# dmesg
Linux version 2.6.22-gentoo-r8-shal3r (root@rush.lv) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #7 SMP PREEMPT Fri Oct 19 19:25:47 EEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000ceee0000 (usable)
BIOS-e820: 00000000ceee0000 - 00000000ceee3000 (ACPI NVS)
BIOS-e820: 00000000ceee3000 - 00000000ceef0000 (ACPI data)
BIOS-e820: 00000000ceef0000 - 00000000cef00000 (reserved)
BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
3968MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5980
NX (Execute Disable) protection: active
Entering add_active_range(0, 0, 1245184) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1245184
early_node_map[1] active PFN ranges
0: 0 -> 1245184
On node 0 totalpages: 1245184
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 7936 pages used for memmap
HighMem zone: 1007872 pages, LIFO batch:31
DMI 2.4 present.
Using APIC driver default
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 15:3 APIC version 17
Processor #1 15:3 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Built 1 zonelists. Total pages: 1235456
Kernel command line: auto BOOT_IMAGE=Gentoonotsc root=801 panic=10 notsc
notsc: Kernel compiled with CONFIG_X86_TSC, cannot disable TSC.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2805.970 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4131316k/4980736k available (2414k kernel code, 44328k reserved, 1200k data, 228k init, 3259264k highmem)
virtual kernel memory layout:
fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc048e000 - 0xc04c7000 ( 228 kB)
.data : 0xc035b903 - 0xc0487ac4 (1200 kB)
.text : 0xc0100000 - 0xc035b903 (2414 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5617.85 BogoMIPS (lpj=9358175)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 12k freed
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5613.18 BogoMIPS (lpj=9352293)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
Total of 2 processors activated (11230.04 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Brought up 2 CPUs
migration_cost=3333
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf2060, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:10.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/02f0] at 0000:00:00.0
PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 5
PCI->APIC IRQ transform: 0000:00:0a.1[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 5
PCI->APIC IRQ transform: 0000:01:08.0[A] -> IRQ 10
PCI: Bridge: 0000:00:10.0
IO window: d000-dfff
MEM window: fdd00000-fddfffff
PREFETCH window: fde00000-fdefffff
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:00:05.0
Real Time Clock Driver v1.12ac
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
sk98lin: driver has been replaced by the skge driver and is scheduled for removal
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
r8169 Gigabit Ethernet driver 2.2LK loaded
eth0: RTL8169s/8110s at 0xf8800000, 00:17:9a:38:53:40, IRQ 10
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 161
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hdb: TSSTcorp CD-ROM SH-C522C, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hdb: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
sata_nv 0000:00:0e.0: version 3.4
PCI: Setting latency timer of device 0000:00:0e.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 5
ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 5
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 228k freed
r8169: eth0: link up
UDP: short packet: From 58.213.116.130:28798 15000/33 to 195.244.128.237:12053
UDP: short packet: From 78.84.187.211:27005 0/45 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/40 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/45 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 20013/55 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/41 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/36 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 48948/35 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/42 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/39 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/36 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/37 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/46 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/43 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 6159/45 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/38 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/36 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 54981/47 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 15651/45 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/41 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/36 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 11766/47 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/40 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/45 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/40 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 106/44 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/46 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/42 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/42 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/47 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/39 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/49 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/44 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/41 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/41 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/49 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/44 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/51 to 195.244.128.237:27015
UDP: short packet: From 78.84.187.211:27005 0/44 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 0/46 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 0/40 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 0/41 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 0/39 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 53233/54 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 0/44 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 35992/48 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 0/47 to 195.244.128.237:27015
UDP: short packet: From 84.237.169.150:27005 0/36 to 195.244.128.237:27015
UDP: short packet: From 84.237.205.227:27005 50252/36 to 195.244.128.237:27015
UDP: short packet: From 84.237.205.227:27005 0/38 to 195.244.128.237:27015
UDP: short packet: From 84.237.205.227:27005 0/41 to 195.244.128.237:27015
UDP: short packet: From 84.237.205.227:27005 0/38 to 195.244.128.237:27015
UDP: short packet: From 84.237.205.227:27005 0/37 to 195.244.128.237:27015
UDP: short packet: From 84.237.205.227:27005 0/38 to 195.244.128.237:27015
UDP: short packet: From 84.237.205.227:27005 0/44 to 195.244.128.237:27015
UDP: short packet: From 84.237.205.227:27005 0/44 to 195.244.128.237:27015