rendered paste body
[ 0.000000] Bootdata ok (command line is root=/dev/sda7 ro quiet splash)
[ 0.000000] Linux version 2.6.17-10-generic (root@king) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 21:16:35 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v002 Nvidia ) @ 0x00000000000f7bc0
[ 0.000000] ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee3100
[ 0.000000] ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007feec880
[ 0.000000] ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x000000007feeca80
[ 0.000000] ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007feecb00
[ 0.000000] ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007feec9c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x03000000) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fee0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000
[ 0.000000] On node 0 totalpages: 515387
[ 0.000000] DMA zone: 2591 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 512796 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:3 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:3 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 1720000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/sda7 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer.
[ 0.000000] time.c: Detected 2813.372 MHz processor.
[ 28.733710] Console: colour VGA+ 80x25
[ 28.734360] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 28.735332] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 28.747679] Memory: 2052584k/2096000k available (2129k kernel code, 43028k reserved, 1424k data, 188k init)
[ 28.824889] Calibrating delay using timer specific routine.. 5631.88 BogoMIPS (lpj=11263778)
[ 28.824928] Security Framework v1.0.0 initialized
[ 28.824932] SELinux: Disabled at boot.
[ 28.824947] Mount-cache hash table entries: 256
[ 28.825042] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 28.825045] CPU: L2 Cache: 1024K (64 bytes/line)
[ 28.825047] CPU 0/0(2) -> Node 0 -> Core 0
[ 28.825058] SMP alternatives: switching to UP code
[ 28.825216] checking if image is initramfs... it is
[ 29.169881] Freeing initrd memory: 5711k freed
[ 29.172094] ACPI: Core revision 20060707
[ 29.179113] ACPI: Looking for DSDT ... not found!
[ 29.224899] Using local APIC timer interrupts.
[ 29.260352] result 12559706
[ 29.260354] Detected 12.559 MHz APIC timer.
[ 29.263784] SMP alternatives: switching to SMP code
[ 29.263829] Booting processor 1/2 APIC 0x1
[ 29.275281] Initializing CPU#1
[ 29.352565] Calibrating delay using timer specific routine.. 5625.65 BogoMIPS (lpj=11251319)
[ 29.352570] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 29.352572] CPU: L2 Cache: 1024K (64 bytes/line)
[ 29.352573] CPU 1/1(2) -> Node 0 -> Core 1
[ 29.352654] AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
[ 29.356552] CPU 1: Syncing TSC to CPU 0.
[ 29.355421] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 569 cycles)
[ 29.355425] Brought up 2 CPUs
[ 29.355471] testing NMI watchdog ... OK.
[ 29.953800] migration_cost=280
[ 29.954014] NET: Registered protocol family 16
[ 29.954032] ACPI: bus type pci registered
[ 29.956484] PCI: Using MMCONFIG at f0000000
[ 29.956508] PCI: No mmconfig possible on device 0:18
[ 29.969116] ACPI: Interpreter enabled
[ 29.969119] ACPI: Using IOAPIC for interrupt routing
[ 29.969702] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.969710] PCI: Probing PCI hardware (bus 00)
[ 29.975554] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0c.0
[ 29.975807] Boot video device is 0000:01:00.0
[ 29.975947] PCI: Transparent bridge - 0000:00:0e.0
[ 29.976095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 30.052268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 30.056889] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[ 30.057212] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
[ 30.057539] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.057860] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.058182] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
[ 30.058506] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.058828] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 30.059149] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.059470] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.059792] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
[ 30.060113] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 30.060435] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[ 30.060758] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 30.061080] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.061404] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 30.061741] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 30.062075] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 30.062396] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 30.062717] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 30.063040] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 30.063434] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 30.063817] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 30.064200] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 30.064583] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 30.064965] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 30.065351] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 30.065738] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 30.066122] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 30.066506] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 30.066890] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 30.067275] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
[ 30.067659] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 30.068044] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 30.068429] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 30.068813] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 30.069196] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 30.069598] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 30.069981] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 30.070365] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 30.070748] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
[ 30.070942] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 30.070950] pnp: PnP ACPI init
[ 30.078032] pnp: PnP ACPI: found 14 devices
[ 30.078063] PCI: Using ACPI for IRQ routing
[ 30.078066] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 30.078137] hpet0: at MMIO 0xfefff000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 31
[ 30.078141] hpet0: 3 32-bit timers, 25000000 Hz
[ 30.079178] PCI-DMA: Disabling IOMMU.
