Script started on Thu 22 Nov 2007 22:14:09 CST
wesnoth:/home/debian-cd# . CONF.sh && make distclean && make status && make official_images
rm -rf /home/Debiancd/tmp/etch/CD[1234567890]*
rm -f /home/Debiancd/tmp/etch/*.filelist*
rm -f /home/Debiancd/tmp/etch/packages-stamp /home/Debiancd/tmp/etch/upgrade-stamp /home/Debiancd/tmp/etch/md5-check
echo "Cleaning the build directory"
Cleaning the build directory
rm -rf /home/Debiancd/apttmp
rm -rf /home/Debiancd/tmp
mkdir -p /home/Debiancd/tmp
mkdir -p /home/Debiancd/tmp/etch
mkdir -p /home/Debiancd/apttmp
date '+%Y%m%d' > /home/Debiancd/tmp/etch/DATE
if [ ! -d /home/debian-cd/data/sid ] ; then \
ln -s etch /home/debian-cd/data/sid ; \
fi
if [ ! -d /home/debian-cd/tools/boot/sid ] ; then \
ln -s etch /home/debian-cd/tools/boot/sid ; \
fi
Generating a fake status file for apt-get and apt-cache...
for ARCH in i386; do \
mkdir -p /home/Debiancd/apttmp/etch-$ARCH; \
if [ $ARCH = "source" -o "" = "1" -o "" = "2" ];then \
:> /home/Debiancd/apttmp/etch-$ARCH/status ; \
else \
zcat /home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/main/binary-$ARCH/Packages.gz | \
perl -000 -ne 's/^(Package: .*)$/$1\nStatus: install ok installed/m; print if (/^Priority: (required|important|standard)/m or /^Section: base/m);' \
>> /home/Debiancd/apttmp/etch-$ARCH/status ; \
fi; \
done;
:> /home/Debiancd/apttmp/status
for ARCH in i386; do \
export ARCH=$ARCH; \
/home/debian-cd/tools/apt-selection update; \
done
Get:1 file: etch Release.gpg [378B]
Get:2 file: etch Release [58.2kB]
Reading package lists...
for ARCH in i386; do \
export ARCH=$ARCH; \
/home/debian-cd/tools/apt-selection check || make correctstatus; \
done
Reading package lists...
Building dependency tree...
You might want to run `apt-get -f install' to correct these.
The following packages have unmet dependencies:
bind9-host: Depends: libisccfg1 but it is not installed
dnsutils: Depends: libisccfg1 but it is not installed
libbind9-0: Depends: libisccfg1 but it is not installed
nfs-common: Depends: ucf but it is not installed
Depends: libgssapi2 but it is not installed
openssh-client: Depends: libedit2 (>= 2.5.cvs.20010821-1) but it is not installed
pciutils: Depends: libpci2 but it is not installed
python: Depends: python2.4 (>= 2.4.4) but it is not installed
python-minimal: Depends: python2.4-minimal (>= 2.4.4) but it is not installed
E: Unmet dependencies. Try using -f.
make[1]: Entering directory `/home/debian-cd'
if [ ! -d /home/debian-cd/data/sid ] ; then \
ln -s etch /home/debian-cd/data/sid ; \
fi
if [ ! -d /home/debian-cd/tools/boot/sid ] ; then \
ln -s etch /home/debian-cd/tools/boot/sid ; \
fi
if [ "i386" != "source" ] ; then \
for ARCH in i386; do \
echo "Apt-get is updating its files ..."; \
ARCH=$ARCH /home/debian-cd/tools/apt-selection update; \
done; \
fi
Apt-get is updating its files ...
Get:1 file: etch Release.gpg [378B]
Get:2 file: etch Release [58.2kB]
Reading package lists...
set -e; \
if [ "i386" != "source" ] ; then \
for ARCH in i386; do \
export ARCH=$ARCH; \
for i in `/home/debian-cd/tools/apt-selection deselected -f install`; do \
echo $ARCH:$i; \
perl -i -000 -ne "print unless /^Package: \Q$i\E/m" \
/home/Debiancd/apttmp/etch-$ARCH/status; \
done; \
done; \
fi
set -e; \
if [ "i386" != "source" ] ; then \
for ARCH in i386; do \
export ARCH=$ARCH; \
for i in `/home/debian-cd/tools/apt-selection selected -f install`; do \
echo $ARCH:$i; \
/home/debian-cd/tools/apt-selection cache dumpavail | perl -000 -ne \
"s/^(Package: .*)\$/\$1\nStatus: install ok installed/m; \
print if /^Package: \Q$i\E\s*\$/m;" \
>> /home/Debiancd/apttmp/etch-$ARCH/status; \
done; \
done; \
fi
i386:libedit2
i386:libgssapi2
i386:libisccc0
i386:libisccfg1
i386:libpci2
i386:python2.4
i386:python2.4-minimal
i386:ucf
for ARCH in i386; do \
ARCH=$ARCH /home/debian-cd/tools/apt-selection check; \
done
Reading package lists...
Building dependency tree...
make[1]: Leaving directory `/home/debian-cd'
if [ ! -d /home/debian-cd/data/sid ] ; then \
ln -s etch /home/debian-cd/data/sid ; \
fi
if [ ! -d /home/debian-cd/tools/boot/sid ] ; then \
ln -s etch /home/debian-cd/tools/boot/sid ; \
fi
if [ "i386" != "source" ] ; then \
for ARCH in i386; do \
echo "Apt-get is updating its files ..."; \
ARCH=$ARCH /home/debian-cd/tools/apt-selection update; \
done; \
fi
Apt-get is updating its files ...
Get:1 file: etch Release.gpg [378B]
Get:2 file: etch Release [58.2kB]
Reading package lists...
if [ ""x != "yes"x ] ; then \
if [ ""x = "1"x ] ; then \
echo >> /home/Debiancd/tmp/etch/rawlist; \
elif [ ""x = "2"x ] ; then \
echo -e "mawk\nunifont\npptp-linux" >>/home/Debiancd/tmp/etch/rawlist; \
else \
echo -e "mawk\nexim4-daemon-light\nunifont\npptp-linux" >>/home/Debiancd/tmp/etch/rawlist; \
fi; \
fi
if [ ""x != "yes"x ] ; then \
if [ _ != _1 ]; then \
for ARCH in i386; do \
debootstrap --arch $ARCH --print-debs etch /home/Debiancd/tmp/debootstrap.tmp file:/home/kgoetz/Desktop/ToPng/Debian/DebianMirror/ 2>/dev/null \
| tr ' ' '\n' >>/home/Debiancd/tmp/etch/rawlist; \
rm -rf /home/Debiancd/tmp/debootstrap.tmp; \
done; \
fi; \
fi
for ARCH in i386; do \
ARCHDEFS="$ARCHDEFS -D ARCH_$ARCH"; \
ARCHUNDEFS="$ARCHUNDEFS -U $ARCH"; \
done; \
if [ ""x != "yes"x ] ; then \
cat /home/debian-cd/tasks/Debian_etch | \
cpp -nostdinc -nostdinc++ -P -undef $ARCHDEFS \
$ARCHUNDEFS -U i386 -U linux -U unix \
-DFORCENONUSONCD1=0 \
-I /home/debian-cd/tasks -I /home/Debiancd/tmp/etch - - >> /home/Debiancd/tmp/etch/rawlist; \
fi
cc1: warning: command line option "-nostdinc++" is valid for C++/ObjC++ but not for C
cc1: warning: command line option "-nostdinc++" is valid for C++/ObjC++ but not for C
if [ ""x = "yes"x ] ; then \
awk '/^Package:/ {print $2}' /home/Debiancd/apttmp/etch-source/apt-state/lists/*Sources | \
sort -u > /home/Debiancd/tmp/etch/rawlist; \
fi
Generating the complete list of packages to be included in /home/Debiancd/tmp/etch/list...
perl -ne 'chomp; next if /^\s*$/; \
print "$_\n" if not $seen{$_}; $seen{$_}++;' \
/home/Debiancd/tmp/etch/rawlist \
> /home/Debiancd/tmp/etch/list
if [ -n "" ]; then \
for ARCH in i386; do \
ARCHDEFS="$ARCHDEFS -D ARCH_$ARCH"; \
ARCHUNDEFS="$ARCHUNDEFS -U $ARCH"; \
done; \
perl -npe 's/\@ARCH\@//g' | \
cpp -nostdinc -nostdinc++ -P -undef $ARCHDEFS \
$ARCHUNDEFS -U i386 -U linux -U unix \
-DFORCENONUSONCD1=0 \
-I /home/debian-cd/tasks -I /home/Debiancd/tmp/etch - - >> /home/Debiancd/tmp/etch/rawlist-exclude; \
else \
echo > /home/Debiancd/tmp/etch/rawlist-exclude; \
fi
Generating the complete list of packages to be removed ...
perl -ne 'chomp; next if /^\s*$/; \
print "$_\n" if not $seen{$_}; $seen{$_}++;' \
/home/Debiancd/tmp/etch/rawlist-exclude \
> /home/Debiancd/tmp/etch/list.exclude
for ARCH in i386; do \
ARCH=$ARCH /home/debian-cd/tools/list2cds /home/Debiancd/tmp/etch/list 2000000000000; \
done
Running list2cds to sort packages for i386:
Generating dependency tree with apt-cache depends...
