rendered paste bodysebi@sleptop:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f6a0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6a0000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7500
[ 0.000000] Entering add_active_range(0, 0, 259728) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259728
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259728
[ 0.000000] On node 0 totalpages: 259728
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30115 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F72F0 checksum 0
[ 0.000000] ACPI: RSDP 000F72F0, 0014 (r0 LENOVO)
[ 0.000000] ACPI: RSDT 3F699ADC, 004C (r1 LENOVO TP-62 6040000 ONEL 0)
[ 0.000000] ACPI: FACP 3F69FC78, 0074 (r1 LENOVO CALISTGA 6040000 LNNO 1)
[ 0.000000] ACPI: DSDT 3F69A6F2, 5586 (r1 LENOVO CALISTGA 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3F6A0FC0, 0040
[ 0.000000] ACPI: APIC 3F69FCEC, 0068 (r1 LENOVO APIC 6040000 LNVO 1)
[ 0.000000] ACPI: HPET 3F69FD54, 0038 (r1 LENOVO HPET 6040000 LNVO 1)
[ 0.000000] ACPI: MCFG 3F69FD8C, 003C (r1 LENOVO MCFG 6040000 LNVO 1)
[ 0.000000] ACPI: TCPA 3F69FDC8, 0032 (r1 LENOVO 6040000 NVO 0)
[ 0.000000] ACPI: SLIC 3F69FDFA, 0176 (r1 LENOVO TP-62 6040000 LNVO 1)
[ 0.000000] ACPI: APIC 3F69FF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3F69FFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3F69A4E8, 020A (r1 SataRe SataAhci 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F699B28, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257699
[ 0.000000] Kernel command line: root=UUID=3f71971e-12b7-4364-a9f1-c41caad09101 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1829.058 MHz processor.
[ 18.190896] Console: colour VGA+ 80x25
[ 18.191173] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 18.191705] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.242125] Memory: 1018048k/1038912k available (2015k kernel code, 20176k reserved, 916k data, 364k init, 121408k highmem)
[ 18.242141] virtual kernel memory layout:
[ 18.242143] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 18.242145] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.242147] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 18.242150] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 18.242152] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 18.242154] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 18.242156] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 18.242162] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.242215] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 18.242355] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 18.242364] hpet0: 3 64-bit timers, 14318180 Hz
[ 18.323258] Calibrating delay using timer specific routine.. 3662.61 BogoMIPS (lpj=7325223)
[ 18.323288] Security Framework v1.0.0 initialized
[ 18.323297] SELinux: Disabled at boot.
[ 18.323319] Mount-cache hash table entries: 512
[ 18.323486] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[ 18.323500] monitor/mwait feature present.
[ 18.323503] using mwait in idle threads.
[ 18.323509] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.323513] CPU: L2 cache: 2048K
[ 18.323518] CPU: Physical Processor ID: 0
[ 18.323521] CPU: Processor Core ID: 0
[ 18.323524] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[ 18.323537] Compat vDSO mapped to ffffe000.
[ 18.323555] Checking 'hlt' instruction... OK.
[ 18.339400] SMP alternatives: switching to UP code
[ 18.340064] Early unpacking initramfs... done
[ 18.938480] ACPI: Core revision 20070126
[ 18.938574] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 18.960835] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 18.960862] SMP alternatives: switching to SMP code
[ 18.961006] Booting processor 1/1 eip 3000
[ 18.971394] Initializing CPU#1
[ 19.121967] Calibrating delay using timer specific routine.. 10241.97 BogoMIPS (lpj=20483945)
[ 19.121978] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[ 19.121987] monitor/mwait feature present.
[ 19.121992] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.121995] CPU: L2 cache: 2048K
[ 19.121999] CPU: Physical Processor ID: 0
[ 19.122002] CPU: Processor Core ID: 1
[ 19.122006] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[ 19.122796] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 19.122833] Total of 2 processors activated (13904.58 BogoMIPS).