[ 30.079544] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[ 30.079546] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 30.079548] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 30.079550] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[ 30.079552] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 30.079554] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 30.079690] PCI: Bridge: 0000:00:04.0
[ 30.079692] IO window: a000-afff
[ 30.079694] MEM window: fa000000-fcffffff
[ 30.079696] PREFETCH window: e0000000-efffffff
[ 30.079698] PCI: Bridge: 0000:00:0e.0
[ 30.079700] IO window: 9000-9fff
[ 30.079702] MEM window: fdf00000-fdffffff
[ 30.079703] PREFETCH window: disabled.
[ 30.079705] PCI: Bridge: 0000:00:16.0
[ 30.079707] IO window: 8000-8fff
[ 30.079709] MEM window: fde00000-fdefffff
[ 30.079710] PREFETCH window: disabled.
[ 30.079717] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 30.079721] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 30.079726] PCI: Setting latency timer of device 0000:00:16.0 to 64
[ 30.079756] NET: Registered protocol family 2
[ 30.117351] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 30.117588] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 30.119010] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 30.119354] TCP: Hash tables configured (established 262144 bind 65536)
[ 30.119356] TCP reno registered
[ 30.119662] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 30.119920] audit: initializing netlink socket (disabled)
[ 30.119928] audit(1195494392.392:1): initialized
[ 30.120049] VFS: Disk quotas dquot_6.5.1
[ 30.120063] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 30.120097] Initializing Cryptographic API
[ 30.120100] io scheduler noop registered
[ 30.120106] io scheduler anticipatory registered
[ 30.120113] io scheduler deadline registered
[ 30.120127] io scheduler cfq registered (default)
[ 30.120673] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 30.120676] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
[ 30.120687] assign_interrupt_mode Found MSI capability
[ 30.120714] Allocate Port Service[0000:00:04.0:pcie00]
[ 30.120740] Allocate Port Service[0000:00:04.0:pcie03]
[ 30.120769] PCI: Setting latency timer of device 0000:00:16.0 to 64
[ 30.120772] pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
[ 30.120789] assign_interrupt_mode Found MSI capability
[ 30.120808] Allocate Port Service[0000:00:16.0:pcie00]
[ 30.120828] Allocate Port Service[0000:00:16.0:pcie03]
[ 30.135057] Real Time Clock Driver v1.12ac
[ 30.135199] hpet_resources: 0xfefff000 is busy
[ 30.135209] Linux agpgart interface v0.101 (c) Dave Jones
[ 30.135211] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 30.135319] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.135691] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.135818] mice: PS/2 mouse device common for all mice
[ 30.136176] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 30.136255] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 30.136258] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 30.136390] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 30.136392] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 30.678335] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 30.679077] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 30.679253] TCP bic registered
[ 30.679260] NET: Registered protocol family 1
[ 30.679265] NET: Registered protocol family 8
[ 30.679266] NET: Registered protocol family 20
[ 30.682142] ACPI: (supports S0 S1 S3 S4 S5)
[ 30.682193] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 30.682211] Freeing unused kernel memory: 188k freed
[ 30.702086] input: AT Translated Set 2 keyboard as /class/input/input0
[ 30.735821] vga16fb: initializing
[ 30.735825] vga16fb: mapped to 0xffff8100000a0000
[ 30.859408] Console: switching to colour frame buffer device 80x25
[ 30.859411] fb0: VGA16 VGA frame buffer device
[ 31.877064] Capability LSM initialized
[ 31.893426] ACPI: Fan [FAN] (on)
[ 31.896811] ACPI: Thermal Zone [THRM] (40 C)
[ 32.104800] SCSI subsystem initialized
[ 32.107235] libata version 1.20 loaded.
