rendered paste bodyLinux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f690000 (usable) BIOS-e820: 000000003f690000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)118MB HIGHMEM available.896MB LOWMEM available.found SMP MP-table at 000f7660Entering add_active_range(0, 0, 259728) 0 entries of 256 usedZone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259728early_node_map[1] active PFN ranges 0: 0 -> 259728On node 0 totalpages: 259728 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 237 pages used for memmap HighMem zone: 30115 pages, LIFO batch:7DMI present.ACPI: RSDP 000F7530, 0014 (r0 PTLTD )ACPI: RSDT 3F691AB7, 0044 (r1 MaxDat MaxSys.. 6040000 LTP 0)ACPI: FACP 3F697CAA, 0074 (r1 MaxDat MaxSys.. 6040000 LOHR 5A)ACPI: DSDT 3F69248D, 581D (r1 MaxDat MaxSys.. 6040000 MSFT 100000E)ACPI: FACS 3F698FC0, 0040ACPI: APIC 3F697D1E, 0068 (r1 MaxDat MaxSys.. 6040000 LOHR 5A)ACPI: HPET 3F697D86, 0038 (r1 MaxDat MaxSys.. 6040000 LOHR 5A)ACPI: MCFG 3F697DBE, 003C (r1 MaxDat MaxSys.. 6040000 LOHR 5A)ACPI: APIC 3F697DFA, 0068 (r1 MaxDat MaxSys.. 6040000 LTP 0)ACPI: BOOT 3F697E62, 0028 (r1 MaxDat MaxSys.. 6040000 LTP 1)ACPI: SLIC 3F697E8A, 0176 (r1 MaxDat MaxSys.. 6040000 LTP 0)ACPI: SSDT 3F691AFB, 0500 (r1 PmRef CpuPm 3000 INTL 20050228)ACPI: BIOS bug: multiple APIC/MADT found, using 0ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.orgACPI: PM-Timer IO Port: 0x1008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Processor #0 6:15 APIC version 20ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Processor #1 6:15 APIC version 20ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode: Flat. Using 1 I/O APICsACPI: HPET id: 0x8086a201 base: 0xfed00000Using ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 50000000 (gap: 40000000:a0000000)Built 1 zonelists. Total pages: 257699Kernel command line: root=/dev/sda6 ro vga=791mapped APIC to ffffd000 (fee00000)mapped IOAPIC to ffffc000 (fec00000)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table entries: 4096 (order: 12, 16384 bytes)Detected 1663.228 MHz processor.Console: colour dummy device 80x25Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 1020860k/1038912k available (1688k kernel code, 17296k reserved, 653k data, 244k init, 121408k highmem)virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc034f000 - 0xc038c000 ( 244 kB) .data : 0xc02a62bf - 0xc03497e4 ( 653 kB) .text : 0xc0100000 - 0xc02a62bf (1688 kB)Checking if this processor honours the WP bit even in supervisor mode... Ok.hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0hpet0: 3 64-bit timers, 14318180 HzCalibrating delay using timer specific routine.. 3330.64 BogoMIPS (lpj=6661285)Security Framework v1.0.0 initializedSELinux: Disabled at boot.Capability LSM initializedMount-cache hash table entries: 512CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001monitor/mwait feature present.using mwait in idle threads.CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 2048KCPU: Physical Processor ID: 0CPU: Processor Core ID: 0CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.Compat vDSO mapped to ffffe000.Checking 'hlt' instruction... OK.SMP alternatives: switching to UP codeACPI: Core revision 20070126CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06SMP alternatives: switching to SMP codeBooting processor 1/1 eip 3000Initializing CPU#1Calibrating delay using timer specific routine.. 3326.31 BogoMIPS (lpj=6652621)CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001monitor/mwait feature present.CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 2048KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001Intel machine check architecture supported.Intel machine check reporting enabled on CPU#1.CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06Total of 2 processors activated (6656.95 BogoMIPS).ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1checking TSC synchronization [CPU#0 -> CPU#1]: passed.Brought up 2 CPUsmigration_cost=45Booting paravirtualized kernel on bare hardwareNET: Registered protocol family 16ACPI: bus type pci registeredPCI: Using MMCONFIGSetting up standard PCI resourcesACPI: Interpreter enabledACPI: (supports S0 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Probing PCI hardware (bus 00)PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCOPCI quirk: region 1180-11bf claimed by ICH6 GPIOPCI: Transparent bridge - 0000:00:1e.0PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#07) (try 'pci=assign-busses')Please report the result to linux-kernel to fix this permanentlyACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 9 devicesACPI: ACPI bus type pnp unregisteredPnPBIOS: Disabled by ACPI PNPPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportNET: Registered protocol family 8NET: Registered protocol family 20ACPI: RTC can wake from S4pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reservedpnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reservedpnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reservedpnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reservedTime: tsc clocksource has been