Adding standard, required, important and base packages first
S/R/I/B packages take 201934488 bytes
Adding the rest of the requested packages
Now up to 13698061894 bytes
Done: processed/sorted 18251 packages, total size 13698061894 bytes.
if [ ""x = "yes"x ] ; then \
awk '{printf("source:%s\n",$0)}' /home/Debiancd/tmp/etch/list > /home/Debiancd/tmp/etch/packages; \
else \
/home/debian-cd/tools/merge_package_lists /home/Debiancd/tmp/etch /home/Debiancd/apttmp "i386" /home/Debiancd/tmp/etch/packages; \
fi
/home/debian-cd/tools/make_disc_trees.pl /home/debian-cd /home/kgoetz/Desktop/ToPng/Debian/DebianMirror/ /home/Debiancd/tmp etch "i386" mkisofs
Starting to lay out packages into CD (650MiB CD) images: 332031 2K-blocks maximum per image
Starting new i386 CD 1 at /home/Debiancd/tmp/etch/CD1
Adding the required directories
Generating the image label and volume id
Adding tools to CD1
Adding .disk/base_components
Adding .disk/cd_type
Adding udeb/base includes/excludes
ERROR: Unable to read UDEB_EXCLUDE file /home/debian-cd/data/etch/i386_udeb_exclude
Adding docs to CD1
Adding common docs on CD#1
Adding installtools
Adding Release files
Trying to add upgrade* directories
(Optionally) making the image bootable for i386:
Running tools/boot/etch/boot-i386 1 /home/Debiancd/tmp/etch/CD1
Using ISOLINUX boot-disks image on CD1
Starting the md5sum.txt file
Placing packages into image 1
Checking base is installable for i386
Found all files needed for debootstrap for all binary arches
Finishing off the Release file
Finishing off md5sum.txt
CD 1 filled with 1221 packages, 331260 blocks, 678420480 bytes
Finished: 1221 packages placed
/home/debian-cd/tools/grab_md5 /home/kgoetz/Desktop/ToPng/Debian/DebianMirror/ "i386" etch etch /home/Debiancd/tmp/etch/md5-check
Looking in /home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/ /home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/
Using MD5 sums from Packages files:
/home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/main/binary-i386/Packages.gz
/home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/main/debian-installer/binary-i386/Packages.gz
/home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/main/binary-i386/Packages.gz
/home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/main/debian-installer/binary-i386/Packages.gz
Using MD5 sums from d-i: /home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/main/installer-i386/current/images/MD5SUMS
Using MD5 sums from d-i: /home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/main/installer-i386/images/images/MD5SUMS
cat: /home/kgoetz/Desktop/ToPng/Debian/DebianMirror//dists/etch/main/installer-i386/images/images/MD5SUMS: No such file or directory
for ARCH in i386; do \
if [ -e /home/debian-cd/data/etch/$ARCH/extra-sources ]; then \
echo "Extra dedicated source added; need to grab source MD5 info too"; \
/home/debian-cd/tools/grab_md5 /home/kgoetz/Desktop/ToPng/Debian/DebianMirror/ source etch etch /home/Debiancd/tmp/etch/md5-check; \
fi; \
done
/home/debian-cd/tools/make_image "/home/Debiancd/tmp/etch" "i386" "/home/Debiancd/debian-cd-test" "0" "4.0" "/home/kgoetz/Desktop/ToPng/Debian/DebianMirror/" "mkisofs" "-r" "-jigdo-min-file-size 0 -jigdo-exclude 'README*' -jigdo-exclude /doc/ -jigdo-exclude /md5sum.txt -jigdo-exclude /.disk/ -jigdo-exclude /pics/ -jigdo-exclude 'Release*' -jigdo-exclude 'Packages*' -jigdo-exclude 'Sources*' -jigdo-force-md5 /pool/" "/home/debian-cd/tools/jigdo_cleanup"
Generating the i386 iso/jigdo images ...
Last-minute updates:
README.html
README.txt
Thu Nov 22 22:16:30 CST 2007
mkisofs -r -V Debian 4.0 i386 Bin-1 -o /home/Debiancd/debian-cd-test/debian-40-i386-CD-1.iso -J -cache-inodes -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table boot1 CD1
I: -input-charset not specified, using utf-8 (detected in locale settings)
Using RED_L000.PNG;1 for CD1/pics/red-lowerright.png (red-lowerleft.png)
Using BLUE_000.PNG;1 for CD1/pics/blue-lowerright.png (blue-lowerleft.png)
Using BLUE_001.PNG;1 for CD1/pics/blue-upperright.png (blue-upperleft.png)
Using RED_U000.PNG;1 for CD1/pics/red-upperright.png (red-upperleft.png)
Using BUG_L000.TXT;1 for CD1/doc/bug-log-mailserver.txt (bug-log-access.txt)
Using BUG_M000.TXT;1 for CD1/doc/bug-maint-info.txt (bug-maint-mailcontrol.txt)
Using DEBIA000.GZ;1 for CD1/doc/FAQ/debian-faq.en.pdf.gz (debian-faq.en.txt.gz)
Using FOOTN000.HTM;1 for CD1/doc/FAQ/html/footnotes.en.html (footnotes.html)
Using CH_FT000.HTM;1 for CD1/doc/FAQ/html/ch-ftparchives.html (ch-ftparchives.en.html)
Using CH_CU000.HTM;1 for CD1/doc/FAQ/html/ch-customizing.html (ch-customizing.en.html)
Using CH_CO000.HTM;1 for CD1/doc/FAQ/html/ch-compat.en.html (ch-compat.html)
Using CH_BA000.HTM;1 for CD1/doc/FAQ/html/ch-basic_defs.html (ch-basic_defs.en.html)
Using CH_FA000.HTM;1 for CD1/doc/FAQ/html/ch-faqinfo.html (ch-faqinfo.en.html)
Using CH_KE000.HTM;1 for CD1/doc/FAQ/html/ch-kernel.html (ch-kernel.en.html)
Using CH_RE000.HTM;1 for CD1/doc/FAQ/html/ch-redistrib.en.html (ch-redistrib.html)
Using CH_UP000.HTM;1 for CD1/doc/FAQ/html/ch-uptodate.en.html (ch-uptodate.html)
Using CH_PK000.HTM;1 for CD1/doc/FAQ/html/ch-pkgtools.en.html (ch-pkgtools.html)
Using CH_SU000.HTM;1 for CD1/doc/FAQ/html/ch-support.html (ch-support.en.html)
Using CH_GE000.HTM;1 for CD1/doc/FAQ/html/ch-getting.en.html (ch-getting.html)
Using CH_NE000.HTM;1 for CD1/doc/FAQ/html/ch-nexttime.en.html (ch-nexttime.html)
Using CH_PK001.HTM;1 for CD1/doc/FAQ/html/ch-pkg_basics.html (ch-pkg_basics.en.html)
Using CH_CO001.HTM;1 for CD1/doc/FAQ/html/ch-contributing.html (ch-contributing.en.html)
Using CH_SO000.HTM;1 for CD1/doc/FAQ/html/ch-software.en.html (ch-software.html)
Using GNOME000 for CD1/pool/main/g/gnome-themes (gnome-themes-extras)
Using GNOME001 for CD1/pool/main/g/gnome-keyring (gnome-keyring-manager)
Using GNOME002 for CD1/pool/main/g/gnome-games-extra-data (gnome-games)
Using GST_P000.10 for CD1/pool/main/g/gst-plugins-good0.10 (gst-plugins-base0.10)
Using GST_P001.10 for CD1/pool/main/g/gst-plugins-base0.10 (gst-plugins-ugly0.10)
Using GNOME003 for CD1/pool/main/g/gnome-system-monitor (gnome-system-tools)
Using GNOME004 for CD1/pool/main/g/gnome-media (gnome-menus)
Using GNOME005 for CD1/pool/main/g/gnome-python (gnome-python-desktop)
Using GNOME006 for CD1/pool/main/g/gnome-pilot (gnome-pilot-conduits)
Using GNOME007 for CD1/pool/main/g/gnome-nettool (gnome-netstatus)
Using LIBST000.DEB;1 for CD1/pool/main/g/gcc-4.1/libstdc++6_4.1.1-21_i386.deb (libstdc++6-4.1-dev_4.1.1-21_i386.deb)
Using GCC_4000.DEB;1 for CD1/pool/main/g/gcc-4.1/gcc-4.1_4.1.1-21_i386.deb (gcc-4.1-base_4.1.1-21_i386.deb)
Using LIBMU000.DEB;1 for CD1/pool/main/g/gcc-4.1/libmudflap0_4.1.1-21_i386.deb (libmudflap0-dev_4.1.1-21_i386.deb)
Using GRAPH000.DEB;1 for CD1/pool/main/g/graphicsmagick/graphicsmagick_1.1.7-13_i386.deb (graphicsmagick-imagemagick-compat_1.1.7-13_all.deb)
Using LIBGT000.DEB;1 for CD1/pool/main/g/gtk+2.0/libgtk2.0-bin_2.8.20-7_all.deb (libgtk2.0-0_2.8.20-7_i386.deb)
Using LIBGT001.DEB;1 for CD1/pool/main/g/gtk+2.0/libgtk2.0-0_2.8.20-7_i386.deb (libgtk2.0-common_2.8.20-7_all.deb)
Using GNOME000.DEB;1 for CD1/pool/main/g/gnome-panel/gnome-panel-data_2.14.3-5_all.deb (gnome-panel_2.14.3-5_i386.deb)
Using GNOME000.DEB;1 for CD1/pool/main/g/gnome-applets/gnome-applets_2.14.3-4_i386.deb (gnome-applets-data_2.14.3-4_all.deb)
Using GSTRE000.DEB;1 for CD1/pool/main/g/gst-plugins-base0.10/gstreamer0.10-x_0.10.10-4_i386.deb (gstreamer0.10-gnomevfs_0.10.10-4_i386.deb)
Using GSTRE001.DEB;1 for CD1/pool/main/g/gst-plugins-base0.10/gstreamer0.10-gnomevfs_0.10.10-4_i386.deb (gstreamer0.10-plugins-base_0.10.10-4_i386.deb)
Using GSTRE002.DEB;1 for CD1/pool/main/g/gst-plugins-base0.10/gstreamer0.10-plugins-base_0.10.10-4_i386.deb (gstreamer0.10-alsa_0.10.10-4_i386.deb)
Using LIBGN000.DEB;1 for CD1/pool/main/g/gnome-vfs2/libgnomevfs2-bin_2.14.2-7_i386.deb (libgnomevfs2-common_2.14.2-7_all.deb)
Using LIBGN001.DEB;1 for CD1/pool/main/g/gnome-vfs2/libgnomevfs2-common_2.14.2-7_all.deb (libgnomevfs2-extra_2.14.2-7_i386.deb)
Using LIBGN002.DEB;1 for CD1/pool/main/g/gnome-vfs2/libgnomevfs2-extra_2.14.2-7_i386.deb (libgnomevfs2-0_2.14.2-7_i386.deb)
Using GNOME000.DEB;1 for CD1/pool/main/g/gnome-games/gnome-games_2.16.3-1_i386.deb (gnome-games-data_2.16.3-1_all.deb)
Using GNOME000.DEB;1 for CD1/pool/main/g/gnome-media/gnome-media-common_2.14.2-4_all.deb (gnome-media_2.14.2-4_i386.deb)
Using GSTRE000.DEB;1 for CD1/pool/main/g/gst-plugins-good0.10/gstreamer0.10-plugins-good_0.10.4-4_i386.deb (gstreamer0.10-esd_0.10.4-4_i386.deb)
Using LIBGT000.DEB;1 for CD1/pool/main/g/gtksourceview/libgtksourceview-common_1.8.3-1_all.deb (libgtksourceview1.0-0_1.8.3-1_i386.deb)
Using GETTE000.DEB;1 for CD1/pool/main/g/gettext/gettext-base_0.16.1-1_i386.deb (gettext_0.16.1-1_i386.deb)
Using LIBGL000.DEB;1 for CD1/pool/main/g/glib2.0/libglib2.0-data_2.12.4-2_all.deb (libglib2.0-0_2.12.4-2_i386.deb)
Using GNOME000.DEB;1 for CD1/pool/main/g/gnome-terminal/gnome-terminal_2.14.2-1_i386.deb (gnome-terminal-data_2.14.2-1_all.deb)
Using LIBBO000 for CD1/pool/main/libb/libbonoboui (libbonobo)
Using LIBBO000.DEB;1 for CD1/pool/main/libb/libbonobo/libbonobo2-common_2.14.0-3_i386.deb (libbonobo2-0_2.14.0-3_i386.deb)
Using LIBBO000.DEB;1 for CD1/pool/main/libb/libbonoboui/libbonoboui2-common_2.14.0-5_all.deb (libbonoboui2-0_2.14.0-5_i386.deb)
Using OPENS000.DEB;1 for CD1/pool/main/o/openssh/openssh-server_4.3p2-9_i386.deb (openssh-client_4.3p2-9_i386.deb)
Using OPENS000.UDE;1 for CD1/pool/main/o/openssh/openssh-server-udeb_4.3p2-9_i386.udeb (openssh-client-udeb_4.3p2-9_i386.udeb)
Using ASPEL000 for CD1/pool/main/a/aspell-ar (aspell-ar-large)
Using ASPEL001 for CD1/pool/main/a/aspell-cs (aspell-cy)
Using ASPEL002 for CD1/pool/main/a/aspell-de-alt (aspell-de)
Using ASPEL003 for CD1/pool/main/a/aspell-el (aspell-en)
Using LIBAV000.DEB;1 for CD1/pool/main/a/avahi/libavahi-common-data_0.6.16-3etch1_i386.deb (libavahi-glib1_0.6.16-3etch1_i386.deb)
Using LIBAV001.DEB;1 for CD1/pool/main/a/avahi/libavahi-glib1_0.6.16-3etch1_i386.deb (libavahi-client3_0.6.16-3etch1_i386.deb)
Using LIBAV002.DEB;1 for CD1/pool/main/a/avahi/libavahi-client3_0.6.16-3etch1_i386.deb (libavahi-compat-howl0_0.6.16-3etch1_i386.deb)
Using LIBAV003.DEB;1 for CD1/pool/main/a/avahi/libavahi-compat-howl0_0.6.16-3etch1_i386.deb (libavahi-common3_0.6.16-3etch1_i386.deb)
Using LIBAT000.DEB;1 for CD1/pool/main/a/atk1.0/libatk1.0-data_1.12.4-3_all.deb (libatk1.0-0_1.12.4-3_i386.deb)
Using APACH000.DEB;1 for CD1/pool/main/a/apache2/apache2.2-common_2.2.3-4+etch1_i386.deb (apache2-mpm-prefork_2.2.3-4+etch1_i386.deb)
Using APACH001.DEB;1 for CD1/pool/main/a/apache2/apache2-mpm-prefork_2.2.3-4+etch1_i386.deb (apache2-utils_2.2.3-4+etch1_i386.deb)
Using APTIT000.DEB;1 for CD1/pool/main/a/aptitude/aptitude_0.4.4-4_i386.deb (aptitude-doc-cs_0.4.4-4_all.deb)
Using APTIT001.DEB;1 for CD1/pool/main/a/aptitude/aptitude-doc-cs_0.4.4-4_all.deb (aptitude-doc-en_0.4.4-4_all.deb)
Using LIBHT000 for CD1/pool/main/libh/libhtml-parser-perl (libhtml-tagset-perl)
Using LIBHT001 for CD1/pool/main/libh/libhtml-tagset-perl (libhtml-tree-perl)
Using TASKS000.DEB;1 for CD1/pool/main/t/tasksel/tasksel_2.66_all.deb (tasksel-data_2.66_all.deb)
Using LIBPA000.DEB;1 for CD1/pool/main/libp/libpaper/libpaper-utils_1.1.21_i386.deb (libpaper1_1.1.21_i386.deb)
Using WMAKE000 for CD1/pool/main/w/wmakerconf-data (wmakerconf)
Using LIBTE000 for CD1/pool/main/libt/libtext-wrapi18n-perl (libtext-iconv-perl)
Using LIBTE001 for CD1/pool/main/libt/libtext-iconv-perl (libtext-charwidth-perl)
Using LIBTA000.DEB;1 for CD1/pool/main/libt/libtasn1-3/libtasn1-3_0.3.6-2_i386.deb (libtasn1-3-bin_0.3.6-2_i386.deb)
Using LIBVI000 for CD1/pool/main/libv/libvisual-plugins (libvisual)
Using LIBVO000.DEB;1 for CD1/pool/main/libv/libvorbis/libvorbisfile3_1.1.2.dfsg-1.2_i386.deb (libvorbisenc2_1.1.2.dfsg-1.2_i386.deb)
Using LIBVO001.DEB;1 for CD1/pool/main/libv/libvorbis/libvorbisenc2_1.1.2.dfsg-1.2_i386.deb (libvorbis0a_1.1.2.dfsg-1.2_i386.deb)
Using LIBRS000.DEB;1 for CD1/pool/main/libr/librsvg/librsvg2-common_2.14.4-3_i386.deb (librsvg2-2_2.14.4-3_i386.deb)
Using LIBSD000.DEB;1 for CD1/pool/main/libs/libsdl1.2/libsdl1.2debian_1.2.11-8_i386.deb (libsdl1.2debian-nas_1.2.11-8_i386.deb)
Using LIBSD001.DEB;1 for CD1/pool/main/libs/libsdl1.2/libsdl1.2debian-nas_1.2.11-8_i386.deb (libsdl1.2debian-arts_1.2.11-8_i386.deb)
Using LIBSD002.DEB;1 for CD1/pool/main/libs/libsdl1.2/libsdl1.2debian-arts_1.2.11-8_i386.deb (libsdl1.2debian-esd_1.2.11-8_i386.deb)
Using LIBSD003.DEB;1 for CD1/pool/main/libs/libsdl1.2/libsdl1.2debian-esd_1.2.11-8_i386.deb (libsdl1.2debian-all_1.2.11-8_i386.deb)
Using LIBSD004.DEB;1 for CD1/pool/main/libs/libsdl1.2/libsdl1.2debian-all_1.2.11-8_i386.deb (libsdl1.2debian-oss_1.2.11-8_i386.deb)
