NetBSD 3.1 (GENERIC) #0: Tue Oct 31 04:27:07 UTC 2006
builds@b0.netbsd.org:/home/builds/ab/netbsd-3-1-RELEASE/i386/200610302053Z-obj/home/builds/ab/netbsd-3-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 486 MB
avail memory = 467 MB
BIOS32 rev. 0 found at 0xfd740
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Transmeta Pentium Pro compatible (686-class), 1599.91 MHz, id 0xf24
cpu0: features 2fcbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 2fcbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features 2fcbf9ff<FXSR,SSE,SSE2,B27,LONG>
cpu0: "Transmeta Efficeon(tm) Processor TM8000"
cpu0: running without thermal monitor!
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Transmeta product 0x0060 (rev. 0x00)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: Transmeta product 0x0061 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (AGP) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 2 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
pcib0 at pci0 dev 3 function 0
pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x20)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 3 function 1 not configured
auacer0 at pci0 dev 4 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at irq 7
auacer0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
auacer0: ac97: ext id 607<AC97_22,AMAP,SPDIF,DRA,VRA>
audio0 at auacer0: full duplex, mmap, independent
Acer Labs product 0x5457 (modem communications, revision 0x10) at pci0 dev 4 function 1 not configured
ath0 at pci0 dev 6 function 0
ath0: interrupting at irq 3
ath0: mac 5.9 phy 4.3 5ghz radio 4.6
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0 at pci0 dev 9 function 0: Ricoh 5C475 PCI-CardBus bridge (rev. 0x81)
cbb0: NOT USED because of unconfigured interrupt
rtk0 at pci0 dev 10 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 5
rtk0: Ethernet address 08:00:1f:c3:0f:52
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aceride0 at pci0 dev 14 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc5)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
ohci0 at pci0 dev 15 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 15 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: single transaction translator
uhub1: 6 ports with 6 removable, self powered
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
isapnp0: no ISA Plug 'n Play devices found
pcic0: controller 0 detecting irqs with mask 0xdeb8: none
pcic0: no available irq; polling for socket events
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MHT2040AT SP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <UJDA765 DVD/CDRW, , 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)