rendered paste body#!/bin/bash
# Copyright Jean-Philippe Guillemin <jp.guillemin@free.fr>. This program is free software;
# you can redistribute it and/or modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2 of the License,
# or (at your option) any later version. Please take a look at http://www.gnu.org/copyleft/gpl.htm
# This script :
# - probes for videocard, monitor and keyboard
# - ask for runlevel
# - writes a configured Xorg config file.
# Version 1.0 - 30/08/2005
# * Added Xdialog support
# Version 1.1 - 27/09/2005
# * Fixed bug in call to discover causing glibc error message
# Version 1.2 - 16/10/2005
# * Fixed bug when 2 video cards are detected by discover
# Version 1.3 - 22/10/2005
# * Improved/secured tempdir management
# Version 2.0 - 29/12/2005
# * Monitor probing with edid/X-configure
# Version 2.1 - 17/06/2006
# * Removed discover support
# Version 2.2 - 17/06/2006
# * Improved modules detection
# Version 3.2 - 29/09/2006
# * Ported to Xorg 7.x
# Version 3.3 - 08/04/2007
# * Compositor aware
# Version 3.4 - 18/04/2007
# * Silent mode
# Take a look at "Xdialog" and use it instead of "dialog" in case X is running
if [[ "$DISPLAY" && "$(which Xdialog 2>&1 | grep -v "which: no")" ]]; then
dialog="Xdialog --wrap --left"
else
dialog="dialog"
fi
# Set the locale in en_US, to avoid problems with Xlib
LANG=en_US
# Path needs to be extended in case you're only half a root :)
export PATH="${PATH}:/usr/sbin:/sbin"
# create the buffer directory
export buffer="/tmp/videoconfig"
mkdir -p $buffer
# Create the xorg.conf file
writexorg() {
cp -f /etc/X11/xorg.conf /etc/X11/xorg.old 2>/dev/null
# Header
cat << EOF > /etc/X11/xorg.conf
# **********************************************************************
# This file was generated by videoconfig (Zenwalk Xorg configuration tool)
# If you changed your video card or monitor, please run videoconfig again
# from runlevel 3. Don't modify this file yourself until you know what you do ;)
# **********************************************************************
EOF
# Files section
cat << EOF >> /etc/X11/xorg.conf
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
EOF
cat $buffer/xorg.files >> /etc/X11/xorg.conf
# Modules section
cat << EOF >> /etc/X11/xorg.conf
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
EOF
cat $buffer/xorg.modules >> /etc/X11/xorg.conf
# Remaining sections
cat << EOF >> /etc/X11/xorg.conf
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontVTSwitch"
# Option "DontZap"
# Option "DontZoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
# Option "blank time" "10" # 10 minutes
# Option "standby time" "20"
# Option "suspend time" "30"
# Option "off time" "60"
# Option "EstimateSizesAggresively" "0"
EndSection
# **********************************************************************
# DRI section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
EndSection
# **********************************************************************
# Extensions section.
# **********************************************************************
Section "Extensions"
Option "Composite" "Disable"
EndSection
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# Option "Protocol" "Xqueue"
# Option "AutoRepeat" "500 5"
# Option "Xleds" "1 2 3"
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "$xkblayout"
# Option "XkbVariant" "us"
Option "XkbOptions" "$xkboptions"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
# Option "Protocol" "Xqueue"
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# Option "ChordMiddle"
Option "ZAxisMapping" "4 5"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
Identifier "Monitor1"
$monitorvendorname
$monitormodelname
$horizsync
$vertrefresh
$useedidfreqs
$dpms
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Videocard1"
$cardvendorname
BoardName "$videocard"
Driver "$driver"
$busid
Option "RenderAccel" "true"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Videoconfig"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Videoconfig"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
EOF
}
# Probe monitor model, frequencies and videocard driver #################################
function xprob(){
