rendered paste body$
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER **
QNAP SYSTEMS, INC.
** MARVELL BOARD: RD-88F5182-NAS-2 LE
U-Boot 1.1.1 (Aug 1 2007 - 16:47:15) Marvell version: 1.11.2
DRAM CS[0] base 0x00000000 size 128MB
DRAM Total size 128MB
[8192kB@ff000000] [0kB@f8000000] ## Unknown FLASH at f8000000: Size = 0x00000000 = 0 MB
Flash: 8 MB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
Soc: 88F5182 A2
CPU: ARM926 (Rev 0) running @ 500Mhz
Orion 1 streaming disabled
SysClock = 166Mhz , TClock = 166Mhz
USB 0: host mode
USB 1: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Net: egiga0
Hit any key to stop autoboot: 0
## Booting image at ff000000 ...
Image Name: Linux-2.6.12.6-arm1
Created: 2007-10-21 19:30:04 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1779260 Bytes = 1.7 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux................................................................................................................... done, booting the ker.
Linux version 2.6.12.6-arm1 (root@NASARM2) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #2 Mon Oct 22 03:29:57 CST 2007
CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ)
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Machine: MV-88fxx81
Using UBoot passing parameters structure
Sys Clk = 166666667, Tclk = 166666667
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 root=/dev/ram rw initrd=0x800000,0x3fffff
PID hash table entries: 1024 (order: 10, 16384 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 128MB 0MB 0MB 0MB = 128MB total
Memory: 121984KB available (3095K code, 457K data, 112K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4095K
NET: Registered protocol family 16
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 128MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB
PEX0_IO ....base f2000000, size 1MB
PCI0_MEM ....base e8000000, size 128MB
PCI0_IO ....base f2100000, size 1MB
INTER_REGS ....base f1000000, size 1MB
DEVICE_CS0 ....no such
DEVICE_CS1 ....base f4000000, size 16MB
DEVICE_CS2 ....no such
DEV_BOOCS ....base ff800000, size 8MB
CRYPTO ENG ....base f0000000, size 64KB
Marvell Development Board (LSP Version 1.10.3_DB_NAS)-- RD-88F5182-NAS-2 Soc: 88F5182 A2
Detected Tclk 166666667 and SysClk 166666667
Marvell USB EHCI Host controller #0: c04dc560
Marvell USB EHCI Host controller #1: c04dc460
pexBarOverlapDetect: winNum 2 overlap current 0
mvPexInit:Warning :Bar 2 size is illigal
it will be disabled
please check Pex and CPU windows configuration
PCI: bus0: Fast back to back transfers enabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
QNAP RTC initializing....
Initializing RTC is completed.
Detected Tclk 166666667, BASE_BAUD 10416666, Baud divisor 542
qnap_pic_init: succeed to register misc device
Use the XOR engines (offloading) for enhancing the following functions:
o RAID 5 Xor calculation
o kernel memcpy
o kenrel memzero
o copy user to/from kernel buffers
Number of XOR engines to use: 2
cesadev_init(c001237c)
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Marvell Gigabit Ethernet Driver 'egiga':
o Ethernet descriptors in DRAM
o DRAM SW cache-coherency
o Checksum offload enabled
o Marvell ethtool proc enabled
o Loading network interface 'eth0'
STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
physmap flash device: 800000 at ff800000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition definition
Creating 6 MTD partitions on "phys_mapped_flash":
0x00780000-0x00800000 : "U-Boot"
0x00000000-0x00200000 : "Kernel"
0x00200000-0x00600000 : "RootFS1"
0x00600000-0x00700000 : "RootFS2"
0x00760000-0x00780000 : "U-Boot Config"
0x00700000-0x00760000 : "NAS Config"
ehci_platform ehci_platform.4523: EHCI Host Controller
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
ehci_platform ehci_platform.4523: park 0
ehci_platform ehci_platform.4523: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_platform ehci_platform.16781: EHCI Host Controller
ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2
ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000
ehci_platform ehci_platform.16781: park 0
ehci_platform ehci_platform.16781: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
USB Universal Host Controller Interface driver v2.2
usb 2-1: new high speed USB device using ehci_platform and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
qh_schedule: frame=255, uframe=0, cmask=0x0, smask=0x1, period=256, u_period=2048
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
arm4regs : 354.000 MB/sec
8regs : 259.600 MB/sec
32regs : 294.800 MB/sec
raid5: using function: arm4regs (354.000 MB/sec)
raid6: int32x1 17 MB/s
raid6: int32x2 28 MB/s
raid6: int32x4 34 MB/s
raid6: int32x8 15 MB/s
raid6: using algorithm int32x4 (34 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 112K
Start config_util...
config_util: _get_field(Internal Model = TS-201)
config_util: command=/bin/umount /dev/mtdblock5 2>/dev/null 1>/dev/null
config_util: _umount_partition:0
DEFAULT_MAX_HD_SLOT=5, Max_HD_Slot=2
Mac address = 00:08:9B:AC:72:FF
config_util: hd1 does not exist.
config_util: hd1 does not exist.
config_util: hd2 does not exist.
config_util: hd2 does not exist.
config_util: No initialized HD exists.
config_util: _get_field(Internal Model = TS-201)
config_util: command=/bin/umount /dev/mtdblock5 2>/dev/null 1>/dev/null
config_util: _umount_partition:0
DEFAULT_MAX_HD_SLOT=5, Max_HD_Slot=2
Mac address = 00:08:9B:AC:72:FF
config_util: hd1 does not exist.
config_util: hd1 does not exist.
config_util: hd2 does not exist.
config_util: hd2 does not exist.
config_util: No initialized HD exists.
Some errors occurred while running config_util.
config_util finished.
mount HDD root device
/dev/md9: Invalid argument
mount: you must specify the filesystem type
mount /dev/md9 failed.
Update Extended rcX_init.d...
dd: /dev/sda4: Invalid argument
Extract RootFS2...
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/ram0 8919 8191 728 92% /
/dev/mtdblock3 1003 383 569 40% /rootfs2_tmp
sysinfo: Module loaded.
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
create proc entry succeed!
NTFS driver 2.1.22 [Flags: R/W MODULE].
initializing MAC address...
eth0: mac address changed
log hidden config directory not exist, initial 10K log file...
storage_boot_init 3 ...
storage_boot_init: booting without HD
storage_boot_init 4 ...
storage_boot_init: Check all HDs status for setting LED
storage_boot_init: status of /dev/sda3 is -1
NASAC72FF
Stopping network...Stopped.
Starting network...DHCP
network.sh: write_hosts
169.254.100.100
Speed: 100
Starting thttpd services: thttpd.
config_util: _get_field(Internal Model = TS-201)
config_util: command=/bin/umount /dev/mtdblock5 2>/dev/null 1>/dev/null
config_util: _umount_partition:0
DEFAULT_MAX_HD_SLOT=5, Max_HD_Slot=2
Mac address = 00:08:9B:AC:72:FF
config_util: hd1 does not exist.
config_util: hd1 does not exist.
config_util: hd2 does not exist.
config_util: hd2 does not exist.
config_util: No initialized HD exists.
init_check.sh: No HD existed.
telnetd: starting
port: 13131; login program: /bin/naslogin
create /usr/bin/passwd
The system had been started 1 time(s).
network.sh: write_hosts
169.254.100.100
Welcome to QNAP Systems Inc,. Marvell(169.254.100.100) development environment.
NASAC72FF login: