Something

wpa_supplicant -D wext -i eth1 -c /home/tim/scripts/wpa_supplicant.conf -ddd
Initializing interface 'eth1' conf '/home/tim/scripts/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/home/tim/scripts/wpa_supplicant.conf' -> '/home/tim/scripts/wpa_supplicant.conf'
Reading configuration file '/home/tim/scripts/wpa_supplicant.conf'
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=4):
     44 43 45 53                                       DCES
scan_ssid=1 (0x1)
proto: 0x1
key_mgmt: 0x2
pairwise: 0x18
group: 0x1e
PSK (ASCII passphrase) - hexdump_ascii(len=47): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='DCES'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=16 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:1c:bf:31:bf:38
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=4):
     44 43 45 53                                       DCES
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 230 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:18:39:02:db:14 ssid='DCES_ClassAccess' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 230 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:18:39:02:db:14 ssid='DCES_ClassAccess' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=4):
     44 43 45 53                                       DCES
Scan timeout - try to get results
Received 423 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:00:c5:d1:b2:14 ssid='<hidden>' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   skip - SSID mismatch
1: 00:18:39:02:db:14 ssid='DCES_ClassAccess' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE