rendered paste bodyfree1@free1-laptop:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001be90000 (usable)
[ 0.000000] BIOS-e820: 000000001be90000 - 000000001be97000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001be97000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7130
[ 0.000000] Entering add_active_range(0, 0, 114320) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114320
[ 0.000000] HighMem 114320 -> 114320
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114320
[ 0.000000] On node 0 totalpages: 114320
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 861 pages used for memmap
[ 0.000000] Normal zone: 109363 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7070 checksum 0
[ 0.000000] ACPI: RSDP 000F7070, 0014 (r0 TOSQCI)
[ 0.000000] ACPI: RSDT 1BE90821, 003C (r1 TOSQCI TOSQCI00 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1BE96D8A, 0074 (r1 ATI Bonefish 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 1BE90F8E, 5DFC (r1 TOSQCI L10 6040000 MSFT 2000002)
[ 0.000000] ACPI: FACS 1BE97FC0, 0040
[ 0.000000] ACPI: APIC 1BE96DFE, 0050 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 1BE96E4E, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: SLIC 1BE96E8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 1BE90D92, 01FC (r1 PmRef Cpu0Cst 3001 INTL 20050228)
[ 0.000000] ACPI: SSDT 1BE9085D, 0535 (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:c4000000)
[ 0.000000] Built 1 zonelists. Total pages: 113427
[ 0.000000] Kernel command line: root=UUID=afd91a2f-4f11-4cb8-89a5-1878bdad12b2 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1866.750 MHz processor.
[ 21.560972] Console: colour VGA+ 80x25
[ 21.561432] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.561742] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.575135] Memory: 441732k/457280k available (2015k kernel code, 14980k reserved, 916k data, 364k init, 0k highmem)
[ 21.575144] virtual kernel memory layout:
[ 21.575145] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 21.575146] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.575148] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 21.575149] lowmem : 0xc0000000 - 0xdbe90000 ( 446 MB)
[ 21.575150] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 21.575151] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 21.575152] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 21.575156] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.575200] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 21.655152] Calibrating delay using timer specific routine.. 3738.79 BogoMIPS (lpj=7477582)
[ 21.655182] Security Framework v1.0.0 initialized
[ 21.655191] SELinux: Disabled at boot.
[ 21.655207] Mount-cache hash table entries: 512
[ 21.655363] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 0000c109 00000000 00000000
[ 21.655372] monitor/mwait feature present.
[ 21.655374] using mwait in idle threads.
[ 21.655378] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 21.655380] CPU: L2 cache: 1024K
[ 21.655384] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002940 0000c109 00000000 00000000
[ 21.655394] Compat vDSO mapped to ffffe000.
[ 21.655406] Checking 'hlt' instruction... OK.
[ 21.671242] SMP alternatives: switching to UP code
[ 21.671421] Freeing SMP alternatives: 11k freed
[ 21.671684] Early unpacking initramfs... done
[ 21.985921] ACPI: Core revision 20070126
[ 21.986005] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 22.639781] CPU0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz stepping 0c
[ 22.639810] Total of 1 processors activated (3738.79 BogoMIPS).
