rendered paste bodyxinevdr ~ # lsmod
Module Size Used by
snd_seq 49984 0
snd_seq_device 7828 1 snd_seq
snd_intel8x0 29160 0
snd_ac97_codec 97496 1 snd_intel8x0
ac97_bus 4288 1 snd_ac97_codec
snd_pcm 68168 2 snd_intel8x0,snd_ac97_codec
snd_timer 20104 2 snd_seq,snd_pcm
snd 42672 6 snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 9680 2 snd_intel8x0,snd_pcm
nvidia 7005748 0
xinevdr ~ # dmesg | grep DVB
xinevdr ~ # dmesg | grep frontend
xinevdr ~ # modprobe dvb-usb-gp8psk
xinevdr ~ # modprobe dvb-ttpci
xinevdr ~ # modprobe bttv i2c_hw=1 card=0x71
xinevdr ~ # modprobe dvb-bt8xx
xinevdr ~ # modprobe dst
xinevdr ~ #
xinevdr ~ # lsmod
Module Size Used by
dst 30856 1
dvb_bt8xx 18500 0
bt878 12200 2 dst,dvb_bt8xx
bttv 202196 2 dvb_bt8xx,bt878
ir_common 34692 1 bttv
compat_ioctl32 11200 1 bttv
btcx_risc 6600 1 bttv
tveeprom 19856 1 bttv
lnbp21 4160 1
stv0299 13000 1
dvb_ttpci 106368 0
saa7146_vv 51776 1 dvb_ttpci
saa7146 18696 2 dvb_ttpci,saa7146_vv
videobuf_dma_sg 14276 2 bttv,saa7146_vv
videobuf_core 19204 3 bttv,saa7146_vv,videobuf_dma_sg
videodev 29312 2 bttv,saa7146_vv
v4l2_common 20800 4 bttv,compat_ioctl32,saa7146_vv,videodev
v4l1_compat 15492 3 bttv,saa7146_vv,videodev
ttpci_eeprom 4416 1 dvb_ttpci
dvb_usb_gp8psk 15556 0
dvb_usb 22476 1 dvb_usb_gp8psk
dvb_core 86292 5 dst,dvb_bt8xx,stv0299,dvb_ttpci,dvb_usb
snd_seq 49984 0
snd_seq_device 7828 1 snd_seq
snd_intel8x0 29160 0
snd_ac97_codec 97496 1 snd_intel8x0
ac97_bus 4288 1 snd_ac97_codec
snd_pcm 68168 2 snd_intel8x0,snd_ac97_codec
snd_timer 20104 2 snd_seq,snd_pcm
snd 42672 6 snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 9680 2 snd_intel8x0,snd_pcm
nvidia 7005748 0
xinevdr ~ #
xinevdr ~ #
xinevdr ~ # dmesg | grep DVB
dvb-usb: found a 'Genpix SkyWalker-CW3K DVB-S receiver' in warm state.
DVB: registering new adapter (Genpix SkyWalker-CW3K DVB-S receiver)
DVB: registering frontend 0 (Genpix 8psk-to-USB2 DVB-S)...
dvb-usb: Genpix SkyWalker-CW3K DVB-S receiver successfully initialized and connected.
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3)
DVB: registering frontend 1 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:09.0/0000:01:07.0/input/input2
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
DVB: registering new adapter (bttv0)
DVB: registering frontend 2 (DST DVB-S)...
xinevdr ~ #
xinevdr ~ # dmesg | grep frontend
DVB: registering frontend 0 (Genpix 8psk-to-USB2 DVB-S)...
DVB: registering frontend 1 (ST STV0299 DVB-S)...
DVB: registering frontend 2 (DST DVB-S)...
xinevdr ~ #