[ 32.107946] sata_nv 0000:00:0d.0: version 0.8
[ 32.108364] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 32.108368] GSI 16 sharing vector 0xC1 and IRQ 16
[ 32.108373] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 193
[ 32.108617] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 32.108679] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 193
[ 32.108698] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 193
[ 32.311369] ata1: SATA link up 1.5 Gbps (SStatus 113)
[ 32.475049] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:407f
[ 32.475052] ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
[ 32.483046] ata1: dev 0 configured for UDMA/133
[ 32.483049] scsi0 : sata_nv
[ 32.686369] ata2: SATA link down (SStatus 0)
[ 32.686371] scsi1 : sata_nv
[ 32.686708] Vendor: ATA Model: ST3250620AS Rev: 3.AA
[ 32.686714] Type: Direct-Access ANSI SCSI revision: 05
[ 32.687154] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 32.687157] GSI 17 sharing vector 0xC9 and IRQ 17
[ 32.687163] ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 201
[ 32.687318] PCI: Setting latency timer of device 0000:00:0d.1 to 64
[ 32.687360] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 201
[ 32.687373] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 201
[ 32.690347] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 32.690356] sda: Write Protect is off
[ 32.690358] sda: Mode Sense: 00 3a 00 00
[ 32.690368] SCSI device sda: drive cache: write back
[ 32.690399] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 32.690405] sda: Write Protect is off
[ 32.690406] sda: Mode Sense: 00 3a 00 00
[ 32.690415] SCSI device sda: drive cache: write back
[ 32.690418] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 32.731746] sd 0:0:0:0: Attached scsi disk sda
[ 32.889822] ata3: SATA link down (SStatus 0)
[ 32.889826] scsi2 : sata_nv
[ 33.093273] ata4: SATA link down (SStatus 0)
[ 33.093276] scsi3 : sata_nv
[ 33.093717] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 33.093720] GSI 18 sharing vector 0xD1 and IRQ 18
[ 33.093725] ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 209
[ 33.093894] PCI: Setting latency timer of device 0000:00:0d.2 to 64
[ 33.093935] ata5: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 209
[ 33.093949] ata6: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 209
[ 33.296720] ata5: SATA link down (SStatus 0)
[ 33.296722] scsi4 : sata_nv
[ 33.500169] ata6: SATA link down (SStatus 0)
[ 33.500171] scsi5 : sata_nv
[ 33.500728] NFORCE-MCP55: IDE controller at PCI slot 0000:00:0c.0
[ 33.500740] NFORCE-MCP55: chipset revision 161
[ 33.500741] NFORCE-MCP55: not 100% native mode: will probe irqs later
[ 33.500744] NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.
[ 33.500747] NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133 controller
[ 33.500752] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
[ 33.500759] Probing IDE interface ide0...
[ 33.787478] hda: WDC WD800JB-00FMA0, ATA DISK drive
[ 34.066723] hdb: WDC WD1600JB-00GVA0, ATA DISK drive
[ 34.125140] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 34.151520] hda: max request size: 128KiB
[ 34.151611] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[ 34.151685] hda: cache flushes supported
[ 34.151711] hda: hda1 hda2 < hda5 >
[ 34.177461] hdb: max request size: 512KiB
[ 34.178729] hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[ 34.180711] hdb: cache flushes supported
[ 34.180721] hdb: hdb1
[ 34.947176] Probing IDE interface ide1...