useedidfreqs=''
currenthome=$HOME
HOME=$buffer
/usr/bin/X -configure 2>/dev/null
HOME=$currenthome
monitorvendorname="$( sed -n '/^ *Section *\"Monitor\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new \
| grep "VendorName" \
| grep -v "Monitor Vendor" )"
if [ ! "$monitorvendorname" ] ; then
monitorvendorname="$(/usr/sbin/get-edid 2>/dev/null | /usr/sbin/parse-edid 2>/dev/null | grep "VendorName")"
[ ! "$monitorvendorname" ] && monitorvendorname=' VendorName "Monitor Vendor"'
fi
monitormodelname="$( sed -n '/^ *Section *\"Monitor\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new \
| grep "ModelName" \
| grep -v "Monitor Model" )"
if [ ! "$monitormodelname" ] ; then
monitormodelname="$(/usr/sbin/get-edid 2>/dev/null | /usr/sbin/parse-edid 2>/dev/null | grep "ModelName")"
[ ! "$monitormodelname" ] && monitormodelname=' ModelName "The monitor"'
fi
horizsync="$( sed -n '/^ *Section *\"Monitor\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new | grep "HorizSync")"
if [ ! "$horizsync" ] ; then
horizsync="$(/usr/sbin/get-edid 2>/dev/null | /usr/sbin/parse-edid 2>/dev/null | grep "HorizSync")"
if [ ! "$horizsync" ] ; then
horizsync=' HorizSync 31.5 - 50.0'
useedidfreqs=' Option "UseEdidFreqs" "1"'
fi
fi
vertrefresh="$( sed -n '/^ *Section *\"Monitor\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new | grep "VertRefresh")"
if [ ! "$vertrefresh" ] ; then
vertrefresh="$(/usr/sbin/get-edid 2>/dev/null | /usr/sbin/parse-edid 2>/dev/null | grep "VertRefresh")"
if [ ! "$vertrefresh" ] ; then
vertrefresh=' VertRefresh 40-90'
useedidfreqs=' Option "UseEdidFreqs" "1"'
fi
fi
dpms="$( sed -n '/^ *Section *\"Monitor\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new | grep "DPMS")"
cardvendorname="$( sed -n '/^ *Section *\"Device\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new | grep "VendorName" )"
driver="$( sed -n '/^ *Section *\"Device\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new \
| grep -v "##" \
| grep "Driver" \
| sed -e 's/^[ \t]*Driver[ \t]*\"\(.*\)\".*$/\1/')"
[ ! "$driver" ] && driver='vesa'
videocard="$( sed -n '/^ *Section *\"Device\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new \
| grep "BoardName" \
| grep -v "Unknown" \
| sed -e 's/^[ \t]*BoardName[ \t]*\"\(.*\)\".*$/\1/' )"
[ ! "$videocard" ] && videocard="Video device"
busid="$( sed -n '/^ *Section *\"Device\" *$/,/^ *EndSection *$/p' $buffer/xorg.conf.new | grep "BusID" )"
# The module section of xorg.conf
sed -n '/Section \"Module\"/,/EndSection/p' $buffer/xorg.conf.new > $buffer/xorg.modules
# The files section of xorg.conf
sed -n '/Section \"Files\"/,/EndSection/p' $buffer/xorg.conf.new > $buffer/xorg.files
}
##################################################################
# Converts keyboard map from kmap (/usr/share/kbd/keymaps) to xkb (/etc/X11/xkb)
function xkbconvert(){
# Probing the keymap
key="$(cat /etc/rc.d/rc.keymap \
| grep "^[[:space:]]*\/usr\/bin\/loadkeys" \
| sed -e 's/^.*loadkeys *\([^\.]*\)\(\.map\)*$/\1/')"
# We convert keymap into XkbLayout -- The fields are keymap | XkbLayout | XkbOptions
cat << "EOF" | grep "^$key|.*|.*" \
| sed -e "s/^.*|\(.*\)|\(.*\)/\1|\2/" > $buffer/xkb
ANSI-dvorak|dvorak|
al|al|
am|am|
ar|ar|
azerty|fr|
az|az|
be-latin1|be|
bg-cp1251|bg|
bg-cp855|bg|
bg_bds-cp1251|bg|
bg_bds-utf8|bg|
bg_pho-cp1251|bg|
bg_pho-utf8|bg|
br-abnt2|br|
br-abnt|br|
br-latin1-abnt2|br|
br-latin1-us|br|
brdk|brdk|
by|by|
by|by|
cf|ca_enhanced|
croat|hr|
cz-cp1250|cz|
cz-lat2-prog|cz|
cz-lat2|cz|
cz-us-qwertz|cz_qwerty|
cz|cz|
de-latin1-nodeadkeys|de|
de-latin1|de|
de_CH-latin1|de_CH|
de|de|
dk-latin1|dk|
dk|dk|
dvorak-l|dvorak|
dvorak-r|dvorak|
dvorak|dvorak|
es-cp850|es|
es|es|
fi-latin1|fi|
fi-latin9|fi|
fi|fi|
fr-latin1|fr|
fr-latin9|fr|
fr-pc|fr|
fr_CH-latin1|fr_CH|
fr_CH|fr_CH|
fr|fr|
gr-pc|us,el|grp:alt_shift_toggle
gr|us,el|grp:alt_shift_toggle
hu|hu|
il-heb|il|
il-phonetic|il|
il|il|
is-latin1-us|is|
is-latin1|is|
it-ibm|it|
it2|it|
it|it|
jp106|jp|
lt.baltic|lt_std|
lt.l4|lt_std|
lt|lt_std|
lt|lt|
mk-cp1251|mk|
mk-utf|mk|
mk0|mk|
mk|mk|
nl2|nl|
nl|nl|
nl|nl|
no-latin1|no|
no|no|
pl2|pl2|
pl|pl|