[ 22.639993] ENABLING IO-APIC IRQs
[ 22.640200] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 22.786070] Brought up 1 CPUs
[ 22.786189] Booting paravirtualized kernel on bare hardware
[ 22.786274] Time: 10:40:18 Date: 10/20/107
[ 22.786299] NET: Registered protocol family 16
[ 22.786389] EISA bus registered
[ 22.786409] ACPI: bus type pci registered
[ 22.813722] PCI: PCI BIOS revision 2.10 entry at 0xfd494, last bus=14
[ 22.813724] PCI: Using configuration type 1
[ 22.813726] Setting up standard PCI resources
[ 22.815404] ACPI: EC: Look up EC in DSDT
[ 22.816063] ACPI: EC: GPE=0x10, ports=0x66, 0x62
[ 22.896328] ACPI Error (dswload-0664): [\___] Namespace lookup failure, AE_NOT_FOUND
[ 22.896334] ACPI Exception (psloop-0225): AE_NOT_FOUND, During name lookup/catalog [20070126]
[ 22.896338] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0._INI] (Node da0df6c0), AE_NOT_FOUND
[ 22.896375] ACPI: Interpreter enabled
[ 22.896378] ACPI: (supports S0 S3 S4 S5)
[ 22.896392] ACPI: Using IOAPIC for interrupt routing
[ 22.900329] ACPI: EC: GPE=0x10, ports=0x66, 0x62
[ 22.900374] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 22.900382] PCI: Probing PCI hardware (bus 00)
[ 22.901642] PCI: Transparent bridge - 0000:00:14.4
[ 22.901748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.901986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 22.902102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 22.903738] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 22.903844] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 22.903947] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 22.904049] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 22.904152] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 22.904255] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 22.904357] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 22.904460] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 22.904552] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.904572] pnp: PnP ACPI init
[ 22.904579] ACPI: bus type pnp registered
[ 22.906157] pnp: PnP ACPI: found 10 devices
[ 22.906160] ACPI: ACPI bus type pnp unregistered
[ 22.906164] PnPBIOS: Disabled by ACPI PNP
[ 22.906210] PCI: Using ACPI for IRQ routing
[ 22.906213] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 22.937802] NET: Registered protocol family 8
[ 22.937805] NET: Registered protocol family 20
[ 22.937864] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 22.937872] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 22.937876] Time: tsc clocksource has been installed.
[ 22.937880] pnp: 00:08: ioport range 0x200-0x20f has been reserved
[ 22.937885] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 22.937888] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 22.937891] pnp: 00:09: iomem range 0xc0004800-0xc00057ff has been reserved
[ 22.937894] pnp: 00:09: iomem range 0x0-0xfff could not be reserved
[ 22.968138] PCI: Bridge: 0000:00:01.0
[ 22.968141] IO window: 9000-9fff
[ 22.968145] MEM window: d0000000-d00fffff
[ 22.968148] PREFETCH window: d8000000-dfffffff
[ 22.968159] PCI: Bus 10, cardbus bridge: 0000:09:01.0
[ 22.968161] IO window: 0000a400-0000a4ff
[ 22.968167] IO window: 0000a800-0000a8ff
[ 22.968174] PREFETCH window: 20000000-23ffffff
[ 22.968180] MEM window: 28000000-2bffffff
[ 22.968186] PCI: Bridge: 0000:00:14.4
[ 22.968190] IO window: a000-afff
[ 22.968197] MEM window: d0100000-d01fffff
[ 22.968202] PREFETCH window: 20000000-23ffffff
[ 22.968244] PCI: Enabling device 0000:09:01.0 (0000 -> 0003)
[ 22.968253] ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 22.968271] NET: Registered protocol family 2
[ 23.005857] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 23.005915] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 23.006322] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 23.006598] TCP: Hash tables configured (established 16384 bind 16384)
[ 23.006601] TCP reno registered
[ 23.017917] checking if image is initramfs... it is
[ 23.469358] Switched to high resolution mode on CPU 0
[ 23.646169] Freeing initrd memory: 7123k freed
[ 23.646717] audit: initializing netlink socket (disabled)
[ 23.646736] audit(1195555218.112:1): initialized
[ 23.648558] VFS: Disk quotas dquot_6.5.1
[ 23.648609] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 23.648711] io scheduler noop registered
[ 23.648713] io scheduler anticipatory registered
[ 23.648715] io scheduler deadline registered
[ 23.648729] io scheduler cfq registered (default)
[ 23.648786] Boot video device is 0000:01:05.0
[ 23.648937] isapnp: Scanning for PnP cards...