Using LIBSD005.DEB;1 for CD1/pool/main/libs/libsdl1.2/libsdl1.2debian-oss_1.2.11-8_i386.deb (libsdl1.2debian-alsa_1.2.11-8_i386.deb)
Using ISPEL000 for CD1/pool/main/i/ispell-fo (ispell-fi)
Using INETU000.DEB;1 for CD1/pool/main/i/inetutils/inetutils-ping_1.5.dfsg.1-2_i386.deb (inetutils-syslogd_1.5.dfsg.1-2_i386.deb)
Using INETU001.DEB;1 for CD1/pool/main/i/inetutils/inetutils-syslogd_1.5.dfsg.1-2_i386.deb (inetutils-inetd_1.5.dfsg.1-2_i386.deb)
Using MYSPE000.DEB;1 for CD1/pool/main/i/igerman98/myspell-de-de_20051113-5_all.deb (myspell-de-ch_20051113-5_all.deb)
Using MYSPE001.DEB;1 for CD1/pool/main/i/igerman98/myspell-de-ch_20051113-5_all.deb (myspell-de-at_20051113-5_all.deb)
Using LIBXX000 for CD1/pool/main/libx/libxxf86dga (libxxf86vm)
Using LIBXX001 for CD1/pool/main/libx/libxxf86vm (libxxf86misc)
Using LIBXM000.DEB;1 for CD1/pool/main/libx/libxml2/libxml2_2.6.27.dfsg-1_i386.deb (libxml2-utils_2.6.27.dfsg-1_i386.deb)
Using CONSO000 for CD1/pool/main/c/console-data (console-common)
Using CONSO001 for CD1/pool/main/c/console-common (console-cyrillic)
Using CONSO002 for CD1/pool/main/c/console-cyrillic (console-tools)
Using CDEBC000 for CD1/pool/main/c/cdebconf-entropy (cdebconf)
Using LIBSA000.DEB;1 for CD1/pool/main/c/cyrus-sasl2/libsasl2-2_2.1.22.dfsg1-8_i386.deb (libsasl2_2.1.22.dfsg1-8_i386.deb)
Using COURI000.DEB;1 for CD1/pool/main/c/courier/courier-base_0.53.3-5_i386.deb (courier-mta_0.53.3-5_i386.deb)
Using COURI000.DEB;1 for CD1/pool/main/c/courier-authlib/courier-authlib-userdb_0.58-4_i386.deb (courier-authdaemon_0.58-4_i386.deb)
Using COURI001.DEB;1 for CD1/pool/main/c/courier-authlib/courier-authdaemon_0.58-4_i386.deb (courier-authlib_0.58-4_i386.deb)
Using CUPSY000.DEB;1 for CD1/pool/main/c/cupsys/cupsys-common_1.2.7-4_all.deb (cupsys-client_1.2.7-4_i386.deb)
Using CONSO000.UDE;1 for CD1/pool/main/c/console-data/console-keymaps-atari_1.01-7_all.udeb (console-keymaps-sun_1.01-7_all.udeb)
Using CONSO001.UDE;1 for CD1/pool/main/c/console-data/console-keymaps-sun_1.01-7_all.udeb (console-keymaps-acorn_1.01-7_all.udeb)
Using CONSO002.UDE;1 for CD1/pool/main/c/console-data/console-keymaps-acorn_1.01-7_all.udeb (console-keymaps-amiga_1.01-7_all.udeb)
Using CONSO003.UDE;1 for CD1/pool/main/c/console-data/console-keymaps-amiga_1.01-7_all.udeb (console-keymaps-mac_1.01-7_all.udeb)
Using CONSO004.UDE;1 for CD1/pool/main/c/console-data/console-keymaps-mac_1.01-7_all.udeb (console-keymaps-dec_1.01-7_all.udeb)
Using CHOOS000.UDE;1 for CD1/pool/main/c/choose-mirror/choose-mirror-bin_2.13etch1_i386.udeb (choose-mirror_2.13etch1_all.udeb)
Using LIBDI000 for CD1/pool/main/libd/libdigest-md4-perl (libdigest-sha1-perl)
Using SELIN000.DEB;1 for CD1/pool/main/r/refpolicy/selinux-policy-refpolicy-targeted_0.0.20061018-5_all.deb (selinux-policy-refpolicy-strict_0.0.20061018-5_all.deb)
Using LIBUN000 for CD1/pool/main/libu/libunicode-map-perl (libunicode-maputf8-perl)
Using LIBUN001 for CD1/pool/main/libu/libunicode-maputf8-perl (libunicode-string-perl)
Using LIBUN002 for CD1/pool/main/libu/libunicode-string-perl (libunicode-map8-perl-dfsg)
Using LIBCA000 for CD1/pool/main/libc/libcairo-perl (libcairo)
Using LIBCA000.DEB;1 for CD1/pool/main/libc/libcairo/libcairo2_1.2.4-4_i386.deb (libcairo-directfb2_1.2.4-4_i386.deb)
Using DISCO000 for CD1/pool/main/d/discover1 (discover-data)
Using DESKT000 for CD1/pool/main/d/desktop-base (desktop-file-utils)
Using DISCO001 for CD1/pool/main/d/discover-data (discover)
Using DEBCO000.DEB;1 for CD1/pool/main/d/debconf/debconf-english_1.5.11_all.deb (debconf-utils_1.5.11_all.deb)
Using DEBCO001.DEB;1 for CD1/pool/main/d/debconf/debconf-utils_1.5.11_all.deb (debconf-i18n_1.5.11_all.deb)
Using DEBCO002.DEB;1 for CD1/pool/main/d/debconf/debconf-i18n_1.5.11_all.deb (debconf_1.5.11_all.deb)
Using DI_UT000.UDE;1 for CD1/pool/main/d/debian-installer-utils/di-utils-mapdevfs_1.45etch1_i386.udeb (di-utils_1.45etch1_i386.udeb)
Using DISCO000.DEB;1 for CD1/pool/main/d/discover-data/discover1-data_2.2007.02.02_all.deb (discover-data_2.2007.02.02_all.deb)
Using SYSVI000.DEB;1 for CD1/pool/main/s/sysvinit/sysvinit_2.86.ds1-38_i386.deb (sysvinit-utils_2.86.ds1-38_i386.deb)
Using WBRIT000.DEB;1 for CD1/pool/main/s/scowl/wbritish-huge_6-2_all.deb (wbritish-small_6-2_all.deb)
Using WCANA000.DEB;1 for CD1/pool/main/s/scowl/wcanadian-large_6-2_all.deb (wcanadian-small_6-2_all.deb)
Using WAMER000.DEB;1 for CD1/pool/main/s/scowl/wamerican-huge_6-2_all.deb (wamerican-large_6-2_all.deb)
Using WCANA001.DEB;1 for CD1/pool/main/s/scowl/wcanadian-small_6-2_all.deb (wcanadian_6-2_all.deb)
Using WAMER001.DEB;1 for CD1/pool/main/s/scowl/wamerican-large_6-2_all.deb (wamerican_6-2_all.deb)
Using WBRIT001.DEB;1 for CD1/pool/main/s/scowl/wbritish-small_6-2_all.deb (wbritish-large_6-2_all.deb)
Using WCANA002.DEB;1 for CD1/pool/main/s/scowl/wcanadian_6-2_all.deb (wcanadian-huge_6-2_all.deb)
Using WAMER002.DEB;1 for CD1/pool/main/s/scowl/wamerican_6-2_all.deb (wamerican-small_6-2_all.deb)
Using WBRIT002.DEB;1 for CD1/pool/main/s/scowl/wbritish-large_6-2_all.deb (wbritish_6-2_all.deb)
Using SENDM000.DEB;1 for CD1/pool/main/s/sendmail/sendmail-bin_8.13.8-3_i386.deb (sendmail-cf_8.13.8-3_all.deb)
Using SENDM001.DEB;1 for CD1/pool/main/s/sendmail/sendmail-cf_8.13.8-3_all.deb (sendmail-base_8.13.8-3_all.deb)
Using SAWFI000.DEB;1 for CD1/pool/main/s/sawfish/sawfish-data_1.3+cvs20061004-1_all.deb (sawfish_1.3+cvs20061004-1_i386.deb)
Using PARTM000 for CD1/pool/main/p/partman-md (partman-crypto)
Using PARTM001 for CD1/pool/main/p/partman-crypto (partman-base)
Using PARTM002 for CD1/pool/main/p/partman-base (partman-lvm)
Using PARTM003 for CD1/pool/main/p/partman-lvm (partman-auto-crypto)
Using PARTM004 for CD1/pool/main/p/partman-auto-crypto (partman-target)
Using PARTM005 for CD1/pool/main/p/partman-target (partman-auto-lvm)
Using PARTM006 for CD1/pool/main/p/partman-auto-lvm (partman-partitioning)
Using PARTM007 for CD1/pool/main/p/partman-partitioning (partman-auto-raid)
Using PARTM008 for CD1/pool/main/p/partman-auto-raid (partman-reiserfs)
Using PARTM009 for CD1/pool/main/p/partman-reiserfs (partman-ext3)
Using PARTM00A for CD1/pool/main/p/partman-ext3 (partman-basicmethods)
Using PARTM00B for CD1/pool/main/p/partman-basicmethods (partman-basicfilesystems)
Using PARTM00C for CD1/pool/main/p/partman-basicfilesystems (partman-efi)
Using PARTM00D for CD1/pool/main/p/partman-efi (partman-jfs)
Using PARTM00E for CD1/pool/main/p/partman-jfs (partman-xfs)
Using PARTM00F for CD1/pool/main/p/partman-xfs (partman-auto)
