rendered paste bodyroot@bena-linux:~# dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffd0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262080
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262080
[ 0.000000] On node 0 totalpages: 262080
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32449 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F9ED0 checksum 0
[ 0.000000] ACPI: RSDP 000F9ED0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFC0000, 0030 (r1 A M I OEMRSDT 8000523 MSFT 97)
[ 0.000000] ACPI: FACP 3FFC0200, 0081 (r2 A M I OEMFACP 8000523 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFC0400, 441D (r1 A0128 A0128003 3 INTL 2002026)
[ 0.000000] ACPI: FACS 3FFD0000, 0040
[ 0.000000] ACPI: APIC 3FFC0390, 0068 (r1 A M I OEMAPIC 8000523 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFD0040, 0041 (r1 A M I OEMBIOS 8000523 MSFT 97)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Built 1 zonelists. Total pages: 260033
[ 0.000000] Kernel command line: root=/dev/sda6 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1607.824 MHz processor.
[ 18.484846] spurious 8259A interrupt: IRQ7.
[ 18.486557] Console: colour VGA+ 80x25
[ 18.487345] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 18.488830] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.520103] Memory: 1025536k/1048320k available (2015k kernel code, 22092k reserved, 916k data, 364k init, 130816k highmem)
[ 18.520116] virtual kernel memory layout:
[ 18.520117] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 18.520119] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.520121] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 18.520122] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 18.520124] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 18.520125] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 18.520126] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 18.520130] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.520189] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 18.600108] Calibrating delay using timer specific routine.. 3217.78 BogoMIPS (lpj=6435575)
[ 18.600156] Security Framework v1.0.0 initialized
[ 18.600168] SELinux: Disabled at boot.
[ 18.600187] Mount-cache hash table entries: 512
[ 18.600403] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 18.600414] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.600417] CPU: L2 Cache: 256K (64 bytes/line)
[ 18.600421] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 18.600438] Compat vDSO mapped to ffffe000.
[ 18.600457] Checking 'hlt' instruction... OK.
[ 18.616345] SMP alternatives: switching to UP code
[ 18.616746] Freeing SMP alternatives: 11k freed
[ 18.617220] Early unpacking initramfs... done
[ 19.052266] ACPI: Core revision 20070126
[ 19.052352] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.054418] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[ 19.054437] Total of 1 processors activated (3217.78 BogoMIPS).
[ 19.054583] ENABLING IO-APIC IRQs
[ 19.054790] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 19.199375] Brought up 1 CPUs
[ 19.199537] Booting paravirtualized kernel on bare hardware
[ 19.199600] Time: 14:20:49 Date: 11/06/107
[ 19.199638] NET: Registered protocol family 16
[ 19.199756] EISA bus registered
[ 19.199768] ACPI: bus type pci registered
[ 19.200866] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 19.200868] PCI: Using configuration type 1
[ 19.200871] Setting up standard PCI resources
[ 19.210661] ACPI: EC: Look up EC in DSDT
[ 19.214735] ACPI: Interpreter enabled
[ 19.214739] ACPI: (supports S0 S1 S3 S4 S5)
[ 19.214756] ACPI: Using IOAPIC for interrupt routing
[ 19.224440] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.224455] PCI: Probing PCI hardware (bus 00)
[ 19.225019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.225184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 19.231038] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 19.231233] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 19.231476] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 19.231666] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 19.231855] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[ 19.232085] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *3
[ 19.232317] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[ 19.232503] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
[ 19.232688] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
[ 19.232873] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *10
[ 19.233059] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[ 19.233244] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[ 19.233430] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
[ 19.233626] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[ 19.233853] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[ 19.233999] ACPI: Power Resource [ISAV] (on)
[ 19.234015] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.234031] pnp: PnP ACPI init
[ 19.234045] ACPI: bus type pnp registered
[ 19.239265] pnp: PnP ACPI: found 16 devices
[ 19.239269] ACPI: ACPI bus type pnp unregistered
[ 19.239322] PnPBIOS: Disabled by ACPI PNP
[ 19.239399] PCI: Using ACPI for IRQ routing
[ 19.239404] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.242695] NET: Registered protocol family 8
[ 19.242697] NET: Registered protocol family 20
[ 19.242800] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 19.242804] pnp: 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 19.242808] pnp: 00:09: iomem range 0xff780000-0xff7bffff has been reserved
[ 19.242816] pnp: 00:0c: ioport range 0x480-0x487 has been reserved
[ 19.242819] pnp: 00:0c: ioport range 0xd00-0xd07 has been reserved
[ 19.242826] pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 19.242830] pnp: 00:0f: iomem range 0xc0000-0xdffff could not be reserved
[ 19.242833] pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 19.242837] pnp: 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
[ 19.243273] Time: tsc clocksource has been installed.
