,SIP/519)
exten => 520,1,Macro(stdexten,520,SIP/520)
;exten => 6275,1,Macro(stdexten,6275,${MARK}) ; assuming ${MARK} is something like Zap/2
;exten => mark,1,Goto(6275|1) ; alias mark to 6275
;exten => 6236,1,Macro(stdexten,6236,${WIL}) ; Ditto for wil
;exten => wil,1,Goto(6236|1)
;
; Some other handy things are an extension for checking voicemail via
; voicemailmain
;
;exten => 8500,1,VoicemailMain
;exten => 8500,2,Hangup
;
; Or a conference room (you'll need to edit meetme.conf to enable this room)
;
;include => meetme
;exten => 8600,1,Meetme(|Md)
;
; Or playing an announcement to the called party, as soon it answers
;
;exten = 8700,1,Dial(${MARK},30,A(/path/to/my/announcemsg))
;
; For more information on applications, just type "show applications" at your
; friendly Asterisk CLI prompt.
;
; 'show application <command>' will show details of how you
; use that particular application in this file, the dial plan.
;