[ 19.123035] ENABLING IO-APIC IRQs
[ 19.123270] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 19.269863] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 19.289856] Brought up 2 CPUs
[ 19.411657] migration_cost=52
[ 19.411854] Booting paravirtualized kernel on bare hardware
[ 19.411956] Time: 19:22:22 Date: 11/02/107
[ 19.411986] NET: Registered protocol family 16
[ 19.412112] EISA bus registered
[ 19.412119] ACPI: bus type pci registered
[ 19.420586] PCI: PCI BIOS revision 2.10 entry at 0xfd653, last bus=11
[ 19.420590] PCI: Using configuration type 1
[ 19.420593] Setting up standard PCI resources
[ 19.427005] ACPI: EC: Look up EC in DSDT
[ 19.427879] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 19.431104] ACPI: System BIOS is requesting _OSI(Linux)
[ 19.431108] ACPI: Please test with "acpi_osi=!Linux"
[ 19.431111] Please send dmidecode to linux-acpi@vger.kernel.org
[ 19.431897] ACPI: Interpreter enabled
[ 19.431901] ACPI: (supports S0 S3 S4 S5)
[ 19.431929] ACPI: Using IOAPIC for interrupt routing
[ 19.441117] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 19.441204] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.441217] PCI: Probing PCI hardware (bus 00)
[ 19.442095] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 19.442102] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 19.443500] PCI: Transparent bridge - 0000:00:1e.0
[ 19.443576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.444110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 19.444319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 19.444544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 19.448846] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 19.449006] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 19.449161] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 19.449315] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 19.449518] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 19.449676] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 19.449832] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 19.449985] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 19.450173] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.450188] pnp: PnP ACPI init
[ 19.450202] ACPI: bus type pnp registered
[ 19.453639] pnp: PnP ACPI: found 11 devices
[ 19.453643] ACPI: ACPI bus type pnp unregistered
[ 19.453648] PnPBIOS: Disabled by ACPI PNP
[ 19.453719] PCI: Using ACPI for IRQ routing
[ 19.453724] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.497328] NET: Registered protocol family 8
[ 19.497332] NET: Registered protocol family 20
[ 19.497369] Time: tsc clocksource has been installed.
[ 19.497389] Switched to high resolution mode on CPU 0
[ 19.497470] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 19.497476] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 19.497482] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 19.497488] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 19.497500] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 19.497512] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[ 19.497516] Switched to high resolution mode on CPU 1
[ 19.497522] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 19.527991] PCI: Bridge: 0000:00:1c.0
[ 19.527996] IO window: 2000-2fff
[ 19.528005] MEM window: d4000000-d5ffffff
[ 19.528012] PREFETCH window: d0000000-d1ffffff
[ 19.528020] PCI: Bridge: 0000:00:1c.2
[ 19.528025] IO window: 3000-3fff
[ 19.528033] MEM window: d6000000-d7ffffff
[ 19.528040] PREFETCH window: d2000000-d3ffffff
[ 19.528049] PCI: Bridge: 0000:00:1e.0
[ 19.528053] IO window: 4000-4fff
[ 19.528062] MEM window: d8000000-d80fffff
[ 19.528068] PREFETCH window: disabled.
[ 19.528105] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 19.528116] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.528147] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 19.528155] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 19.528173] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 19.528191] NET: Registered protocol family 2
[ 19.573230] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.573303] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 19.575063] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.575680] TCP: Hash tables configured (established 131072 bind 65536)
[ 19.575684] TCP reno registered
[ 19.589743] checking if image is initramfs... it is
[ 20.779411] Freeing initrd memory: 7333k freed
[ 20.779551] Simple Boot Flag at 0x36 set to 0x1
[ 20.780310] audit: initializing netlink socket (disabled)
[ 20.780331] audit(1196623343.048:1): initialized
[ 20.780485] highmem bounce pool size: 64 pages
[ 20.783692] VFS: Disk quotas dquot_6.5.1
[ 20.783774] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.783921] io scheduler noop registered
[ 20.783925] io scheduler anticipatory registered
[ 20.783928] io scheduler deadline registered
[ 20.783954] io scheduler cfq registered (default)
[ 20.783976] Boot video device is 0000:00:02.0
[ 20.784238] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 20.784306] assign_interrupt_mode Found MSI capability
[ 20.784311] Allocate Port Service[0000:00:1c.0:pcie00]
[ 20.784369] Allocate Port Service[0000:00:1c.0:pcie02]
[ 20.784501] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 20.784569] assign_interrupt_mode Found MSI capability
[ 20.784573] Allocate Port Service[0000:00:1c.2:pcie00]
[ 20.784624] Allocate Port Service[0000:00:1c.2:pcie02]
[ 20.784859] isapnp: Scanning for PnP cards...
