rendered paste bodylspci:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 12)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 12)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 12)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 12)
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 12)
01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX200] (rev b2)
02:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
02:0d.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
02:0d.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
dmesg:
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131008) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131008
[ 0.000000] HighMem 131008 -> 131008
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131008
[ 0.000000] On node 0 totalpages: 131008
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125921 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FF980 checksum 0
[ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 D845HV WN84510A 20010914 MSFT 1011)
[ 0.000000] ACPI: FACP 1FFF1000, 0074 (r1 D845HV HV84510A 20010914 MSFT 1011)
[ 0.000000] ACPI: DSDT 1FFE0000, 2EC0 (r1 D845HV HV84510A 6 MSFT 100000B)
[ 0.000000] ACPI: FACS 1FFF8000, 0040
[ 0.000000] ACPI: APIC 1FFE2EC0, 0068 (r1 D845HV HV84510A 20010914 MSFT 1011)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Built 1 zonelists. Total pages: 129985
[ 0.000000] Kernel command line: root=/dev/sda8 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1595.225 MHz processor.
[ 26.725923] Console: colour VGA+ 80x25
[ 26.726628] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 26.727265] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 26.748855] Memory: 505868k/524032k available (2015k kernel code, 17616k reserved, 916k data, 364k init, 0k highmem)
[ 26.748872] virtual kernel memory layout:
[ 26.748874] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 26.748878] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 26.748880] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 26.748882] lowmem : 0xc0000000 - 0xdffc0000 ( 511 MB)
[ 26.748884] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 26.748886] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 26.748887] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 26.748893] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 26.748961] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 26.828864] Calibrating delay using timer specific routine.. 3193.34 BogoMIPS (lpj=6386686)
[ 26.828910] Security Framework v1.0.0 initialized
[ 26.828922] SELinux: Disabled at boot.
[ 26.828944] Mount-cache hash table entries: 512
[ 26.829196] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 26.829218] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 26.829223] CPU: L2 cache: 512K
[ 26.829227] CPU: Hyper-Threading is disabled
[ 26.829231] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000
[ 26.829256] Compat vDSO mapped to ffffe000.
[ 26.829279] Checking 'hlt' instruction... OK.
[ 26.845085] SMP alternatives: switching to UP code
[ 26.845447] Freeing SMP alternatives: 11k freed
[ 26.846012] Early unpacking initramfs... done
[ 27.514618] ACPI: Core revision 20070126
[ 27.514726] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 27.518316] CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04
[ 27.518379] Total of 1 processors activated (3193.34 BogoMIPS).
[ 27.518536] ENABLING IO-APIC IRQs
[ 27.518750] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 27.663604] Brought up 1 CPUs
[ 27.663829] Booting paravirtualized kernel on bare hardware
[ 27.663932] Time: 15:44:16 Date: 10/19/107
[ 27.663978] NET: Registered protocol family 16
[ 27.664164] EISA bus registered
[ 27.664185] ACPI: bus type pci registered
[ 27.664419] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
[ 27.664423] PCI: Using configuration type 1
[ 27.664426] Setting up standard PCI resources
[ 27.666832] ACPI: EC: Look up EC in DSDT
[ 27.672694] ACPI: Interpreter enabled
[ 27.672701] ACPI: (supports S0 S1 S4 S5)
[ 27.672735] ACPI: Using IOAPIC for interrupt routing
[ 27.679694] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 27.679727] PCI: Probing PCI hardware (bus 00)
[ 27.680035] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 27.680042] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[ 27.680628] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 27.680877] PCI: Transparent bridge - 0000:00:1e.0
[ 27.680917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 27.681062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 27.683162] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 27.683315] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 27.683465] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 27.683633] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 27.683784] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 27.683936] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 27.684087] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 27.684241] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 27.684423] ACPI: Power Resource [FDDP] (off)
[ 27.684472] ACPI: Power Resource [URP1] (off)
[ 27.684520] ACPI: Power Resource [URP2] (off)
[ 27.684568] ACPI: Power Resource [LPTP] (off)
[ 27.684588] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.684614] pnp: PnP ACPI init
[ 27.684632] ACPI: bus type pnp registered
[ 27.688481] pnp: PnP ACPI: found 12 devices
[ 27.688486] ACPI: ACPI bus type pnp unregistered
[ 27.688495] PnPBIOS: Disabled by ACPI PNP
[ 27.688605] PCI: Using ACPI for IRQ routing
[ 27.688611] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 27.693248] NET: Registered protocol family 8
[ 27.693251] NET: Registered protocol family 20
[ 27.693389] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 27.693395] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 27.693400] pnp: 00:0b: iomem range 0x100000-0x1fffffff could not be reserved
[ 27.693406] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 27.695485] Time: tsc clocksource has been installed.
