rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6d60
[ 0.000000] Entering add_active_range(0, 0, 259712) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259712
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259712
[ 0.000000] On node 0 totalpages: 259712
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30099 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6CB0 checksum 0
[ 0.000000] ACPI: RSDP 000F6CB0, 0024 (r2 ACRSYS)
[ 0.000000] ACPI: XSDT 3F686E3C, 0084 (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: APIC 3F68DC04, 0068 (r1 Acer Acadia 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3F68DC6C, 0038 (r1 Acer Acadia 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3F68DCA4, 003C (r1 Acer Acadia 6040000 LOHR 5A)
[ 0.000000] ACPI: SLIC 3F68DCE0, 0176 (r1 ACRSYS ACRPRDCT 6040000 LOHR 0)
[ 0.000000] ACPI: DBGP 3F68DE56, 0034 (r1 Acer Acadia 6040000 LOHR 0)
[ 0.000000] ACPI: FACP 3F68DE8A, 00F4 (r3 Acer Acadia 6040000 LOHR 1)
[ 0.000000] ACPI: DSDT 3F687CB7, 5ED9 (r1 Acer CALISTGA 6040000 INTL 20060608)
[ 0.000000] ACPI: FACS 3F68EFC0, 0040
[ 0.000000] ACPI: APIC 3F68DF7E, 005A (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3F68DFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3F687AAD, 020A (r1 SataRe SataAhci 1000 INTL 20050228)
[ 0.000000] ACPI: SSDT 3F6875EB, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
[ 0.000000] ACPI: SSDT 3F68738C, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 3F686EC0, 04CC (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257683
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.154 MHz processor.
[ 67.085211] Console: colour VGA+ 80x25
[ 67.085521] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 67.085829] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 67.113600] Memory: 1017964k/1038848k available (2015k kernel code, 20108k reserved, 916k data, 364k init, 121344k highmem)
[ 67.113609] virtual kernel memory layout:
[ 67.113611] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 67.113612] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 67.113613] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 67.113614] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 67.113616] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 67.113617] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 67.113618] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 67.113621] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 67.113659] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 67.113815] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 67.113820] hpet0: 3 64-bit timers, 14318180 Hz
[ 67.194766] Calibrating delay using timer specific routine.. 3195.68 BogoMIPS (lpj=6391378)
[ 67.194790] Security Framework v1.0.0 initialized
[ 67.194798] SELinux: Disabled at boot.
[ 67.194812] Mount-cache hash table entries: 512
[ 67.194955] CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001
[ 67.194964] monitor/mwait feature present.
[ 67.194967] using mwait in idle threads.
[ 67.194973] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 67.194975] CPU: L2 cache: 1024K
[ 67.194978] CPU: After all inits, caps: afebfbff 20100000 00000000 00003940 0000e31d 00000000 00000001
[ 67.194989] Compat vDSO mapped to ffffe000.
[ 67.195004] Checking 'hlt' instruction... OK.
[ 67.210875] SMP alternatives: switching to UP code
[ 67.211102] Freeing SMP alternatives: 11k freed
[ 67.211378] Early unpacking initramfs... done
[ 67.569246] ACPI: Core revision 20070126
[ 67.569300] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 67.602269] CPU0: Intel(R) Celeron(R) M CPU 520 @ 1.60GHz stepping 06
[ 67.602297] Total of 1 processors activated (3195.68 BogoMIPS).