[ 21.770145] isapnp: No Plug & Play device found
[ 21.807063] Real Time Clock Driver v1.12ac
[ 21.807381] hpet_resources: 0xfed00000 is busy
[ 21.807421] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.809146] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.809484] input: Macintosh mouse button emulation as /class/input/input0
[ 21.809608] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 21.813579] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 21.815832] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.815839] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 21.815844] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 21.815849] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 21.815853] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 21.816130] mice: PS/2 mouse device common for all mice
[ 21.816507] EISA: Probing bus 0 at eisa.0
[ 21.816518] Cannot allocate resource for EISA slot 1
[ 21.816523] Cannot allocate resource for EISA slot 2
[ 21.816527] Cannot allocate resource for EISA slot 3
[ 21.816532] Cannot allocate resource for EISA slot 4
[ 21.816558] EISA: Detected 0 cards.
[ 21.816814] TCP cubic registered
[ 21.816837] NET: Registered protocol family 1
[ 21.816871] Using IPI No-Shortcut mode
[ 21.817118] Magic number: 3:26:394
[ 21.817482] Freeing unused kernel memory: 364k freed
[ 21.909046] input: AT Translated Set 2 keyboard as /class/input/input1
[ 23.156216] AppArmor: AppArmor initialized<5>audit(1196623345.548:2): type=1505 info="AppArmor initialized" pid=1230
[ 23.165824] fuse init (API version 7.8)
[ 23.172990] Failure registering capabilities with primary security module.
[ 23.217653] ACPI: SSDT 3F69A2B7, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 23.217999] ACPI: SSDT 3F69A01E, 0214 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 23.218447] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 23.218855] ACPI: SSDT 3F69A45F, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 23.219177] ACPI: SSDT 3F69A232, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 23.219678] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 4.776000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.780000] Time: hpet clocksource has been installed.
[ 4.780000] ACPI: Thermal Zone [TZS0] (43 C)
[ 4.780000] ACPI: Thermal Zone [TZS1] (41 C)
[ 5.452000] usbcore: registered new interface driver usbfs
[ 5.452000] usbcore: registered new interface driver hub
[ 5.452000] usbcore: registered new device driver usb
[ 5.452000] USB Universal Host Controller Interface driver v3.0
[ 5.452000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 5.452000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 5.452000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.452000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.452000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
[ 5.452000] usb usb1: configuration #1 chosen from 1 choice
[ 5.452000] hub 1-0:1.0: USB hub found
[ 5.452000] hub 1-0:1.0: 2 ports detected
[ 5.556000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 5.556000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 5.556000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.556000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.556000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 5.556000] usb usb2: configuration #1 chosen from 1 choice
[ 5.556000] hub 2-0:1.0: USB hub found
[ 5.556000] hub 2-0:1.0: 2 ports detected
[ 5.596000] 8139too Fast Ethernet driver 0.9.28
[ 5.660000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 5.660000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 5.660000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.660000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 5.660000] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001860
[ 5.660000] usb usb3: configuration #1 chosen from 1 choice
[ 5.660000] hub 3-0:1.0: USB hub found
[ 5.660000] hub 3-0:1.0: 2 ports detected
[ 5.660000] SCSI subsystem initialized
[ 5.712000] libata version 2.21 loaded.