[ 24.005909] isapnp: No Plug & Play device found
[ 24.033580] Real Time Clock Driver v1.12ac
[ 24.033714] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 24.035038] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 24.035267] input: Macintosh mouse button emulation as /class/input/input0
[ 24.035340] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 24.040053] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 24.040060] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 24.040247] mice: PS/2 mouse device common for all mice
[ 24.040361] EISA: Probing bus 0 at eisa.0
[ 24.040375] Cannot allocate resource for EISA slot 1
[ 24.040404] Cannot allocate resource for EISA slot 8
[ 24.040406] EISA: Detected 0 cards.
[ 24.040522] TCP cubic registered
[ 24.040537] NET: Registered protocol family 1
[ 24.040562] Using IPI No-Shortcut mode
[ 24.040737] Magic number: 15:724:679
[ 24.041325] Freeing unused kernel memory: 364k freed
[ 24.080729] input: AT Translated Set 2 keyboard as /class/input/input1
[ 25.211676] AppArmor: AppArmor initialized<5>audit(1195555219.612:2): type=1505 info="AppArmor initialized" pid=1195
[ 25.217132] fuse init (API version 7.8)
[ 25.221135] Failure registering capabilities with primary security module.
[ 25.234581] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 25.234587] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 25.234599] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 25.246450] ACPI: Thermal Zone [THRM] (38 C)
[ 25.655301] SCSI subsystem initialized
[ 25.660357] libata version 2.21 loaded.
[ 25.661568] sata_sil 0000:00:12.0: version 2.2
[ 25.661639] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[ 25.661651] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 25.661741] scsi0 : sata_sil
[ 25.661786] scsi1 : sata_sil
[ 25.661944] ata1: SATA max UDMA/100 cmd 0xdc842080 ctl 0xdc84208a bmdma 0xdc842000 irq 17
[ 25.661949] ata2: SATA max UDMA/100 cmd 0xdc8420c0 ctl 0xdc8420ca bmdma 0xdc842008 irq 17
[ 25.670812] usbcore: registered new interface driver usbfs
[ 25.670841] usbcore: registered new interface driver hub
[ 25.670861] usbcore: registered new device driver usb
[ 25.684254] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 25.871978] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.588000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.596000] Time: acpi_pm clocksource has been installed.
[ 3.804000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.812000] ata1.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
[ 3.812000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.820000] ata1.00: configured for UDMA/100
[ 4.132000] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.132000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
[ 4.132000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.132000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.132000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 4.132000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0404000
[ 4.188000] usb usb1: configuration #1 chosen from 1 choice
[ 4.188000] hub 1-0:1.0: USB hub found
[ 4.188000] hub 1-0:1.0: 4 ports detected
[ 4.292000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.292000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.292000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 4.292000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd0405000
[ 4.348000] usb usb2: configuration #1 chosen from 1 choice
[ 4.348000] hub 2-0:1.0: USB hub found
[ 4.348000] hub 2-0:1.0: 4 ports detected
[ 4.452000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.452000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.452000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 4.452000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xd0406000
[ 4.452000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.452000] usb usb3: configuration #1 chosen from 1 choice
[ 4.452000] hub 3-0:1.0: USB hub found
[ 4.452000] hub 3-0:1.0: 8 ports detected
[ 4.560000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 4.560000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.560000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 4.564000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
[ 4.564000] ATIIXP: chipset revision 128
[ 4.564000] ATIIXP: not 100% native mode: will probe irqs later
[ 4.564000] ide1: BM-DMA at 0x8468-0x846f, BIOS settings: hdc:DMA, hdd:pio
[ 4.564000] Probing IDE interface ide1...
[ 4.592000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.592000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.592000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.592000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.592000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.592000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.592000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.592000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.592000] sda: sda1 sda2 sda3 sda4
[ 4.656000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.660000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.020000] Attempting manual resume
[ 5.020000] swsusp: Resume From Partition 8:4
[ 5.020000] PM: Checking swsusp image.