[ 67.602503] ENABLING IO-APIC IRQs
[ 67.602703] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 67.750272] Brought up 1 CPUs
[ 67.750376] Booting paravirtualized kernel on bare hardware
[ 67.750462] Time: 11:10:19 Date: 10/23/107
[ 67.750482] NET: Registered protocol family 16
[ 67.750560] EISA bus registered
[ 67.750565] ACPI: bus type pci registered
[ 67.750696] PCI: PCI BIOS revision 2.10 entry at 0xfd603, last bus=6
[ 67.750698] PCI: Using configuration type 1
[ 67.750699] Setting up standard PCI resources
[ 67.752785] ACPI: EC: Look up EC in DSDT
[ 67.753520] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 67.755199] ACPI: System BIOS is requesting _OSI(Linux)
[ 67.755202] ACPI: Please test with "acpi_osi=!Linux"
[ 67.755203] Please send dmidecode to linux-acpi@vger.kernel.org
[ 67.755793] ACPI: Interpreter enabled
[ 67.755797] ACPI: (supports S0 S3 S4 S5)
[ 67.755812] ACPI: Using IOAPIC for interrupt routing
[ 67.815735] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 67.815781] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 67.815797] PCI: Probing PCI hardware (bus 00)
[ 67.816596] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 67.816601] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 67.817737] PCI: Transparent bridge - 0000:00:1e.0
[ 67.817818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 67.818132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 67.818280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 67.818417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 67.818564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 67.821148] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
[ 67.821258] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
[ 67.821364] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
[ 67.821469] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
[ 67.821574] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 *10 12 14 15)
[ 67.821678] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *0, disabled.
[ 67.821783] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
[ 67.821887] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
[ 67.821999] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 67.822011] pnp: PnP ACPI init
[ 67.822021] ACPI: bus type pnp registered
[ 67.847028] pnp: PnP ACPI: found 10 devices
[ 67.847030] ACPI: ACPI bus type pnp unregistered
[ 67.847034] PnPBIOS: Disabled by ACPI PNP
[ 67.847081] PCI: Using ACPI for IRQ routing
[ 67.847084] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 67.847088] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 67.847152] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 67.870217] NET: Registered protocol family 8
[ 67.870219] NET: Registered protocol family 20
[ 67.870279] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 67.870283] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 67.870286] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 67.870289] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 67.870296] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 67.874124] Time: tsc clocksource has been installed.
[ 67.874139] Switched to high resolution mode on CPU 0
[ 67.900563] PCI: Bridge: 0000:00:1c.0
[ 67.900564] IO window: disabled.
[ 67.900570] MEM window: disabled.
[ 67.900575] PREFETCH window: disabled.
[ 67.900581] PCI: Bridge: 0000:00:1c.2
[ 67.900582] IO window: disabled.
[ 67.900589] MEM window: d0000000-d00fffff
[ 67.900593] PREFETCH window: disabled.
[ 67.900599] PCI: Bridge: 0000:00:1c.3
[ 67.900601] IO window: disabled.
[ 67.900607] MEM window: d0100000-d01fffff
[ 67.900611] PREFETCH window: disabled.
[ 67.900623] PCI: Bridge: 0000:00:1e.0
[ 67.900624] IO window: disabled.
[ 67.900631] MEM window: d0200000-d02fffff
[ 67.900635] PREFETCH window: disabled.
[ 67.900667] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 67.900678] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 67.900703] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 67.900709] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 67.900734] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 67.900740] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 67.900752] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[ 67.900759] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 67.900769] NET: Registered protocol family 2
[ 67.938065] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 67.938152] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 67.939152] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 67.939579] TCP: Hash tables configured (established 131072 bind 65536)
[ 67.939582] TCP reno registered
[ 67.950192] checking if image is initramfs... it is
[ 68.649173] Freeing initrd memory: 7305k freed
[ 68.649317] Simple Boot Flag at 0x36 set to 0x1
[ 68.649674] audit: initializing netlink socket (disabled)
[ 68.649689] audit(1195816219.128:1): initialized
[ 68.649758] highmem bounce pool size: 64 pages
[ 68.651448] VFS: Disk quotas dquot_6.5.1
[ 68.651492] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 68.651583] io scheduler noop registered
[ 68.651586] io scheduler anticipatory registered
[ 68.651588] io scheduler deadline registered
[ 68.651602] io scheduler cfq registered (default)
[ 68.651616] Boot video device is 0000:00:02.0
[ 68.651782] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 68.651843] assign_interrupt_mode Found MSI capability
[ 68.651846] Allocate Port Service[0000:00:1c.0:pcie00]
[ 68.651878] Allocate Port Service[0000:00:1c.0:pcie02]
[ 68.651979] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 68.652040] assign_interrupt_mode Found MSI capability
[ 68.652042] Allocate Port Service[0000:00:1c.2:pcie00]
[ 68.652070] Allocate Port Service[0000:00:1c.2:pcie02]
[ 68.652172] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 68.652233] assign_interrupt_mode Found MSI capability
[ 68.652236] Allocate Port Service[0000:00:1c.3:pcie00]
[ 68.652265] Allocate Port Service[0000:00:1c.3:pcie02]
[ 68.652424] isapnp: Scanning for PnP cards...