Using POSTG000.DEB;1 for CD1/pool/main/p/postgresql-common/postgresql-common_71_all.deb (postgresql-client-common_71_all.deb)
Using LIBPA000.DEB;1 for CD1/pool/main/p/pango1.0/libpango1.0-0_1.14.8-5_i386.deb (libpango1.0-common_1.14.8-5_all.deb)
Using PYTHO000.DEB;1 for CD1/pool/main/p/pygtk/python-gtk2_2.8.6-8_i386.deb (python-glade2_2.8.6-8_i386.deb)
Using PYTHO000.DEB;1 for CD1/pool/main/p/python2.4/python2.4_2.4.4-3_i386.deb (python2.4-minimal_2.4.4-3_i386.deb)
Using POSTG000.DEB;1 for CD1/pool/main/p/postgresql-8.1/postgresql-8.1_8.1.9-0etch1_i386.deb (postgresql-client-8.1_8.1.9-0etch1_i386.deb)
Using PULSE000.DEB;1 for CD1/pool/main/p/pulseaudio/pulseaudio-esound-compat_0.9.5-5_i386.deb (pulseaudio-module-hal_0.9.5-5_i386.deb)
Using PULSE001.DEB;1 for CD1/pool/main/p/pulseaudio/pulseaudio-module-hal_0.9.5-5_i386.deb (pulseaudio_0.9.5-5_i386.deb)
Using PULSE002.DEB;1 for CD1/pool/main/p/pulseaudio/pulseaudio_0.9.5-5_i386.deb (pulseaudio-module-x11_0.9.5-5_i386.deb)
Using LIBPT000.DEB;1 for CD1/pool/main/p/pwlib/libpt-plugins-dc_1.10.2-2_i386.deb (libpt-plugins-avc_1.10.2-2_i386.deb)
Using LIBPT001.DEB;1 for CD1/pool/main/p/pwlib/libpt-plugins-avc_1.10.2-2_i386.deb (libpt-plugins-oss_1.10.2-2_i386.deb)
Using LIBPT002.DEB;1 for CD1/pool/main/p/pwlib/libpt-plugins-oss_1.10.2-2_i386.deb (libpt-plugins-alsa_1.10.2-2_i386.deb)
Using LIBPT003.DEB;1 for CD1/pool/main/p/pwlib/libpt-plugins-alsa_1.10.2-2_i386.deb (libpt-plugins-v4l2_1.10.2-2_i386.deb)
Using LIBPT004.DEB;1 for CD1/pool/main/p/pwlib/libpt-plugins-v4l2_1.10.2-2_i386.deb (libpt-plugins-v4l_1.10.2-2_i386.deb)
Using LIBPO000.DEB;1 for CD1/pool/main/p/poppler/libpoppler0c2_0.4.5-5.1_i386.deb (libpoppler0c2-glib_0.4.5-5.1_i386.deb)
Using PARTM000.UDE;1 for CD1/pool/main/p/partman-crypto/partman-crypto_20_i386.udeb (partman-crypto-dm_20_all.udeb)
Using PARTM001.UDE;1 for CD1/pool/main/p/partman-crypto/partman-crypto-dm_20_all.udeb (partman-crypto-loop_20_all.udeb)
Using XSERV000 for CD1/pool/main/x/xserver-xorg-video-newport (xserver-xorg-video-nv)
Using XSERV001 for CD1/pool/main/x/xserver-xorg-video-nv (xserver-xorg-video-glint)
Using XSERV002 for CD1/pool/main/x/xserver-xorg-video-glint (xserver-xorg-input-evdev)
Using XSERV003 for CD1/pool/main/x/xserver-xorg-input-evdev (xserver-xorg-video-mga)
Using XSERV004 for CD1/pool/main/x/xserver-xorg-video-mga (xserver-xorg-input-aiptek)
Using XSERV005 for CD1/pool/main/x/xserver-xorg-input-aiptek (xserver-xorg-video-imstt)
Using XSERV006 for CD1/pool/main/x/xserver-xorg-video-imstt (xserver-xorg-video-nsc)
Using XSERV007 for CD1/pool/main/x/xserver-xorg-video-nsc (xserver-xorg-video-s3virge)
Using XSERV008 for CD1/pool/main/x/xserver-xorg-video-s3virge (xserver-xorg-video-v4l)
Using XSERV009 for CD1/pool/main/x/xserver-xorg-video-v4l (xserver-xorg-input-mouse)
Using XSERV00A for CD1/pool/main/x/xserver-xorg-input-mouse (xserver-xorg-video-chips)
Using XSERV00B for CD1/pool/main/x/xserver-xorg-video-chips (xserver-xorg-video-cyrix)
Using XSERV00C for CD1/pool/main/x/xserver-xorg-video-cyrix (xserver-xorg-video-siliconmotion)
Using XSERV00D for CD1/pool/main/x/xserver-xorg-video-siliconmotion (xserver-xorg-input-keyboard)
Using XSERV00E for CD1/pool/main/x/xserver-xorg-input-keyboard (xserver-xorg-video-fbdev)
Using XSERV00F for CD1/pool/main/x/xserver-xorg-video-fbdev (xserver-xorg-video-i740)
Using XSERV00G for CD1/pool/main/x/xserver-xorg-video-i740 (xserver-xorg-video-cirrus)
Using XSERV00H for CD1/pool/main/x/xserver-xorg-video-cirrus (xserver-xorg-video-vesa)
Using XSERV00I for CD1/pool/main/x/xserver-xorg-video-vesa (xserver-xorg-video-voodoo)
Using XSERV00J for CD1/pool/main/x/xserver-xorg-video-voodoo (xserver-xorg-input-digitaledge)
Using XSERV00K for CD1/pool/main/x/xserver-xorg-input-digitaledge (xserver-xorg-video-rendition)
Using XSERV00L for CD1/pool/main/x/xserver-xorg-video-rendition (xserver-xorg-input-acecad)
Using XSERV00M for CD1/pool/main/x/xserver-xorg-input-acecad (xserver-xorg-video-s3)
Using XSERV00N for CD1/pool/main/x/xserver-xorg-video-s3 (xserver-xorg-input-dynapro)
Using XSERV00O for CD1/pool/main/x/xserver-xorg-input-dynapro (xserver-xorg-video-i128)
Using XSERV00P for CD1/pool/main/x/xserver-xorg-video-i128 (xserver-xorg-input-elographics)
Using XSERV00Q for CD1/pool/main/x/xserver-xorg-input-elographics (xserver-xorg-video-ati)
Using XSERV00R for CD1/pool/main/x/xserver-xorg-video-ati (xserver-xorg-video-tseng)
Using XSERV00S for CD1/pool/main/x/xserver-xorg-video-tseng (xserver-xorg-video-i810)
Using XSERV00T for CD1/pool/main/x/xserver-xorg-video-i810 (xserver-xorg-video-sis)
Using XSERV00U for CD1/pool/main/x/xserver-xorg-video-sis (xserver-xorg-video-tdfx)
Using XSERV00V for CD1/pool/main/x/xserver-xorg-video-tdfx (xserver-xorg-video-savage)
Using XSERV00W for CD1/pool/main/x/xserver-xorg-video-savage (xserver-xorg-video-sisusb)
Using XSERV00X for CD1/pool/main/x/xserver-xorg-video-sisusb (xserver-xorg-video-tga)
Using XSERV00Y for CD1/pool/main/x/xserver-xorg-video-tga (xserver-xorg-input-elo2300)
Using XSERV00Z for CD1/pool/main/x/xserver-xorg-input-elo2300 (xserver-xorg-video-dummy)
Using XSERV010 for CD1/pool/main/x/xserver-xorg-video-dummy (xserver-xorg-video-ark)
Using XSERV011 for CD1/pool/main/x/xserver-xorg-video-ark (xserver-xorg-video-neomagic)
Using XSERV012 for CD1/pool/main/x/xserver-xorg-video-neomagic (xserver-xorg-video-apm)
Using XSERV013 for CD1/pool/main/x/xserver-xorg-video-apm (xserver-xorg-video-vga)
Using XSERV014 for CD1/pool/main/x/xserver-xorg-video-vga (xserver-xorg-input-dmc)
Using XSERV015 for CD1/pool/main/x/xserver-xorg-input-dmc (xserver-xorg-input-citron)
Using XSERV016 for CD1/pool/main/x/xserver-xorg-input-citron (xserver-xorg-video-via)
Using XSERV017 for CD1/pool/main/x/xserver-xorg-video-via (xserver-xorg-video-vmware)
Using XSERV018 for CD1/pool/main/x/xserver-xorg-video-vmware (xserver-xorg-input-calcomp)
Using XSERV019 for CD1/pool/main/x/xserver-xorg-input-calcomp (xserver-xorg-video-trident)
Using XSERV000.DEB;1 for CD1/pool/main/x/xorg/xserver-xorg_7.1.0-19_all.deb (xserver-xorg-video-all_7.1.0-19_i386.deb)
Using XSERV001.DEB;1 for CD1/pool/main/x/xorg/xserver-xorg-video-all_7.1.0-19_i386.deb (xserver-xorg-input-all_7.1.0-19_i386.deb)
Using XSERV002.DEB;1 for CD1/pool/main/x/xorg/xserver-xorg-input-all_7.1.0-19_i386.deb (xserver-xfree86_7.1.0-19_all.deb)
Using NETWO000 for CD1/pool/main/n/network-manager (network-console)