[ 5.020000] PM: Resume from disk failed.
[ 5.064000] kjournald starting. Commit interval 5 seconds
[ 5.064000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.300000] hdc: DVD/CDRW UJDA770, ATAPI CD/DVD-ROM drive
[ 5.636000] hdc: selected mode 0x42
[ 5.636000] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.636000] 8139cp 0000:09:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 5.636000] 8139cp 0000:09:02.0: Try the "8139too" driver instead.
[ 14.120000] Linux agpgart interface v0.102 (c) Dave Jones
[ 14.204000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.216000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.288000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 14.732000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 14.732000] Uniform CD-ROM driver Revision: 3.20
[ 15.040000] input: PC Speaker as /class/input/input2
[ 15.092000] ath_hal: module license 'Proprietary' taints kernel.
[ 15.092000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 15.120000] Yenta: CardBus bridge found at 0000:09:01.0 [1179:ff31]
[ 15.120000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 15.120000] Yenta: Routing CardBus interrupts to PCI
[ 15.120000] Yenta TI: socket 0000:09:01.0, mfunc 0x00001002, devctl 0x44
[ 15.156000] 8139too Fast Ethernet driver 0.9.28
[ 15.332000] wlan: 0.8.4.2 (0.9.3.2)
[ 15.352000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 15.352000] Socket status: 30000006
[ 15.352000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 15.352000] cs: IO port probe 0xa000-0xafff: clean.
[ 15.352000] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
[ 15.352000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[ 15.352000] ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 15.352000] eth0: RealTek RTL8139 at 0xdc978000, 00:16:36:fe:45:5d, IRQ 21
[ 15.352000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 15.364000] ath_pci: 0.9.4.5 (0.9.3.2)
[ 15.364000] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 16.000000] ath_rate_sample: 1.2 (0.9.3.2)
[ 16.000000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 16.000000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.000000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 16.000000] wifi0: mac 7.8 phy 4.5 radio 5.6
[ 16.000000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 16.000000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 16.000000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 16.000000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 16.000000] wifi0: Use hw queue 8 for CAB traffic
[ 16.000000] wifi0: Use hw queue 9 for beacons
[ 16.012000] wifi0: Atheros 5212: mem=0xd0110000, irq=17
[ 16.084000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[ 16.084000] synaptics: Toshiba Satellite L35 detected, limiting rate to 40pps.
[ 16.120000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 16.364000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19
[ 16.392000] cs: IO port probe 0x100-0x3af: clean.
[ 16.396000] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[ 16.396000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[ 16.396000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 16.400000] cs: IO port probe 0xa00-0xaff: clean.
[ 16.572000] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
[ 17.332000] si3054: cannot initialize. EXT MID = 0000
[ 17.736000] lp: driver loaded but no devices found
[ 17.804000] Adding 3068404k swap on /dev/sda4. Priority:-1 extents:1 across:3068404k
[ 18.200000] EXT3 FS on sda3, internal journal
[ 20.008000] ACPI: Battery Slot [BAT1] (battery present)
[ 20.052000] ACPI: AC Adapter [ACAD] (on-line)
[ 20.108000] No dock devices found.
[ 20.156000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.216000] input: Power Button (FF) as /class/input/input4
[ 20.220000] ACPI: Power Button (FF) [PWRF]
[ 20.256000] input: Lid Switch as /class/input/input5
[ 20.260000] ACPI: Lid Switch [LID]
[ 20.296000] input: Power Button (CM) as /class/input/input6
[ 20.300000] ACPI: Power Button (CM) [PWRB]
[ 22.024000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 23.716000] [fglrx] Maximum main memory to use for locked dma buffers: 371 MBytes.