[ 69.006526] isapnp: No Plug & Play device found
[ 69.026579] Real Time Clock Driver v1.12ac
[ 69.026826] hpet_resources: 0xfed00000 is busy
[ 69.026851] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 69.027923] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 69.028101] input: Macintosh mouse button emulation as /class/input/input0
[ 69.028172] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 69.065598] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 69.065605] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 69.065775] mice: PS/2 mouse device common for all mice
[ 69.068846] EISA: Probing bus 0 at eisa.0
[ 69.068853] Cannot allocate resource for EISA slot 1
[ 69.068866] Cannot allocate resource for EISA slot 5
[ 69.068881] EISA: Detected 0 cards.
[ 69.068971] TCP cubic registered
[ 69.068984] NET: Registered protocol family 1
[ 69.069008] Using IPI No-Shortcut mode
[ 69.069173] Magic number: 15:540:176
[ 69.069215] hash matches device ttyr2
[ 69.069294] hash matches device device:0c
[ 69.069460] Freeing unused kernel memory: 364k freed
[ 69.097068] input: AT Translated Set 2 keyboard as /class/input/input1
[ 70.280403] AppArmor: AppArmor initialized<5>audit(1195816220.628:2): type=1505 info="AppArmor initialized" pid=1235
[ 70.288490] fuse init (API version 7.8)
[ 70.293944] Failure registering capabilities with primary security module.
[ 70.309794] Monitor-Mwait will be used to enter C-1 state
[ 70.309798] Monitor-Mwait will be used to enter C-2 state
[ 70.309801] Monitor-Mwait will be used to enter C-3 state
[ 70.309806] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 70.309810] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 70.309822] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 3.076000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.080000] Time: hpet clocksource has been installed.
[ 3.080000] ACPI: Thermal Zone [TZ00] (40 C)
[ 3.096000] ACPI: Thermal Zone [TZ01] (40 C)
[ 3.652000] usbcore: registered new interface driver usbfs
[ 3.652000] usbcore: registered new interface driver hub
[ 3.652000] usbcore: registered new device driver usb
[ 3.656000] USB Universal Host Controller Interface driver v3.0
[ 3.656000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.656000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.656000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.656000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.656000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x000050a0
[ 3.656000] usb usb1: configuration #1 chosen from 1 choice
[ 3.656000] hub 1-0:1.0: USB hub found
[ 3.656000] hub 1-0:1.0: 2 ports detected
[ 3.760000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[ 3.760000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.760000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.760000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.760000] uhci_hcd 0000:00:1d.1: irq 18, io base 0x000050c0
[ 3.760000] usb usb2: configuration #1 chosen from 1 choice
[ 3.760000] hub 2-0:1.0: USB hub found
[ 3.760000] hub 2-0:1.0: 2 ports detected
[ 3.772000] SCSI subsystem initialized
[ 3.776000] libata version 2.21 loaded.