[ 27.723929] PCI: Bridge: 0000:00:01.0
[ 27.723932] IO window: disabled.
[ 27.723940] MEM window: f8900000-fa9fffff
[ 27.723946] PREFETCH window: e0600000-f06fffff
[ 27.723953] PCI: Bridge: 0000:00:1e.0
[ 27.723958] IO window: d000-dfff
[ 27.723966] MEM window: faa00000-feafffff
[ 27.723972] PREFETCH window: f0700000-f07fffff
[ 27.723998] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 27.724020] NET: Registered protocol family 2
[ 27.763475] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 27.763569] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 27.763863] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 27.764061] TCP: Hash tables configured (established 16384 bind 16384)
[ 27.764066] TCP reno registered
[ 27.775627] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 28.399363] it is
[ 29.099661] Freeing initrd memory: 9241k freed
[ 29.100398] audit: initializing netlink socket (disabled)
[ 29.100432] audit(1195487056.844:1): initialized
[ 29.104267] VFS: Disk quotas dquot_6.5.1
[ 29.104370] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 29.104558] io scheduler noop registered
[ 29.104562] io scheduler anticipatory registered
[ 29.104565] io scheduler deadline registered
[ 29.104594] io scheduler cfq registered (default)
[ 29.104668] Boot video device is 0000:01:00.0
[ 29.104965] isapnp: Scanning for PnP cards...
[ 29.461103] isapnp: No Plug & Play device found
[ 29.513071] Real Time Clock Driver v1.12ac
[ 29.513242] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.513380] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.514866] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.516723] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.517226] input: Macintosh mouse button emulation as /class/input/input0
[ 29.517395] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 29.521424] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.521438] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 29.521804] mice: PS/2 mouse device common for all mice
[ 29.522005] EISA: Probing bus 0 at eisa.0
[ 29.522053] EISA: Detected 0 cards.
[ 29.522251] TCP cubic registered
[ 29.522276] NET: Registered protocol family 1
[ 29.522321] Using IPI No-Shortcut mode
[ 29.522605] Magic number: 15:732:740
[ 29.523784] Freeing unused kernel memory: 364k freed
[ 29.560847] input: AT Translated Set 2 keyboard as /class/input/input1
[ 30.896875] fuse init (API version 7.8)
[ 30.907193] Capability LSM initialized
[ 30.924527] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 31.989408] SCSI subsystem initialized
[ 32.000806] libata version 2.21 loaded.