[ 5.764000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20
[ 5.764000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 5.764000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.764000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 5.764000] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00001880
[ 5.764000] usb usb4: configuration #1 chosen from 1 choice
[ 5.768000] hub 4-0:1.0: USB hub found
[ 5.768000] hub 4-0:1.0: 2 ports detected
[ 5.796000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 5.872000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 5.872000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 5.872000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.872000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 5.872000] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.872000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 5.872000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd8444000
[ 5.912000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.912000] usb usb5: configuration #1 chosen from 1 choice
[ 5.912000] hub 5-0:1.0: USB hub found
[ 5.912000] hub 5-0:1.0: 8 ports detected
[ 6.000000] Clocksource tsc unstable (delta = -141815176 ns)
[ 6.016000] ACPI: PCI Interrupt 0000:0a:07.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 6.016000] eth0: RealTek RTL8139 at 0xf8866800, 00:16:d3:22:7e:c6, IRQ 21
[ 6.016000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.016000] ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 6.068000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[d8000000-d80007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 6.076000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 6.076000] ata_piix 0000:00:1f.1: version 2.11
[ 6.076000] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 6.076000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.076000] scsi0 : ata_piix
[ 6.076000] scsi1 : ata_piix
[ 6.076000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
[ 6.076000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
[ 6.320000] usb 1-2: device not accepting address 2, error -71
[ 6.448000] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HA01, max UDMA/33
[ 6.620000] ata1.00: configured for UDMA/33
[ 6.620000] ata2: port disabled. ignoring.
[ 6.624000] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HA01 PQ: 0 ANSI: 5
[ 6.624000] ahci 0000:00:1f.2: version 2.2
[ 6.624000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 6.652000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.652000] Uniform CD-ROM driver Revision: 3.20
[ 6.652000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.660000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.184000] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 7.328000] usb 5-5: configuration #1 chosen from 1 choice
[ 7.368000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae40619200523]
[ 7.636000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 7.636000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 7.636000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 7.636000] scsi2 : ahci
[ 7.636000] scsi3 : ahci
[ 7.636000] scsi4 : ahci
[ 7.636000] scsi5 : ahci
[ 7.636000] ata3: SATA max UDMA/133 cmd 0xf8868500 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 7.636000] ata4: SATA max UDMA/133 cmd 0xf8868580 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 7.636000] ata5: SATA max UDMA/133 cmd 0xf8868600 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 7.636000] ata6: SATA max UDMA/133 cmd 0xf8868680 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 8.000000] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 8.156000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.156000] ata3.00: ATA-8: SAMSUNG HM250JI, HS100-08, max UDMA7
[ 8.156000] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 8.160000] ata3.00: configured for UDMA/133
[ 8.176000] usb 1-2: configuration #1 chosen from 1 choice
[ 8.420000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 8.468000] ata4: SATA link down (SStatus 0 SControl 0)
[ 8.584000] usb 3-2: configuration #1 chosen from 1 choice
[ 8.796000] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.828000] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 9.020000] usb 4-1: configuration #1 chosen from 1 choice
[ 9.048000] usbcore: registered new interface driver hiddev
[ 9.060000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 9.060000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
[ 9.076000] input: IBM IBM Standard USB Keyboard as /class/input/input3
[ 9.076000] input: USB HID v1.00 Keyboard [IBM IBM Standard USB Keyboard] on usb-0000:00:1d.3-1
[ 9.088000] input: IBM IBM Standard USB Keyboard as /class/input/input4
[ 9.092000] input: USB HID v1.00 Mouse [IBM IBM Standard USB Keyboard] on usb-0000:00:1d.3-1
[ 9.092000] usbcore: registered new interface driver usbhid
[ 9.092000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 9.108000] ata6: SATA link down (SStatus 0 SControl 0)
[ 9.116000] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM250JI HS10 PQ: 0 ANSI: 5
[ 9.116000] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 9.128000] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 9.128000] sd 2:0:0:0: [sda] Write Protect is off
[ 9.128000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.128000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.128000] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 9.128000] sd 2:0:0:0: [sda] Write Protect is off
[ 9.128000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.128000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.128000] sda: sda1 sda2 < sda5 > sda3 sda4
[ 9.724000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 10.076000] Attempting manual resume
[ 10.076000] swsusp: Resume From Partition 8:5
[ 10.076000] PM: Checking swsusp image.
