[15:00] #JarJar# help chaninfo
### chaninfo <channel>
This lists all the settings for the bot on the given channel.
It shows any of the following:
chanmode These modes are enforced on the channel. Both + and -
modes can be enforced.
idle-kick Kick idle users that are not +f or above on the channel
after how many minutes (set this to 0 to disable).
ATTENTION: Due to security concerns, only permanent owners can set
the need-* modes.
need-op This Tcl command will be executed when the bot doesn't
have ops.
need-invite This Tcl command will be executed when the bot needs
an invite to the channel (i.e. the channel is +i).
need-key This Tcl command will be executed when the bot needs
the key to the channel to join.
need-unban This Tcl command will be executed when the bot needs
to be unbanned from the channel to join.
need-limit This Tcl command will be executed when the bot needs
the channel limit to be raised to join.
stopnethack-mode This setting will make the bot de-op anyone who
enters the channel with serverops. There are seven
different modes for this settings:
0 turn off
1 isoptest (allow serverop if registered op)
2 wasoptest (allow serverop if user had op before
split)
3 allow serverop if isop or wasop
4 allow serverop if isop and wasop
5 If the channel is -bitch, see stopnethack-mode 3
If the channel is +bitch, see stopnethack-mode 1
6 If the channel is -bitch, see stopnethack-mode 2
If the channel is +bitch, see stopnethack-mode 4
revenge-mode This settings defines how the bot should punish
bad users when revenging. There are four possible
settings:
0 Deop the user.
1 Deop the user and give them the +d flag for the
channel.
2 Deop the user, give them the +d flag for the
channel, and kick them.
3 Deop the user, give them the +d flag for the
channel, kick, and ban them.
ban-time Set here how long temporary bans will last (in
minutes). If you set this setting to 0, the bot will
never remove them.
exempt-time Set here how long temporary exempts will last (in
minutes). If you set this setting to 0, the bot will
never remove them. The bot will check the exempts
every X minutes, but will not remove the exempt if a
ban is set on the channel that matches that exempt.
Once the ban is removed, then the exempt will be
removed the next time the bot checks. Please note
that this is an IRCnet feature.
invite-time Set here how long temporary invites will last (in
minutes). If you set this setting to 0, the bot will
never remove them. The bot will check the invites
every X minutes, but will not remove the invite if a
channel is set to +i. Once the channel is -i then the
invite will be removed the next time the bot checks.
Please note that this is an IRCnet feature.
aop-delay This is used for autoop, autohalfop, autovoice.
If an op or voice joins a channel while another op or
voice is pending, the bot will attempt to put both
modes on one line.
aop-delay 0 No delay is used.
aop-delay X An X second delay is used.
aop-delay X:Y Random delay between X and Y is used.
The following can be set + or - (e.g. .chanset #channel -enforcebans)
enforcebans When a ban is set, kick people who are on the channel
and match the ban?
dynamicbans Only activate bans on the channel when necessary?
This keeps the channel's ban list from getting
excessively long. The bot still remembers every ban,
but it only activates a ban on the channel when it sees
someone join who matches that ban.
userbans Allow bans to be made by users directly? If turned
off, the bot will require all bans to be made through
the bot's console.
dynamicexempts Only activate exempts on the channel when
necessary? This keeps the channel's exempt list from
getting excessively long. The bot still remembers every
exempt, but it only activates a exempt on the channel
when it sees a ban set that matches the exempt. The
exempt remains active on the channel for as long as the
ban is still active.
userexempts Allow exempts to be made by users directly? If
turned off, the bot will require all exempts to be made
through the bot's console.
dynamicinvites Only activate invites on the channel when necessary?
This keeps the channel's invite list from getting
excessively long. The bot still remembers every invite,
but the invites are only activated when the channel is
set to invite only and a user joins after requesting an
invite. Once set, the invite remains until the channel
goes to -i.
userinvites Allow invites to be made by users directly? If turned
off, the bot will require all invites to be made through
the bot's console.
autoop Op users with the +o flag as soon as they join the
channel? This is insecure and not recommended.
autohalfop Halfop users with the +l flag as soon as they join
the channel? This is insecure and not recommended.
bitch Only let users with the +o flag have op on the
channel?
greet Say a user's info line when they join the channel?
protectops Re-op a user with the +o flag if they get deopped?
protecthalfops Re-halfop a user with the +l flag if they get
dehalfopped?
protectfriends Re-op a user with the +f flag if they get deopped?
statuslog Log the channel status line every 5 minutes? This
shows the bot's status on the channel (op, voice, etc.),
the channel's modes, and the number of +m, +o, +v, +n,
+b, +e, and +I users on the channel. A sample status
line follows:
[01:40] @#chan (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
revenge Remember people who deop/kick/ban the bot, valid ops,
or friends and punish them? Users with the +f flag are
exempt from revenge.
revengebot This is similar to to the 'revenge' option, but it
only triggers if a bot gets deopped, kicked or banned.
autovoice Voice users with the +v flag when they join the
channel?
secret Prevent this channel from being listed on the botnet?
shared Share channel-related user info for this channel?
cycle Cycle the channel when it has no ops?
dontkickops Do you want the bot not to be able to kick users who
have the +o flag, letting them kick-flood for instance
to protect the channel against clone attacks?
inactive This prevents the bot from joining the channel (or
makes it leave the channel if it is already there). It
can be useful to make the bot leave a channel without
losing its settings, channel-specific user flags,
channel bans, and without affecting sharing.
seen Respond to seen requests in the channel? The seen
module must be loaded for this to work.
nodesynch Allow non-ops to perform channel modes? This can stop
the bot from fighting with services such as ChanServ, or
from kicking IRCops when setting channel modes without
having ops.
The following are flood settings, they are set via ".chanset <channel>
flood-type number:seconds", where number and second are integers
indicating the number of times in how many seconds the flood will be
triggered. Setting one of these to 0:0, 0:1, or 1:0 will deactivate the
respective flood setting.
flood-chan Set here how many channel messages in how many seconds
from one host constitutes a flood. Setting this to 0 or 0:0
disables text flood protection for the channel.
flood-ctcp Set here how many channel ctcps in how many seconds from
one host constitutes a flood. Setting this to 0 or 0:0
disables ctcp flood protection for the channel.
flood-join Set here how many joins in how many seconds from one
host constitutes a flood. Setting this to 0 or 0:0 disables
join flood protection for the channel.
flood-kick Set here how many kicks in how many seconds from one
host constitutes a flood. Setting this to 0 or 0:0 disables
kick flood protection for the channel.
flood-deop Set here how many deops in how many seconds from one
host constitutes a flood. Setting this to 0 or 0:0 disables
deop flood protection for the channel.
flood-nick Set here how many nick changes in how many seconds from
one host constitutes a flood. Setting this to 0 or 0:0
disables nick flood protection for the channel.
See also: +chan, -chan, chansave, chanset