Using NAUTI000 for CD1/pool/main/n/nautilus (nautilus-cd-burner)
Using NAUTI000.DEB;1 for CD1/pool/main/n/nautilus/nautilus_2.14.3-11+b1_i386.deb (nautilus-data_2.14.3-11_all.deb)
Using NCURS000.DEB;1 for CD1/pool/main/n/ncurses/ncurses-base_5.5-5_all.deb (ncurses-term_5.5-5_all.deb)
Using LIBNC000.DEB;1 for CD1/pool/main/n/ncurses/libncursesw5_5.5-5_i386.deb (libncurses5_5.5-5_i386.deb)
Using NCURS001.DEB;1 for CD1/pool/main/n/ncurses/ncurses-term_5.5-5_all.deb (ncurses-bin_5.5-5_i386.deb)
Using MANPA000 for CD1/pool/main/m/manpages (manpages-ja)
Using MANPA001 for CD1/pool/main/m/manpages-ja (manpages-fr)
Using MANPA002 for CD1/pool/main/m/manpages-fr (manpages-pl)
Using MANPA003 for CD1/pool/main/m/manpages-pl (manpages-de)
Using MANPA004 for CD1/pool/main/m/manpages-de (manpages-ko)
Using MANPA005 for CD1/pool/main/m/manpages-ko (manpages-tr)
Using MANPA006 for CD1/pool/main/m/manpages-tr (manpages-es)
Using MANPA007 for CD1/pool/main/m/manpages-es (manpages-ru)
Using MANPA008 for CD1/pool/main/m/manpages-ru (manpages-fr-extra)
Using MANPA009 for CD1/pool/main/m/manpages-fr-extra (manpages-pt)
Using MEW_B000.DEB;1 for CD1/pool/main/m/mew-beta/mew-beta_5.1.52~0.20061031-1_all.deb (mew-beta-bin_5.1.52~0.20061031-1_i386.deb)
Using METAC000.DEB;1 for CD1/pool/main/m/metacity/metacity_2.14.5-4_i386.deb (metacity-common_2.14.5-4_all.deb)
Using MANPA000.DEB;1 for CD1/pool/main/m/manpages-fr/manpages-fr_2.39.1-5_all.deb (manpages-fr-dev_2.39.1-5_all.deb)
Using LIBGL000.DEB;1 for CD1/pool/main/m/mesa/libgl1-mesa-glx_6.5.1-0.6_i386.deb (libgl1-mesa-dri_6.5.1-0.6_i386.deb)
Using LINUX000.DEB;1 for CD1/pool/main/l/linux-latest-2.6/linux-image-2.6-686_2.6.18+6etch1_i386.deb (linux-image-2.6-486_2.6.18+6etch1_i386.deb)
Using LINUX001.DEB;1 for CD1/pool/main/l/linux-latest-2.6/linux-headers-2.6-486_2.6.18+6etch1_i386.deb (linux-headers-2.6-686_2.6.18+6etch1_i386.deb)
Using LINUX000.DEB;1 for CD1/pool/main/l/linux-2.6/linux-headers-2.6.18-5-686_2.6.18.dfsg.1-13_i386.deb (linux-headers-2.6.18-5-486_2.6.18.dfsg.1-13_i386.deb)
Using LINUX001.DEB;1 for CD1/pool/main/l/linux-2.6/linux-headers-2.6.18-5-486_2.6.18.dfsg.1-13_i386.deb (linux-headers-2.6.18-5_2.6.18.dfsg.1-13_i386.deb)
Using LINUX002.DEB;1 for CD1/pool/main/l/linux-2.6/linux-image-2.6.18-5-686_2.6.18.dfsg.1-13_i386.deb (linux-image-2.6.18-5-486_2.6.18.dfsg.1-13_i386.deb)
Using LIBGN000 for CD1/pool/main/libg/libgnome2-vfs-perl (libgnomeprint)
Using LIBGN001 for CD1/pool/main/libg/libgnomeprint (libgnomecups)
Using LIBGN002 for CD1/pool/main/libg/libgnomecups (libgnome)
Using LIBGN003 for CD1/pool/main/libg/libgnome (libgnomeprintui)
Using LIBGN004 for CD1/pool/main/libg/libgnomeprintui (libgnome2-canvas-perl)
Using LIBGN005 for CD1/pool/main/libg/libgnome2-canvas-perl (libgnome2-perl)
Using LIBGN006 for CD1/pool/main/libg/libgnome2-perl (libgnomeui)
Using LIBGN007 for CD1/pool/main/libg/libgnomeui (libgnomecanvas)
Using LIBGI000.DEB;1 for CD1/pool/main/libg/libgii/libgii1_1.0.1-3_i386.deb (libgii1-target-x_1.0.1-3_i386.deb)
Using LIBGG000.DEB;1 for CD1/pool/main/libg/libggi/libggi-target-fbdev_2.2.1-5_i386.deb (libggi-target-aa_2.2.1-5_i386.deb)
Using LIBGG001.DEB;1 for CD1/pool/main/libg/libggi/libggi-target-aa_2.2.1-5_i386.deb (libggi-target-glide_2.2.1-5_i386.deb)
Using LIBGG002.DEB;1 for CD1/pool/main/libg/libggi/libggi-target-glide_2.2.1-5_i386.deb (libggi-target-svgalib_2.2.1-5_i386.deb)
Using LIBGG003.DEB;1 for CD1/pool/main/libg/libggi/libggi-target-svgalib_2.2.1-5_i386.deb (libggi-target-terminfo_2.2.1-5_i386.deb)
Using LIBGG004.DEB;1 for CD1/pool/main/libg/libggi/libggi-target-terminfo_2.2.1-5_i386.deb (libggi-target-x_2.2.1-5_i386.deb)
Using LIBGG005.DEB;1 for CD1/pool/main/libg/libggi/libggi-target-x_2.2.1-5_i386.deb (libggi-target-vcsa_2.2.1-5_i386.deb)
Using LIBGN000.DEB;1 for CD1/pool/main/libg/libgnomecanvas/libgnomecanvas2-0_2.14.0-2_i386.deb (libgnomecanvas2-common_2.14.0-2_all.deb)
Using LIBGN000.DEB;1 for CD1/pool/main/libg/libgnomeui/libgnomeui-common_2.14.1-2_all.deb (libgnomeui-0_2.14.1-2_i386.deb)
Using LIBGP000.DEB;1 for CD1/pool/main/libg/libgphoto2/libgphoto2-2_2.2.1-16_i386.deb (libgphoto2-port0_2.2.1-16_i386.deb)
Using LIBGN000.DEB;1 for CD1/pool/main/libg/libgnomeprintui/libgnomeprintui2.2-0_2.12.1-4_i386.deb (libgnomeprintui2.2-common_2.12.1-4_all.deb)
Using LIBGT000.DEB;1 for CD1/pool/main/libg/libgtop2/libgtop2-common_2.14.4-3_all.deb (libgtop2-7_2.14.4-3_i386.deb)
Using LIBGN000.DEB;1 for CD1/pool/main/libg/libgnome/libgnome2-0_2.16.0-2_i386.deb (libgnome2-common_2.16.0-2_all.deb)
Using LIBGS000.DEB;1 for CD1/pool/main/libg/libgsf/libgsf-1-common_1.14.3-1_all.deb (libgsf-1-114_1.14.3-1_i386.deb)
Using LIBGN000.DEB;1 for CD1/pool/main/libg/libgnomeprint/libgnomeprint2.2-0_2.12.1-7_i386.deb (libgnomeprint2.2-data_2.12.1-7_all.deb)
Using FESTL000 for CD1/pool/main/f/festlex-cmu (festlex-poslex)
Using FREET000 for CD1/pool/main/f/freetype (freetype1)
Using FONTC000.DEB;1 for CD1/pool/main/f/fontconfig/fontconfig_2.4.2-1.2_i386.deb (fontconfig-config_2.4.2-1.2_all.deb)
Using UTIL_000.DEB;1 for CD1/pool/main/u/util-linux/util-linux-locales_2.12r-19_all.deb (util-linux_2.12r-19_i386.deb)
Using EPIPH000 for CD1/pool/main/e/epiphany-browser (epiphany-extensions)
Using EVOLU000 for CD1/pool/main/e/evolution-webcal (evolution-exchange)
Using EVOLU001 for CD1/pool/main/e/evolution-exchange (evolution)
Using EVOLU002 for CD1/pool/main/e/evolution (evolution-data-server)
Using LIBED000.DEB;1 for CD1/pool/main/e/evolution-data-server/libedataserver1.2-7_1.6.3-5_i386.deb (libedata-cal1.2-5_1.6.3-5_i386.deb)
Using LIBED001.DEB;1 for CD1/pool/main/e/evolution-data-server/libedata-cal1.2-5_1.6.3-5_i386.deb (libedata-book1.2-2_1.6.3-5_i386.deb)
Using LIBED002.DEB;1 for CD1/pool/main/e/evolution-data-server/libedata-book1.2-2_1.6.3-5_i386.deb (libedataserverui1.2-6_1.6.3-5_i386.deb)
Using EVOLU000.DEB;1 for CD1/pool/main/e/evolution-data-server/evolution-data-server-common_1.6.3-5_all.deb (evolution-data-server_1.6.3-5_i386.deb)
Using EVOLU000.DEB;1 for CD1/pool/main/e/evolution/evolution-plugins_2.6.3-6_i386.deb (evolution-common_2.6.3-6_all.deb)
Using EVOLU001.DEB;1 for CD1/pool/main/e/evolution/evolution-common_2.6.3-6_all.deb (evolution_2.6.3-6_i386.deb)
Using EMACS000.DEB;1 for CD1/pool/main/e/emacs21/emacs21-bin-common_21.4a+1-3etch1_i386.deb (emacs21-nox_21.4a+1-3etch1_i386.deb)