installed.PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d6000000-d7ffffff PREFETCH window: d0000000-d1ffffffPCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: d8000000-d9ffffff PREFETCH window: d2000000-d3ffffffPCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: da000000-dbffffff PREFETCH window: d4000000-d5ffffffPCI: Bus 8, cardbus bridge: 0000:07:01.0 IO window: 00005000-000050ff IO window: 00005400-000054ff PREFETCH window: 50000000-53ffffff MEM window: 54000000-57ffffffPCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: dc000000-dc0fffff PREFETCH window: 50000000-53ffffffACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:1c.0 to 64ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17PCI: Setting latency timer of device 0000:00:1c.1 to 64ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1c.2 to 64PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)PCI: Setting latency timer of device 0000:00:1e.0 to 64PCI: Enabling device 0000:07:01.0 (0000 -> 0003)ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:07:01.0 to 64NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1572864 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredchecking if image is initramfs...<6>Switched to high resolution mode on CPU 1Switched to high resolution mode on CPU 0 it isFreeing initrd memory: 5347k freedSimple Boot Flag value 0x82 read from CMOS RAM was invalidSimple Boot Flag at 0x36 set to 0x1audit: initializing netlink socket (disabled)audit(1197447488.864:1): initializedhighmem bounce pool size: 64 pagesVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)Boot video device is 0000:00:02.0PCI: Setting latency timer of device 0000:00:1c.0 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.0:pcie00]Allocate Port Service[0000:00:1c.0:pcie02]Allocate Port Service[0000:00:1c.0:pcie03]PCI: Setting latency timer of device 0000:00:1c.1 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.1:pcie00]Allocate Port Service[0000:00:1c.1:pcie02]Allocate Port Service[0000:00:1c.1:pcie03]PCI: Setting latency timer of device 0000:00:1c.2 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.2:pcie00]Allocate Port Service[0000:00:1c.2:pcie02]Allocate Port Service[0000:00:1c.2:pcie03]vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 7872kvesafb: mode is 1024x768x16, linelength=2048, pages=4vesafb: protected mode interface info at 00ff:44f0vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0Console: switching to colour frame buffer device 128x48fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundhpet_resources: 0xfed00000 is busySerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksizePNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2Q] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all miceTCP bic registeredNET: Registered protocol family 1NET: Registered protocol family 17Using IPI No-Shortcut modeFreeing unused kernel memory: 244k freedinput: AT Translated Set 2 keyboard as /class/input/input0ACPI: SSDT 3F69225C, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20050228)ACPI: SSDT 3F691FFB, 01DC (r1 PmRef Cpu0Cst 3001 INTL 20050228)ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])ACPI: Processor [CPU0] (supports 8 throttling states)ACPI: SSDT 3F692404, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050228)ACPI: SSDT 3F6921D7, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])ACPI: Processor [CPU1] (supports 8 throttling states)Marking TSC unstable due to: possible TSC halt in C2.Time: hpet clocksource has been installed.ACPI: Thermal Zone [TZ00] (35 C)usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbUSB Universal Host Controller Interface driver v3.0ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19PCI: Setting latency timer of device 0000:00:1d.0 to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20PCI: Setting latency timer of device 0000:00:1d.1 to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2SCSI subsystem initializeduhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedlibata version 2.21 loaded.ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1d.2 to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17PCI: Setting latency timer of device 0000:00:1d.3 to 64uhci_hcd 0000:00:1d.3: UHCI Host Controlleruhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedusb 2-1: new low speed USB device using uhci_hcd and address 2ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19Clocksource tsc unstable (delta = -255312921 ns)PCI: Setting latency timer of device 0000:00:1d.7 to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5ehci_hcd 0000:00:1d.7: debug port 1PCI: cache line size of 32 is not supported by device 0000:00:1d.7ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 8 ports detectedPCI: Enabling device 0000:07:01.1 (0000 -> 0002)ACPI: PCI Interrupt 0000:07:01.1[B] -> GSI 19 (level, low) -> IRQ 20PCI: Setting latency timer of device 0000:07:01.1 to 64firewire_ohci: Added fw-ohci device 0000:07:01.1, OHCI version 1.10ata_piix 0000:00:1f.2: version 2.11ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20PCI: Setting latency timer of device 