rendered paste body
Module Size Used by
md5 7680 1
ipv6 238016 6
snd_mixer_oss 18304 0
snd 46820 1 snd_mixer_oss
sworks_agp 10912 0
nvidia_agp 9756 0
intel_agp 22300 1
ati_agp 10380 0
amd_k7_agp 10380 0
ali_agp 9216 0
autofs4 19076 1
ext3 123912 1
jbd 65572 1 ext3
agpgart 31440 6 sworks_agp,nvidia_agp,intel_agp,ati_agp,amd_k7_agp,ali_agp
maestro 34440 1
soundcore 11104 3 snd,maestro
i2c_piix4 11408 0
i2c_core 20992 1 i2c_piix4
parport_pc 38724 0
parport 33480 1 parport_pc
8250 42844 0
serial_core 21120 1 8250
usbhid 42464 0
af_packet 24328 0
pcnet_cs 19508 1
8390 12160 1 pcnet_cs
pcmcia 23696 5 pcnet_cs
yenta_socket 22152 3
rsrc_nonstatic 14080 1 yenta_socket
pcmcia_core 43268 4 pcnet_cs,pcmcia,yenta_socket,rsrc_nonstatic
apm 22252 2
rtc 13900 0
unionfs 68088 1
cloop 19232 1
sbp2 24584 0
ohci1394 33460 0
ieee1394 297432 2 sbp2,ohci1394
usb_storage 68544 0
ohci_hcd 21764 0
uhci_hcd 31632 0
usbcore 102492 5 usbhid,usb_storage,ohci_hcd,uhci_hcd
knoppix@0[knoppix]$ dmseg
bash: dmseg: command not found
knoppix@0[knoppix]$ \dmesg
Linux version 2.6.12 (root@Knoppix) (gcc-Version 3.3.6 (Debian 1:3.3.6-7)) #2 SMP Tue Aug 9 23:20:52 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bfe0000 (usable)
BIOS-e820: 000000000bfe0000 - 000000000bff0000 (ACPI data)
BIOS-e820: 000000000bff0000 - 000000000c000000 (reserved)
BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
On node 0 totalpages: 49120
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45024 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 TOSHIB ) @ 0x000f7550
ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x0bfe0000
ACPI: FADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x0bfe0054
ACPI: DSDT (v001 TOSHIB 2740 0x20000228 MSFT 0x0100000a) @ 0x00000000
ACPI: BIOS age (2000) fails cutoff (2002), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 10100000 (gap: 10100000:efe80000)
Built 1 zonelists
Kernel command line: ### isk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01282000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 497.617 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 188888k/196480k available (1882k kernel code, 7104k reserved, 999k data, 296k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 980.99 BogoMIPS (lpj=490496)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
CPU0: Intel Celeron (Coppermine) stepping 03
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 845k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xff85c, last bus=21
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f8eb0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9690, dseg 0x0
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:05.0
PCI: IRQ 0 for device 0000:00:0b.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:0b.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: IRQ 0 for device 0000:00:0b.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:0b.1
PCI: Sharing IRQ 11 with 0000:00:0c.0
audit: initializing netlink socket (disabled)
audit(1195860131.183:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xf0000000, mapped to 0xcc880000, using 3072k, total 8192k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c000:8751
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:05.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK1214GAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DV-28E-0, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 23579136 sectors (12072 MB), CHS=23392/16/63
hda: cache flushes not supported
hda: hda1 hda2 < hda5 hda6 >
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.11 loaded.
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 15
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
input: AT Translated Set 2 keyboard on isa0060/serio0
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:05.2
PCI: Sharing IRQ 11 with 0000:00:07.0
uhci_hcd 0000:00:05.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:05.2: irq 11, io base 0x0000ff80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev hda.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev hda.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.02
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 30344 blocks, 65536 bytes/block, largest block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 20050921-1517
Freeing unused kernel memory: 296k freed
Real Time Clock Driver v1.12
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 0000:00:0b.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000007
PCI: Found IRQ 11 for device 0000:00:0b.1
PCI: Sharing IRQ 11 with 0000:00:0c.0
Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000011
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x3f8-0x3ff 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x3f8-0x3ff 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:0D:0B:B1:33:FA
NET: Registered protocol family 17
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
piix4_smbus 0000:00:05.3: Found 0000:00:05.3 device
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
maestro: Configuring ESS Maestro 2E found at IO 0xFC00 IRQ 11
maestro: subvendor id: 0x00011179
maestro: not attempting power management.
maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf
maestro: 1 channels configured.
maestro: version 0.15 time 22:38:56 Aug 9 2005
Linux agpgart interface v0.101 (c) Dave Jones
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Adding 425680k swap on /dev/hda5. Priority:-1 extents:1
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 128M @ 0xe8000000
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0381d00(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
knoppix@0[knoppix]$