pt-latin1|pt|
pt-latin9|pt|
ro_win|ro_microsoft|
ru-cp1251|ru|
ru-ms|ru|
ru-yawerty|ru|
ru1|ru|
ru2|ru|
ru3|ru|
ru4|ru|
ru_win|ru|
ru|ru|
se-fi-ir209|se_FI|
se-fi-lat6|se_FI|
se-ir209|se_SE|
se-lat6|se_SE|
sg-latin1-lk450|sg|
sg-latin1|de_CH|
sg|de_CH|
sk-prog-qwerty|sk_qwerty|
sk-prog-qwertz|sk_qwerty|
sk-prog-qwertz|sk|
sk-qwerty|sk_qwerty|
sk-qwertz|sk_qwerty|
slovene|si|
sr-cy|sry|
sv-latin1|sv|
syr|syr|
tel|tel|
th_pat|th_pat|
th_tis|th_tis|
th|th|
tj|tj|
tml|tml|
tr_f-latin5|tr_f|
tr_q-latin5|tr|
tralt|tr|
tralt|tr|
trq|tr|
ua-utf-ws|ua|
ua-utf|ua|
ua-ws|ua|
ua|ua|
ua|ua|
uk|gb|
us-acentos|us|
us|us|
uz|uz|
vn|vn|
wangbe2|fr|
wangbe|fr|
EOF
xkblayout="$(sed -e "s/^\(.*\)|.*/\1/" $buffer/xkb)"
xkboptions="$(sed -e "s/^.*|\(.*\)/\1/" $buffer/xkb)"
rm -f $buffer/xkb
# Fall back to keymap if no xkb maping available
if [ ! "$xkblayout" ]; then
xkblayout="$key"
xkboptions=""
fi
}
##################################################################
function updatefc(){
# Update the X font indexes
if [ -x /usr/bin/fc-cache ]; then
for dir in /usr/share/fonts/* ; do touch $dir ; done
/usr/bin/fc-cache 2>&1 1>/dev/null &
fi
}
##################################################################
function updatemime(){
# Update the X font indexes
if [ -x /usr/bin/update-mime-database ]; then
/usr/bin/update-mime-database /usr/share/mime 2>&1 1>/dev/null &
fi
}
##################################################################
function updatescrollkeeper(){
# Generate GNOME documentation
if [ -x /usr/bin/scrollkeeper-update ]; then
/usr/bin/scrollkeeper-update 2>&1 1>/dev/null &
fi
}
########################################
########### HERE COMES THE SUN ####################
########################################
if [ "$DISPLAY" ]; then
$dialog --msgbox "To probe for the video driver and monitor please run \"$(basename $0)\" from runlevel 3" 8 70
else
if [ "$1" = "silent" ] ; then
echo "Configuring the X server"
(
xprob
xkbconvert
writexorg
updatefc
updatemime
sed -i "s/^id:.*:initdefault:$/id:4:initdefault:/" /etc/inittab
sed -i 's/^\([ \t]*Option.*Composite.*\)\".*\".*$/\1\"Enable\"/' /etc/X11/xorg.conf
) 2>&1 1>/dev/null
exit
fi
# probe for videocard/monitor specs if we are called from runlevel 3
clear
xprob
clear
$dialog \
--title "X11 configuration" \
--icon "videoconfig" \
--menu \
" Videocard : $videocard \n\
Driver : \"$driver\" \n\
Do you want to use this configuration (recommended) ?\n\n" \
14 75 3 \
"Yes" "Configure X11" \
"No" "keep existing configuration" 2> $buffer/configxorg
configxorg=$(cat $buffer/configxorg)
rm -f $buffer/configxorg
case $configxorg in
Yes)
$dialog --infobox "Configuring the X server..." 8 45
sleep 1
xkbconvert
writexorg
;;
No)
;;
esac
fi
# Compositor support ?
$dialog \
--title "Compositor" \
--icon "videoconfig" \
--menu \
"Do you want to enable the compositor (transparency, shadows, ... it can be slow on some videocards) ?\n\n" \
14 75 3 \
"Yes" "Enable the compositor" \
"No" "Disable the compositor" 2> $buffer/compositor
compositor=$(cat $buffer/compositor)
rm -f $buffer/compositor
case $compositor in
Yes)
$dialog --infobox "Enabling compositor extension..." 8 45
sleep 1
sed -i 's/^\([ \t]*Option.*Composite.*\)\".*\".*$/\1\"Enable\"/' /etc/X11/xorg.conf
;;
No)
$dialog --infobox "Disabling compositor extension..." 8 45
sleep 1
sed -i 's/^\([ \t]*Option.*Composite.*\)\".*\".*$/\1\"Disable\"/' /etc/X11/xorg.conf
;;
esac
updatefc
updatemime
# Runlevel 3 or 4 ?
$dialog --title "Login mode configuration" --icon "videoconfig" --menu \
"Select the login mode you want to enable on startup:\n\n" \
16 76 3 \
"Text" "Text mode login - runlevel 3" \
"Graphical" "Graphical Xwindow login - runlevel 4" \
"Skip" "No change" 2> $buffer/runlevel
runlevel=$(cat $buffer/runlevel)
rm -f $buffer/runlevel
case $runlevel in
Text)
$dialog --infobox "Setting $runlevel login..." 8 45
sleep 1
sed -i "s/^id:.*:initdefault:$/id:3:initdefault:/" /etc/inittab
;;
Graphical)
$dialog --infobox "Setting $runlevel login..." 8 45
sleep 1
sed -i "s/^id:.*:initdefault:$/id:4:initdefault:/" /etc/inittab
;;
Skip)
$dialog --infobox "Keeping current configuration." 8 45
sleep 1
;;
esac