[ 23.720000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 23.740000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 20
[ 25.764000] ppdev: user-space parallel port driver
[ 26.112000] [fglrx] total GART = 130023424
[ 26.112000] [fglrx] free GART = 114032640
[ 26.112000] [fglrx] max single GART = 114032640
[ 26.112000] [fglrx] total LFB = 67108864
[ 26.112000] [fglrx] free LFB = 52719616
[ 26.112000] [fglrx] max single LFB = 52719616
[ 26.112000] [fglrx] total Inv = 0
[ 26.112000] [fglrx] free Inv = 0
[ 26.112000] [fglrx] max single Inv = 0
[ 26.112000] [fglrx] total TIM = 0
[ 26.332000] audit(1195576844.513:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4906 profile="/usr/sbin/cupsd"
[ 29.876000] apm: BIOS not found.
[ 32.572000] Failure registering capabilities with primary security module.
[ 32.668000] NET: Registered protocol family 10
[ 32.668000] lo: Disabled Privacy Extensions
[ 37.412000] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 37.888000] NET: Registered protocol family 17
[ 41.380000] Bluetooth: Core ver 2.11
[ 41.380000] NET: Registered protocol family 31
[ 41.380000] Bluetooth: HCI device and connection manager initialized
[ 41.380000] Bluetooth: HCI socket layer initialized
[ 41.524000] Bluetooth: L2CAP ver 2.8
[ 41.524000] Bluetooth: L2CAP socket layer initialized
[ 41.748000] Bluetooth: RFCOMM socket layer initialized
[ 41.748000] Bluetooth: RFCOMM TTY layer initialized
[ 41.748000] Bluetooth: RFCOMM ver 1.8
[ 42.784000] ath0: no IPv6 routers present
[ 53.616000] eth0: no IPv6 routers present
[ 4443.844000] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 4444.056000] usb 1-2: configuration #1 chosen from 1 choice
[ 4444.876000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8604
[ 4444.876000] usbcore: registered new interface driver usblp
[ 4444.876000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 7141.724000] usb 1-2: USB disconnect, address 2
[ 7141.724000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: removed
[12769.856000] [fglrx] PCIe has already been initialized. Reinitializing ...
[12769.908000] [fglrx] total GART = 130023424
[12769.908000] [fglrx] free GART = 114032640
[12769.908000] [fglrx] max single GART = 114032640
[12769.908000] [fglrx] total LFB = 67108864
[12769.908000] [fglrx] free LFB = 52719616
[12769.908000] [fglrx] max single LFB = 52719616
[12769.908000] [fglrx] total Inv = 0
[12769.908000] [fglrx] free Inv = 0
[12769.908000] [fglrx] max single Inv = 0
[12769.908000] [fglrx] total TIM = 0
[12791.452000] hda_intel: azx_get_response timeout, switching to polling mode...
[12792.456000] hda_intel: azx_get_response timeout, switching to single_cmd mode...
[50713.340000] pccard: CardBus card inserted into slot 0
[50713.340000] yenta EnE: chaning testregister 0xC9, 04 -> 04
[50713.908000] Linux video capture interface: v2.00
[50713.972000] saa7130/34: v4l2 driver version 0.2.14 loaded
[50713.972000] PCI: Enabling device 0000:0a:00.0 (0000 -> 0002)
[50713.972000] ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 20 (level, low) -> IRQ 16
[50713.972000] saa7133[0]: found at 0000:0a:00.0, rev: 240, irq: 16, latency: 0, mmio: 0x28000000
[50713.972000] PCI: Setting latency timer of device 0000:0a:00.0 to 64
[50713.972000] saa7133[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
[50713.972000] saa7133[0]: board init: gpio is e2c0c0
[50714.076000] saa7133[0]: Huh, no eeprom present (err=-5)?
[50714.080000] saa7133[0]: registered device video0 [v4l2]
[50714.080000] saa7133[0]: registered device vbi0
[50714.108000] saa7134 ALSA driver for DMA sound loaded
[50714.108000] saa7133[0]/alsa: saa7133[0] at 0x28000000 irq 16 registered as card -2