[ 3.864000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 3.864000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.864000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.864000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.864000] uhci_hcd 0000:00:1d.2: irq 17, io base 0x000050e0
[ 3.864000] usb usb3: configuration #1 chosen from 1 choice
[ 3.864000] hub 3-0:1.0: USB hub found
[ 3.864000] hub 3-0:1.0: 2 ports detected
[ 3.968000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20
[ 3.968000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.968000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.968000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.968000] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00005400
[ 3.968000] usb usb4: configuration #1 chosen from 1 choice
[ 3.968000] hub 4-0:1.0: USB hub found
[ 3.968000] hub 4-0:1.0: 2 ports detected
[ 4.072000] tg3.c:v3.77 (May 31, 2007)
[ 4.072000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 4.072000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 4.112000] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:e4:ad:ea
[ 4.112000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 4.112000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.112000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 4.112000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.112000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.112000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.112000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.112000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.112000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd0644000
[ 4.116000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.116000] usb usb5: configuration #1 chosen from 1 choice
[ 4.116000] hub 5-0:1.0: USB hub found
[ 4.116000] hub 5-0:1.0: 8 ports detected
[ 4.220000] ata_piix 0000:00:1f.1: version 2.11
[ 4.220000] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18
[ 4.220000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 4.220000] scsi0 : ata_piix
[ 4.220000] scsi1 : ata_piix
[ 4.220000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00015090 irq 14
[ 4.220000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00015098 irq 15
[ 4.500000] Clocksource tsc unstable (delta = -387972571 ns)
[ 4.556000] ata1.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33
[ 4.744000] ata1.00: configured for UDMA/33
[ 4.744000] ata2: port disabled. ignoring.
[ 4.744000] scsi 0:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5
[ 4.744000] ahci 0000:00:1f.2: version 2.2
[ 4.744000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[ 4.756000] sr0: scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.756000] Uniform CD-ROM driver Revision: 3.20
[ 4.756000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.760000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 5.740000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.748000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 5.748000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 5.748000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.748000] scsi2 : ahci
[ 5.748000] scsi3 : ahci
[ 5.748000] scsi4 : ahci
[ 5.748000] scsi5 : ahci
[ 5.748000] ata3: SATA max UDMA/133 cmd 0xf8860500 ctl 0x00000000 bmdma 0x00000000 irq 18
[ 5.748000] ata4: SATA max UDMA/133 cmd 0xf8860580 ctl 0x00000000 bmdma 0x00000000 irq 18
[ 5.748000] ata5: SATA max UDMA/133 cmd 0xf8860600 ctl 0x00000000 bmdma 0x00000000 irq 18
[ 5.748000] ata6: SATA max UDMA/133 cmd 0xf8860680 ctl 0x00000000 bmdma 0x00000000 irq 18
[ 5.800000] ISO 9660 Extensions: RRIP_1991A
[ 6.032000] Registering unionfs 1.4
[ 6.032000] unionfs: debugging is not enabled
[ 6.044000] loop: module loaded
[ 6.232000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.596000] ata3.00: ATA-7: TOSHIBA MK8037GSX, DL250J, max UDMA/100
[ 6.596000] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 6.596000] ata3.00: configured for UDMA/100
[ 6.908000] ata4: SATA link down (SStatus 0 SControl 0)
[ 7.220000] ata5: SATA link down (SStatus 0 SControl 0)
[ 7.532000] ata6: SATA link down (SStatus 0 SControl 0)
[ 7.532000] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL25 PQ: 0 ANSI: 5
[ 7.532000] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.540000] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 7.540000] sd 2:0:0:0: [sda] Write Protect is off
[ 7.540000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.540000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.540000] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 7.540000] sd 2:0:0:0: [sda] Write Protect is off
[ 7.540000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.540000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.540000] sda: sda1 sda2
[ 7.628000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.976000] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
[ 92.852000] Linux agpgart interface v0.102 (c) Dave Jones
[ 93.064000] agpgart: Detected an Intel 945GM Chipset.