Using EMACS001.DEB;1 for CD1/pool/main/e/emacs21/emacs21-nox_21.4a+1-3etch1_i386.deb (emacs21_21.4a+1-3etch1_i386.deb)
Using EMACS002.DEB;1 for CD1/pool/main/e/emacs21/emacs21_21.4a+1-3etch1_i386.deb (emacs21-common_21.4a+1-3etch1_all.deb)
Using LIBEE000.DEB;1 for CD1/pool/main/e/eel2/libeel2-data_2.14.3-5_all.deb (libeel2-2.14_2.14.3-5_i386.deb)
Using EXIM4000.DEB;1 for CD1/pool/main/e/exim4/exim4-daemon-light_4.63-17_i386.deb (exim4-daemon-heavy_4.63-17_i386.deb)
Size of boot image is 4 sectors -> No emulation
1.51% done, estimate finish Thu Nov 22 22:16:33 2007
3.02% done, estimate finish Thu Nov 22 22:16:33 2007
4.53% done, estimate finish Thu Nov 22 22:16:33 2007
6.04% done, estimate finish Thu Nov 22 22:16:33 2007
7.55% done, estimate finish Thu Nov 22 22:16:33 2007
9.06% done, estimate finish Thu Nov 22 22:16:33 2007
10.57% done, estimate finish Thu Nov 22 22:16:33 2007
12.08% done, estimate finish Thu Nov 22 22:16:33 2007
13.59% done, estimate finish Thu Nov 22 22:16:33 2007
15.10% done, estimate finish Thu Nov 22 22:16:33 2007
16.60% done, estimate finish Thu Nov 22 22:16:39 2007
18.12% done, estimate finish Thu Nov 22 22:16:38 2007
19.63% done, estimate finish Thu Nov 22 22:16:38 2007
21.13% done, estimate finish Thu Nov 22 22:16:37 2007
22.64% done, estimate finish Thu Nov 22 22:16:37 2007
24.15% done, estimate finish Thu Nov 22 22:16:37 2007
25.66% done, estimate finish Thu Nov 22 22:16:36 2007
27.17% done, estimate finish Thu Nov 22 22:16:36 2007
28.68% done, estimate finish Thu Nov 22 22:16:36 2007
30.19% done, estimate finish Thu Nov 22 22:16:36 2007
31.70% done, estimate finish Thu Nov 22 22:16:36 2007
33.21% done, estimate finish Thu Nov 22 22:16:36 2007
34.72% done, estimate finish Thu Nov 22 22:16:35 2007
36.23% done, estimate finish Thu Nov 22 22:16:35 2007
37.74% done, estimate finish Thu Nov 22 22:16:35 2007
39.24% done, estimate finish Thu Nov 22 22:16:35 2007
40.75% done, estimate finish Thu Nov 22 22:16:35 2007
42.26% done, estimate finish Thu Nov 22 22:16:37 2007
43.77% done, estimate finish Thu Nov 22 22:16:37 2007
45.28% done, estimate finish Thu Nov 22 22:16:37 2007
46.80% done, estimate finish Thu Nov 22 22:16:37 2007
48.30% done, estimate finish Thu Nov 22 22:16:37 2007
49.81% done, estimate finish Thu Nov 22 22:16:37 2007
51.32% done, estimate finish Thu Nov 22 22:16:36 2007
52.83% done, estimate finish Thu Nov 22 22:16:36 2007
54.34% done, estimate finish Thu Nov 22 22:16:36 2007
55.85% done, estimate finish Thu Nov 22 22:16:36 2007
57.36% done, estimate finish Thu Nov 22 22:16:36 2007
58.87% done, estimate finish Thu Nov 22 22:16:36 2007
60.38% done, estimate finish Thu Nov 22 22:16:37 2007
61.89% done, estimate finish Thu Nov 22 22:16:37 2007
63.40% done, estimate finish Thu Nov 22 22:16:37 2007
64.91% done, estimate finish Thu Nov 22 22:16:37 2007
66.42% done, estimate finish Thu Nov 22 22:16:37 2007
67.93% done, estimate finish Thu Nov 22 22:16:37 2007
69.43% done, estimate finish Thu Nov 22 22:16:37 2007
70.94% done, estimate finish Thu Nov 22 22:16:37 2007
72.45% done, estimate finish Thu Nov 22 22:16:37 2007
73.96% done, estimate finish Thu Nov 22 22:16:37 2007
75.47% done, estimate finish Thu Nov 22 22:16:36 2007
76.98% done, estimate finish Thu Nov 22 22:16:36 2007
78.49% done, estimate finish Thu Nov 22 22:16:36 2007
80.00% done, estimate finish Thu Nov 22 22:16:36 2007
81.51% done, estimate finish Thu Nov 22 22:16:36 2007
83.02% done, estimate finish Thu Nov 22 22:16:36 2007
84.53% done, estimate finish Thu Nov 22 22:16:37 2007
86.03% done, estimate finish Thu Nov 22 22:16:37 2007
87.55% done, estimate finish Thu Nov 22 22:16:37 2007
89.06% done, estimate finish Thu Nov 22 22:16:37 2007
90.56% done, estimate finish Thu Nov 22 22:16:37 2007
92.07% done, estimate finish Thu Nov 22 22:16:37 2007
93.59% done, estimate finish Thu Nov 22 22:16:37 2007
95.09% done, estimate finish Thu Nov 22 22:16:37 2007
96.60% done, estimate finish Thu Nov 22 22:16:37 2007
98.11% done, estimate finish Thu Nov 22 22:16:37 2007
99.62% done, estimate finish Thu Nov 22 22:16:37 2007
Total translation table size: 2048
Total rockridge attributes bytes: 449047
Total directory bytes: 2078720
Path table size(bytes): 13224
Max brk space used 352000
331261 extents written (646 MB)
wesnoth:/home/debian-cd# cat CONF.sh
# This file will have to be sourced where needed
#
# Unset all optional variables first to start from a clean state
unset NONFREE || true
unset CONTRIB || true
unset EXTRANONFREE || true
unset LOCAL || true
unset LOCALDEBS || true
unset SECURITY || true
unset BOOTDIR || true
unset SYMLINK || true
unset COPYLINK || true
unset MKISOFS || true
unset MKISOFS_OPTS || true
unset ISOLINUX || true
unset EXCLUDE || true
unset NORECOMMENDS || true
unset NOSUGGESTS || true
unset DOJIGDO || true
unset JIGDOTEMPLATEURL || true
unset JIGDOFALLBACKURLS || true
unset JIGDOINCLUDEURLS || true
unset JIGDOSCRIPT || true
unset JIGDO_OPTS || true
unset PUBLISH_URL || true
unset PUBLISH_PATH || true
unset UDEB_INCLUDE || true
unset UDEB_EXCLUDE || true
unset BASE_INCLUDE || true
unset BASE_EXCLUDE || true
unset INSTALLER_CD || true
unset MAXCDS || true
unset SPLASHPNG || true
unset OMIT_MANUAL || true
unset OMIT_RELEASE_NOTES || true
# The debian-cd dir
# Where I am (hoping I'm in the debian-cd dir)
export BASEDIR=`pwd`
# Building etch cd set ...
export CODENAME=etch
# export CODENAME=deltad
# By default use Debian installer packages from $CODENAME
if [ -z "$DI_CODENAME" ]; then
export DI_CODENAME=$CODENAME
fi
# If set, controls where the d-i components are downloaded from.
# This may be an url, or "default", which will make it use the default url
# for the daily d-i builds. If not set, uses the official d-i images from
# the Debian mirror.
#export DI_WWW_HOME=default
# Version number, "2.2 r0", "2.2 r1" etc.
# export DEBVERSION="0.2"
export DEBVERSION="4.0"
# Official or non-official set.
# NOTE: THE "OFFICIAL" DESIGNATION IS ONLY ALLOWED FOR IMAGES AVAILABLE
# ON THE OFFICIAL DEBIAN CD WEBSITE http://cdimage.debian.org
export OFFICIAL="Unofficial"
#export OFFICIAL="Official"
#export OFFICIAL="Official Beta"
# ... for arch
if [ -z "$ARCHES" ]; then
CPU=`dpkg-architecture -qDEB_HOST_DPKG_CPU 2>/dev/null || true`
if [ -z "$CPU" ]; then
CPU=`dpkg-architecture -qDEB_HOST_ARCH`
fi
KERNEL=`dpkg-architecture -qDEB_HOST_DPKG_OS 2>/dev/null || true`
if [ -z "$KERNEL" ]; then
KERNEL=linux
fi
if [ $KERNEL = linux ] ; then
ARCHES=$CPU
else
ARCHES="$KERNEL-$CPU"