[ 19.273102] PCI: Bridge: 0000:00:0b.0
[ 19.273104] IO window: disabled.
[ 19.273110] MEM window: fa900000-fe9fffff
[ 19.273114] PREFETCH window: ca800000-ea7fffff
[ 19.273118] PCI: Bridge: 0000:00:0e.0
[ 19.273121] IO window: b000-bfff
[ 19.273124] MEM window: fea00000-feafffff
[ 19.273127] PREFETCH window: disabled.
[ 19.273140] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 19.273160] NET: Registered protocol family 2
[ 19.311256] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.311492] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 19.314547] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.315571] TCP: Hash tables configured (established 131072 bind 65536)
[ 19.315577] TCP reno registered
[ 19.327366] checking if image is initramfs... it is
[ 19.774582] Switched to high resolution mode on CPU 0
[ 20.181467] Freeing initrd memory: 9225k freed
[ 20.182017] audit: initializing netlink socket (disabled)
[ 20.182038] audit(1196950849.124:1): initialized
[ 20.182123] highmem bounce pool size: 64 pages
[ 20.183987] VFS: Disk quotas dquot_6.5.1
[ 20.184047] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.184175] io scheduler noop registered
[ 20.184177] io scheduler anticipatory registered
[ 20.184180] io scheduler deadline registered
[ 20.184197] io scheduler cfq registered (default)
[ 20.184251] Boot video device is 0000:01:00.0
[ 20.184454] isapnp: Scanning for PnP cards...
[ 20.537701] isapnp: No Plug & Play device found
[ 20.572727] Real Time Clock Driver v1.12ac
[ 20.572846] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.572952] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.574225] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.575037] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.575310] input: Macintosh mouse button emulation as /class/input/input0
[ 20.575400] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 20.578306] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.578315] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.578537] mice: PS/2 mouse device common for all mice
[ 20.578666] EISA: Probing bus 0 at eisa.0
[ 20.578683] Cannot allocate resource for EISA slot 4
[ 20.578687] Cannot allocate resource for EISA slot 5
[ 20.578695] EISA: Detected 0 cards.
[ 20.578833] TCP cubic registered
[ 20.578852] NET: Registered protocol family 1
[ 20.578885] Using IPI No-Shortcut mode
[ 20.579113] Magic number: 3:243:333
[ 20.579256] hash matches device tty54
[ 20.579775] Freeing unused kernel memory: 364k freed
[ 20.617368] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.865675] fuse init (API version 7.8)
[ 21.873919] Capability LSM initialized
[ 22.686100] usbcore: registered new interface driver usbfs
[ 22.686132] usbcore: registered new interface driver hub
[ 22.686157] usbcore: registered new device driver usb
[ 22.687086] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 22.687486] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 22.687499] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 16
[ 22.687514] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 22.687518] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 22.687776] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 22.687797] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfebfd000
[ 22.734065] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 22.748928] usb usb1: configuration #1 chosen from 1 choice
[ 22.748960] hub 1-0:1.0: USB hub found
[ 22.748974] hub 1-0:1.0: 4 ports detected
[ 22.788663] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 22.788672] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 22.851552] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 22.851568] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -> IRQ 17
[ 22.851587] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 22.851590] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 22.851621] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 22.851642] ohci_hcd 0000:00:02.1: irq 17, io mem 0xfebfe000
[ 22.865172] SCSI subsystem initialized
[ 22.870807] libata version 2.21 loaded.