[ 10.076000] PM: Resume from disk failed.
[ 10.088000] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[ 10.088000] ReiserFS: sda1: using ordered data mode
[ 10.100000] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 10.100000] ReiserFS: sda1: checking transaction log (sda1)
[ 10.140000] ReiserFS: sda1: Using r5 hash to sort names
[ 19.432000] Linux agpgart interface v0.102 (c) Dave Jones
[ 19.680000] agpgart: Detected an Intel 945GM Chipset.
[ 19.680000] agpgart: Detected 7932K stolen memory.
[ 19.712000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 19.852000] intel_rng: FWH not detected
[ 19.916000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.920000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.260000] iTCO_vendor_support: vendor-support=0
[ 20.336000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 20.544000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 20.576000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 20.580000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 20.580000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.640000] ieee80211_crypt: registered algorithm 'NULL'
[ 20.712000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 20.712000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 20.800000] sdhci: Secure Digital Host Controller Interface driver
[ 20.800000] sdhci: Copyright(c) Pierre Ossman
[ 20.800000] sdhci: SDHCI controller found at 0000:0a:01.1 [1180:0822] (rev 19)
[ 20.800000] ACPI: PCI Interrupt 0000:0a:01.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 20.800000] mmc0: SDHCI at 0xd8000800 irq 22 DMA
[ 20.888000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 20.888000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 20.888000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 20.888000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 20.888000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 21.176000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 21.176000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 21.840000] lp: driver loaded but no devices found
[ 21.896000] Adding 2393644k swap on /dev/sda5. Priority:-1 extents:1 across:2393644k
[ 22.764000] ipw3945: Radio Frequency Kill Switch is On:
[ 22.764000] Kill switch must be turned off for wireless networking to work.
[ 22.820000] hda_intel: azx_get_response timeout, switching to polling mode...
[ 38.752000] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[ 38.752000] ReiserFS: sda3: using ordered data mode
[ 38.768000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 38.768000] ReiserFS: sda3: checking transaction log (sda3)
[ 38.812000] ReiserFS: sda3: Using r5 hash to sort names
[ 38.952000] kjournald starting. Commit interval 5 seconds
[ 38.952000] EXT3 FS on sda4, internal journal
[ 38.952000] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.916000] ACPI: AC Adapter [ADP1] (on-line)
[ 39.932000] No dock devices found.
[ 40.008000] input: Power Button (FF) as /class/input/input6
[ 40.008000] ACPI: Power Button (FF) [PWRF]
[ 40.008000] input: Lid Switch as /class/input/input7
[ 40.008000] ACPI: Lid Switch [LID0]
[ 40.008000] input: Sleep Button (CM) as /class/input/input8
[ 40.008000] ACPI: Sleep Button (CM) [SLPB]
[ 40.240000] ACPI: Battery Slot [BAT0] (battery present)
[ 40.260000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 40.264000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 41.300000] ppdev: user-space parallel port driver
[ 41.508000] audit(1196623382.589:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5157 profile="/usr/sbin/cupsd"
[ 41.556000] apm: BIOS not found.
[ 41.636000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 42.132000] Failure registering capabilities with primary security module.
[ 42.372000] Bluetooth: Core ver 2.11
[ 42.372000] NET: Registered protocol family 31
[ 42.372000] Bluetooth: HCI device and connection manager initialized
[ 42.372000] Bluetooth: HCI socket layer initialized
[ 42.404000] Bluetooth: L2CAP ver 2.8
[ 42.404000] Bluetooth: L2CAP socket layer initialized
[ 42.440000] Bluetooth: RFCOMM socket layer initialized
[ 42.440000] Bluetooth: RFCOMM TTY layer initialized
[ 42.440000] Bluetooth: RFCOMM ver 1.8
[ 46.712000] NET: Registered protocol family 17
[ 47.268000] [drm] Initialized drm 1.1.0 20060810
[ 47.272000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 47.272000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 51.436000] NET: Registered protocol family 10
[ 51.436000] lo: Disabled Privacy Extensions
[ 61.820000] eth0: no IPv6 routers present
sebi@sleptop:~$