fi
export ARCHES
fi
# IMPORTANT : The 4 following paths must be on the same partition/device.
# If they aren't then you must set COPYLINK below to 1. This
# takes a lot of extra room to create the sandbox for the ISO
# images, however. Also, if you are using an NFS partition for
# some part of this, you must use this option.
# Paths to the mirrors
# export MIRROR=/home/kgoetz/Desktop/StorageDrive/HoldingNotForPng/gNewSense/gNewSenseMirror
export MIRROR=/home/kgoetz/Desktop/ToPng/Debian/DebianMirror/
# Path of the temporary directory
export TDIR=/home/Debiancd/tmp
# Path where the images will be written
export OUT=/home/Debiancd/debian-cd-test
# Where we keep the temporary apt stuff.
# This cannot reside on an NFS mount.
export APTTMP=/home/Debiancd/apttmp
# Do I want to have CONTRIB merged in the CD set
export CONTRIB=0
# If you have a $MIRROR/dists/$CODENAME/local/binary-$ARCH dir with
# local packages that you want to put on the CD set then
# uncomment the following line
# export LOCAL=1
# If your local packages are not under $MIRROR, but somewhere else,
# you can uncomment this line and edit to to point to a directory
# containing dists/$CODENAME/local/binary-$ARCH
# export LOCALDEBS=/home/joey/debian/va/debian
# Where to find the security patches. This directory should be the
# top directory of a security.debian.org mirror.
#export SECURITY="$TOPDIR"/debian/debian-security
# export SECURITY=/home/kgoetz/Desktop/StorageDrive/HoldingNotForPng/gNewSense/gNewSenseMirror/
# Sparc only : bootdir (location of cd.b and second.b)
# export BOOTDIR=/boot
# Symlink farmers should uncomment this line :
# export SYMLINK=1
# Use this to force copying the files instead of symlinking or hardlinking
# them. This is useful if your destination directories are on a different
# partition than your source files.
# export COPYLINK=1
# Options
# export MKISOFS=mkisofs
export MKISOFS_OPTS="-r" #For normal users
# export MKISOFS_OPTS="-r -F ." #For symlink farmers
# ISOLinux support for multiboot on CD1 for i386
export ISOLINUX=1
# uncomment this to if you want to see more of what the Makefile is doing
# export VERBOSE_MAKE=1
export VERBOSE_MAKE=0
# uncoment this to make build_all.sh try to build a simple CD image if
# the proper official CD run does not work
ATTEMPT_FALLBACK=yes
# Set your disk type here. Known types are:
# BC (businesscard): 650 MiB max (should be limited elsewhere,
# should never fill a CD anyway)
# NETINST: 650 MiB max (ditto)
# CD: standard 74-min CD (650 MiB)
# CD700: (semi-)standard 80-min CD (700 MiB)
# DVD: standard 4.7 GB DVD
# CUSTOM: up to you - specify a size to go with it (in 2K blocks)
export DISKTYPE=CD
#export DISKTYPE=CUSTOM
#export CUSTOMSIZE=XXXX
# We don't want certain packages to take up space on CD1...
#export EXCLUDE1="$BASEDIR"/tasks/exclude-$CODENAME
# ...but they are okay for other CDs (UNEXCLUDEx == may be included
# on CD x if not already covered)
#export UNEXCLUDE2="$BASEDIR"/tasks/unexclude-CD2-$CODENAME
# Any packages listed in EXCLUDE but not in any UNEXCLUDE will be
# excluded completely.
# Set this if the recommended packages should be skipped when adding
# package on the CD. The default is 'false'.
export NORECOMMENDS=0
# Set this if the suggested packages should be skipped when adding
# package on the CD. The default is 'true'.
export NOSUGGESTS=1
# Produce jigdo files:
# 0/unset = Don't do jigdo at all, produce only the full iso image.
# 1 = Produce both the iso image and jigdo stuff.
# 2 = Produce only the jigdo stuff
export DOJIGDO=0
# HTTP/FTP URL for directory where you intend to make the templates
# available. You should not need to change this; the default value ""
# means "template in same dir as the .jigdo file", which is usually
# correct. If it is non-empty, it needs a trailing slash. "%ARCH%"
# will be substituted by the current architecture.
#export JIGDOTEMPLATEURL=""
#
# Name of a directory on disc to create data for a fallback server in.
# Should later be made available by you at the URL given in
# JIGDOFALLBACKURLS. In the directory, two subdirs named "Debian" and
# "Non-US" will be created, and filled with hard links to the actual
# files in your FTP archive. Because of the hard links, the dir must
# be on the same partition as the FTP archive! If unset, no fallback
# data is created, which may cause problems - see README.
#export JIGDOFALLBACKPATH="$(OUT)/snapshot/"
#
# Space-separated list of label->URL mappings for "jigdo fallback
# server(s)" to add to .jigdo file. If unset, no fallback URL is
# added, which may cause problems - see README.
#export JIGDOFALLBACKURLS="Debian=http://myserver/snapshot/Debian/ Non-US=http://myserver/snapshot/Non-US/"
#
# Space-separated list of "include URLs" to add to the .jigdo file.
# The included files are used to provide an up-to-date list of Debian
# mirrors to the jigdo _GUI_application_ (_jigdo-lite_ doesn't support
# "[Include ...]").
export JIGDOINCLUDEURLS="http://gnewsense.maincontent.net/jigdo"
#
# $JIGDOTEMPLATEURL and $JIGDOINCLUDEURLS are passed to
# "tools/jigdo_header", which is used by default to generate the
# [Image] and [Servers] sections of the .jigdo file. You can provide
# your own script if you need the .jigdo file to contain different
# data.
#export JIGDOSCRIPT="myscript"
# A couple of things used only by publish_cds, so it can tweak the
# jigdo files, and knows where to put the results.
# You need to run publish_cds manually, it is not run by the Makefile.
export PUBLISH_URL="http://gnewsense.maincontent.net/jigdo"
export PUBLISH_PATH="/home/Debiancd/"
# Specify files and directories to *exclude* from jigdo processing. These
# files on each CD are expected to be different to those on the mirror, or
# are often subject to change. Any files matching entries in this list will
# simply be placed straight into the template file.
export JIGDO_EXCLUDE="'README*' /doc/ /md5sum.txt /.disk/ /pics/ 'Release*' 'Packages*' 'Sources*'"
# Specify files that MUST match entries in the externally-supplied
# md5-list. If they do not, the CD build process will fail; something
# must have been corrupted. Replaces the old mirrorcheck code.
export JIGDO_INCLUDE="/pool/"
# Specify the minimum file size to consider for jigdo processing. Any files
# smaller than this will simply be placed straight into the template file.
export JIGDO_OPTS="-jigdo-min-file-size 0"
for EXCL in $JIGDO_EXCLUDE; do
JIGDO_OPTS="$JIGDO_OPTS -jigdo-exclude $EXCL"
done
for INCL in $JIGDO_INCLUDE; do
JIGDO_OPTS="$JIGDO_OPTS -jigdo-force-md5 $INCL"
done
# File with list of packages to include when fetching modules for the
# first stage installer (debian-installer). One package per line.
# Lines starting with '#' are comments. The package order is
# important, as the packages will be installed in the given order.
#export UDEB_INCLUDE="$BASEDIR"/data/$CODENAME/udeb_include
# File with list of packages to exclude as above.
#export UDEB_EXCLUDE="$BASEDIR"/data/$CODENAME/udeb_exclude
# File with list of packages to include when running debootstrap from
# the first stage installer (currently only supported in
# debian-installer). One package per line. Lines starting with '#'
# are comments. The package order is important, as the packages will
# be installed in the given order.
#export BASE_INCLUDE="$BASEDIR"/data/$CODENAME/base_include
# File with list of packages to exclude as above.
#export BASE_EXCLUDE="$BASEDIR"/data/$CODENAME/base_exclude
# Only put the installer onto the cd (set NORECOMMENDS,... as well).
# INSTALLER_CD=0: nothing special (default)
# INSTALLER_CD=1: just add debian-installer (use TASK=tasks/debian-installer-$CODENAME)
# INSTALLER_CD=2: add d-i and base (use TASK=tasks/debian-installer+kernel-$CODENAME)
#export INSTALLER_CD=2
# Parameters to pass to kernel (or d-i) when the CD boots. Not currently
# supported for all architectures.
#export KERNEL_PARAMS="DEBCONF_PRIORITY=critical"
# If set, limits the number of binary CDs to produce.
# export MAXCDS=4
export MAXCDS=1
# If set, overrides the boot picture used.
#export SPLASHPNG="$BASEDIR/data/$CODENAME/splash-img.png"
# Set to 1 to save space by omitting the installation manual.
# If so the README will link to the manual on the web site.
#export OMIT_MANUAL=1
# Set to 1 to save space by omitting the release notes
# If so we will link to them on the web site.
export OMIT_RELEASE_NOTES=1
# Set this to override the default location
#export RELEASE_NOTES_LOCATION="http://www.debian.org/releases/$CODENAME"
case "$OFFICIAL" in
"Official")
export OFFICIAL_VAL=2
;;
"Official Beta")
export OFFICIAL_VAL=1
;;
*)
export OFFICIAL_VAL=0
;;
esac
##################################
# LOCAL HOOK DEFINITIONS
##################################
#
# Set these to point to scripts/programs to be called at various
# points in the debian-cd image-making process. This is the ideal place
# to customise what's on the CDs, for example to add extra files or
# modify existing ones. Each will be called with the arguments in order:
#
# $TDIR (the temporary dir containing the build tree)
# $MIRROR (the location of the mirror)
# $DISKNUM (the image number in the set)
# $CDDIR (the root of the temp disc tree)
# $ARCHES (the set of architectures chosen)
#
# BE CAREFUL about what you do at each point: in the first couple of
# cases, files and directories you're looking to use may not exist yet,
# you may need to worry about adding entries into md5sum.txt yourself
# and (in the last couple of cases) if you add any extra files you may
# end up over-filling the disc. If you *do* need to add files at the end
# of the process, see RESERVED_BLOCKS_HOOK below. It's strongly
# recommended to do this kind of customisation up-front if you can, it's
# much simpler that way!
# The disc_start hook. This will be called near the beginning of the
# start_new_disc script, just after the directory tree has been created
# but before any files have been added
#export DISC_START_HOOK=/bin/true
# The disc_pkg hook. This will be called just after the
# start_new_disc script has finished, just before make_disc_trees.pl
# starts to add package files.
#export DISC_PKG_HOOK=/bin/true
# The reserved_blocks hook; if set, this script should print the
# number of 2K blocks that need to be reserved for data to be added
# *after* a disc tree is filled with packages.
#export RESERVED_BLOCKS_HOOK=/bin/true
# The disc_finish hook. This will be called once a disc image is full,
# just after the last package rollback but before the last bits of
# cleanup are done on the temp disc tree
#export DISC_FINISH_HOOK=/bin/true
# The disc_end hook. This will be called *right* at the end of the
# image-making process in make_disc_trees.pl.
#export DISC_END_HOOK=/bin/true
wesnoth:/home/debian-cd#
Script done on Thu 22 Nov 2007 22:21:43 CST