[ 93.064000] agpgart: Detected 7932K stolen memory.
[ 93.080000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 93.168000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 93.480000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 94.160000] iTCO_vendor_support: vendor-support=0
[ 94.160000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 94.408000] input: PS/2 Mouse as /class/input/input2
[ 94.440000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[ 94.444000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 94.444000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 94.576000] intel_rng: FWH not detected
[ 94.908000] ieee80211_crypt: registered algorithm 'NULL'
[ 94.908000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 94.908000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 95.060000] sdhci: Secure Digital Host Controller Interface driver
[ 95.060000] sdhci: Copyright(c) Pierre Ossman
[ 95.060000] sdhci: SDHCI controller found at 0000:06:00.1 [1524:0750] (rev 0)
[ 95.060000] PCI: Enabling device 0000:06:00.1 (0000 -> 0002)
[ 95.060000] ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 20 (level, low) -> IRQ 21
[ 95.060000] PCI: Setting latency timer of device 0000:06:00.1 to 64
[ 95.060000] mmc0: SDHCI at 0xd0200400 irq 21 DMA
[ 95.068000] sdhci: SDHCI controller found at 0000:06:00.3 [1524:0751] (rev 0)
[ 95.068000] PCI: Enabling device 0000:06:00.3 (0000 -> 0002)
[ 95.068000] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 20 (level, low) -> IRQ 21
[ 95.068000] mmc1: SDHCI at 0xd0200100 irq 21 PIO
[ 95.372000] bcm43xx driver
[ 95.372000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 95.372000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 95.804000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 95.804000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 98.256000] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
[ 100.800000] ACPI: AC Adapter [ACAD] (on-line)
[ 100.976000] ACPI: Battery Slot [BAT1] (battery present)
[ 100.992000] No dock devices found.
[ 101.060000] input: Power Button (FF) as /class/input/input4
[ 101.064000] ACPI: Power Button (FF) [PWRF]
[ 101.100000] input: Lid Switch as /class/input/input5
[ 101.104000] ACPI: Lid Switch [LID]
[ 101.140000] input: Sleep Button (CM) as /class/input/input6
[ 101.144000] ACPI: Sleep Button (CM) [SLPB]
[ 101.180000] input: Power Button (CM) as /class/input/input7
[ 101.184000] ACPI: Power Button (CM) [PWRB]
[ 101.320000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 101.328000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 107.380000] lp: driver loaded but no devices found
[ 107.488000] PM: Writing back config space on device 0000:04:00.0 at offset c (was 40920000, writing 0)
[ 107.780000] ppdev: user-space parallel port driver
[ 109.440000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 110.496000] apm: BIOS not found.
[ 111.148000] Failure registering capabilities with primary security module.
[ 111.468000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 112.264000] Bluetooth: Core ver 2.11
[ 112.264000] NET: Registered protocol family 31
[ 112.264000] Bluetooth: HCI device and connection manager initialized
[ 112.264000] Bluetooth: HCI socket layer initialized
[ 112.476000] Bluetooth: L2CAP ver 2.8
[ 112.476000] Bluetooth: L2CAP socket layer initialized
[ 112.696000] Bluetooth: RFCOMM socket layer initialized
[ 112.696000] Bluetooth: RFCOMM TTY layer initialized
[ 112.696000] Bluetooth: RFCOMM ver 1.8
[ 123.660000] [drm] Initialized drm 1.1.0 20060810
[ 123.708000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 123.708000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 133.560000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 155.588000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 177.616000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 199.644000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 221.672000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 243.708000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 266.168000] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[ 266.228000] ieee80211_crypt: unregistered algorithm 'NULL'
[ 293.432000] kjournald starting. Commit interval 5 seconds
[ 293.432000] EXT3 FS on sda1, internal journal
[ 293.432000] EXT3-fs: mounted filesystem with ordered data mode.