[ 22.908183] usb usb2: configuration #1 chosen from 1 choice
[ 22.908222] hub 2-0:1.0: USB hub found
[ 22.908236] hub 2-0:1.0: 4 ports detected
[ 22.955821] Floppy drive(s): fd0 is 1.44M
[ 23.010511] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 23.010527] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 18
[ 23.010542] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 23.010545] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 23.010579] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 23.010620] ehci_hcd 0000:00:02.2: debug port 1
[ 23.010624] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 23.010636] ehci_hcd 0000:00:02.2: irq 18, io mem 0xfebffc00
[ 23.034772] FDC 0 is a post-1991 82077
[ 23.153648] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 23.153679] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.153829] usb usb3: configuration #1 chosen from 1 choice
[ 23.153860] hub 3-0:1.0: USB hub found
[ 23.153871] hub 3-0:1.0: 8 ports detected
[ 23.258093] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
[ 23.258101] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LKLN] -> GSI 22 (level, low) -> IRQ 16
[ 23.258109] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 23.777241] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:05.0
[ 23.777426] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[ 23.777532] NFORCE3-250: chipset revision 162
[ 23.777535] NFORCE3-250: not 100% native mode: will probe irqs later
[ 23.777542] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[ 23.777555] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
[ 23.777567] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[ 23.777577] Probing IDE interface ide0...
[ 24.343886] Probing IDE interface ide1...
[ 24.567563] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 24.781026] usb 1-1: configuration #1 chosen from 1 choice
[ 25.078889] hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[ 25.086800] usb 1-2: new full speed USB device using ohci_hcd and address 4
[ 25.296311] usb 1-2: configuration #1 chosen from 1 choice
[ 25.602056] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 25.805093] usb 2-1: configuration #1 chosen from 1 choice
[ 25.808861] usbcore: registered new interface driver hiddev
[ 25.817563] input: DragonRise Inc. Generic USB Joystick as /class/input/input2
[ 25.817573] input: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-0000:00:02.0-1
[ 25.817598] usbcore: registered new interface driver usbhid
[ 25.817602] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 25.861760] hdd: LITE-ON CD-RW SOHR-5239V, ATAPI CD/DVD-ROM drive
[ 25.919150] ide1 at 0x170-0x177,0x376 on irq 15
[ 25.938275] sata_nv 0000:00:0a.0: version 3.4
[ 25.938693] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 21
[ 25.938696] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
[ 25.938701] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 21 (level, low) -> IRQ 17
[ 25.938757] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 25.938843] scsi0 : sata_nv
[ 25.938900] scsi1 : sata_nv
[ 25.938969] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001c800 irq 17
[ 25.938973] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001c808 irq 17
[ 25.961795] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 25.961806] Uniform CD-ROM driver Revision: 3.20
[ 25.972183] hdd: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
[ 26.404904] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 26.413080] ata1.00: ATA-7: SAMSUNG HD080HJ, ZH100-33, max UDMA7
[ 26.413084] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 26.421049] ata1.00: configured for UDMA/133
[ 26.732416] ata2: SATA link down (SStatus 0 SControl 300)
[ 26.732577] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD080HJ ZH10 PQ: 0 ANSI: 5
[ 26.744689] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 26.744706] sd 0:0:0:0: [sda] Write Protect is off
[ 26.744709] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.744723] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.744797] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 26.744805] sd 0:0:0:0: [sda] Write Protect is off
[ 26.744808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.744820] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.744827] sda: sda1 sda2 < sda5 sda6 > sda4
[ 26.786232] sd 0:0:0:0: [sda] Attached SCSI disk
[ 26.791740] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 27.102208] Attempting manual resume
[ 27.102213] swsusp: Resume From Partition 8:4
[ 27.102215] PM: Checking swsusp image.
[ 27.102512] PM: Resume from disk failed.
[ 27.143464] kjournald starting. Commit interval 5 seconds
[ 27.143479] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.751586] Linux agpgart interface v0.102 (c) Dave Jones
[ 34.792555] agpgart: Detected AGP bridge 0
[ 34.792577] agpgart: Setting up Nforce3 AGP.