[ 32.003939] ata_piix 0000:00:1f.1: version 2.11
[ 32.004060] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 32.004213] scsi0 : ata_piix
[ 32.004309] scsi1 : ata_piix
[ 32.004491] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 32.004497] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 32.023638] usbcore: registered new interface driver usbfs
[ 32.023688] usbcore: registered new interface driver hub
[ 32.023737] usbcore: registered new device driver usb
[ 32.025600] USB Universal Host Controller Interface driver v3.0
[ 32.134750] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 32.134758] e100: Copyright(c) 1999-2006 Intel Corporation
[ 32.326750] Floppy drive(s): fd0 is 1.44M
[ 32.341013] ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
[ 32.341021] ata1.00: 156301488 sectors, multi 16: LBA48
[ 32.341912] ata1.01: Host Protected Area detected:
[ 32.341914] current size: 78163247 sectors
[ 32.341916] native size: 78165360 sectors
[ 32.343993] ata1.01: native size increased to 78165360 sectors
[ 32.343998] ata1.01: ATA-5: WDC WD400BB-00DGA0, 05.03E05, max UDMA/100
[ 32.344002] ata1.01: 78165360 sectors, multi 16: LBA
[ 32.357044] ata1.00: configured for UDMA/100
[ 32.373672] ata1.01: configured for UDMA/100
[ 32.389956] FDC 0 is a post-1991 82077
[ 33.023788] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL03, max UDMA/33
[ 33.023800] ata2.01: ATAPI: Memorex 24MAXX 1040, 5WS2, max UDMA/33
[ 33.195545] ata2.00: configured for UDMA/33
[ 33.367272] ata2.01: configured for UDMA/33
[ 33.367518] scsi 0:0:0:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
[ 33.368319] scsi 0:0:1:0: Direct-Access ATA WDC WD400BB-00DG 05.0 PQ: 0 ANSI: 5
[ 33.372533] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL03 PQ: 0 ANSI: 5
[ 33.373436] scsi 1:0:1:0: CD-ROM Memorex 24MAXX 1040 5WS2 PQ: 0 ANSI: 5
[ 33.381308] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 16
[ 33.381334] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 33.381341] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 33.382039] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 33.382088] uhci_hcd 0000:00:1f.2: irq 16, io base 0x0000ef40
[ 33.382857] usb usb1: configuration #1 chosen from 1 choice
[ 33.383173] hub 1-0:1.0: USB hub found
[ 33.383188] hub 1-0:1.0: 2 ports detected
[ 33.412813] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 33.412861] sd 0:0:0:0: [sda] Write Protect is off
[ 33.412866] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.412898] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.413027] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 33.413046] sd 0:0:0:0: [sda] Write Protect is off
[ 33.413050] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.413079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.413088] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 33.478701] sd 0:0:0:0: [sda] Attached SCSI disk
[ 33.479081] sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
[ 33.479106] sd 0:0:1:0: [sdb] Write Protect is off
[ 33.479111] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.479143] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.479236] sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
[ 33.479254] sd 0:0:1:0: [sdb] Write Protect is off
[ 33.479258] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.479287] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.479294] sdb:<6>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 17
[ 33.487136] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 33.487143] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 33.487185] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 33.487223] uhci_hcd 0000:00:1f.4: irq 17, io base 0x0000ef80
[ 33.487411] usb usb2: configuration #1 chosen from 1 choice
[ 33.487460] hub 2-0:1.0: USB hub found
[ 33.487474] hub 2-0:1.0: 2 ports detected
[ 33.503144] sdb1
[ 33.503690] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 33.511195] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.511236] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 33.511277] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 33.511315] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 33.591359] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 33.615171] e100: eth0: e100_probe: addr 0xfeaff000, irq 18, MAC addr 00:03:47:CE:F1:01
[ 33.629308] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 33.629320] Uniform CD-ROM driver Revision: 3.20
[ 33.629749] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 33.688670] sr1: scsi3-mmc drive: 137x/40x writer cd/rw xa/form2 cdda tray
[ 33.689179] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 33.830421] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 33.984562] usb 2-2: configuration #1 chosen from 1 choice
[ 33.987481] hub 2-2:1.0: USB hub found
[ 33.990377] hub 2-2:1.0: 4 ports detected
[ 34.261975] Attempting manual resume
[ 34.261982] swsusp: Resume From Partition 8:5
[ 34.261985] PM: Checking swsusp image.
[ 34.269771] PM: Resume from disk failed.
[ 34.300003] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.300011] EXT3-fs: write access will be enabled during recovery.