0000:00:1f.2 to 64scsi0 : ata_piixscsi1 : ata_piixata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15usb 2-1: device not accepting address 2, error -71ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)ata1.00: configured for UDMA/100firewire_core: created new fw device fw0 (0 config rom retries)ata2.00: ATAPI: TSSTcorpCD/DVDW SN-S082D, SS03, max UDMA/33ata2.00: configured for UDMA/33scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SN-S082D SS03 PQ: 0 ANSI: 5usb 2-1: new low speed USB device using uhci_hcd and address 4Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxsd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAsd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 1:0:0:0: Attached scsi CD-ROM sr0usb 2-1: configuration #1 chosen from 1 choice sda5<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 sda6<5>sr 1:0:0:0: Attached scsi generic sg1 type 5 sda7 sda8<6>usbcore: registered new interface driver hiddev sda9 >sd 0:0:0:0: [sda] Attached SCSI diskinput: Microsoft Comfort Optical Mouse 1000 as /class/input/input1input: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1d.1-1usbcore: registered new interface driver usbhiddrivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverAttempting manual resumekjournald starting. Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.Linux agpgart interface v0.102 (c) Dave Jonesagpgart: Detected an Intel 945GM Chipset.agpgart: Detected 7932K stolen memory.agpgart: AGP aperture is 256M @ 0xc0000000iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)Yenta: CardBus bridge found at 0000:07:01.0 [152d:0754]Yenta: Enabling burst memory read transactionsYenta: Using CSCINT to route CSC interrupts to PCIYenta: Routing CardBus interrupts to PCIYenta TI: socket 0000:07:01.0, mfunc 0x01110922, devctl 0x66Real Time Clock Driver v1.12acieee80211_crypt: registered algorithm 'NULL'ieee80211: 802.11 data/management/control stack, git-1.1.13ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>intel_rng: FWH not detectedsdhci: Secure Digital Host Controller Interface driversdhci: Copyright(c) Pierre OssmanYenta: ISA IRQ mask 0x0000, PCI irq 18Socket status: 30000006Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0bpcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fffcs: IO port probe 0x5000-0x5fff: clean.pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffffpcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffffipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2dmpripw3945: Copyright(c) 2003-2006 Intel CorporationACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:05:00.0 to 64sky2 0000:05:00.0: v1.14 addr 0xda000000 irq 18 Yukon-EC Ultra (0xb4) rev 2sky2 eth0: addr 00:16:36:84:2e:23PCI: Enabling device 0000:07:01.2 (0000 -> 0002)ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21PCI: Setting latency timer of device 0000:00:1b.0 to 64ACPI: PCI Interrupt 0000:07:01.2[A] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:07:01.2 to 64udev: renamed network interface eth0 to eth1ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20sdhci: SDHCI controller found at 0000:07:01.3 [104c:803c] (rev 0)PCI: Enabling device 0000:07:01.3 (0000 -> 0002)ACPI: PCI Interrupt 0000:07:01.3[A] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:07:01.3 to 64mmc0: SDHCI at 0xdc005800 irq 18 DMAACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:03:00.0 to 64ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connectioncs: IO port probe 0x100-0x3af: clean.cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7cs: IO port probe 0x820-0x8ff: clean.cs: IO port probe 0xc00-0xcf7: clean.cs: IO port probe 0xa00-0xaff: clean.Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0input: SynPS/2 Synaptics TouchPad as /class/input/input2Adding 2104472k swap on /dev/sda7. Priority:-1 extents:1 across:2104472kEXT3 FS on sda6, internal journalloop: module loadeddevice-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.comkjournald starting. Commit interval 5 secondsEXT3 FS on sda1, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting. Commit interval 5 secondsEXT3 FS on sda8, internal journalEXT3-fs: mounted filesystem with ordered data mode.ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)udev: renamed network interface eth0 to eth2sky2 eth1: enabling interfacesky2 eth1: ram buffer 0KNET: Registered protocol family 10lo: Disabled Privacy ExtensionsADDRCONF(NETDEV_UP): eth1: link is not readyACPI: Battery Slot [BAT1] (battery present)ACPI: AC Adapter [ACAD] (off-line)input: Power Button (FF) as /class/input/input3ACPI: Power Button (FF) [PWRF]input: Power Button (CM) as /class/input/input4ACPI: Power Button (CM) [PWRB]input: Sleep Button (CM) as /class/input/input5ACPI: Sleep Button (CM) [SLPB]input: Lid Switch as /class/input/input6ACPI: Lid Switch [LID][drm] Initialized drm 1.1.0 20060810ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17[drm] Initialized i915 1.6.0 20060119 on minor 0ADDRCONF(NETDEV_UP): eth2: link is not readyieee80211_crypt: registered algorithm 'WEP'ADDRCONF(NETDEV_CHANGE): eth2: link becomes readyeth2: no IPv6 routers present