[ 34.963171] usbcore: registered new driver usbfs
[ 34.963189] usbcore: registered new driver hub
[ 34.963715] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 34.964156] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 34.964159] GSI 19 sharing vector 0xD9 and IRQ 19
[ 34.964165] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 217
[ 34.964408] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 34.964412] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 34.964517] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
[ 34.983772] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[ 34.990181] ohci_hcd 0000:00:0a.0: irq 217, io mem 0xfe02f000
[ 34.995173] ieee1394: Initialized config rom entry `ip1394'
[ 35.046103] usb usb1: configuration #1 chosen from 1 choice
[ 35.046175] hub 1-0:1.0: USB hub found
[ 35.046183] hub 1-0:1.0: 10 ports detected
[ 35.148269] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 35.148275] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 193
[ 35.148279] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 35.148287] forcedeth: using HIGHDMA
[ 35.148680] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 35.148684] GSI 20 sharing vector 0xE1 and IRQ 20
[ 35.148689] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 225
[ 35.198816] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 35.454872] usb 1-4: new low speed USB device using ohci_hcd and address 2
[ 35.666500] eth0: forcedeth.c: subsystem: 01043:cb84 bound to 0000:00:10.0
[ 35.666878] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 22
[ 35.666880] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [AMC1] -> GSI 22 (level, low) -> IRQ 201
[ 35.666884] PCI: Setting latency timer of device 0000:00:11.0 to 64
[ 35.666887] forcedeth: using HIGHDMA
[ 35.669240] usb 1-4: configuration #1 chosen from 1 choice
[ 35.973485] usb 1-9: new full speed USB device using ohci_hcd and address 3
[ 36.185086] eth1: forcedeth.c: subsystem: 01043:cb84 bound to 0000:00:11.0
[ 36.185947] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 36.185950] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 209
[ 36.186143] PCI: Setting latency timer of device 0000:00:0a.1 to 64
[ 36.186147] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 36.186324] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
[ 36.186347] ehci_hcd 0000:00:0a.1: debug port 1
[ 36.186349] PCI: cache line size of 64 is not supported by device 0000:00:0a.1
[ 36.186355] ehci_hcd 0000:00:0a.1: irq 209, io mem 0xfe02e000
[ 36.186361] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.186460] usb usb2: configuration #1 chosen from 1 choice
[ 36.186529] hub 2-0:1.0: USB hub found
[ 36.186534] hub 2-0:1.0: 10 ports detected
[ 36.195707] usb 1-9: configuration #1 chosen from 1 choice
[ 36.198676] usb 1-9: can't set config #1, error -110
[ 36.198698] usb 1-9: USB disconnect, address 3
[ 36.468270] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000177777b]
[ 36.751384] usb 2-9: new high speed USB device using ehci_hcd and address 3
[ 36.889368] usb 2-9: configuration #1 chosen from 1 choice
[ 36.890498] usb 1-4: USB disconnect, address 2
[ 36.890992] usbcore: registered new driver hiddev
[ 37.194187] usb 1-4: new low speed USB device using ohci_hcd and address 4
[ 37.408210] usb 1-4: configuration #1 chosen from 1 choice
[ 37.422223] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[ 37.422286] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-4
[ 37.422292] usbcore: registered new driver usbhid
[ 37.422294] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 37.489407] Attempting manual resume
[ 37.504941] kjournald starting. Commit interval 5 seconds
[ 37.504952] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.085969] Floppy drive(s): fd0 is 1.44M
[ 43.144762] FDC 0 is a post-1991 82077
[ 43.311844] eth2: no link during initialization.
[ 43.327399] input: PC Speaker as /class/input/input2
[ 43.389438] parport: PnPBIOS parport detected.