[ 38.080432] kjournald starting. Commit interval 5 seconds
[ 38.080467] EXT3-fs: sda8: orphan cleanup on readonly fs
[ 38.080479] ext3_orphan_cleanup: deleting unreferenced inode 246795
[ 38.098604] ext3_orphan_cleanup: deleting unreferenced inode 243381
[ 38.109103] EXT3-fs: sda8: 2 orphan inodes deleted
[ 38.109108] EXT3-fs: recovery complete.
[ 38.185203] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.603976] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
[ 46.603980] don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
[ 46.603983] you are certain that your <4>intel_rng: system has a functional
[ 46.603985] RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
[ 46.638659] iTCO_vendor_support: vendor-support=0
[ 46.640505] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 46.640626] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 46.640637] iTCO_wdt: No card detected
[ 46.688479] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 46.694168] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 46.900002] Linux agpgart interface v0.102 (c) Dave Jones
[ 47.087619] agpgart: Detected an Intel 845G Chipset.
[ 47.091927] agpgart: AGP aperture is 64M @ 0xf4000000
[ 47.344074] Linux video capture interface: v2.00
[ 48.703876] nvidia: module license 'NVIDIA' taints kernel.
[ 48.982558] cx2388x v4l2 driver version 0.0.6 loaded
[ 48.982672] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 48.982751] cx88[0]: Your board isn't known (yet) to the driver. You can
[ 48.982754] cx88[0]: try to pick one of the existing card configs via
[ 48.982756] cx88[0]: card=<n> insmod option. Updating to the latest
[ 48.982758] cx88[0]: version might help as well.
[ 48.982762] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 48.982766] cx88[0]: card=0 -> UNKNOWN/GENERIC
[ 48.982770] cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
[ 48.982773] cx88[0]: card=2 -> GDI Black Gold
[ 48.982776] cx88[0]: card=3 -> PixelView
[ 48.982779] cx88[0]: card=4 -> ATI TV Wonder Pro
[ 48.982783] cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
[ 48.982786] cx88[0]: card=6 -> AverTV Studio 303 (M126)
[ 48.982790] cx88[0]: card=7 -> MSI TV-@nywhere Master
[ 48.982793] cx88[0]: card=8 -> Leadtek Winfast DV2000
[ 48.982796] cx88[0]: card=9 -> Leadtek PVR 2000
[ 48.982799] cx88[0]: card=10 -> IODATA GV-VCP3/PCI
[ 48.982803] cx88[0]: card=11 -> Prolink PlayTV PVR
[ 48.982806] cx88[0]: card=12 -> ASUS PVR-416
[ 48.982809] cx88[0]: card=13 -> MSI TV-@nywhere
[ 48.982812] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
[ 48.982816] cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
[ 48.982819] cx88[0]: card=16 -> KWorld LTV883RF
[ 48.982822] cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
[ 48.982826] cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
[ 48.982829] cx88[0]: card=19 -> Conexant DVB-T reference design
[ 48.982833] cx88[0]: card=20 -> Provideo PV259
[ 48.982836] cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
[ 48.982839] cx88[0]: card=22 -> pcHDTV HD3000 HDTV
[ 48.982843] cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
[ 48.982846] cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[ 48.982850] cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[ 48.982854] cx88[0]: card=26 -> IODATA GV/BCTV7E
[ 48.982857] cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[ 48.982861] cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
[ 48.982864] cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
[ 48.982868] cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
[ 48.982871] cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
[ 48.982875] cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
[ 48.982879] cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
[ 48.982882] cx88[0]: card=34 -> ATI HDTV Wonder
[ 48.982885] cx88[0]: card=35 -> WinFast DTV1000-T
[ 48.982888] cx88[0]: card=36 -> AVerTV 303 (M126)
[ 48.982892] cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S
[ 48.982895] cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S
[ 48.982898] cx88[0]: card=39 -> KWorld DVB-S 100
[ 48.982902] cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[ 48.982906] cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[ 48.982910] cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro
[ 48.982913] cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702
