All pastes #795935 Raw Edit

Anonymous

public text v1 · immutable
#795935 ·published 2007-11-24 16:35 UTC
rendered paste body
root@sam-laptop:/home/sam# smartctl --all /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Fujitsu MHV series
Device Model:     FUJITSU MHV2080BH PL
Serial Number:    NW9ZT682CN6U
Firmware Version: 892C
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 4a
Local Time is:    Sat Nov 24 16:19:08 2007 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 ( 471) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  55) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail  Always       -       190005
  2 Throughput_Performance  0x0005   100   100   030    Pre-fail  Offline      -       22151168
  3 Spin_Up_Time            0x0003   100   100   025    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       891
  5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail  Always       -       8589934592000
  7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail  Always       -       1035
  8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail  Offline      -       0
  9 Power_On_Seconds        0x0032   098   098   000    Old_age   Always       -       0h+24m+06s
 10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       629
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       172
193 Load_Cycle_Count        0x0032   098   098   000    Old_age   Always       -       40668
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       34 (Lifetime Min/Max 12/49)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       3291
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       458883072
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail  Always       -       8838
203 Run_Out_Cancel          0x0002   100   100   000    Old_age   Always       -       2632749547577
240 Head_Flying_Hours       0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      1137         -
# 2  Short offline       Completed without error       00%      1136         -
# 3  Short offline       Completed without error       00%         4         -
# 4  Short offline       Completed without error       00%         3         -
# 5  Short offline       Completed without error       00%         3         -
# 6  Short offline       Completed without error       00%         3         -
# 7  Short offline       Completed without error       00%         2         -
# 8  Short offline       Completed without error       00%         2         -
# 9  Short offline       Completed without error       00%         2         -
#10  Short offline       Completed without error       00%         1         -
#11  Short offline       Completed without error       00%         1         -
#12  Short offline       Completed without error       00%         0         -
#13  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@sam-laptop:/home/sam# smartctl --all /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Fujitsu MHV series
Device Model:     FUJITSU MHV2080BH PL
Serial Number:    NW9ZT682CN6U
Firmware Version: 892C
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 4a
Local Time is:    Sat Nov 24 16:19:29 2007 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 ( 471) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  55) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail  Always       -       190005
  2 Throughput_Performance  0x0005   100   100   030    Pre-fail  Offline      -       22151168
  3 Spin_Up_Time            0x0003   100   100   025    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       891
  5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail  Always       -       8589934592000
  7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail  Always       -       1073
  8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail  Offline      -       0
  9 Power_On_Seconds        0x0032   098   098   000    Old_age   Always       -       0h+24m+06s
 10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       629
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       172
193 Load_Cycle_Count        0x0032   098   098   000    Old_age   Always       -       40668
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       34 (Lifetime Min/Max 12/49)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       3291
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       458883072
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail  Always       -       8878
203 Run_Out_Cancel          0x0002   100   100   000    Old_age   Always       -       2632751251574
240 Head_Flying_Hours       0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      1137         -
# 2  Short offline       Completed without error       00%      1136         -
# 3  Short offline       Completed without error       00%         4         -
# 4  Short offline       Completed without error       00%         3         -
# 5  Short offline       Completed without error       00%         3         -
# 6  Short offline       Completed without error       00%         3         -
# 7  Short offline       Completed without error       00%         2         -
# 8  Short offline       Completed without error       00%         2         -
# 9  Short offline       Completed without error       00%         2         -
#10  Short offline       Completed without error       00%         1         -
#11  Short offline       Completed without error       00%         1         -
#12  Short offline       Completed without error       00%         0         -
#13  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.