[ 43.389469] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 43.502771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 43.504564] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 43.560596] sata_sil24 0000:03:00.0: version 0.23
[ 43.561043] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 43.561046] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 225
[ 43.561560] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 43.561606] ata7: SATA max UDMA/100 cmd 0xFFFFC200100B0000 ctl 0x0 bmdma 0x0 irq 225
[ 43.561621] ata8: SATA max UDMA/100 cmd 0xFFFFC200100B2000 ctl 0x0 bmdma 0x0 irq 225
[ 43.589036] ts: Compaq touchscreen protocol output
[ 43.764444] ata7: SATA link down (SStatus 0)
[ 43.764448] scsi6 : sata_sil24
[ 43.781923] rtl_ieee80211_crypt: registered algorithm 'NULL'
[ 43.781925] rtl_ieee80211_crypt: registered algorithm 'TKIP'
[ 43.781926] rtl_ieee80211_crypt: registered algorithm 'WEP'
[ 43.781928] rtl_ieee80211_crypt: registered algorithm 'CCMP'
[ 43.891861]
[ 43.891862] Linux kernel driver for RTL8187 based WLAN cards
[ 43.891864] Copyright (c) 2004-2005, Andrea Merello
[ 43.891866] rtl8187: Initializing module
[ 43.891867] rtl8187: Wireless extensions version 20
[ 43.891868] rtl8187: Initializing proc filesystem
[ 43.892348] rtl8187: Reported EEPROM chip is a 93c46 (1Kbit)
[ 43.929704] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 43.967900] ata8: SATA link down (SStatus 0)
[ 43.967904] scsi7 : sata_sil24
[ 43.972479] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 43.972482] ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 217
[ 43.972674] PCI: Setting latency timer of device 0000:00:0e.1 to 64
[ 44.030699] rtl8187: Card MAC address is 00:15:af:36:93:5f
[ 44.198965] rtl8187: Card reports RF frontend Realtek 8225
[ 44.198967] rtl8187: WW:This driver has EXPERIMENTAL support for this chipset.
[ 44.198969] rtl8187: WW:use it with care and at your own risk and
[ 44.198971] rtl8187: WW:**PLEASE** REPORT SUCCESS/INSUCCESS TO andreamrl@tiscali.it
[ 44.243589] rtl8187: This seems a new V2 radio
[ 44.244210] rtl8187: PAPE from CONFIG2: 0
[ 44.244261] rtl8187: Driver probe completed
[ 44.244262]
[ 44.244269] usbcore: registered new driver rtl8187
[ 44.554312] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 44.794103] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 44.794107] GSI 21 sharing vector 0x5A and IRQ 21
[ 44.794113] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 90
[ 44.869279] rtl8187: Card successfully reset
[ 45.073722] lp0: using parport0 (interrupt-driven).
[ 46.178668] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 46.178671] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 46.204798] Adding 2096440k swap on /dev/disk/by-uuid/2b07a5f6-614e-4b8d-bdbd-b689c46bfb61. Priority:-1 extents:1 across:2096440k
[ 46.348585] EXT3 FS on sda7, internal journal
[ 48.190993] kjournald starting. Commit interval 5 seconds
[ 48.200564] EXT3 FS on sda5, internal journal
[ 48.200568] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.316585] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 48.368293] NTFS volume version 3.1.
[ 48.416265] NTFS volume version 3.1.
[ 48.449133] NTFS volume version 3.1.
[ 48.491042] NTFS volume version 3.1.
[ 49.865589] NET: Registered protocol family 17
[ 50.004349] NET: Registered protocol family 10
[ 50.004421] lo: Disabled Privacy Extensions
[ 50.004460] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 50.004735] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 50.004753] IPv6 over IPv4 tunneling driver
[ 54.403836] ACPI: Power Button (FF) [PWRF]
[ 54.403843] ACPI: Power Button (CM) [PWRB]
[ 54.489211] ibm_acpi: ec object not found
[ 54.529357] pcc_acpi: loading...
[ 54.724400] powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
[ 54.724367] powernow-k8: MP systems not supported by PSB BIOS structure
[ 54.724426] powernow-k8: MP systems not supported by PSB BIOS structure
[ 59.992636] eth1: no IPv6 routers present
[ 59.992791] Bluetooth: Core ver 2.8
[ 59.992794] NET: Registered protocol family 31
[ 59.992795] Bluetooth: HCI device and connection manager initialized
[ 59.992806] Bluetooth: HCI socket layer initialized
[ 60.049091] Bluetooth: L2CAP ver 2.8
[ 60.049095] Bluetooth: L2CAP socket layer initialized
[ 60.095103] Bluetooth: RFCOMM socket layer initialized
[ 60.095113] Bluetooth: RFCOMM TTY layer initialized
[ 60.095115] Bluetooth: RFCOMM ver 1.7