root@thrakkorzog:~/gllin$ lib/ld-linux.so.2 --library-path /home/root/gllin/lib:/home/root/gllin/usr/lib /home/root/gllin/gllin.real -h
ERROR: incorrect parameter: -h
**********************************************************************************
Usage:
-help Help
-board <type> Defines board type Ex: '-board matchbox'
supported: matchbox, trident
-com <com port> GPS com port; Ex: '-com com6'
-baud <baud rate> Set baud rate; Ex: '-baud 115200'
-rft <RF type> Set RF type; Ex: '-rft RF_LN22OUT'
-freq <freq plan> | ? set frequency plan for GPS or show the list of all available plans
Ex: '-freq FRQ_PLAN_OCXO_10000'
Ex: '-freq ?' -- Show all available plans
-g <URL> SUPL Server URL or IP address;
Ex: '-g 216.15.9.46'
-p <port> SUPL Server port number;
Ex: '-p 9118'
-udp <port> Local UDP port to send NMEA to.
'-udp 6000' [default]
-gsm_cell <cell ID> set GSM Cell ID information
cell ID has the following format: '<MCC>.<MNC>.<LAC>.<CI>'
Where:
MCC - Mobile Country Code
MNC - Mobile Network Code
LAC - Location Area Code
CI - Cell Identification
Ex: '-gsm_cell 310.170.367.25732'
-set_assisted_off disable SET assisted capability
-set_based_off disable SET based capability
-msisdn <MSISDN> set value for MSISDN (international phone number) as SET id
Ex: '-msisdn 14081234567'
-nai <nai> specify Network Access Identifier as SET id
Ex: '-nai 12345@mywebsite.com'
-periodic <s> make periodic request every s second (-1 to 64)
-1 single shot: perform one fix, then quit
0 native: perform fixes as fast as possible
<s> timed: report a position every <s> seconds
where <s> is 1 to 64
-recover recover GLLIN after signaled exit
-low [<count>] low level test. Default <count> is 1
-low_debug Low level debug ON
+low_debug Low level debug OFF
-train <count> Send train data <count> times
+pty | -pty Enable or disable NMEA output to pty "/tmp/nmeaPTY"
Default is off [-pty]
+np | -np Enable or disable NMEA output to named pipe "/tmp/nmeaNP"
Default is on [-np]
+nmea | -nmea Enable or disable NMEA output to log file
Default is off [-nmea]
+daemon | -daemon Become a daemon (or not)
Default is -daemon
-a2 | -a3 | -a0 Select a GTA01 board revision. Default is a3
-batch <st> <n> <fix> perform batch test of <n> starts of type <st>
<st> is hot, warm, cold, or SNR.
Each start has <fix> fixes.
-i start GLLIN command line
+pnd optimize for PND
-pnd look for low signal strength signals
+sim using simulator so don't use almanac
-sim not using simulator
SNR manufacturing SNR test mode
hot hot start [default]
warm warm start
cold cold start
-v[n] Report GLLIN version string.
n is 1234 to report selected versions.
version 1.1.7
**********************************************************************************