Received a UCD for Upstream Channel 5!
Selecting UCD for Us Channel 1
BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not f
ound for kReqDataIUC.
Upstream Frequency = 33000000
Found QAM16 = false
0x0000c422 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chDsTimeSync: (CmDocsisCtlThread) entering...
new_us_scdma_enabled = false
fLastDsClockModeIsScdma = false
fCmDsTargetingState = kDsOkUsPending
IsDccContext() = false
0x0000c422 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chDsTimeSync: (CmDocsisCtlThread) ds time sync should be ok. resume us init no
w.
0x0000c422 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkRes
umeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial
ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Logging event: T501.0 Acquired Downstream (729000000 Hz)........ SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
TCNISO Embedded Telnet Server
login:
password:
Welcome to the Broadcom CLI (command-line interpreter).
To access the native VxWorks shell, type 'shell'.
CM>
CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-out0x0000bff4 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::
T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from C
MTS.
0x0000bff4 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::CommonRngEr
rorHandler: (CmDocsisCtlThread)
0x0000bff4 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TargetNextU
sChan: (CmDocsisCtlThread)
0x0000bff4 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ResetRngSta
te: (CmDocsisCtlThread)
Logging event: No Ranging Response received - T3 time-out
Logging event: Init RANGING Critical Ranging Request Retries exhausted
Received a UCD for Upstream Channel 5!
Received a UCD for Upstream Channel 6!
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-out
Received a UCD for Upstream Channel 7!
Received a UCD for Upstream Channel 8!
Received a UCD for Upstream Channel 1!
Received a UCD for Upstream Channel 2!
Received a UCD for Upstream Channel 3!
Received a UCD for Upstream Channel 4!
Received a UCD for Upstream Channel 5!
Selecting UCD for Us Channel 1
BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not f
ound for kReqDataIUC.
Upstream Frequency = 33000000
Found QAM16 = false
0x0000c422 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chDsTimeSync: (CmDocsisCtlThread) entering...
new_us_scdma_enabled = false
fLastDsClockModeIsScdma = false
fCmDsTargetingState = kDsOkUsPending
IsDccContext() = false
0x0000c422 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chDsTimeSync: (CmDocsisCtlThread) ds time sync should be ok. resume us init no
w.
0x0000c422 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkRes
umeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial
ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Logging event: T501.0 Acquired Downstream (729000000 Hz)........ SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-out0x00011e72 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::
T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from C
MTS.
0x00011e72 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::CommonRngEr
rorHandler: (CmDocsisCtlThread)
0x00011e72 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TargetNextU
sChan: (CmDocsisCtlThread)
0x00011e72 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ResetRngSta
te: (CmDocsisCtlThread)
Logging event: No Ranging Response received - T3 time-out
Logging event: Init RANGING Critical Ranging Request Retries exhausted
Received a UCD for Upstream Channel 7!
Received a UCD for Upstream Channel 8!
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-out
Received a UCD for Upstream Channel 1!
Received a UCD for Upstream Channel 2!
Received a UCD for Upstream Channel 3!
Received a UCD for Upstream Channel 4!
Received a UCD for Upstream Channel 5!
Received a UCD for Upstream Channel 6!
Received a UCD for Upstream Channel 7!
Selecting UCD for Us Channel 2
BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not f
ound for kReqDataIUC.
Upstream Frequency = 33000000
Found QAM16 = false
0x000122be ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chDsTimeSync: (CmDocsisCtlThread) entering...
new_us_scdma_enabled = false
fLastDsClockModeIsScdma = false
fCmDsTargetingState = kDsOkUsPending
IsDccContext() = false
0x000122be ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chDsTimeSync: (CmDocsisCtlThread) ds time sync should be ok. resume us init no
w.
0x000122be ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkRes
umeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial
ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Logging event: T501.0 Acquired Downstream (729000000 Hz)........ SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-out0x000184ca ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::
T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from C
MTS.
0x000184ca ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::CommonRngEr
rorHandler: (CmDocsisCtlThread)
0x000184ca ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TargetNextU
sChan: (CmDocsisCtlThread)
0x000184ca ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ResetRngSta
te: (CmDocsisCtlThread)
Logging event: No Ranging Response received - T3 time-out
Logging event: Init RANGING Critical Ranging Request Retries exhausted
Received a UCD for Upstream Channel 8!
Received a UCD for Upstream Channel 1!
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-out
Received a UCD for Upstream Channel 2!
Received a UCD for Upstream Channel 3!
Received a UCD for Upstream Channel 4!
Received a UCD for Upstream Channel 5!
Received a UCD for Upstream Channel 6!
Received a UCD for Upstream Channel 7!
Received a UCD for Upstream Channel 8!
Selecting UCD for Us Channel 3
BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not f
ound for kReqDataIUC.
Upstream Frequency = 33000000
Found QAM16 = false
0x000188c6 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chDsTimeSync: (CmDocsisCtlThread) entering...
new_us_scdma_enabled = false
fLastDsClockModeIsScdma = false
fCmDsTargetingState = kDsOkUsPending
IsDccContext() = false
0x000188c6 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chDsTimeSync: (CmDocsisCtlThread) ds time sync should be ok. resume us init no
w.
0x000188c6 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkRes
umeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial
ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Logging event: T501.0 Acquired Downstream (729000000 Hz)........ SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-outAdjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
CM> 1970-01-01 00:00:28 3-Critical 0x04E33948 No Ranging Response received -
T3 time-out