nected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
eth1: Link is up at 100 Mbps, full-duplex.
eth1: Pause is disabled
usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 1
usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 1
eth1: suspending, WakeOnLan disabled
bcm43xx: Suspending...
bcm43xx: Device suspended.
radeonfb (0000:00:10.0): suspending to state: 2...
uninorth-agp: disabling AGP on device 0000:00:10.0
uninorth-agp: disabling AGP on bridge 0000:00:0b.0
radeonfb (0000:00:10.0): resuming from state: 2...
PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
bcm43xx: Resuming...
PCI: Enabling device 0001:10:12.0 (0000 -> 0002)
PM: Writing back config space on device 0001:10:12.0 at offset f (was 100, writing 134)
PM: Writing back config space on device 0001:10:12.0 at offset 4 (was 0, writing 80084000)
PM: Writing back config space on device 0001:10:12.0 at offset 3 (was 0, writing 1000)
PM: Writing back config space on device 0001:10:12.0 at offset 1 (was 100002, writing 100006)
bcm43xx: Device resumed.
PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
PCI: Enabling device 0001:10:1b.2 (0000 -> 0002)
PM: Writing back config space on device 0001:10:1b.2 at offset 1 (was 2100006, writing 2100016)
eth1: resuming
PHY ID: 4061e4, addr: 0
hda: Enabling Ultra DMA 5
hdc: Enabling MultiWord DMA 2
ohci_hcd 0001:10:1b.1: wakeup
adb: starting probe task...
eth1: Link is up at 100 Mbps, full-duplex.
eth1: Pause is disabled
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Loading R200 Microcode
adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
ADB mouse at 3, handler set to 4 (trackpad)
adb: finished probe task...
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
usb 3-1: USB disconnect, address 2
ohci_hcd 0001:10:1b.1: wakeup
eth1: no IPv6 routers present
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
eth1: Link is up at 100 Mbps, full-duplex.
eth1: Pause is disabled
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
eth1: no IPv6 routers present
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
ieee1394: Error parsing configrom for node 0-00:1023
ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[0050770e10004990]
sd 0:0:0:0: rejecting I/O to device being removed
xfs_force_shutdown(sda5,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0
Filesystem "sda5": I/O Error Detected. Shutting down filesystem: sda5
Please umount the filesystem, and rectify the problem(s)
xfs_force_shutdown(sda5,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0
sd 0:0:0:0: rejecting I/O to device being removed
xfs_force_shutdown(sda3,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0
Filesystem "sda3": I/O Error Detected. Shutting down filesystem: sda3
Please umount the filesystem, and rectify the problem(s)
xfs_force_shutdown(sda3,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0
xfs_force_shutdown(sda5,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0
xfs_force_shutdown(sda5,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0
scsi 0:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sda1, logical block 0
lost page write due to I/O error on sda1
xfs_force_shutdown(sda3,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0
xfs_force_shutdown(sda3,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0
ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[0050770e10004990]
scsi2 : SBP-2 IEEE-1394
ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
sbp2: probe of 0050770e10004990-0 failed with error -16
usb 4-1: new high speed USB device using ehci_hcd and address 5
usb 4-1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: WDC WD60 Model: 0UE-00HCT0 Rev: 09.0
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
sda: Mode Sense: 00 14 00 00
sda: assuming drive cache: write through
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
sda: Mode Sense: 00 14 00 00
sda: assuming drive cache: write through
sda: [mac] sda1 sda2 sda3 sda4
sd 3:0:0:0: Attached scsi disk sda
usb-storage: device scan complete
hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only.
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
ieee1394: Node changed: 0-01:1023 -> 0-00:1023
ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[0050770e10004990]
ieee1394: Error parsing configrom for node 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[0050770e10004990]
scsi4 : SBP-2 IEEE-1394
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
Vendor: SAMSUNG Model: SP1604N Rev:
Type: Direct-Access-RBC ANSI SCSI revision: 04
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 13 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 13 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 4:0:0:0: Attached scsi disk sdb
hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only.
XFS mounting filesystem sdb5
Ending clean XFS mount for filesystem: sdb5
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
XFS mounting filesystem sdb3
Ending clean XFS mount for filesystem: sdb3
hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only.
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
ohci_hcd 0001:10:1b.1: wakeup
usb 3-1: new low speed USB device using ohci_hcd and address 7
usb 3-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input7
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:10:1b.1-1
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)