[ 34.792583] agpgart: aperture base > 4G
[ 34.844615] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 34.844644] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 35.557359] [ueagle-atm] driver ueagle 1.4 loaded
[ 35.557409] usb 2-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9032) : Eagle III pots
[ 35.567977] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 35.570108] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.731402] usb 2-1: reset full speed USB device using ohci_hcd and address 2
[ 35.937925] usb 2-1: [ueagle-atm] pre-firmware device, uploading firmware
[ 35.937967] usb 2-1: [ueagle-atm] loading firmware ueagle-atm/eagleIII.fw
[ 35.938095] usbcore: registered new interface driver ueagle-atm
[ 36.058508] usbcore: registered new interface driver xpad
[ 36.058514] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 36.061308] input: PC Speaker as /class/input/input3
[ 36.574169] nvidia: module license 'NVIDIA' taints kernel.
[ 36.835325] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19
[ 36.835342] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 19 (level, low) -> IRQ 19
[ 36.835751] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.23 Thu Oct 4 10:16:34 PDT 2007
[ 36.972285] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 36.975575] parport_pc 00:06: reported by Plug and Play ACPI
[ 36.975625] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 37.159799] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[ 37.159807] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 20 (level, low) -> IRQ 18
[ 37.159834] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 37.480832] intel8x0_measure_ac97_clock: measured 54607 usecs
[ 37.480837] intel8x0: clocking to 46946
[ 38.141525] loop: module loaded
[ 38.189520] lp0: using parport0 (interrupt-driven).
[ 38.245720] Adding 1084376k swap on /dev/sda4. Priority:-1 extents:1 across:1084376k
[ 38.613342] EXT3 FS on sda6, internal journal
[ 38.828868] usb 2-1: [ueagle-atm] firmware uploaded
[ 38.851453] usb 2-1: USB disconnect, address 2
[ 40.236240] No dock devices found.
[ 40.433962] input: Power Button (FF) as /class/input/input5
[ 40.440395] ACPI: Power Button (FF) [PWRF]
[ 40.482491] input: Power Button (CM) as /class/input/input6
[ 40.488939] ACPI: Power Button (CM) [PWRB]
[ 40.724652] powernow-k8: Power state transitions not supported
[ 41.495050] usb 2-1: new full speed USB device using ohci_hcd and address 3
[ 41.707902] usb 2-1: configuration #1 chosen from 1 choice
[ 41.760816] usb 2-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9031) : Eagle III pots
[ 41.938404] usb 2-1: reset full speed USB device using ohci_hcd and address 3
[ 42.210067] usb 2-1: [ueagle-atm] using iso mode
[ 42.210229] usb 2-1: [ueagle-atm] (re)booting started
[ 42.473914] eth0: no link during initialization.
[ 44.261205] usb 2-1: [ueagle-atm] ATU-R firmware version : 44e2ea17
[ 44.323116] usb 2-1: [ueagle-atm] Modem started, waiting synchronization
[ 48.743224] ppdev: user-space parallel port driver
[ 49.439014] usb 2-1: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp)
[ 49.439022] usb 2-1: [ueagle-atm] (re)booting started
[ 49.794216] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 49.794223] apm: overridden by ACPI.
[ 50.268220] Bluetooth: Core ver 2.11
[ 50.268428] NET: Registered protocol family 31
[ 50.268432] Bluetooth: HCI device and connection manager initialized
[ 50.268436] Bluetooth: HCI socket layer initialized
[ 50.294310] Bluetooth: L2CAP ver 2.8
[ 50.294316] Bluetooth: L2CAP socket layer initialized
[ 50.315668] Bluetooth: RFCOMM socket layer initialized
[ 50.315859] Bluetooth: RFCOMM TTY layer initialized
[ 50.315863] Bluetooth: RFCOMM ver 1.8
[ 51.227524] usb 2-1: [ueagle-atm] ATU-R firmware version : 44e2ea17
[ 51.238948] PPP generic driver version 2.4.2
[ 51.276264] NET: Registered protocol family 17
[ 51.286471] usb 2-1: [ueagle-atm] Modem started, waiting synchronization
[ 63.368731] usb 2-1: [ueagle-atm] modem operational
[ 63.538642] NET: Registered protocol family 24
[ 66.589761] ip_tables: (C) 2000-2006 Netfilter Core Team