[ 48.982917] cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[ 48.982921] cx88[0]: card=45 -> KWorld HardwareMpegTV XPert
[ 48.982924] cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid
[ 48.982927] cx88[0]: card=47 -> pcHDTV HD5500 HDTV
[ 48.982931] cx88[0]: card=48 -> Kworld MCE 200 Deluxe
[ 48.982934] cx88[0]: card=49 -> PixelView PlayTV P7000
[ 48.982938] cx88[0]: card=50 -> NPG Tech Real TV FM Top 10
[ 48.982941] cx88[0]: card=51 -> WinFast DTV2000 H
[ 48.982944] cx88[0]: card=52 -> Geniatech DVB-S
[ 48.982947] cx88[0]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[ 48.982951] cx88[0]: card=54 -> Norwood Micro TV Tuner
[ 48.982955] cx88[0]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[ 48.982959] cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[ 48.982964] CORE cx88[0]: subsystem: 107d:6618, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 48.982969] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
[ 49.008352] input: PC Speaker as /class/input/input2
[ 49.034218] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 49.053931] parport_pc 00:09: reported by Plug and Play ACPI
[ 49.053967] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 49.140099] cx88[0]/0: found at 0000:02:0d.0, rev: 5, irq: 19, latency: 32, mmio: 0xfc000000
[ 49.612082] cx2388x alsa driver version 0.0.6 loaded
[ 49.805155] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[ 49.816317] cx88[0]/0: registered device video0 [v4l2]
[ 49.816371] cx88[0]/0: registered device vbi0
[ 49.816392] tuner 0-0061: tuner type not set
[ 49.816524] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
[ 49.816554] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 50.429701] intel8x0_measure_ac97_clock: measured 52022 usecs
[ 50.429707] intel8x0: clocking to 41132
[ 50.432632] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[ 50.433230] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007
[ 50.437761] ACPI: PCI Interrupt 0000:02:0d.1[A] -> GSI 21 (level, low) -> IRQ 19
[ 50.437825] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 51.449606] lp0: using parport0 (interrupt-driven).
[ 51.516023] Adding 811240k swap on /dev/sda5. Priority:-1 extents:1 across:811240k
[ 51.866665] EXT3 FS on sda8, internal journal
[ 53.481029] No dock devices found.
[ 53.685098] input: Power Button (FF) as /class/input/input4
[ 53.693824] ACPI: Power Button (FF) [PWRF]
[ 53.758727] input: Power Button (CM) as /class/input/input5
[ 53.767285] ACPI: Power Button (CM) [PBTN]
[ 55.889704] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 57.316732] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 57.317298] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 57.317656] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 57.921407] ppdev: user-space parallel port driver
[ 58.667270] apm: BIOS not found.
[ 59.531706] Bluetooth: Core ver 2.11
[ 59.531941] NET: Registered protocol family 31
[ 59.531946] Bluetooth: HCI device and connection manager initialized
[ 59.531954] Bluetooth: HCI socket layer initialized
[ 59.552383] Bluetooth: L2CAP ver 2.8
[ 59.552392] Bluetooth: L2CAP socket layer initialized
[ 59.650054] Bluetooth: RFCOMM socket layer initialized
[ 59.650244] Bluetooth: RFCOMM TTY layer initialized
[ 59.650249] Bluetooth: RFCOMM ver 1.8
[ 64.691727] NET: Registered protocol family 17
[ 488.874339] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 488.874877] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 488.875228] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 923.557626] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 923.558194] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 923.558512] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 1035.538687] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 1035.539229] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 1035.539543] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 1609.930347] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 1609.930892] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 1609.931207] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 3717.275737] bttv: driver version 0.9.17 loaded
[ 3717.275746] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 4026.220564] bttv: driver version 0.9.17 loaded
[ 4026.220575] bttv: using 8 buffers with 2080k (520 pages) each for capture
cat /etc/modprobe.d/bttv:
cat: /etc/modprobe.d/bttv: No such file or directory